Generate SMBIOS tables for the RISC-V mach-virt.
Add CONFIG_SMBIOS=y to the RISC-V default config.
Set the default processor family in the type 4 table.
The implementation is based on the corresponding ARM and Loongson code.
With the patch the following firmware tables are provided:
etc/smbios/smbios-anchor
etc/smbios/smbios-tables
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-4-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A few months ago I submitted a patch to various lists, deprecating
"riscv,isa" with a lengthy commit message [0] that is now commit
aeb71e42caae ("dt-bindings: riscv: deprecate riscv,isa") in the Linux
kernel tree. Primarily, the goal was to replace "riscv,isa" with a new
set of properties that allowed for strictly defining the meaning of
various extensions, where "riscv,isa" was tied to whatever definitions
inflicted upon us by the ISA manual, which have seen some variance over
time.
Two new properties were introduced: "riscv,isa-base" and
"riscv,isa-extensions". The former is a simple string to communicate the
base ISA implemented by a hart and the latter an array of strings used
to communicate the set of ISA extensions supported, per the definitions
of each substring in extensions.yaml [1]. A beneficial side effect was
also the ability to define vendor extensions in a more "official" way,
as the ISA manual and other RVI specifications only covered the format
for vendor extensions in the ISA string, but not the meaning of vendor
extensions, for obvious reasons.
Add support for setting these two new properties in the devicetrees for
the various devicetree platforms supported by QEMU for RISC-V. The Linux
kernel already supports parsing ISA extensions from these new
properties, and documenting them in the dt-binding is a requirement for
new extension detection being added to the kernel.
A side effect of the implementation is that the meaning for elements in
"riscv,isa" and in "riscv,isa-extensions" are now tied together as they
are constructed from the same source. The same applies to the ISA string
provided in ACPI tables, but there does not appear to be any strict
definitions of meanings in ACPI land either.
Link: https://lore.kernel.org/qemu-riscv/20230702-eats-scorebook-c951f170d29f@spud/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/extensions.yaml [1]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240124-unvarying-foothold-9dde2aaf95d4@spud>
[ Changes by AF:
- Rebase on recent changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a lot of cases where a char or an uint32_t pointer is used once
to alloc a string/array, read/written during the function, and then
g_free() at the end. There's no pointer re-use - a single alloc, a
single g_free().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'soc_name' to the loop, and give it g_autofree, to avoid the manual
g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Put 'name' declaration inside the loop, with g_autofree, to avoid
manually doing g_free() in each iteration.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'clust_name' inside the loop, and g_autofree, to avoid having to
g_free() manually in each loop iteration.
'intc_phandles' is also g_autofreed to avoid another manual g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move all char pointers to the loop. Use g_autofree in all of them to
avoid the g_free() calls.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use g_autofree in 'dist_matrix' to avoid the manual g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'isa' char pointer isn't being freed after use.
Issue detected by Valgrind:
==38752== 128 bytes in 1 blocks are definitely lost in loss record 3,190 of 3,884
==38752== at 0x484280F: malloc (vg_replace_malloc.c:442)
==38752== by 0x5189619: g_malloc (gmem.c:130)
==38752== by 0x51A5BF2: g_strconcat (gstrfuncs.c:628)
==38752== by 0x6C1E3E: riscv_isa_string_ext (cpu.c:2321)
==38752== by 0x6C1E3E: riscv_isa_string (cpu.c:2343)
==38752== by 0x6BD2EA: build_rhct (virt-acpi-build.c:232)
==38752== by 0x6BD2EA: virt_acpi_build (virt-acpi-build.c:556)
==38752== by 0x6BDC86: virt_acpi_setup (virt-acpi-build.c:662)
==38752== by 0x9C8DC6: notifier_list_notify (notify.c:39)
==38752== by 0x4A595A: qdev_machine_creation_done (machine.c:1589)
==38752== by 0x61E052: qemu_machine_creation_done (vl.c:2680)
==38752== by 0x61E052: qmp_x_exit_preconfig.part.0 (vl.c:2709)
==38752== by 0x6220C6: qmp_x_exit_preconfig (vl.c:2702)
==38752== by 0x6220C6: qemu_init (vl.c:3758)
==38752== by 0x425858: main (main.c:47)
Fixes: ebfd392893 ("hw/riscv/virt: virt-acpi-build.c: Add RHCT Table")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
misa_mxl_max is common for all instances of a RISC-V CPU class so they
are better put into class.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-2-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU already implements zicbom (Cache Block Management Operations) and
zicboz (Cache Block Zero Operations). Commit 59cb29d6a5 ("target/riscv:
add Zicbop cbo.prefetch{i, r, m} placeholder") added placeholders for
what would be the instructions for zicbop (Cache Block Prefetch
Operations), which are now no-ops.
The RVA22U64 profile mandates zicbop, which means that applications that
run with this profile might expect zicbop to be present in the riscv,isa
DT and might behave badly if it's absent.
Adding zicbop as an extension will make our future RVA22U64
implementation more in line with what userspace expects and, if/when
cache block prefetch operations became relevant to QEMU, we already have
the extension flag to turn then on/off as needed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The interrupts-extended property of PLIC only has 2 * hart number
fields when KVM enabled, copy 4 * hart number fields to fdt will
expose some uninitialized value.
In this patch, I also refactor the code about the setting of
interrupts-extended property of PLIC for improved readability.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218090543.22353-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add PLIC structures for each socket in the MADT when system is
configured with PLIC as the external interrupt controller.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-14-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add basic IO controllers and devices like PCI, VirtIO and UART in the
ACPI namespace.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-13-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update the GPEX host bridge properties related to MMIO ranges with
values set for the virt machine.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-12-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MMU type information is available via MMU node in RHCT. Add this node in
RHCT.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-10-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When CMO related extensions like Zicboz, Zicbom and Zicbop are enabled, the
block size for those extensions need to be communicated via CMO node in
RHCT. Add CMO node in RHCT if any of those CMO extensions are detected.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-9-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add APLIC structures for each socket in the MADT when system is configured
with APLIC as the external wired interrupt controller.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-8-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add IMSIC structure in MADT when IMSIC is configured.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-7-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update the RINTC structure in MADT with AIA related fields.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-6-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some macros and static function related to IMSIC are defined in virt.c.
They are required in virt-acpi-build.c. So, make them public.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-5-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V also needs to use the same code to create fw_cfg in DSDT. So,
avoid code duplication by moving the code in arm and riscv to a device
specific file.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Set mc->valid_cpu_types so that the user specified CPU type can
be validated in machine_run_board_init(). We needn't to do it
by ourselves.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231204004726.483558-10-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-49-richard.henderson@linaro.org>
If you check the manual of SiFive E310 (https://cdn.sparkfun.com/assets/7/f/0/2/7/fe310-g002-manual-v19p05.pdf),
you can see in Figure 1 that the CLINT is connected to the real time clock, which also feeds the AON peripheral (they share the same clock).
In page 43, the docs also say that the timer registers of the CLINT count ticks from the rtcclk.
I am currently playing with bare metal applications both in QEMU and a physical SiFive E310 board and
I confirm that the CLINT clock in the physical board runs at 32.768 kHz.
In QEMU, the same app produces a completely different outcome, as sometimes a new CLINT interrupt is triggered before finishing other tasks.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1978
Signed-off-by: Rom\ufffd\ufffdn C\ufffd\ufffdrdenas <rcardenas.rod@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231117082840.55705-1-rcardenas.rod@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 49554856f0 fixed a problem, where TPM devices were not appearing
in the FDT, by delaying the FDT creation up until virt_machine_done().
This create a side effect (see gitlab #1925) - devices that need access
to the '/chosen' FDT node during realize() stopped working because, at
that point, we don't have a FDT.
This happens because our FDT creation is monolithic, but it doesn't need
to be. We can add the needed FDT components for realize() time and, at
the same time, do another FDT round where we account for dynamic sysbus
devices. In other words, the problem fixed by 49554856f0 could also be
fixed by postponing only create_fdt_sockets() and its dependencies,
leaving everything else from create_fdt() to be done during init().
Split the FDT creation in two parts:
- create_fdt(), now moved back to virt_machine_init(), will create FDT
nodes that doesn't depend on additional (dynamic) devices from the
sysbus;
- a new finalize_fdt() step is added, where create_fdt_sockets() and
friends is executed, accounting for the dynamic sysbus devices that
were added during realize().
This will make both use cases happy: TPM devices are still working as
intended, and devices such as 'guest-loader' have a FDT to work on
during realize().
Fixes: 49554856f0 ("riscv: Generate devicetree only after machine initialization is complete")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1925
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231110172559.73209-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
During the FDT generation use the existing mask containing the enabled
counters rather then generating a new one. Using the existing mask will
support the use of discontinuous counters.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20231031154000.18134-4-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicboz they're more likely to do 'grep -i zicboz' than 'grep -i
icboz'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicbom they're more likely to do 'grep -i zicbom' than 'grep -i
icbom'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicsr they're more likely to do 'grep -i zicsr' than 'grep -i icsr'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the files to a 'kvm' dir to promote more code separation between
accelerators and making our lives easier supporting build options such
as --disable-tcg.
Rename kvm.c to kvm-cpu.c to keep it in line with its TCG counterpart.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-2-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A build with --enable-debug and without KVM will fail as follows:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_riscv_virt.c.o: in function `virt_machine_init':
./qemu/build/../hw/riscv/virt.c:1465: undefined reference to `kvm_riscv_aia_create'
This happens because the code block with "if virt_use_kvm_aia(s)" isn't
being ignored by the debug build, resulting in an undefined reference to
a KVM only function.
Add a 'kvm_enabled()' conditional together with virt_use_kvm_aia() will
make the compiler crop the kvm_riscv_aia_create() call entirely from a
non-KVM build. Note that adding the 'kvm_enabled()' conditional inside
virt_use_kvm_aia() won't fix the build because this function would need
to be inlined multiple times to make the compiler zero out the entire
block.
While we're at it, use kvm_enabled() in all instances where
virt_use_kvm_aia() is checked to allow the compiler to elide these other
kvm-only instances as well.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: dbdb99948e ("target/riscv: select KVM AIA in riscv virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On a dtb dumped from the virt machine, dt-validate complains:
soc: pmu: {'riscv,event-to-mhpmcounters': [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280], [65563, 65563, 524280], [65569, 65569, 524280]], 'compatible': ['riscv,pmu']} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
That's pretty cryptic, but running the dtb back through dtc produces
something a lot more reasonable:
Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property
Moving the riscv,pmu node out of the soc bus solves the problem.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230727-groom-decline-2c57ce42841c@spud>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Select KVM AIA when the host kernel has in-kernel AIA chip support.
Since KVM AIA only has one APLIC instance, we map the QEMU APLIC
devices to KVM APLIC.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-6-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In this patch, we create the APLIC and IMSIC FDT helper functions and
remove M mode AIA devices when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-2-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
and replace the SDState::spi attribute with a test checking the
SDProto array of commands.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'aclint' property is being conditioned with tcg acceleration in
virt_machine_class_init(). But acceleration code starts later than the
class init of the board, meaning that tcg_enabled() will be always be
false during class_init(), and the option is never being declared even
when declaring TCG accel:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg,aclint=on
qemu-system-riscv64: Property 'virt-machine.aclint' not found
Fix it by moving the check from class_init() to machine_init(). Tune the
description to mention that the option is TCG only.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: c0716c81b ("hw/riscv/virt: Restrict ACLINT to TCG")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1823
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230811160224.440697-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"smp.cpus" means the number of online CPUs and "smp.max_cpus" means the
total number of CPUs.
riscv_numa_get_default_cpu_node_id() checks "smp.cpus" and the
"available CPUs" description in the next error message also indicates
online CPUs.
So report "smp.cpus" in error_report() instand of "smp.max_cpus".
Since "smp.cpus" is "unsigned int", use "%u".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230718080712.503333-1-zhao1.liu@linux.intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The absence of a satp mode in riscv_host_cpu_init() is causing the
following error:
$ ./qemu/build/qemu-system-riscv64 -machine virt,accel=kvm \
-m 2G -smp 1 -nographic -snapshot \
-kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
**
ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should not be
reached
Bail out! ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should
not be reached
Aborted
The error is triggered from create_fdt_socket_cpus() in hw/riscv/virt.c.
It's trying to get satp_mode_str for a NULL cpu->cfg.satp_mode.map.
For this KVM cpu we would need to inherit the satp supported modes
from the RISC-V host. At this moment this is not possible because the
KVM driver does not support it. And even when it does we can't just let
this broken for every other older kernel.
Since mmu-type is not a required node, according to [1], skip the
'mmu-type' FDT node if there's no satp_mode set. We'll revisit this
logic when we can get satp information from KVM.
[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/riscv/cpus.yaml
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230706101738.460804-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
fdt_load_addr was previously declared as uint32_t which doe not match
with the return type of riscv_compute_fdt_addr().
This patch modifies the fdt_load_addr type from a uint32_t to a uint64_t
to match the riscv_compute_fdt_addr() return type.
This fixes calculating the fdt address when DRAM is mapped to higher
64-bit address.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Lakshmi Bai Raja Subramanian <lakshmi.bai.rajasubramanian@bodhicomputing.com>
[ Change by AF:
- Cleanup commit title and message
]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <168872495192.6334.3845988291412774261-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the devicetree is created before machine initialization is complete,
it misses dynamic devices. Specifically, the tpm device is not added
to the devicetree file and is therefore not instantiated in Linux.
Load/create devicetree in virt_machine_done() to solve the problem.
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.c>
Fixes: 325b7c4e75 hw/riscv: Enable TPM backends
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706035937.1870483-1-linux@roeck-us.net>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Advanced Core Local Interruptor (ACLINT) device can
only be used with TCG. Check for TCG enabled instead of
KVM being not. Only add the property when TCG is used.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629121103.87733-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create the AON device when we realize the sifive_e machine.
This patch only implemented the functionality of the watchdog timer,
not all the functionality of the AON device.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230627141216.3962299-3-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, pflash devices can be configured only via -pflash
or -drive options. This is the legacy way and the
better way is to use -blockdev as in other architectures.
libvirt also has moved to use -blockdev method.
To support -blockdev option, pflash devices need to be
created in instance_init itself. So, update the code to
move the virt_flash_create() to instance_init. Also, use
standard interfaces to detect whether pflash0 is
configured or not.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230601045910.18646-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, virt machine supports two pflash instances each with
32MB size. However, the first pflash is always assumed to
contain M-mode firmware and reset vector is set to this if
enabled. Hence, for S-mode payloads like EDK2, only one pflash
instance is available for use. This means both code and NV variables
of EDK2 will need to use the same pflash.
The OS distros keep the EDK2 FW code as readonly. When non-volatile
variables also need to share the same pflash, it is not possible
to keep it as readonly since variables need write access.
To resolve this issue, the code and NV variables need to be separated.
But in that case we need an extra flash. Hence, modify the convention
for non-KVM guests such that, pflash0 will contain the M-mode FW
only when "-bios none" option is used. Otherwise, pflash0 will contain
the S-mode payload FW. This enables both pflash instances available
for EDK2 use.
When KVM is enabled, pflash0 is always assumed to contain the
S-mode payload firmware only.
Example usage:
1) pflash0 containing M-mode FW
qemu-system-riscv64 -bios none -pflash <mmode_fw> -machine virt
or
qemu-system-riscv64 -bios none \
-drive file=<mmode_fw>,if=pflash,format=raw,unit=0 -machine virt
2) pflash0 containing S-mode payload like EDK2
qemu-system-riscv64 -pflash <smode_fw_code> -pflash <smode_vars> -machine virt
or
qemu-system-riscv64 -bios <opensbi_fw> \
-pflash <smode_fw_code> \
-pflash <smode_vars> \
-machine virt
or
qemu-system-riscv64 -bios <opensbi_fw> \
-drive file=<smode_fw_code>,if=pflash,format=raw,unit=0,readonly=on \
-drive file=<smode_fw_vars>,if=pflash,format=raw,unit=1 \
-machine virt
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230601045910.18646-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
