In a narrow but common case, the user is the only author of a branch and
doesn't mind overwriting the corresponding branch on the remote. This
workflow is especially common on GitHub, GitLab, and Gerrit, which keep
a permanent record of every version of a branch that is pushed while a
pull request is open for that branch. On those platforms, force-pushing
is encouraged and is analogous to emailing a new version of a patchset.
When giving advice about divergent branches, tell the user about
`git pull`, but don't unconditionally instruct the user to do it. A less
prescriptive message will help prevent users from thinking that they are
required to create an integrated history instead of simply replacing the
previous history. Also, don't put `git pull` in an awkward
parenthetical, because `git pull` can always be used to reconcile
branches and is the normal way to do so.
Due to the difficulty of knowing which command for force-pushing is best
suited to the user's situation, no specific advice is given about
force-pushing. Instead, the user is directed to the Git documentation to
read about possible ways forward that do not involve integration.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user is in the middle of making a commit, they are not yet at
the point where they are ready to think about integrating their local
branch with the corresponding remote branch or force-pushing over the
remote branch. Don't include advice on how to deal with divergent
branches in the commit template, to avoid giving the impression that the
divergence needs to be dealt with immediately. Similar advice will be
printed when it is most relevant, that is, if the user does try to push
without first reconciling the two branches.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking, the function `collect_pack_filenames()` is responsible
for collecting the set of existing packs in the repository, and
partitioning them into "kept" (if the pack has a ".keep" file or was
given via `--keep-pack`) and "nonkept" (otherwise) lists.
This function comes from the original C port of git-repack.sh from back
in a1bbc6c017 (repack: rewrite the shell script in C, 2013-09-15),
where it first appears as `get_non_kept_pack_filenames()`. At the time,
the implementation was a fairly direct translation from the relevant
portion of git-repack.sh, which looped over the results of
find "$PACKDIR" -type f -name '*.pack'
either ignoring the pack as kept, or adding it to the list of existing
packs.
So the choice to directly translate this function in terms of
`readdir()` in a1bbc6c017 made sense. At the time, it was possible to
refine the C version in terms of packed_git structs, but was never done.
However, manually enumerating a repository's packs via `readdir()` is
confusing and error-prone. It leads to frustrating inconsistencies
between which packs Git considers to be part of a repository (i.e.,
could be found in the list of packs from `get_all_packs()`), and which
packs `collect_pack_filenames()` considers to meet the same criteria.
This bit us in 73320e49ad (builtin/repack.c: only collect fully-formed
packs, 2023-06-07), and again in the previous commit.
Prevent these issues from biting us in the future by implementing the
`collect_pack_filenames()` function by looping over an array of pointers
to `packed_git` structs, ensuring that we use the same criteria to
determine the set of available packs.
One gotcha here is that we have to ignore non-local packs, since the
original version of `collect_pack_filenames()` only looks at the local
pack directory to collect existing packs.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 73320e49ad (builtin/repack.c: only collect fully-formed packs,
2023-06-07), we switched the check for which packs to collect by
starting at the .idx files and looking for matching .pack files. This
avoids trying to repack pack-files that have not had their pack-indexes
installed yet.
However, it does cause maintenance to halt if we find the (problematic,
but not insurmountable) case of a .idx file without a corresponding
.pack file. In an environment where packfile maintenance is a critical
function, such a hard stop is costly and requires human intervention to
resolve (by deleting the .idx file).
This was not the case before. We successfully repacked through this
scenario until the recent change to scan for .idx files.
Further, if we are actually in a case where objects are missing, we
detect this at a different point during the reachability walk.
In other cases, Git prepares its list of packfiles by scanning .idx
files and then only adds it to the packfile list if the corresponding
.pack file exists. It even does so without a warning! (See
add_packed_git() in packfile.c for details.)
This case is much less likely to occur than the failures seen before
73320e49ad. Packfiles are "installed" by writing the .pack file before
the .idx and that process can be interrupted. Packfiles _should_ be
deleted by deleting the .idx first, followed by the .pack file, but
unlink_pack_path() does not do this: it deletes the .pack _first_,
allowing a window where this process could be interrupted. We leave the
consideration of changing this order as a separate concern. Knowing that
this condition is possible from interrupted Git processes and not other
tools lends some weight that Git should be more flexible around this
scenario.
Add a check to see if the .pack file exists before adding it to the list
for repacking. This will stop a number of maintenance failures seen in
production but fixed by deleting the .idx files.
This brings us closer to the case before 73320e49ad in that 'git
repack' will not fail when there is an orphaned .idx file, at least, not
due to the way we scan for packfiles. In the case that the .pack file
was erroneously deleted without copies of its objects in other installed
packfiles, then 'git repack' will fail due to the reachable object walk.
This does resolve the case where automated repacks will no longer be
halted on this case. The tests in t7700 show both these successful
scenarios and the case of failing if the .pack was truly required.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that `refs_for_each_fullref_in()` has the ability to avoid
enumerating references matching certain pattern(s), use that to avoid
visiting hidden refs when constructing the ref advertisement via
receive-pack.
Note that since this exclusion is best-effort, we still need
`show_ref_cb()` to check whether or not each reference is hidden or not
before including it in the advertisement.
As was the case when applying this same optimization to `upload-pack`,
`receive-pack`'s reference advertisement phase can proceed much quicker
by avoiding enumerating references that will not be part of the
advertisement.
(Below, we're still using linux.git with one hidden refs/pull/N ref per
commit):
$ hyperfine -L v ,.compile 'git{v} -c transfer.hideRefs=refs/pull receive-pack --advertise-refs .git'
Benchmark 1: git -c transfer.hideRefs=refs/pull receive-pack --advertise-refs .git
Time (mean ± σ): 89.1 ms ± 1.7 ms [User: 82.0 ms, System: 7.0 ms]
Range (min … max): 87.7 ms … 95.5 ms 31 runs
Benchmark 2: git.compile -c transfer.hideRefs=refs/pull receive-pack --advertise-refs .git
Time (mean ± σ): 4.5 ms ± 0.2 ms [User: 0.5 ms, System: 3.9 ms]
Range (min … max): 4.1 ms … 5.6 ms 508 runs
Summary
'git.compile -c transfer.hideRefs=refs/pull receive-pack --advertise-refs .git' ran
20.00 ± 1.05 times faster than 'git -c transfer.hideRefs=refs/pull receive-pack --advertise-refs .git'
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subsequent commits, it will be convenient to have a 'const char **'
of hidden refs (matching `transfer.hiderefs`, `uploadpack.hideRefs`,
etc.), instead of a `string_list`.
Convert spots throughout the tree that store the list of hidden refs
from a `string_list` to a `strvec`.
Note that in `parse_hide_refs_config()` there is an ugly const-cast used
to avoid an extra copy of each value before trimming any trailing slash
characters. This could instead be written as:
ref = xstrdup(value);
len = strlen(ref);
while (len && ref[len - 1] == '/')
ref[--len] = '\0';
strvec_push(hide_refs, ref);
free(ref);
but the double-copy (once when calling `xstrdup()`, and another via
`strvec_push()`) is wasteful.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `for-each-ref`, it is sometimes convenient for the caller to
be able to exclude certain parts of the references.
For example, if there are many `refs/__hidden__/*` references, the
caller may want to emit all references *except* the hidden ones.
Currently, the only way to do this is to post-process the output, like:
$ git for-each-ref --format='%(refname)' | grep -v '^refs/hidden/'
Which is do-able, but requires processing a potentially large quantity
of references.
Teach `git for-each-ref` a new `--exclude=<pattern>` option, which
excludes references from the results if they match one or more excluded
patterns.
This patch provides a naive implementation where the `ref_filter` still
sees all references (including ones that it will discard) and is left to
check whether each reference matches any excluded pattern(s) before
emitting them.
By culling out references we know the caller doesn't care about, we can
avoid allocating memory for their storage, as well as spending time
sorting the output (among other things). Even the naive implementation
provides a significant speed-up on a modified copy of linux.git (that
has a hidden ref pointing at each commit):
$ hyperfine \
'git.compile for-each-ref --format="%(objectname) %(refname)" | grep -vE "[0-9a-f]{40} refs/pull/"' \
'git.compile for-each-ref --format="%(objectname) %(refname)" --exclude refs/pull/'
Benchmark 1: git.compile for-each-ref --format="%(objectname) %(refname)" | grep -vE "[0-9a-f]{40} refs/pull/"
Time (mean ± σ): 820.1 ms ± 2.0 ms [User: 703.7 ms, System: 152.0 ms]
Range (min … max): 817.7 ms … 823.3 ms 10 runs
Benchmark 2: git.compile for-each-ref --format="%(objectname) %(refname)" --exclude refs/pull/
Time (mean ± σ): 106.6 ms ± 1.1 ms [User: 99.4 ms, System: 7.1 ms]
Range (min … max): 104.7 ms … 109.1 ms 27 runs
Summary
'git.compile for-each-ref --format="%(objectname) %(refname)" --exclude refs/pull/' ran
7.69 ± 0.08 times faster than 'git.compile for-each-ref --format="%(objectname) %(refname)" | grep -vE "[0-9a-f]{40} refs/pull/"'
Subsequent patches will improve on this by avoiding visiting excluded
sections of the `packed-refs` file in certain cases.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did not bother to clean up at all in `git branch` or `git tag`, and
`git for-each-ref` only cleans up a couple of members.
Add and call `ref_filter_clear()` when cleaning up a `struct
ref_filter`. Running this patch (without any test changes) indicates a
couple of now leak-free tests. This was found by running:
$ make SANITIZE=leak
$ make -C t GIT_TEST_PASSING_SANITIZE_LEAK=check GIT_TEST_OPTS=--immediate
(Note that the `reachable_from` and `unreachable_from` lists should be
cleaned as they are used. So this is just covering any case where we
might bail before running the reachability check.)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a sane initialization value for `struct ref_filter`, which in a
subsequent patch will be used to initialize a new field.
In the meantime, ensure that the `ref_filter` struct used in the
test-helper's `cmd__reach()` is zero-initialized. The lack of
initialization is OK, since `commit_contains()` only looks at the single
`with_commit_tag_algo` field that *is* initialized directly above.
So this does not fix a bug, but rather prevents one from biting us in
the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous commit, address a bug where `git
fsck` produces output when calling `git multi-pack-index verify` even
when invoked with `--no-progress`.
$ git.compile fsck --connectivity-only --no-progress --no-dangling
Verifying OID order in multi-pack-index: 100% (605677/605677), done.
Sorting objects by packfile: 100% (605678/605678), done.
Verifying object offsets: 100% (605678/605678), done.
The three lines produced by `git fsck` come from `git multi-pack-index
verify`, but should be squelched due to `--no-progress`.
The MIDX machinery learned to generate these progress messages as early
as 430efb8a74 (midx: add progress indicators in multi-pack-index
verify, 2019-03-21), but did not respect `--progress` or `--no-progress`
until ad60096d1c (midx: honor the MIDX_PROGRESS flag in
verify_midx_file, 2019-10-21).
But the `git multi-pack-index verify` step was added to fsck in
66ec0390e7 (fsck: verify multi-pack-index, 2018-09-13), pre-dating any
of the above patches.
Pass `--[no-]progress` as appropriate to ensure that we don't produce
output when told not to.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since e0fd51e1d7 (fsck: verify commit-graph, 2018-06-27), `fsck` runs
`git commit-graph verify` to check the integrity of any commit-graph(s).
Originally, the `git commit-graph verify` step would always print to
stdout/stderr, regardless of whether or not `fsck` was invoked with
`--[no-]progress` or not. But in 7371612255 (commit-graph: add
--[no-]progress to write and verify, 2019-08-26), the commit-graph
machinery learned the `--[no-]progress` option, though `fsck` was not
updated to pass this new flag (or not).
This led to seeing output from running `git fsck`, even with
`--no-progress` on repositories that have a commit-graph:
$ git.compile fsck --connectivity-only --no-progress --no-dangling
Verifying commits in commit graph: 100% (4356/4356), done.
Verifying commits in commit graph: 100% (131912/131912), done.
Ensure that `fsck` passes `--[no-]progress` as appropriate when calling
`git commit-graph verify`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places failed to differenciate the case where the index is
truly empty (nothing added) and we haven't yet read from the
on-disk index file, which have been corrected.
* js/empty-index-fixes:
commit -a -m: allow the top-level tree to become empty again
split-index: accept that a base index can be empty
do_read_index(): always mark index as initialized unless erroring out
The tree_entry_interesting() function takes base_offset, allowing
its callers to potentially pass a non-zero number to skip the early
part of the path string.
The feature is never exercised and we do not even know what bugs are
lurking there, as all callers pass 0 to the parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-tree has two prefixes: The one handed to cmd_ls_tree(), i.e. the
current subdirectory in the repository (if any) and the "display" prefix
used by the show_tree_*() functions. The option --full-name clears the
last one, i.e. it shows full paths, and --full-tree clears both, i.e. it
acts as if the command was started in the root of the repository.
The show_tree_*() functions use the ls_tree_options members chomp_prefix
and ls_tree_prefix to determine their prefix values. Calculate it once
in cmd_ls_tree() instead, once the main prefix value is finalized.
This allows chomp_prefix to become a local variable. Stop using
strlen(3) to determine its initial value -- we only care whether we got
a non-empty string, not precisely how long it is.
Rename ls_tree_prefix to prefix to demonstrate that we converted all
users and because the ls_tree_ part is no longer necessary since
030a3d5d9e (ls-tree: use a "struct options", 2023-01-12) turned it from
a global variable to a struct member.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
'git notes append' was taught '--separator' to specify string to insert
between paragraphs.
* tl/notes-separator:
notes: introduce "--no-separator" option
notes.c: introduce "--[no-]stripspace" option
notes.c: append separator instead of insert by pos
notes.c: introduce '--separator=<paragraph-break>' option
t3321: add test cases about the notes stripspace behavior
notes.c: use designated initializers for clarity
notes.c: cleanup 'strbuf_grow' call in 'append_edit'
Move functions that are not about pure string manipulation out of
strbuf.[ch]
* cw/strbuf-cleanup:
strbuf: remove global variable
path: move related function to path
object-name: move related functions to object-name
credential-store: move related functions to credential-store file
abspath: move related functions to abspath
strbuf: clarify dependency
strbuf: clarify API boundary
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While functions like starts_with() probably should not belong in the
boundaries of the strbuf library, this commit focuses on first splitting
out headers from git-compat-util.h.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more "git var" for toolsmiths to learn various locations Git is
configured with either via the configuration or hardcoded defaults.
* bc/more-git-var:
var: add config file locations
var: add attributes files locations
attr: expose and rename accessor functions
var: adjust memory allocation for strings
var: format variable structure with C99 initializers
var: add support for listing the shell
t: add a function to check executable bit
var: mark unused parameters in git_var callbacks
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
When reporting a problem, `git fsck` emits a message such as:
missing blob 1234abcd (:file)
However, this can be ambiguous when the problem is detected in the index
of a worktree other than the one in which `git fsck` was invoked. To
address this shortcoming, 592ec63b38 (fsck: mention file path for index
errors, 2023-02-24) enhanced the output to mention the path of the index
when the problem is detected in some other worktree:
missing blob 1234abcd (.git/worktrees/wt/index:file)
Unfortunately, the variable in fsck_index() which controls whether the
index path should be shown is misleadingly named "is_main_index" which
can be misunderstood as referring to the main worktree (i.e. the one
housing the .git/ repository) rather than to the current worktree (i.e.
the one in which `git fsck` was invoked). Avoid such potential confusion
by choosing a name more reflective of its actual purpose.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 03267e8656 (commit: discard partial cache before (re-)reading it,
2022-11-08), a memory leak was plugged by discarding any partial index
before re-reading it.
The problem with this memory leak fix is that it was based on an
incomplete understanding of the logic introduced in 7168624c35 (Do not
generate full commit log message if it is not going to be used,
2007-11-28).
That logic was introduced to add a shortcut when committing without
editing the commit message interactively. A part of that logic was to
ensure that the index was read into memory:
if (!active_nr && read_cache() < 0)
die(...)
Translation to English: If the index has not yet been read, read it, and
if that fails, error out.
That logic was incorrect, though: It used `!active_nr` as an indicator
that the index was not yet read. Usually this is not a problem because
in the vast majority of instances, the index contains at least one
entry.
And it was natural to do it this way because at the time that condition
was introduced, the `index_state` structure had no explicit flag to
indicate that it was initialized: This flag was only introduced in
913e0e99b6 (unpack_trees(): protect the handcrafted in-core index from
read_cache(), 2008-08-23), but that commit did not adjust the code path
where no index file was found and a new, pristine index was initialized.
Now, when the index does not contain any entry (which is quite
common in Git's test suite because it starts quite a many repositories
from scratch), subsequent calls to `do_read_index()` will mistake the
index not to be initialized, and read it again unnecessarily.
This is a problem because after initializing the empty index e.g. the
`cache_tree` in that index could have been initialized before a
subsequent call to `do_read_index()` wants to ensure an initialized
index. And if that subsequent call mistakes the index not to have been
initialized, it would lead to leaked memory.
The correct fix for that memory leak is to adjust the condition so that
it does not mistake `active_nr == 0` to mean that the index has not yet
been read.
Using the `initialized` flag instead, we avoid that mistake, and as a
bonus we can fix a bug at the same time that was introduced by the
memory leak fix: When deleting all tracked files and then asking `git
commit -a -m ...` to commit the result, Git would internally update the
index, then discard and re-read the index undoing the update, and fail
to commit anything.
This fixes https://github.com/git-for-windows/git/issues/4462
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass config_context when parsing CLI config. To provide the .kvi member,
refactor out kvi_from_param() from the logic that caches CLI config in
configsets. Now that config_context and config_context.kvi is always
present when config machinery calls config callbacks, plumb "kvi" so
that we can remove all calls of current_config_scope() except for
trace2/*.c (which will be handled in a later commit), and remove all
other current_config_*() (the functions themselves and their calls).
Note that this results in .kvi containing a different, more complete
set of information than the mocked up "struct config_source" in
git_config_from_parameters().
Plumbing "kvi" reveals a few places where we've been doing the wrong
thing:
* git_config_parse_parameter() hasn't been setting config source
information, so plumb "kvi" there too.
* Several sites in builtin/config.c have been calling current_config_*()
functions outside of config callbacks (indirectly, via the
format_config() helper), which means they're reading state that isn't
set correctly:
* "git config --get-urlmatch --show-scope" iterates config to collect
values, but then attempts to display the scope after config
iteration, causing the "unknown" scope to be shown instead of the
config file's scope. It's clear that this wasn't intended: we knew
that "--get-urlmatch" couldn't show config source metadata, which is
why "--show-origin" was marked incompatible with "--get-urlmatch"
when it was introduced [1]. It was most likely a mistake that we
allowed "--show-scope" to sneak through.
Fix this by copying the "kvi" value in the collection phase so that
it can be read back later. This means that we can now support "git
config --get-urlmatch --show-origin", but that is left unchanged
for now.
* "git config --default" doesn't have config source metadata when
displaying the default value, so "--show-scope" also results in
"unknown", and "--show-origin" results in a BUG(). Fix this by
treating the default value as if it came from the command line (e.g.
like we do with "git -c" or "git config --file"), using
kvi_from_param().
[1] https://lore.kernel.org/git/20160205112001.GA13397@sigill.intra.peff.net/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass config_context to config callbacks in configset_iter(), trivially
setting the .kvi member to the cached key_value_info. Then, in config
callbacks that are only used with configsets, use the .kvi member to
replace calls to current_config_*(), and delete current_config_line()
because it has no remaining callers.
This leaves builtin/config.c and config.c as the only remaining users of
current_config_*().
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_color_default_config() is a shorthand for calling two other config
callbacks. There are no other non-static functions that do this and it
will complicate our refactoring of config_fn_t so inline it instead.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like with attributes files, sometimes programs would like to know
the location of configuration files at the global or system levels.
However, it isn't always clear where these may live, especially for the
system file, which may have been hard-coded at compile time or computed
dynamically based on the runtime prefix.
Since other parties cannot intuitively know how Git was compiled and
where it looks for these files, help them by providing variables that
can be queried. Because we have multiple paths for global config
values, print them in order from highest to lowest priority, and be sure
to split on newlines so that "git var -l" produces two entries for the
global value.
However, be careful not to split all values on newlines, since our
editor values could well contain such characters, and we don't want to
split them in such a case.
Note in the documentation that some values may contain multiple paths
and that callers should be prepared for that fact. This helps people
write code that will continue to work in the event we allow multiple
items elsewhere in the future.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there are some programs which would like to read and parse
the gitattributes files at the global or system levels. However, it's
not always obvious where these files live, especially for the system
file, which may have been hard-coded at compile time or computed
dynamically based on the runtime prefix.
It's not reasonable to expect all callers of Git to intuitively know
where the Git distributor or user has configured these locations to
be, so add some entries to allow us to determine their location. Honor
the GIT_ATTR_NOSYSTEM environment variable if one is specified. Expose
the accessor functions in a way that we can reuse them from within the
var code.
In order to make our paths consistent on Windows and also use the same
form as paths use in "git rev-parse", let's normalize the path before we
return it. This results in Windows-style paths that use slashes, which
is convenient for making our tests function in a consistent way across
platforms. Note that this requires that some of our values be freed, so
let's add a flag about whether the value needs to be freed and use it
accordingly.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, all of our values are constants whose allocation is managed
elsewhere. However, in the future, we'll have some variables whose
memory we will need to free. To keep things consistent, let's make each
of our functions allocate its own memory and make the caller responsible
for freeing it.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, we have only two items in our variable struct. However, in
the future, we're going to add two more items. To help keep our diffs
nice and tidy and make this structure easier to read, switch to use
C99-style initializers for our data.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On most Unix systems, finding a suitable shell is easy: one simply uses
"sh" with an appropriate PATH value. However, in many Windows
environments, the shell is shipped alongside Git, and it may or may not
be in PATH, even if Git is.
In such an environment, it can be very helpful to query Git for the
shell it's using, since other tools may want to use the same shell as
well. To help them out, let's add a variable, GIT_SHELL_PATH, that
points to the location of the shell.
On Unix, we know our shell must be executable to be functional, so
assume that the distributor has correctly configured their environment,
and use that as a basic test. On Git for Windows, we know that our
shell will be one of a few fixed values, all of which end in "sh" (such
as "bash"). This seems like it might be a nice test on Unix as well,
since it is customary for all shells to end in "sh", but there probably
exist such systems that don't have such a configuration, so be careful
here not to break them.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We abstract the set of variables into a table, with a "read" callback to
provide the value of each. Each callback takes a "flag" argument, but
most callbacks don't make use of it.
This flag is a bit odd. It may be set to IDENT_STRICT, which make sense
for ident-based callbacks, but is just confusing for things like
GIT_EDITOR.
At first glance, it seems like this is just a hack to let us directly
stick the generic git_committer_info() and git_author_info() functions
into our table. And we'd be better off to wrap them with local functions
which pass IDENT_STRICT, and have our callbacks take no option at all.
But that doesn't quite work. We pass IDENT_STRICT when the caller asks
for a specific variable, but otherwise do not (so that "git var -l" does
not bail if the committer ident cannot be formed).
So we really do need to pass in the flag to each invocation, even if the
individual callback doesn't care about it. Let's mark the unused ones so
that -Wunused-parameter does not complain. And while we're here, let's
rename them so that it's clear that the flag values we get will be from
the IDENT_* set. That may prevent confusion for future readers of the
code.
Another option would be to define our own local "strict" flag for the
callbacks, and then have wrappers that translate that to IDENT_STRICT
where it matters. But that would be more boilerplate for little gain
(most functions would still ignore the "strict" flag anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid breakage of "git pack-objects --cruft" due to inconsistency
between the way the code enumerates packfiles in the repository.
* tb/collect-pack-filenames-fix:
builtin/repack.c: only collect fully-formed packs
When "git commit --trailer=..." invokes the interpret-trailers
machinery, it knows what it feeds to interpret-trailers is a full
log message without any patch, but failed to express that by
passing the "--no-divider" option, which has been corrected.
* jk/commit-use-no-divider-with-interpret-trailers:
commit: pass --no-divider to interpret-trailers
Leakfixes
* rj/leakfixes:
tests: mark as passing with SANITIZE=leak
config: fix a leak in git_config_copy_or_rename_section_in_file
branch: fix a leak in cmd_branch
branch: fix a leak in setup_tracking
rev-parse: fix a leak with --abbrev-ref
branch: fix a leak in setup_tracking
branch: fix a leak in check_tracking_branch
branch: fix a leak in inherit_tracking
branch: fix a leak in dwim_and_setup_tracking
remote: fix a leak in query_matches_negative_refspec
config: fix a leak in git_config_copy_or_rename_section_in_file
The reimplemented "git add -i" did not honor color.ui configuration.
* ds/add-i-color-configuration-fix:
add: test use of brackets when color is disabled
add: check color.ui for interactive add
"git cat-file --batch" and friends learned "-Z" that uses NUL
delimiter for both input and output.
* ps/cat-file-null-output:
cat-file: add option '-Z' that delimits input and output with NUL
cat-file: simplify reading from standard input
strbuf: provide CRLF-aware helper to read until a specified delimiter
t1006: modernize test style to use `test_cmp`
t1006: don't strip timestamps from expected results
Introduce a mechanism to disable replace refs globally and per
repository.
* ds/disable-replace-refs:
repository: create read_replace_refs setting
replace-objects: create wrapper around setting
repository: create disable_replace_refs()
'git worktree add' learned how to create a worktree based on an
orphaned branch with `--orphan`.
* ja/worktree-orphan:
worktree add: emit warn when there is a bad HEAD
worktree add: extend DWIM to infer --orphan
worktree add: introduce "try --orphan" hint
worktree add: add --orphan flag
t2400: add tests to verify --quiet
t2400: refactor "worktree add" opt exclusion tests
t2400: cleanup created worktree in test
worktree add: include -B in usage docs
This creates a new fsmonitor-ll.h with most of the functions from
fsmonitor.h, though it leaves three inline functions where they were.
Two-thirds of the files that previously included fsmonitor.h did not
need those three inline functions or the six extra includes those inline
functions required, so this allows them to only include the lower level
header.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A long term (but rather minor) pet-peeve of mine was the name
ll-merge.[ch]. I thought it made it harder to realize what stuff was
related to merging when I was working on the merge machinery and trying
to improve it.
Further, back in d1cbe1e6d8 ("hash-ll.h: split out of hash.h to remove
dependency on repository.h", 2023-04-22), we have split the portions of
hash.h that do not depend upon repository.h into a "hash-ll.h" (due to
the recommendation to use "ll" for "low-level" in its name[1], but which
I used as a suffix precisely because of my distaste for "ll-merge").
When we discussed adding additional "*-ll.h" files, a request was made
that we use "ll" consistently as either a prefix or a suffix. Since it
is already in use as both a prefix and a suffix, the only way to do so
is to rename some files.
Besides my distaste for the ll-merge.[ch] name, let me also note that
the files
ll-fsmonitor.h, ll-hash.h, ll-merge.h, ll-object-store.h, ll-read-cache.h
would have essentially nothing to do with each other and make no sense
to group. But giving them the common "ll-" prefix would group them. Using
"-ll" as a suffix thus seems just much more logical to me. Rename
ll-merge.[ch] to merge-ll.[ch] to achieve this consistency, and to
ensure we get a more logical grouping of files.
[1] https://lore.kernel.org/git/kl6lsfcu1g8w.fsf@chooglen-macbookpro.roam.corp.google.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The include of wildmatch.h in git-compat-util.h was added in cebcab189a
(Makefile: add USE_WILDMATCH to use wildmatch as fnmatch, 2013-01-01) as
a way to be able to compile-time force any calls to fnmatch() to instead
invoke wildmatch(). The defines and inline function were removed in
70a8fc999d (stop using fnmatch (either native or compat), 2014-02-15),
and this include in git-compat-util.h has been unnecessary ever since.
Remove the include from git-compat-util.h, but add it to the .c files
that had omitted the direct #include they needed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that a few .c files under builtin/ were
depending upon some headers but had forgotten to #include them. Add the
missing direct includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a preload-index.c file; move the declarations for the
functions in that file into a new preload-index.h. These were
previously split between cache.h and repository.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note in particular that this reverses the decision made in 118a2e8bde
("cache: move ensure_full_index() to cache.h", 2021-04-01).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function add_files_to_cache(), plus associated helper functions,
were defined in builtin/add.c, but also shared with builtin/checkout.c
and builtin/commit.c. Move these shared functions to read-cache.c.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function add_files_to_cache() is used by all three of builtin/{add,
checkout, commit}.c. That suggests this is common library code, and
should be moved somewhere else, like read-cache.c. However, the
function and its helpers made use of two global variables that made
straight code movement difficult:
* the_index
* include_sparse
The latter was perhaps more problematic since it was only accessible in
builtin/add.c but was still affecting builtin/checkout.c and
builtin/commit.c without this fact being very clear from the code. I'm
not sure if the other two callers would want to add a `--sparse` flag
similar to add.c to get non-default behavior, but exposing this
dependence will help if we ever decide we do want to add such a flag.
Modify add_files_to_cache() and its helpers to accept the necessary
arguments instead of relying on globals.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function overlay_tree_on_index(), plus associated helper functions,
were defined in builtin/ls-files.c, but also shared with
builtin/commit.c. Move these shared functions to read-cache.c.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions init_db() and initialize_repository_version() were shared
by builtin/init-db.c and builtin/clone.c, and declared in cache.h.
Move these functions, plus their several helpers only used by these
functions, to setup.[ch].
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like the parent commit, this commit was prompted by a desire to
move the functions which builtin/init-db.c and builtin/clone.c share out
of the former file and into setup.c. A secondary issue that made it
difficult was the init_shared_repository global variable; replace it
with a simple parameter that is passed to the relevant functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit was prompted by a desire to move the functions which
builtin/init-db.c and builtin/clone.c share out of the former file and
into setup.c. One issue that made it difficult was the
init_is_bare_repository global variable.
init_is_bare_repository's sole use in life it to cache a value in
init_db(), and then be used in create_default_files(). This is a bit
odd since init_db() directly calls create_default_files(), and is the
only caller of that function. Convert the global to a simple function
parameter instead.
(Of course, this doesn't fix the fact that this value is then ignored by
create_default_files(), as noted in a big TODO comment in that function,
but it at least includes no behavioral change other than getting rid of
a very questionable global variable.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comments in create_default_files() talks about reading config from
the config file in the specified `--templates` directory, which leads to
the question of whether core.bare could be set in such a config file and
thus whether the code is doing the right thing. It turns out, that it
doesn't; it unconditionally ignores core.bare in the config file in any
--templates directory. It is not clear to me that fixing it can be done
within this function; it seems to occur too late:
* create_default_files() is called by init_db()
* init_db() is called by both builtin/{clone.c,init-db.c}
* both callers of init_db() call set_git_work_tree() before init_db()
and in order to actual affect whether a repository is bear, we'd need to
somewhere reset these values, not just the is_bare_repository_cfg
setting.
I do not want to open this can of worms at this time; I'm trying to
clean up some headers, for which I need to move some functions, for
which I need to clean up some globals, and that's far enough down the
rabbit hole. So, simply document the issue with a careful TODO comment
and a few testcases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces a new option "--[no-]stripspace" to git notes
append, git notes edit, and git notes add. This option allows users to
control whether the note message need to stripped out.
For the consideration of backward compatibility, let's look at the
behavior about "stripspace" in "git notes" command:
1. "Edit Message" case: using the default editor to edit the note
message.
In "edit" case, the edited message will always be stripped out, the
implementation which can be found in the "prepare_note_data()". In
addition, the "-c" option supports to reuse an existing blob as a
note message, then open the editor to make a further edition on it,
the edited message will be stripped.
This commit doesn't change the default behavior of "edit" case by
using an enum "notes_stripspace", only when "--no-stripspace" option
is specified, the note message will not be stripped out. If you do
not specify the option or you specify "--stripspace", clearly, the
note message will be stripped out.
2. "Assign Message" case: using the "-m"/"-F"/"-C" option to specify the
note message.
In "assign" case, when specify message by "-m" or "-F", the message
will be stripped out by default, but when specify message by "-C",
the message will be copied verbatim, in other word, the message will
not be stripped out. One more thing need to note is "the order of
the options matter", that is, if you specify "-C" before "-m" or
"-F", the reused message by "-C" will be stripped out together,
because everytime concat "-m" or "-F" message, the concated message
will be stripped together. Oppositely, if you specify "-m" or "-F"
before "-C", the reused message by "-C" will not be stripped out.
This commit doesn't change the default behavior of "assign" case by
extending the "stripspace" field in "struct note_msg", so we can
distinguish the different behavior of "-m"/"-F" and "-C" options
when we need to parse and concat the message.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename "insert_separator" to "append_separator" and also remove the
"postion" argument, this serves two purpose:
The first is that when specifying more than one "-m" ( like "-F", etc)
to "git notes add" or "git notes append", the order of them matters,
which means we need to append the each separator and message in turn,
so we don't have to make the caller specify the position, the "append"
operation is enough and clear.
The second is that when we execute the "git notes append" subcommand,
we need to combine the "prev_note" and "current_note" to get the
final result. Before, we inserted a newline character at the beginning
of "current_note". Now, we will append a newline to the end of
"prev_note" instead, this will give the consisitent results.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding new notes or appending to an existing notes, we will
insert a blank line between the paragraphs, like:
$ git notes add -m foo -m bar
$ git notes show HEAD
foo
bar
The default behavour sometimes is not enough, the user may want
to use a custom delimiter between paragraphs, like when
specifying '-m', '-F', '-C', '-c' options. So this commit
introduce a new '--separator' option for 'git notes add' and
'git notes append', for example when executing:
$ git notes add -m foo -m bar --separator="-"
$ git notes show HEAD
foo
-
bar
a newline is added to the value given to --separator if it
does not end with one already. So when executing:
$ git notes add -m foo -m bar --separator="-"
and
$ export LF="
"
$ git notes add -m foo -m bar --separator="-$LF"
Both the two exections produce the same result.
The reason we use a "strbuf" array to concat but not "string_list", is
that the binary file content may contain '\0' in the middle, this will
cause the corrupt result if using a string to save.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct note_data d = { 0, 0, NULL, STRBUF_INIT };" style could be
replaced with designated initializer for clarity.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's cleanup the unnecessary 'strbuf_grow' call in 'append_edit'. This
"strbuf_grow(&d.buf, size + 1);" is prepared for insert a blank line if
needed, but actually when inserting, "strbuf_insertstr(&d.buf, 0,
"\n");" will do the "grow" for us.
348f199b (builtin-notes: Refactor handling of -F option to allow
combining -m and -F, 2010-02-13) added these to mimic the code
introduced by 2347fae5 (builtin-notes: Add "append" subcommand for
appending to note objects, 2010-02-13) that reads in previous note
before the message. And the resulting code with explicit sizing is
carried to this day.
In the context of reading an existing note in, exact sizing may have
made sense, but because the resulting note needs cleansing with
stripspace() when appending with this option, such an exact sizing
does not buy us all that much in practice.
It may help avoiding overallocation due to ALLOC_GROW() slop, but
nobody can feed so many long messages for it to matter from the
command line.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git [-c log.follow=true] log [--follow] ':(glob)f**'" used to barf.
* jk/log-follow-with-non-literal-pathspec:
diff: detect pathspec magic not supported by --follow
diff: factor out --follow pathspec check
pathspec: factor out magic-to-name function
The value of config.worktree is per-repository, but has been kept
in a singleton global variable per process. This has been OK as
most Git operations interacted with a single repository at a time,
but not right for operations like recursive "grep" that want to
access multiple repositories from a single process without forking.
The global variable has been eliminated and made into a member in
the per-repository data structure.
* vd/worktree-config-is-per-repository:
repository: move 'repository_format_worktree_config' to repo scope
config: pass 'repo' directly to 'config_with_options()'
config: use gitdir to get worktree config
"git submodule" code trusted the data coming from the config (and
the in-tree .gitmodules file) too much without validating, leading
to NULL dereference if the user mucks with a repository (e.g.
submodule.<name>.url is removed). This has been corrected.
* tb/submodule-null-deref-fix:
builtin/submodule--helper.c: handle missing submodule URLs
Code clean-up.
* ps/fetch-cleanups:
fetch: use `fetch_config` to store "submodule.fetchJobs" value
fetch: use `fetch_config` to store "fetch.parallel" value
fetch: use `fetch_config` to store "fetch.recurseSubmodules" value
fetch: use `fetch_config` to store "fetch.showForcedUpdates" value
fetch: use `fetch_config` to store "fetch.pruneTags" value
fetch: use `fetch_config` to store "fetch.prune" value
fetch: pass through `fetch_config` directly
fetch: drop unneeded NULL-check for `remote_ref`
fetch: drop unused DISPLAY_FORMAT_UNKNOWN enum value
Now that strbuf_expand_literal_cb() is no longer used as a callback,
drop its "_cb" name suffix and unused context parameter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid the overhead of passing context to a callback function of
strbuf_expand() by using strbuf_expand_step() in a loop instead. It
requires explicit handling of %% and unrecognized placeholders, but is
simpler, more direct and avoids void pointers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the part of strbuf_expand that finds the next placeholder into a
new function. It allows to build parsers without callback functions and
the overhead imposed by them.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 98e7ab6d42 (for-each-ref: delay parsing of --sort=<atom> options,
2021-10-20) a new string_list was introduced to accumulate any
"branch.sort" setting.
That string_list is cleared in ref_sorting_options(), which is only
called when processing the "--list" sub-command. Therefore, with other
sub-command, while having any sort option set, a leak is produced, e.g.:
$ git config branch.sort invalid_sort_option
$ git branch --edit-description
Direct leak of 384 byte(s) in 1 object(s) allocated from:
... in xrealloc wrapper.c
... in string_list_append_nodup string-list.c
... in string_list_append string-list.c
... in git_branch_config builtin/branch.c
... in configset_iter config.c
... in repo_config config.c
... in git_config config.c
... in cmd_branch builtin/branch.c
... in run_builtin git.c
Indirect leak of 20 byte(s) in 1 object(s) allocated from:
... in xstrdup wrapper.c
... in string_list_append string-list.c
... in git_branch_config builtin/branch.c
... in configset_iter config.c
... in repo_config config.c
... in git_config config.c
... in cmd_branch builtin/branch.c
... in run_builtin git.c
We don't have a common clean-up section in cmd_branch(). To avoid
refactoring, keep the fix simple, and while we find a better solution
which hopefuly will avoid entirely that string_list, when no sort
options are needed; let's squelch the leak sanitizer using UNLEAK().
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To handle "--abbrev-ref" we use shorten_unambiguous_ref(). This
function takes a refname and returns a shortened refname, which is a
newly allocated string that needs to be freed.
Unfortunately, the refname variable is reused to receive the shortened
one. Therefore, we lose the original refname, which needs to be freed
as well, producing a leak.
This leak can be reviewed with:
$ for a in {1..10}; do git branch foo_${a}; done
$ git rev-parse --abbrev-ref refs/heads/foo_{1..10}
Direct leak of 171 byte(s) in 10 object(s) allocated from:
... in xstrdup wrapper.c
... in expand_ref refs.c
... in repo_dwim_ref refs.c
... in show_rev builtin/rev-parse.c
... in cmd_rev_parse builtin/rev-parse.c
... in run_builtin git.c
We have this leak since a45d34691e (rev-parse: --abbrev-ref option to
shorten ref name, 2009-04-13) when "--abbrev-ref" was introduced.
Let's fix it.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-commit sees any "--trailer" options, it passes the
COMMIT_EDITMSG file through git-interpret-trailers. But it does so
without passing --no-divider, which means that interpret-trailers will
look for a "---" divider to signal the end of the commit message.
That behavior doesn't make any sense in this context; we know we have a
complete and solitary commit message, not something we have to further
parse. And as a result, we'll do the wrong thing if the commit message
contains a "---" marker (which otherwise is not syntactically
significant), inserting any new trailers at the wrong spot.
We can fix this by passing --no-divider. This is the exact situation for
which it was added in 1688c9a489 (interpret-trailers: allow suppressing
"---" divider, 2018-08-22). As noted in the message for that commit, it
just adds the mechanism, and further patches were needed to trigger it
from various callers. We did that back then in a few spots, like
ffce7f590f (sequencer: ignore "---" divider when parsing trailers,
2018-08-22), but obviously missed this one.
Reported-by: <eric.frederich@siemens.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`credential reject` sends the erase action to each helper, but the
exact behaviour of erase isn't specified in documentation or tests.
Some helpers (such as credential-store and credential-libsecret) delete
all matching credentials, others (such as credential-cache) delete at
most one matching credential.
Test that helpers erase all matching credentials. This behaviour is
easiest to reason about. Users expect that `echo
"url=https://example.com" | git credential reject` or `echo
"url=https://example.com\nusername=tim" | git credential reject` erase
all matching credentials.
Fix credential-cache.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that credential helpers do not erase a password distinct from the
input. Such calls can happen when multiple credential helpers are
configured.
Fixes for credential-cache and credential-store.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some atoms that can be used in "--format=<format>" for "git ls-tree"
were not supported by "git ls-files", even though they were relevant
in the context of the latter.
* zh/ls-files-format-atoms:
ls-files: align format atoms with ls-tree
"git pack-refs" learns "--include" and "--exclude" to tweak the ref
hierarchy to be packed using pattern matching.
* jc/pack-ref-exclude-include:
pack-refs: teach pack-refs --include option
pack-refs: teach --exclude option to exclude refs from being packed
docs: clarify git-pack-refs --all will pack all refs
"git tag" learned to leave the "$GIT_DIR/TAG_EDITMSG" file when the
command failed, so that the user can salvage what they typed.
* kh/keep-tag-editmsg-upon-failure:
tag: keep the message file in case ref transaction fails
t/t7004-tag: add regression test for successful tag creation
doc: tag: document `TAG_EDITMSG`
To partition the set of packs based on which ones are "kept" (either
they have a .keep file, or were otherwise marked via the `--keep-pack`
option) and "non-kept" ones (anything else), `git repack` uses its
`collect_pack_filenames()` function.
Ordinarily, we would rely on a convenience function such as
`get_all_packs()` to enumerate and partition the set of packs. But
`collect_pack_filenames()` uses `readdir()` directly to read the
contents of the "$GIT_DIR/objects/pack" directory, and adds each entry
ending in ".pack" to the appropriate list (either kept, or non-kept as
above).
This is subtly racy, since `collect_pack_filenames()` may see a pack
that is not fully staged (i.e., it is missing its ".idx" file).
Ordinarily, this doesn't cause a problem. But it can cause issues when
generating a cruft pack.
This is because `git repack` feeds (among other things) the list of
existing kept packs down to `git pack-objects --cruft` to indicate that
any kept packs will not be removed from the repository (so that the
cruft pack machinery can avoid packing objects that appear in those
packs as cruft).
But `read_cruft_objects()` lists packfiles by calling `get_all_packs()`.
So if a ".pack" file exists (necessary to get that pack to appear to
`collect_pack_filenames()`), but doesn't have a corresponding ".idx"
file (necessary to get that pack to appear via `get_all_packs()`), we'll
complain with:
fatal: could not find pack '.tmp-5841-pack-a6b0150558609c323c496ced21de6f4b66589260.pack'
Fix the above by teaching `collect_pack_filenames()` to only collect
packs with their corresponding `*.idx` files in place, indicating that
those packs have been fully staged.
There are a couple of things worth noting:
- Since each entry in the `extra_keep` list (which contains the
`--keep-pack` names) has a `*.pack` suffix, we'll have to swap the
suffix from ".pack" to ".idx", and compare that instead.
- Since we use the the `fname_kept_list` to figure out which packs to
delete (with `git repack -d`), we would have previously deleted a
`*.pack` with no index (since the existince of a ".pack" file is
necessary and sufficient to include that pack in the list of
existing non-kept packs).
Now we will leave it alone (since that pack won't appear in the
list). This is far more correct behavior, since we don't want
to race with a pack being staged. Deleting a partially staged pack
is unlikely, however, since the window of time between staging a
pack and moving its .idx file into place is miniscule.
Note that this window does *not* include the time it takes to
receive and index the pack, since the incoming data goes into
"$GIT_DIR/objects/tmp_pack_XXXXXX", which does not end in ".pack"
and is thus ignored by collect_pack_filenames().
In the future, this function should probably be rewritten as a callback
to `for_each_file_in_pack_dir()`, but this is the simplest change we
could do in the short-term.
Reported-by: Michael Haggerty <mhagger@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a library that only interacts with other primitives, strbuf should
not utilize the comment_line_char global variable within its
functions. Therefore, add an additional parameter for functions that use
comment_line_char and refactor callers to pass it in instead.
strbuf_stripspace() removes the skip_comments boolean and checks if
comment_line_char is a non-NUL character to determine whether to skip
comments or not.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
is_rfc3986_unreserved() and is_rfc3986_reserved_or_unreserved() are only
called from builtin/credential-store.c and they are only relevant to that
file so move those functions and make them static.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several builtins depend on being able to disable the replace references
so we actually operate on each object individually. These currently do
so by directly mutating the 'read_replace_refs' global.
A future change will move this global into a different place, so it will
be necessary to change all of these lines. However, we can simplify that
transition by abstracting the purpose of these global assignments with a
method call.
We will need to keep this read_replace_refs global forever, as we want
to make sure that we never use replace refs throughout the life of the
process if this method is called. Future changes may present a
repository-scoped version of the variable to represent that repository's
core.useReplaceRefs config value, but a zero-valued read_replace_refs
will always override such a setting.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In db9d67f2e9 (builtin/cat-file.c: support NUL-delimited input with
`-z`, 2022-07-22), we have introduced a new mode to read the input via
NUL-delimited records instead of newline-delimited records. This allows
the user to query for revisions that have newlines in their path
component. While unusual, such queries are perfectly valid and thus it
is clear that we should be able to support them properly.
Unfortunately, the commit only changed the input to be NUL-delimited,
but didn't change the output at the same time. While this is fine for
queries that are processed successfully, it is less so for queries that
aren't. In the case of missing commits for example the result can become
entirely unparsable:
```
$ printf "7ce4f05bae8120d9fa258e854a8669f6ea9cb7b1 blob 10\n1234567890\n\n\commit000" |
git cat-file --batch -z
7ce4f05bae blob 10
1234567890
commit missing
```
This is of course a crafted query that is intentionally gaming the
deficiency, but more benign queries that contain newlines would have
similar problems.
Ideally, we should have also changed the output to be NUL-delimited when
`-z` is specified to avoid this problem. As the input is NUL-delimited,
it is clear that the output in this case cannot ever contain NUL
characters by itself. Furthermore, Git does not allow NUL characters in
revisions anyway, further stressing the point that using NUL-delimited
output is safe. The only exception is of course the object data itself,
but as git-cat-file(1) prints the size of the object data clients should
read until that specified size has been consumed.
But even though `-z` has only been introduced a few releases ago in Git
v2.38.0, changing the output format retroactively to also NUL-delimit
output would be a backwards incompatible change. And while one could
make the argument that the output is inherently broken already, we need
to assume that there are existing users out there that use it just fine
given that revisions containing newlines are quite exotic.
Instead, introduce a new option `-Z` that switches to NUL-delimited
input and output. While this new option could arguably only switch the
output format to be NUL-delimited, the consequence would be that users
have to always specify both `-z` and `-Z` when the input may contain
newlines. On the other hand, if the user knows that there never will be
newlines in the input, they don't have to use either of those options.
There is thus no usecase that would warrant treating input and output
format separately, which is why we instead opt to "do the right thing"
and have `-Z` mean to NUL-terminate both formats.
The old `-z` option is marked as deprecated with a hint that its output
may become unparsable. It is thus hidden both from the synopsis as well
as the command's help output.
Co-authored-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The batch modes of git-cat-file(1) read queries from stantard input that
are either newline- or NUL-delimited. This code was introduced via
db9d67f2e9 (builtin/cat-file.c: support NUL-delimited input with `-z`,
2022-07-22), which notes that:
"""
The refactoring here is slightly unfortunate, since we turn loops like:
while (strbuf_getline(&buf, stdin) != EOF)
into:
while (1) {
int ret;
if (opt->nul_terminated)
ret = strbuf_getline_nul(&input, stdin);
else
ret = strbuf_getline(&input, stdin);
if (ret == EOF)
break;
}
"""
The commit proposed introducing a helper function that is easier to use,
which is just what we have done in the preceding commit. Refactor the
code to use this new helper to simplify the loop.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index is read in 'worktree.c' at two points:
1.The 'validate_no_submodules' function, which checks if there are any
submodules present in the worktree.
2.The 'check_clean_worktree' function, which verifies if a worktree is
'clean', i.e., there are no untracked or modified but uncommitted files.
This is done by running the 'git status' command, and an error message
is thrown if the worktree is not clean. Given that 'git status' is
already sparse-aware, the function is also sparse-aware.
Hence we can just set the requires-full-index to false for
"git worktree".
Add tests that verify that 'git worktree' behaves correctly when the
sparse index is enabled and test to ensure the index is not expanded.
The `p2000` tests demonstrate a ~20% execution time reduction for
'git worktree' using a sparse index:
(Note:the p2000 test results didn't reflect the huge speedup because of
the index reading time is minuscule comparing to the filesystem
operations.)
Test before after
-----------------------------------------------------------------------
2000.102: git worktree add....(full-v3) 3.15 2.82 -10.5%
2000.103: git worktree add....(full-v4) 3.14 2.84 -9.6%
2000.104: git worktree add....(sparse-v3) 2.59 2.14 -16.4%
2000.105: git worktree add....(sparse-v4) 2.10 1.57 -25.2%
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git add -i' and 'git add -p' were converted to a builtin, they
introduced a color bug: the 'color.ui' config setting is ignored.
The included test demonstrates an example that is similar to the
previous test, which focuses on customizing colors. Here, we are
demonstrating that colors are not being used at all by comparing the raw
output and the color-decoded version of that output.
The fix is simple, to use git_color_default_config() as the fallback for
git_add_config(). A more robust change would instead encapsulate the
git_use_color_default global in methods that would check the config
setting if it has not been initialized yet. Some ideas are being
discussed on this front [1], but nothing has been finalized.
[1] https://lore.kernel.org/git/pull.1539.git.1685716420.gitgitgadget@gmail.com/
This test case naturally bisects down to 0527ccb1b5 (add -i: default to
the built-in implementation, 2021-11-30), but the fix makes it clear
that this would be broken even if we added the config to use the builtin
earlier than this.
Reported-by: Greg Alexander <gitgreg@galexander.org>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In --follow mode, we require exactly one pathspec. We check this
condition in two places:
- in diff_setup_done(), we complain if --follow is used with an
inapropriate pathspec
- in git-log's revision "tweak" function, we enable log.follow only if
the pathspec allows it
The duplication isn't a big deal right now, since the logic is so
simple. But in preparation for it becoming more complex, let's pull it
into a shared function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>