The git-diff command has many modes (comparing worktree to index, index
to HEAD, individual blobs, etc). As a result, it dispatches to many
helper functions and cannot completely parse its options until we're in
those helper functions.
Most of them, when seeing an unknown option, exit immediately by calling
usage(). But builtin_diff_files(), which is the default if no revision
or blob arguments are given, instead prints an error() and returns -1.
One obvious shortcoming here is that the user doesn't get to see the
usual usage message. But there's a much more important bug: the -1
return is fed to diff_result_code(), which is not ready to handle it.
By default, it passes the code along as an exit code. We try to avoid
negative exit codes because they get converted to unsigned values, but
it should at least consistently show up as non-zero (i.e., a failure).
But much worse is that when --exit-code is in effect, diff_result_code()
will _ignore_ the status passed in by the caller, and instead only
report on whether the diff found changes. It didn't, of course, because
we never ran the diff, and the program unexpectedly exits with success!
We can fix this bug by just calling usage(), like the other helpers do.
Another option would of course be to teach diff_result_code() to handle
this value. But as we'll see in the next few patches, it can be cleaned
up even further. Let's just fix this bug directly to start with.
Reported-by: Romain Chossart <romainchossart@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If loading the index fails, we print an error and then return "-1" from
the function. But since this is a builtin, we end up with exit(-1),
which produces odd results since program exit codes are unsigned.
Because of integer conversion, it usually becomes 255, which is at least
still an error, but values above 128 are usually interpreted as signal
death.
Since we know the program is exiting immediately, we can just replace
the error return with a die().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers of run_diff_index() passed literal "1" for the option
flag word, which should better be spelled out as DIFF_INDEX_CACHED
for readablity. Everybody else passes "0" that can stay as-is.
The other bit in the option flag word is DIFF_INDEX_MERGE_BASE, but
curiously there is only one caller that can pass it, which is "git
diff-index --merge-base" itself---no internal callers uses the
feature.
A bit tricky call to the function is in builtin/submodule--helper.c
where the .cached member in a private struct is set/reset as a plain
Boolean flag, which happens to be "1" and happens to match the value
of DIFF_INDEX_CACHED.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We switched the function interface for fsck callbacks in a1aad71601
(fsck.h: use "enum object_type" instead of "int", 2021-03-28). However,
we accidentally flipped the type back to "int" as part of 0b4e9013f1
(fsck: mark unused parameters in various fsck callbacks, 2023-07-03).
The mistake happened because that commit was written before a1aad71601
and rebased forward, and I screwed up while resolving the conflict.
Curiously, the compiler does not warn about this mismatch, at least not
when using gcc and clang on Linux (nor in any of our CI environments).
Based on 28abf260a5 (builtin/fsck.c: don't conflate "int" and "enum" in
callback, 2021-06-01), I'd guess that this would cause the AIX xlc
compiler to complain. I noticed because clang-18's UBSan now identifies
mis-matched function calls at runtime, and does complain of this case
when running the test suite.
I'm not entirely clear on whether this mismatch is a problem in
practice. Compilers are certainly free to make enums smaller than "int"
if they don't need the bits, but I suspect that they have to promote
back to int for function calls (though I didn't dig in the standard, and
I won't be surprised if I'm simply wrong and the real-world impact would
depend on the ABI).
Regardless, switching it back to enum is obviously the right thing to do
here; the switch to "int" was simply a mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows updates.
* ds/maintenance-on-windows-fix:
git maintenance: avoid console window in scheduled tasks on Windows
win32: add a helper to run `git.exe` without a foreground window
We just introduced a helper to avoid showing a console window when the
scheduled task runs `git.exe`. Let's actually use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a directory onto another with `git mv` various checks are
performed. One of of these validates that the destination is not existing.
When calling `lstat` on the destination path and it fails as the path
doesn't exist, some environments seem to overwrite the passed in
`stat` memory nonetheless (I observed this issue on debian 12 of x86_64,
running on OrbStack on ARM, emulated with Rosetta).
This would affect the code that followed as it would still acccess a now
modified `st` structure, which now seems to contain uninitialized memory.
`S_ISDIR(st_dir_mode)` would then typically return false causing the code
to run into a bad case.
The fix avoids overwriting the existing `st` structure, providing an
alternative that exists only for that purpose.
Note that this patch minimizes complexity instead of stack-frame size.
Signed-off-by: Sebastian Thiel <sebastian.thiel@icloud.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the program is ending, we call clear_pack_geometry() to free any
resources in the pack_geometry struct. But the struct itself is
allocated on the heap, and leak-checkers will complain about the
resulting small leak.
This one was marked by Coverity as a "new" leak, though it has existed
since 0fabafd0b9 (builtin/repack.c: add '--geometric' option,
2021-02-22). This might be because recent unrelated changes in the file
confused it about what is new and what is not. But regardless, it is
worth addressing.
We can fix it easily by free-ing the struct. We'll convert our "clear"
function to "free", since the allocation happens in the matching init()
function (though since there is only one call to each, and the struct is
local to this file, it's mostly academic).
Another option would be to put the struct on the stack rather than the
heap. However, this gets tricky, as we check the pointer against NULL in
several places to decide whether we're in geometric mode.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line parser fix, and a small parse-options API update.
* jc/parse-options-short-help:
short help: allow a gap smaller than USAGE_GAP
remote: simplify "remote add --tags" help text
short help: allow multi-line opthelp
Fix tests with unportable regex patterns.
* ja/worktree-orphan-fix:
t2400: rewrite regex to avoid unintentional PCRE
builtin/worktree.c: convert tab in advice to space
t2400: drop no-op `--sq` from rev-parse call
Code simplification.
* jc/tree-walk-drop-base-offset:
tree-walk: drop unused base_offset from do_match()
tree-walk: lose base_offset that is never used in tree_entry_interesting
"git bundle" passes the progress control options to "git pack-objects"
by parsing and then recreating them explicitly. Simplify that process
by using OPT_PASSTHRU_ARGV instead.
This also fixes --no-quiet, which has been doing the same as --quiet
since its introduction by 79862b6b77 (bundle-create: progress output
control, 2019-11-10) because it had been defined using OPT_SET_INT with
a value of 0, which sets 0 when negated as well.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line parser fixes.
* jc/parse-options-show-branch:
show-branch: reject --[no-](topo|date)-order
show-branch: --no-sparse should give dense output
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
Help newbies by suggesting that there are cases where force-pushing
is a valid and sensible thing to update a branch at a remote
repository, rather than reconciling with merge/rebase.
* ah/advise-force-pushing:
push: don't imply that integration is always required before pushing
remote: don't imply that integration is always required before pushing
wt-status: don't show divergence advice when committing
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
Since 99fb6e04cb (pack-objects: convert to use parse_options(),
2012-02-01) git pack-objects has accepted the option --no-quiet, but it
does the same as --quiet. That's because it's defined using OPT_SET_INT
with a value of 0, which sets 0 when negated, too.
Make --no-quiet equivalent to --progress and ignore it if --all-progress
was given.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 99fb6e04cb (pack-objects: convert to use parse_options(),
2012-02-01) git pack-objects has accepted --no-keep-true-parents, but
this option does the same as --keep-true-parents. That's because it's
defined using OPT_SET_INT with a value of 0, which sets 0 when negated
as well.
Turn --no-keep-true-parents into the opposite of --keep-true-parents by
using OPT_BOOL and storing the option's status directly in a variable
named "grafts_keep_true_parents" instead of in negative form in
"grafts_replace_parents".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2c33f75754 (Teach git-describe --exact-match to avoid expensive
tag searches, 2008-02-24) git describe accepts --no-exact-match, but it
does the same as --exact-match, an alias for --candidates=0. That's
because it's defined using OPT_SET_INT with a value of 0, which sets 0
when negated as well.
Let --no-exact-match set the number of candidates to the default value
instead. Users that need a more specific lack of exactitude can specify
their preferred value using --candidates, as before.
The "--no-exact-match" option was not covered in the tests, so let's
add a few. Also add a case where --exact-match option is used on a
commit that cannot be described without distance from tags and make
sure the command fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
[jc: added trivial tests]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset --no-mixed" behaved exactly like "git reset --mixed",
which was nonsense.
If there were only two kinds, e.g. "mixed" vs "separate", it might
have made sense to make "git reset --no-mixed" behave identically to
"git reset --separate" and vice-versa, but because we have many
types of reset, let's just forbid "--no-mixed" and negated form of
other types.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --no-topo-order" behaved exactly the same way as
"git show-branch --topo-order" did, which was nonsense. This was
because we choose between topo- and date- by setting a variable to
either REV_SORT_IN_GRAPH_ORDER or REV_SORT_BY_COMMIT_DATE with
OPT_SET_INT() and REV_SORT_IN_GRAPH_ORDER happens to be 0. The
OPT_SET_INT() macro assigns 0 to the target variable in respose to
the negated form of its option.
"--no-date-order" by luck behaves identically to "--topo-order"
exactly for the same reason, and it sort-of makes sense right now,
but the "sort-of makes sense" will quickly break down once we add a
third way to sort. Not-A may be B when there are only two choices
between A and B, but once your choices become among A, B, and C,
not-A does not mean B.
Just mark these two ordering options to reject negation, and add a
test, which was missing. "git show-branch --no-reflog" is also
unnegatable, so throw in a test for that while we are at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The help text for the --tags option was split into two option[]
entries, which was a hacky way to give two lines of help text (the
second entry did not have either short or long help, and there was
no way to invoke its entry---it was there only for the help text).
As we now support multi-line text in the option help, let's make
the second line of the help a proper second line and remove the
hacky second entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --no-sparse" behaved exactly the same way as "git
show-branch --sparse", which did not make any sense. This was
because it used a variable "dense" initialized to 1 by default to
give "non sparse" behaviour, and OPT_SET_INT() to set the varilable
to 0 in response to the "--sparse" option. Unfortunately,
OPT_SET_INT() sets 0 to the given variable when the option is
negated.
Flip the polarity of the variable "dense" by renaming it to "sparse"
and initializing it to 0, and have OPT_SET_INT() set the variable to
1 when "--sparse" is given. This way, "--no-sparse" would set 0 to
the variable and would give us the "dense" behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parsing for "git clone", "git fetch", and
"git push" have duplicated implementations of parsing "--ipv4" and
"--ipv6" options, by having two OPT_SET_INT() for "ipv4" and "ipv6".
Introduce a new OPT_IPVERSION() macro and use it in these three
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the command line parser for "git branch --all" forgets to use
PARSE_OPT_NONEG, it accepted "git branch --no-all", and then passed
a nonsense value to the underlying machinery, leading to a fatal
error "filter_refs: invalid type". The "--remotes" option had
exactly the same issue.
Catch the unsupported options early in the option parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options "--keep-cr" and its negation trigger
OPT_SET_INT_F(PARSE_OPT_NONEG) to set a variable to 1 and 0
respectively. Using OPT_SET_INT() to implement the positive variant
that sets the variable to 1 without specifying PARSE_OPT_NONEG gives
us the negative variant to set it to 0 for free.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 61fdbcf98b (ls-tree: migrate to parse-options, 2009-11-13) git
ls-tree has accepted the option --no-full-name, but it does the same
as --full-name, contrary to convention. That's because it's defined
using OPT_SET_INT with a value of 0, where the negative variant sets
0 as well.
Turn --no-full-name into the opposite of --full-name by using OPT_BOOL
instead and storing the option's status directly in a variable named
"full_name" instead of in negated form in "chomp_prefix".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent change to "git repack" made it react less nicely when a
leftover .idx file that no longer has the corresponding .pack file
in the repository, which has been corrected.
* tb/repack-cleanup:
builtin/repack.c: avoid dir traversal in `collect_pack_filenames()`
builtin/repack.c: only repack `.pack`s that exist
"git fsck --no-progress" still spewed noise from the commit-graph
subsystem, which has been corrected.
* tb/fsck-no-progress:
commit-graph.c: avoid duplicated progress output during `verify`
commit-graph.c: pass progress to `verify_one_commit_graph()`
commit-graph.c: iteratively verify commit-graph chains
commit-graph.c: extract `verify_one_commit_graph()`
fsck: suppress MIDX output with `--no-progress`
fsck: suppress commit-graph output with `--no-progress`
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
We iterate over the set of input tag names using callbacks. But not all
operations need the same inputs, so some parameters go unused (but of
course not the same ones for each operation). Mark the unused ones to
avoid -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to use the "data" parameter in this instance. Let's mark
it to avoid -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't look at the "commit" parameter to our callback, as our
"mergetag_data" pointer contains the original name "ref", which we use
instead. But we can't get rid of it, since other for_each_mergetag
callbacks do use it. Let's mark the parameter to avoid
-Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't look at the "flags" parameter, which is natural for something
that is just printing the contents of the replace refs. But let's mark
it to appease -Wunused-parameter.
This probably should have been part of 63e14ee2d6 (refs: mark unused
each_ref_fn parameters, 2022-08-19), but I missed it as this one is a
repo_each_ref_fn, which takes an extra repository argument.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our threeway_callback() does not bother to look at its "n" parameter. It
is static in this file and used only by trivial_merge_trees(), which
always passes 3 trees (hence the name "threeway"). It also does not look
at "dirmask". This is OK, as it handles directories specifically by
looking at the mode bits.
Other traverse_info callbacks need these, so we can't get drop them from
the interface. But let's annotate these ones to avoid complaints from
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few callback functions which are used with the fsck code,
but it's natural that not all callbacks need all parameters. For
reporting, even something as obvious as "the oid of the object which had
a problem" is not always used, as some callers are only checking a
single object in the first place. And for both reporting and walking,
things like void data pointers and the fsck_options aren't always
necessary.
But since each such parameter is used by _some_ callback, we have to
keep them in the interface. Mark the unused ones in specific callbacks
to avoid triggering -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup_revision_opt struct has a "tweak" function pointer, which can
be used to adjust parameters after setup_revisions() parses arguments,
but before it finalizes setup. In addition to the rev_info struct, the
callback receives a pointer to the setup_revision_opt, as well.
But none of the existing callbacks looks at the extra "opt" parameter,
leading to -Wunused-parameter warnings.
We could mark it as UNUSED, but instead let's remove it entirely. It's
conceivable that it could be useful for a callback to have access to the
"opt" struct. But in the 13 years that this mechanism has existed,
nobody has used it. So let's just drop it in the name of simplifying.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callbacks to for_each_altodb() get a void data pointer, but we don't
need it here. Mark it as unused to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the input, we have a "keep_cr" parameter to tell us how to
handle line endings. But this doesn't apply to stgit or hg patches
(which are not mailbox formats where we have to worry about that), so we
ignore the parameter entirely in those functions.
Let's mark these as unused so that -Wunused-parameter does not complain
about them.
Note that we could just drop these parameters entirely. They are
necessary to conform to the mail_conv_fn interface used by
split_mail_conv(), but these two callbacks are the only ones used with
that function. The other formats (which _do_ care about keep_cr) use
split_mail_mbox(). But it's conceivable that we'd eventually add another
format that does care about this option, so let's leave it as part of
the generic interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
