Amit Klein reported that udp6_ehash_secret was initialized but never used.
Fixes: 1bbdceef1e ("inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tracepoint has existed for 12 years, but it only covered udp
over the legacy IPv4 protocol. Having it enabled for udp6 removes
the unnecessary difference in error visibility.
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Fixes: 296f7ea75b ("udp: add tracepoints for queueing skb to rcvbuf")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_destopt_rcv() and ipv6_parse_hopopts() pulls these data
- Hop-by-Hop/Destination Options Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
and calls ip6_parse_tlv(), so it need not check if skb_headlen() is less
than skb_transport_offset(skb) + (skb_transport_header(skb)[1] << 3).
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need not reload hdr in ipv6_srh_rcv() unless we call
pskb_expand_head().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_rthdr_rcv() pulls these data
- Segment Routing Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
needed by ipv6_srh_rcv(), so pskb_pull() in ipv6_srh_rcv() never
fails and can be replaced with skb_pull().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_rpl_srh_rcv() checks if ipv6_hdr(skb)->daddr or ohdr->rpl_segaddr[i]
is the multicast address with ipv6_addr_type().
We have the same check for ipv6_hdr(skb)->daddr in ipv6_rthdr_rcv(), so we
need not recheck it in ipv6_rpl_srh_rcv().
Also, we should use ipv6_addr_is_multicast() for ohdr->rpl_segaddr[i]
instead of ipv6_addr_type().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Eric Dumazet pointed out [0], ipv6_rthdr_rcv() pulls these data
- Segment Routing Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
needed by ipv6_rpl_srh_rcv(). We can remove pskb_may_pull() and
replace pskb_pull() with skb_pull() in ipv6_rpl_srh_rcv().
Link: https://lore.kernel.org/netdev/CANn89iLboLwLrHXeHJucAqBkEL_S0rJFog68t7wwwXO-aNf5Mg@mail.gmail.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Splicing to SOCK_RAW sockets may set MSG_SPLICE_PAGES, but in such a case,
__ip_append_data() will call skb_splice_from_iter() to access the 'from'
data, assuming it to point to a msghdr struct with an iter, instead of
using the provided getfrag function to access it.
In the case of raw_sendmsg(), however, this is not the case and 'from' will
point to a raw_frag_vec struct and raw_getfrag() will be the frag-getting
function. A similar issue may occur with rawv6_sendmsg().
Fix this by ignoring MSG_SPLICE_PAGES if getfrag != ip_generic_getfrag as
ip_generic_getfrag() expects "from" to be a msghdr*, but the other getfrags
don't. Note that this will prevent MSG_SPLICE_PAGES from being effective
for udplite.
This likely affects ping sockets too. udplite looks like it should be okay
as it expects "from" to be a msghdr.
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: syzbot+d8486855ef44506fd675@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000ae4cbf05fdeb8349@google.com/
Fixes: 2dc334f1a6 ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()")
Tested-by: syzbot+d8486855ef44506fd675@syzkaller.appspotmail.com
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1410156.1686729856@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.
esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.
It is not affected with INET_ESP_OFFLOAD disabled.
Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs
when a UDP-Lite socket tries to allocate a buffer under memory pressure.
Someone should have stumbled on the bug much earlier if UDP-Lite had been
used in a real app. Also, we do not always need a large UDP-Lite workload
to hit the bug since UDP and UDP-Lite share the same memory accounting
limit.
Removing UDP-Lite would simplify UDP code removing a bunch of conditionals
in fast path.
Let's add a deprecation notice when UDP-Lite socket is created and schedule
its removal to 2025.
Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New users of dev_get_by_index() and dev_get_by_name() keep
getting added and it would be nice to steer them towards
the APIs with reference tracking.
Add variants of those calls which allocate the reference
tracker and use them in a couple of places.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before Linux v5.8 an AF_INET6 SOCK_DGRAM (udp/udplite) socket
with SOL_UDP, UDP_ENCAP, UDP_ENCAP_ESPINUDP{,_NON_IKE} enabled
would just unconditionally use xfrm4_udp_encap_rcv(), afterwards
such a socket would use the newly added xfrm6_udp_encap_rcv()
which only handles IPv6 packets.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benedict Wong <benedictwong@google.com>
Cc: Yan Yan <evitayan@google.com>
Fixes: 0146dca70b ("xfrm: add support for UDPv6 encapsulation of ESP")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Allow splice to undo the effects of MSG_MORE after prematurely ending a
splice/sendfile due to getting an EOF condition (->splice_read() returned
0) after splice had called sendmsg() with MSG_MORE set when the user didn't
set MSG_MORE.
For UDP, a pending packet will not be emitted if the socket is closed
before it is flushed; with this change, it be flushed by ->splice_eof().
For TCP, it's not clear that MSG_MORE is actually effective.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.
For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
$ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1
What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.
Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.
This fixes the following kselftest failure:
$ ./fcnal-test.sh -t ipv6_ping
[...]
TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL]
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 5e45789698 ("net: ipv6: Fix ping to link-local addresses.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.
The Source Routing Header (SRH) has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
. .
. Addresses[1..n] .
. .
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The originator of an SRH places the first hop's IPv6 address in the IPv6
header's IPv6 Destination Address and the second hop's IPv6 address as
the first address in Addresses[1..n].
The CmprI and CmprE fields indicate the number of prefix octets that are
shared with the IPv6 Destination Address. When CmprI or CmprE is not 0,
Addresses[1..n] are compressed as follows:
1..n-1 : (16 - CmprI) bytes
n : (16 - CmprE) bytes
Segments Left indicates the number of route segments remaining. When the
value is not zero, the SRH is forwarded to the next hop. Its address
is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6
Destination Address.
When Segment Left is greater than or equal to 2, the size of SRH is not
changed because Addresses[1..n-1] are decompressed and recompressed with
CmprI.
OTOH, when Segment Left changes from 1 to 0, the new SRH could have a
different size because Addresses[1..n-1] are decompressed with CmprI and
recompressed with CmprE.
Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment
Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has
16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to
16 bytes and not recompressed. Finally, the new SRH will need more room
in the header, and the size is (16 - 1) * (n - 1) bytes.
Here the max value of n is 255 as Segment Left is u8, so in the worst case,
we have to allocate 3825 bytes in the skb headroom. However, now we only
allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7
bytes). If the decompressed size overflows the room, skb_push() hits BUG()
below [0].
Instead of allocating the fixed buffer for every packet, let's allocate
enough headroom only when we receive SRH with Segment Left 1.
[0]:
skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo
kernel BUG at net/core/skbuff.c:200!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_panic (net/core/skbuff.c:200)
Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90000003da0 EFLAGS: 00000246
RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540
RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff
R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800
R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190
FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
skb_push (net/core/skbuff.c:210)
ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5494)
process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934)
__napi_poll (net/core/dev.c:6496)
net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
do_softirq (kernel/softirq.c:472 kernel/softirq.c:459)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:396)
__dev_queue_xmit (net/core/dev.c:4272)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:724 net/socket.c:747)
__sys_sendto (net/socket.c:2144)
__x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f453a138aea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea
RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003
RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b
</TASK>
Modules linked in:
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Reported-by: Max VA
Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This following message is printed in the console each time a network
device configured with an IPv6 addresses is ready to be used:
ADDRCONF(NETDEV_CHANGE): <iface>: link becomes ready
When netns are being extensively used -- e.g. by re-creating netns' with
veth to discuss with each others for testing purposes like mptcp_join.sh
selftest does -- it generates a lot of messages like that: more than 700
when executing mptcp_join.sh with the latest version.
It looks like this message is not that helpful after all: maybe it can
be used as a sign to know if there is something wrong, e.g. if a device
is being regularly reconfigured by accident? But even then, there are
better ways to monitor and diagnose such issues.
When looking at commit 3c21edbd11 ("[IPV6]: Defer IPv6 device
initialization until the link becomes ready.") which introduces this new
message, it seems it had been added to verify that the new feature was
working as expected. It could have then used a lower level than "info"
from the beginning but it was fine like that back then: 17 years ago.
It seems then OK today to simply lower its level, similar to commit
7c62b8dd5c ("net/ipv6: lower the level of "link is not ready" messages")
and as suggested by Mat [1], Stephen and David [2].
Link: https://lore.kernel.org/mptcp/614e76ac-184e-c553-af72-084f792e60b0@kernel.org/T/ [1]
Link: https://lore.kernel.org/netdev/68035bad-b53e-91cb-0e4a-007f27d62b05@tessares.net/T/ [2]
Suggested-by: Mat Martineau <martineau@kernel.org>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save a bit a space, and could help future sysctls to
use the same pattern.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_gro_complete() function only updates the skb fields related to GRO
and it always returns zero. All the 3 drivers which are using it
do not check for the return value either.
Change it to return void instead which simplifies its callers as
error handing becomes unnecessary.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: c61a404325 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make IP6/UDP6 sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator if possible, copying the data if not.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.
For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.
For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Don't keep hand coded offset caluclations and replace it with
container_of(). It should be type safer and a bit less confusing.
It also makes it with a macro instead of inline function to preserve
constness, which was previously casted out like in case of
tcp_v6_send_synack().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98ca ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In processing IPv6 segment routing header (SRH), several functions call
skb_dst_drop before ip6_route_input. However, ip6_route_input calls
skb_dst_drop within it, so there is no need to call skb_dst_drop in advance.
Signed-off-by: Yuya Tajima <yuya.tajimaa@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As low_thresh has no work in fragment reassembles,del it.
And Mark it deprecated in sysctl Document.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 20704bd163 ("erspan: build the header with the right proto
according to erspan_ver"), it gets the proto with t->parms.erspan_ver,
but t->parms.erspan_ver is not used by collect_md branch, and instead
it should get the proto with md->version for collect_md.
Thanks to Kevin for pointing this out.
Fixes: 20704bd163 ("erspan: build the header with the right proto according to erspan_ver")
Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Reported-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb hash comes from sk->sk_txhash when using TCP, except for some
IPv6 RST packets. This is because in tcp_v6_send_reset when not in
TIME_WAIT the hash is taken from sk->sk_hash, while it should come from
sk->sk_txhash as those two hashes are not computed the same way.
Packetdrill script to test the above,
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > (flowlabel 0x1) S 0:0(0) <...>
// Wrong ack seq, trigger a rst.
+0 < S. 0:0(0) ack 0 win 4000
// Check the flowlabel matches prior one from SYN.
+0 > (flowlabel 0x1) R 0:0(0) <...>
Fixes: 9258b8b1be ("ipv6: tcp: send consistent autoflowlabel in RST packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a24 ("gue: TX support for using remote checksum offload option").
Fixes: 32b8a8e59c ("sit: add IPv4 over IPv4 support")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xfrm_alloc_dst() followed by xfrm4_dst_destroy(), without a
xfrm4_fill_dst() call in between, causes the following BUG:
BUG: spinlock bad magic on CPU#0, fbxhostapd/732
lock: 0x890b7668, .magic: 890b7668, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 732 Comm: fbxhostapd Not tainted 6.3.0-rc6-next-20230414-00613-ge8de66369925-dirty #9
Hardware name: Marvell Kirkwood (Flattened Device Tree)
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x28/0x30
dump_stack_lvl from do_raw_spin_lock+0x20/0x80
do_raw_spin_lock from rt_del_uncached_list+0x30/0x64
rt_del_uncached_list from xfrm4_dst_destroy+0x3c/0xbc
xfrm4_dst_destroy from dst_destroy+0x5c/0xb0
dst_destroy from rcu_process_callbacks+0xc4/0xec
rcu_process_callbacks from __do_softirq+0xb4/0x22c
__do_softirq from call_with_stack+0x1c/0x24
call_with_stack from do_softirq+0x60/0x6c
do_softirq from __local_bh_enable_ip+0xa0/0xcc
Patch "net: dst: Prevent false sharing vs. dst_entry:: __refcnt" moved
rt_uncached and rt_uncached_list fields from rtable struct to dst
struct, so they are more zeroed by memset_after(xdst, 0, u.dst) in
xfrm_alloc_dst().
Note that rt_uncached (list_head) was never properly initialized at
alloc time, but xfrm[46]_dst_destroy() is written in such a way that
it was not an issue thanks to the memset:
if (xdst->u.rt.dst.rt_uncached_list)
rt_del_uncached_list(&xdst->u.rt);
The route code does it the other way around: rt_uncached_list is
assumed to be valid IIF rt_uncached list_head is not empty:
void rt_del_uncached_list(struct rtable *rt)
{
if (!list_empty(&rt->dst.rt_uncached)) {
struct uncached_list *ul = rt->dst.rt_uncached_list;
spin_lock_bh(&ul->lock);
list_del_init(&rt->dst.rt_uncached);
spin_unlock_bh(&ul->lock);
}
}
This patch adds mandatory rt_uncached list_head initialization in
generic dst_init(), and adapt xfrm[46]_dst_destroy logic to match the
rest of the code.
Fixes: d288a162dd ("net: dst: Prevent false sharing vs. dst_entry:: __refcnt")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304162125.18b7bcdd-oliver.sang@intel.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
CC: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Link: https://lore.kernel.org/r/20230420182508.2417582-1-mbizon@freebox.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a missing 8 byte for the header size calculation. The
ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which
points to skb_transport_header(). Currently we only check on the
calculated addresses fields using CmprI and CmprE fields, see:
https://www.rfc-editor.org/rfc/rfc6554#section-3
there is however a missing 8 byte inside the calculation which stands
for the fields before the addresses field. Those 8 bytes are represented
by sizeof(struct ipv6_rpl_sr_hdr) expression.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reported-by: maxpl0it <maxpl0it@protonmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the
IPV6_2292PKTOPTIONS case. Make sure to initialise
msg_control_is_user accordingly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c65 ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f4 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc4 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cde ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a816 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
used_address->name_len);
}
udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().
A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.
Instead, restore initial values before we return from udpv6_sendmsg().
Fixes: c71d8ebe7a ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Under high contention dst_entry::__refcnt becomes a significant bottleneck.
atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into
high retry rates on contention.
Switch the reference count to rcuref_t which results in a significant
performance gain. Rename the reference count member to __rcuref to reflect
the change.
The gain depends on the micro-architecture and the number of concurrent
operations and has been measured in the range of +25% to +130% with a
localhost memtier/memcached benchmark which amplifies the problem
massively.
Running the memtier/memcached benchmark over a real (1Gb) network
connection the conversion on top of the false sharing fix for struct
dst_entry::__refcnt results in a total gain in the 2%-5% range over the
upstream baseline.
Reported-by: Wangyang Guo <wangyang.guo@intel.com>
Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de
Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_entry::__refcnt is highly contended in scenarios where many connections
happen from and to the same IP. The reference count is an atomic_t, so the
reference count operations have to take the cache-line exclusive.
Aside of the unavoidable reference count contention there is another
significant problem which is caused by that: False sharing.
perf top identified two affected read accesses. dst_entry::lwtstate and
rtable::rt_genid.
dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into
a seperate cacheline vs. the read mostly members located at the beginning
of the struct.
That prevents false sharing vs. the struct members in the first 64
bytes of the structure, but there is also
dst_entry::lwtstate
which is located after the reference count and in the same cache line. This
member is read after a reference count has been acquired.
struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a
size of 112 bytes, which means that the struct members of rtable which
follow the dst member share the same cache line as dst_entry::__refcnt.
Especially
rtable::rt_genid
is also read by the contexts which have a reference count acquired
already.
When dst_entry:__refcnt is incremented or decremented via an atomic
operation these read accesses stall. This was found when analysing the
memtier benchmark in 1:100 mode, which amplifies the problem extremly.
Move the rt[6i]_uncached[_list] members out of struct rtable and struct
rt6_info into struct dst_entry to provide padding and move the lwtstate
member after that so it ends up in the same cache line.
The resulting improvement depends on the micro-architecture and the number
of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached
benchmark.
[ tglx: Rearrange struct ]
Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The issue fixed for bonding in commit c2edacf80e ("bonding / ipv6: no
addrconf for slaves separately from master") also exists in team driver.
However, we can't just disable ipv6 addrconf for team ports, as 'teamd'
will need it when nsns_ping watch is used in the user space.
Instead of preventing ipv6 addrconf, this patch only prevents RS packets
for team ports, as it did in commit b52e1cce31 ("ipv6: Don't send rs
packets to the interface of ARPHRD_TUNNEL").
Note that we do not prevent DAD packets, to avoid the changes getting
intricate / hacky. Also, usually sysctl dad_transmits is set to 1 and
only 1 DAD packet will be sent, and by now no libteam user complains
about DAD packets on team ports, unlike RS packets.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep the conntrack reference until policy checks have been performed for
IPsec V6 NAT support, just like ipv4.
The reference needs to be dropped before a packet is
queued to avoid having the conntrack module unloadable.
Fixes: 58a317f106 ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Madhu Koriginja <madhu.koriginja@nxp.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
icmp/icmp6 matches are baked into ip(6)_tables.ko.
This means that even if iptables-nft is used, a rule like
"-p icmp --icmp-type 1" will load the ip(6)tables modules.
Move them to xt_tcpdudp.ko instead to avoid this.
This will also allow to eventually add kconfig knobs to build kernels
that support iptables-nft but not iptables-legacy (old set/getsockopt
interface).
Signed-off-by: Florian Westphal <fw@strlen.de>
rcu_bh is no longer a win, especially for objects freed
with standard call_rcu().
Switch neighbour code to no longer disable BH when not necessary.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct ip6_flowlabel are rcu managed, and call_rcu() is used
to delay fl_free_rcu() after RCU grace period.
There is no point disabling BH for pure RCU lookups.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This clarifies raw_v6_match() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This clarifies __udp_v6_is_mcast_sock() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet6_mc_check() is essentially a read-only function.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_poll() reads sk->sk_err without socket lock held/owned.
We should used READ_ONCE() here, and update writers
to use WRITE_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This field can be read/written without lock synchronization.
tcp and dccp have been handled in different patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This field can be read/written without lock synchronization.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt6_check_neigh() uses read_lock() to protect n->nud_state reading.
This seems overkill and causes false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many lockless accesses to n->nud_state.
Before adding another one in the following patch,
add annotations to readers and writers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the feature was added it was enabled for SW timestamps only but
with current hardware the same out-of-order timestamps can be seen.
Let's expand the area for the feature to all types of timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.
Functions that are called from either xtables or nftables must assume
that they can be called in process context.
inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.
Add a small helper that takes care of this and use it.
Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In function rt6_nlmsg_size(), the length of nexthop is calculated
by multipling the nexthop length of fib6_info and the number of
siblings. However if the fib6_info has no lwtunnel but the siblings
have lwtunnels, the nexthop length is less than it should be, and
it will trigger a warning in inet6_rt_notify() as follows:
WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130
......
Call Trace:
<TASK>
fib6_add_rt2node+0x685/0xa30
fib6_add+0x96/0x1b0
ip6_route_add+0x50/0xd0
inet6_rtm_newroute+0x97/0xa0
rtnetlink_rcv_msg+0x156/0x3d0
netlink_rcv_skb+0x5a/0x110
netlink_unicast+0x246/0x350
netlink_sendmsg+0x250/0x4c0
sock_sendmsg+0x66/0x70
___sys_sendmsg+0x7c/0xd0
__sys_sendmsg+0x5d/0xb0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This bug can be reproduced by script:
ip -6 addr add 2002::2/64 dev ens2
ip -6 route add 100::/64 via 2002::1 dev ens2 metric 100
for i in 10 20 30 40 50 60 70;
do
ip link add link ens2 name ipv_$i type ipvlan
ip -6 addr add 2002::$i/64 dev ipv_$i
ifconfig ipv_$i up
done
for i in 10 20 30 40 50 60;
do
ip -6 route append 100::/64 encap ip6 dst 2002::$i via 2002::1
dev ipv_$i metric 100
done
ip -6 route append 100::/64 via 2002::1 dev ipv_70 metric 100
This patch fixes it by adding nexthop_len of every siblings using
rt6_nh_nlmsg_size().
Fixes: beb1afac51 ("net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230222083629.335683-2-luwei32@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix broken listing of set elements when table has an owner.
2) Fix conntrack refcount leak in ctnetlink with related conntrack
entries, from Hangyu Hua.
3) Fix use-after-free/double-free in ctnetlink conntrack insert path,
from Florian Westphal.
4) Fix ip6t_rpfilter with VRF, from Phil Sutter.
5) Fix use-after-free in ebtables reported by syzbot, also from Florian.
6) Use skb->len in xt_length to deal with IPv6 jumbo packets,
from Xin Long.
7) Fix NETLINK_LISTEN_ALL_NSID with ctnetlink, from Florian Westphal.
8) Fix memleak in {ip_,ip6_,arp_}tables in ENOMEM error case,
from Pavel Tikhomirov.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: x_tables: fix percpu counter block leak on error path when creating new netns
netfilter: ctnetlink: make event listener tracking global
netfilter: xt_length: use skb len to match in length_mt6
netfilter: ebtables: fix table blob use-after-free
netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
netfilter: conntrack: fix rmmod double-free race
netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack()
netfilter: nf_tables: allow to fetch set elements when table has an owner
====================
Link: https://lore.kernel.org/r/20230222092137.88637-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the stack where we allocate percpu counter block:
+-< __alloc_percpu
+-< xt_percpu_counter_alloc
+-< find_check_entry # {arp,ip,ip6}_tables.c
+-< translate_table
And it can be leaked on this code path:
+-> ip6t_register_table
+-> translate_table # allocates percpu counter block
+-> xt_register_table # fails
there is no freeing of the counter block on xt_register_table fail.
Note: xt_percpu_counter_free should be called to free it like we do in
do_replace through cleanup_entry helper (or in __ip6t_unregister_table).
Probability of hitting this error path is low AFAICS (xt_register_table
can only return ENOMEM here, as it is not replacing anything, as we are
creating new netns, and it is hard to imagine that all previous
allocations succeeded and after that one in xt_register_table failed).
But it's worth fixing even the rare leak.
Fixes: 71ae0dff02 ("netfilter: xtables: use percpu rule counters")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
We are not allowed to return an error at this point.
Looking at the code it looks like ret is always 0 at this
point, but its not.
t = find_table_lock(net, repl->name, &ret, &ebt_mutex);
... this can return a valid table, with ret != 0.
This bug causes update of table->private with the new
blob, but then frees the blob right away in the caller.
Syzbot report:
BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74
Workqueue: netns cleanup_net
Call Trace:
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
__ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613
...
ip(6)tables appears to be ok (ret should be 0 at this point) but make
this more obvious.
Fixes: c58dd2dd44 ("netfilter: Can't fail and free after table replacement")
Reported-by: syzbot+f61594de72d6705aea03@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes: acc641ab95 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add safeguard to check for NULL tupe in objects updates via
NFT_MSG_NEWOBJ, this should not ever happen. From Alok Tiwari.
2) Incorrect pointer check in the new destroy rule command,
from Yang Yingliang.
3) Incorrect status bitcheck in nf_conntrack_udp_packet(),
from Florian Westphal.
4) Simplify seq_print_acct(), from Ilia Gavrilov.
5) Use 2-arg optimal variant of kfree_rcu() in IPVS,
from Julian Anastasov.
6) TCP connection enters CLOSE state in conntrack for locally
originated TCP reset packet from the reject target,
from Florian Westphal.
The fixes#2 and #3 in this series address issues from the previous pull
nf-next request in this net-next cycle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change icmpv6_echo_reply() to return a drop reason.
For the moment, return NOT_SPECIFIED or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hosts can often receive neighbour discovery messages
that are not for them.
Use a dedicated drop reason to make clear the packet is dropped
for this normal case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a generic drop reason for any error detected
in ndisc_parse_options().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_redirect_rcv() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and values from icmpv6_notify().
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_router_discovery() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and SKB_CONSUMED.
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_rs() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_na() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_ns() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
iptables/nftables support responding to tcp packets with tcp resets.
The generated tcp reset packet passes through both output and postrouting
netfilter hooks, but conntrack will never see them because the generated
skb has its ->nfct pointer copied over from the packet that triggered the
reset rule.
If the reset rule is used for established connections, this
may result in the conntrack entry to be around for a very long
time (default timeout is 5 days).
One way to avoid this would be to not copy the nf_conn pointer
so that the rest packet passes through conntrack too.
Problem is that output rules might not have the same conntrack
zone setup as the prerouting ones, so its possible that the
reset skb won't find the correct entry. Generating a template
entry for the skb seems error prone as well.
Add an explicit "closing" function that switches a confirmed
conntrack entry to closed state and wire this up for tcp.
If the entry isn't confirmed, no action is needed because
the conntrack entry will never be committed to the table.
Reported-by: Russel King <linux@armlinux.org.uk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The "flavors" framework defined in RFC8986 [1] represents additional
operations that can modify or extend a subset of existing behaviors such as
SRv6 End, End.X and End.T. We report these flavors hereafter:
- Penultimate Segment Pop (PSP);
- Ultimate Segment Pop (USP);
- Ultimate Segment Decapsulation (USD).
Depending on how the Segment Routing Header (SRH) has to be handled, an
SRv6 End* behavior can support these flavors either individually or in
combinations.
In this patch, we only consider the PSP flavor for the SRv6 End behavior.
A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node
(i.e., the one applying the SRv6 Policy) when it needs to instruct the
penultimate SR Endpoint node listed in the SID List (carried by the SRH) to
remove the SRH from the IPv6 header.
Specifically, a PSP enabled SRv6 End behavior processes the SRH by:
i) decreasing the Segment Left (SL) from 1 to 0;
ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination
Address (DA);
iii) removing (i.e., popping) the outer SRH from the extension headers
following the IPv6 header.
It is important to note that PSP operation (steps i, ii, iii) takes place
only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and
does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of
PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the
PSP operation is not performed because it would not be possible to decrease
the SL from 1 to 0.
SL=2 SL=1 SL=0
| | |
For example, given the SRv6 policy (SID List := < X, Y, Z >):
- a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP
operation as Segment Left (SL) is 1, corresponding to the Penultimate
Segment of the SID List;
- a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the
PSP operation as the Segment Left is 2. This behavior instance will
apply the "standard" End packet processing, ignoring the configured PSP
flavor at all.
[1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The End nexthop lookup/input operations are moved into a new helper
function named input_action_end_finish(). This avoids duplicating the
code needed to compute the nexthop in the different flavors of the End
behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit e48c414ee6 ("[INET]: Generalise the TCP sock ID lookup routines")
commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another
commit 463c84b97f ("[NET]: Introduce inet_connection_sock") removed it.
Since we could track all of them through bpf and kprobe related tools
and the feature could print loads of information which might not be
that helpful even under a little bit pressure, the whole feature which
has been inactive for many years is no longer supported.
Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Creates three new drop reasons:
SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc).
SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit.
SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accurately reports what happened in icmpv6_notify() when handling
a packet.
This makes use of the new IPV6_BAD_EXTHDR drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds temporary scaffolding so that the Crypto API
completion function can take a void * instead of crypto_async_request.
Once affected users have been converted this can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.
We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.
Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.
[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/
Fixes: 323fbd0edf ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Take into account the IPV6_TCLASS socket option (DSCP) in
tcp_v6_connect(). Otherwise fib6_rule_match() can't properly
match the DSCP value, resulting in invalid route lookup.
For example:
ip route add unreachable table main 2001:db8::10/124
ip route add table 100 2001:db8::10/124 dev eth0
ip -6 rule add dsfield 0x04 table 100
echo test | socat - TCP6:[2001:db8::11]:54321,ipv6-tclass=0x04
Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.
Fixes: 2cc67cc731 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Take into account the IPV6_TCLASS socket option (DSCP) in
ip6_datagram_flow_key_init(). Otherwise fib6_rule_match() can't
properly match the DSCP value, resulting in invalid route lookup.
For example:
ip route add unreachable table main 2001:db8::10/124
ip route add table 100 2001:db8::10/124 dev eth0
ip -6 rule add dsfield 0x04 table 100
echo test | socat - UDP6:[2001:db8::11]:54321,ipv6-tclass=0x04
Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.
Fixes: 2cc67cc731 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code fix a bug that sk->sk_txrehash gets its default enable
value from sysctl_txrehash only when the socket is a TCP listener.
We should have sysctl_txrehash to set the default sk->sk_txrehash,
no matter TCP, nor listerner/connector.
Tested by following packetdrill:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4
// SO_TXREHASH == 74, default to sysctl_txrehash == 1
+0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0
+0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0
Fixes: 26859240e4 ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some applications seem to rely on RAW sockets.
If they use private netns, we can avoid piling all RAW
sockets bound to a given protocol into a single bucket.
Also place (struct raw_hashinfo).lock into its own
cache line to limit false sharing.
Alternative would be to have per-netns hashtables,
but this seems too expensive for most netns
where RAW sockets are not used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use existing helpers and drop reason codes for RAW input path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Swap is a function interface that provides exchange function. To avoid
code duplication, we can use swap function.
./net/ipv6/icmp.c:344:25-26: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3896
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230131063456.76302-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We recently found that our non-point-to-point tunnels were not
generating any IPv6 link local address and instead generating an
IPv6 compat address, breaking IPv6 communication on the tunnel.
Previously, addrconf_gre_config always would call addrconf_addr_gen
and generate a EUI64 link local address for the tunnel.
Then commit e5dd729460 changed the code path so that add_v4_addrs
is called but this only generates a compat IPv6 address for
non-point-to-point tunnels.
I assume the compat address is specifically for SIT tunnels so
have kept that only for SIT - GRE tunnels now always generate link
local addresses.
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
This issue would also have affected SIT tunnels.
Commit e5dd729460 changed the code path so that GRE tunnels
generate an IPv6 address based on the tunnel source address.
It also changed the code path so GRE tunnels don't call addrconf_addr_gen
in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode
when the IN6_ADDR_GEN_MODE is changed.
This patch aims to fix this issue by moving the code in addrconf_notify
which calls the addr gen for GRE and SIT into a separate function
and calling it in the places that expect the IPv6 address to be
generated.
The previous addrconf_dev_config is renamed to addrconf_eth_config
since it only expected eth type interfaces and follows the
addrconf_gre/sit_config format.
A part of this changes means that the loopback address will be
attempted to be configured when changing addr_gen_mode for lo.
This should not be a problem because the address should exist anyway
and if does already exist then no error is produced.
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are multiple ICMP rate limiting mechanisms:
* Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec
* v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask
* v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask
However, when ICMP output is limited, there is no way to tell
which limit has been hit or even if the limits are responsible
for the lack of ICMP output.
Add counters for each of the cases above. As we are within
local_bh_disable(), use the __INC stats variant.
Example output:
# nstat -sz "*RateLimit*"
IcmpOutRateLimitGlobal 134 0.0
IcmpOutRateLimitHost 770 0.0
Icmp6OutRateLimitHost 84 0.0
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working. On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.
This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent. There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.
The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.
Cc: stable@vger.kernel.org
Fixes: 46c7655f0b ("ipv6: decrease hop limit counter in ip6_forward()")
Signed-off-by: Gergely Risko <gergely.risko@gmail.com>
Tested-by: Gergely Risko <gergely.risko@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per cpu entries are no longer used in consideration
for doing gc or not. Remove the extra per cpu entries
pull to directly check for time and perform gc.
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The total cork length created by ip6_append_data includes extension
headers, so we must exclude them when comparing them against the
IPV6_CHECKSUM offset which does not include extension headers.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Fixes: 357b40a18b ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero-length arrays are deprecated[1]. Replace struct ipv6_rpl_sr_hdr's
"segments" union of 0-length arrays with flexible arrays. Detected with
GCC 13, using -fstrict-flex-arrays=3:
In function 'rpl_validate_srh',
inlined from 'rpl_build_state' at ../net/ipv6/rpl_iptunnel.c:96:7:
../net/ipv6/rpl_iptunnel.c:60:28: warning: array subscript <unknown> is outside array bounds of 'struct in6_addr[0]' [-Warray-bounds=]
60 | if (ipv6_addr_type(&srh->rpl_segaddr[srh->segments_left - 1]) &
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../include/net/rpl.h:12,
from ../net/ipv6/rpl_iptunnel.c:13:
../include/uapi/linux/rpl.h: In function 'rpl_build_state':
../include/uapi/linux/rpl.h:40:33: note: while referencing 'addr'
40 | struct in6_addr addr[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230105221533.never.711-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
Merge in the left-over fixes before the net-next pull-request.
net/mptcp/subflow.c
d3295fee3c ("mptcp: use proper req destructor for IPv6")
36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
IPv6/TCP and GRO stacks can build big TCP packets with an added
temporary Hop By Hop header.
Is GSO is not involved, then the temporary header needs to be removed in
the driver. This patch provides a generic helper for drivers that need
to modify their headers in place.
Tested:
Compiled and ran with ethtool -K eth1 tso off
Could send Big TCP packets
Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20221210041646.3587757-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in bonding it reused the IFF_SLAVE flag and checked it
in ipv6 addrconf to prevent ipv6 addrconf.
However, it is not a proper flag to use for no ipv6 addrconf, for
bonding it has to move IFF_SLAVE flag setting ahead of dev_open()
in bond_enslave(). Also, IFF_MASTER/SLAVE are historical flags
used in bonding and eql, as Jiri mentioned, the new devices like
Team, Failover do not use this flag.
So as Jiri suggested, this patch adds IFF_NO_ADDRCONF in priv_flags
of the device to indicate no ipv6 addconf, and uses it in bonding
and moves IFF_SLAVE flag setting back to its original place.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the behaviour of ip6_datagram_connect to consider the interface
set by the IPV6_UNICAST_IF socket option, similarly to udpv6_sendmsg.
This change is the IPv6 counterpart of the fix for IP_UNICAST_IF.
The tests introduced by that patch showed that the incorrect
behavior is present in IPv6 as well.
This patch fixes the broken test.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/202210062117.c7eef1a3-oliver.sang@intel.com
Fixes: 0e4d354762 ("net-next: Fix IP_UNICAST_IF option behavior for connected sockets")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow UDP_L4 for robust packets.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the kernel was short on (atomic) memory and failed to allocate it -
don't proceed to creation of request socket. Otherwise the socket would
be unsigned and userspace likely doesn't expect that the TCP is not
MD5-signed anymore.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To do that, separate two scenarios:
- where it's the first MD5 key on the system, which means that enabling
of the static key may need to sleep;
- copying of an existing key from a listening socket to the request
socket upon receiving a signed TCP segment, where static key was
already enabled (when the key was added to the listening socket).
Now the life-time of the static branch for TCP-MD5 is until:
- last tcp_md5sig_info is destroyed
- last socket in time-wait state with MD5 key is closed.
Which means that after all sockets with TCP-MD5 keys are gone, the
system gets back the performance of disabled md5-key static branch.
While at here, provide static_key_fast_inc() helper that does ref
counter increment in atomic fashion (without grabbing cpus_read_lock()
on CONFIG_JUMP_LABEL=y). This is needed to add a new user for
a static_key when the caller controls the lifetime of another user.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
ipsec-next 2022-11-26
1) Remove redundant variable in esp6.
From Colin Ian King.
2) Update x->lastused for every packet. It was used only for
outgoing mobile IPv6 packets, but showed to be usefull
to check if the a SA is still in use in general.
From Antony Antony.
3) Remove unused variable in xfrm_byidx_resize.
From Leon Romanovsky.
4) Finalize extack support for xfrm.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add extack to xfrm_set_spdinfo
xfrm: add extack to xfrm_alloc_userspi
xfrm: add extack to xfrm_do_migrate
xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
xfrm: add extack to xfrm_del_sa
xfrm: add extack to xfrm_add_sa_expire
xfrm: a few coding style clean ups
xfrm: Remove not-used total variable
xfrm: update x->lastused for every packet
esp6: remove redundant variable err
====================
Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
ipsec 2022-11-23
1) Fix "disable_policy" on ipv4 early demuxP Packets after
the initial packet in a flow might be incorectly dropped
on early demux if there are no matching policies.
From Eyal Birger.
2) Fix a kernel warning in case XFRM encap type is not
available. From Eyal Birger.
3) Fix ESN wrap around for GSO to avoid a double usage of a
sequence number. From Christian Langrock.
4) Fix a send_acquire race with pfkey_register.
From Herbert Xu.
5) Fix a list corruption panic in __xfrm_state_delete().
Thomas Jarosch.
6) Fix an unchecked return value in xfrm6_init().
Chen Zhongjin.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix ignored return value in xfrm6_init()
xfrm: Fix oops in __xfrm_state_delete()
af_key: Fix send_acquire race with pfkey_register
xfrm: replay: Fix ESN wrap around for GSO
xfrm: lwtunnel: squelch kernel warning in case XFRM encap type is not available
xfrm: fix "disable_policy" on ipv4 early demux
====================
Link: https://lore.kernel.org/r/20221123093117.434274-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly. However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.
Let's update saddr under the bhash bucket's lock.
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s1.bind(('127.0.0.1', 10000))
s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
# or s1.connect(('127.0.0.1', 10000))
s2 = socket()
s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s2.bind(('0.0.0.0', 10000))
s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL
s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.
If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
<TASK>
unregister_pernet_subsys+0x31/0x3e
xfrm6_fini+0x16/0x30 [ipv6]
ip6_route_init+0xcd/0x128 [ipv6]
inet6_init+0x29c/0x602 [ipv6]
...
Fix it by catching the error return value of register_pernet_subsys().
Fixes: 8d068875ca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port()
fails, so some ->get_port() functions return just 1 on failure and the
callers return -EADDRINUSE instead.
However, mptcp_get_port() can return -EINVAL. Let's not ignore the error.
Note the only exception is inet_autobind(), all of whose callers return
-EAGAIN instead.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These cases were done with this Coccinelle:
@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- + E
- - E
)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- - E
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- - E
+ F
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- + E
+ F
- - E
)
And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
These cases were done with this Coccinelle:
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I > E);
+ I = get_random_u32_below(E + 1);
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I >= E);
+ I = get_random_u32_below(E);
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I < E);
+ I = get_random_u32_above(E - 1);
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I <= E);
+ I = get_random_u32_above(E);
@@
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (!I);
+ I = get_random_u32_above(0);
@@
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I == 0);
+ I = get_random_u32_above(0);
@@
expression E;
@@
- E + 1 + get_random_u32_below(U32_MAX - E)
+ get_random_u32_above(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx).
Adopt SMP safe DEV_STATS_{INC|ADD}() to update dev->stats fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adopt atomic_try_cmpxchg() which is slightly more efficient.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use udp_table directly in most places.
Instead, access it via net->ipv4.udp_table.
The access will be valid only while initialising udp_table
itself and creating/destroying each netns.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use the global udp_seq_afinfo.udp_table
to fetch a UDP hash table.
Instead, set NULL to udp_seq_afinfo.udp_table for UDP and get
a proper table from net->ipv4.udp_table.
Note that we still need udp_seq_afinfo.udp_table for UDP LITE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use the global sk->sk_prot->h.udp_table
to fetch a UDP hash table.
Instead, set NULL to sk->sk_prot->h.udp_table for UDP and get
a proper table from net->ipv4.udp_table.
Note that we still need sk->sk_prot->h.udp_table for UDP LITE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The change is mainly to keep reverse
christmas tree order.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Fix sparse warning in the new nft_inner expression, reported
by Jakub Kicinski.
2) Incorrect vlan header check in nft_inner, from Peng Wu.
3) Two patches to pass reset boolean to expression dump operation,
in preparation for allowing to reset stateful expressions in rules.
This adds a new NFT_MSG_GETRULE_RESET command. From Phil Sutter.
4) Inconsistent indentation in nft_fib, from Jiapeng Chong.
5) Speed up siphash calculation in conntrack, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: use siphash_4u64
netfilter: rpfilter/fib: clean up some inconsistent indenting
netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET
netfilter: nf_tables: Extend nft_expr_ops::dump callback parameters
netfilter: nft_inner: fix return value check in nft_inner_parse_l2l3()
netfilter: nft_payload: use __be16 to store gre version
====================
Link: https://lore.kernel.org/r/20221115095922.139954-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a 'reset' flag just like with nft_object_ops::dump. This will be
useful to reset "anonymous stateful objects", e.g. simple rule counters.
No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=q04p
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20221108' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
rxrpc changes
David Howells says:
====================
rxrpc: Increasing SACK size and moving away from softirq, part 1
AF_RXRPC has some issues that need addressing:
(1) The SACK table has a maximum capacity of 255, but for modern networks
that isn't sufficient. This is hard to increase in the upstream code
because of the way the application thread is coupled to the softirq
and retransmission side through a ring buffer. Adjustments to the rx
protocol allows a capacity of up to 8192, and having a ring
sufficiently large to accommodate that would use an excessive amount
of memory as this is per-call.
(2) Processing ACKs in softirq mode causes the ACKs get conflated, with
only the most recent being considered. Whilst this has the upside
that the retransmission algorithm only needs to deal with the most
recent ACK, it causes DATA transmission for a call to be very bursty
because DATA packets cannot be transmitted in softirq mode. Rather
transmission must be delegated to either the application thread or a
workqueue, so there tend to be sudden bursts of traffic for any
particular call due to scheduling delays.
(3) All crypto in a single call is done in series; however, each DATA
packet is individually encrypted so encryption and decryption of large
calls could be parallelised if spare CPU resources are available.
This is the first of a number of sets of patches that try and address them.
The overall aims of these changes include:
(1) To get rid of the TxRx ring and instead pass the packets round in
queues (eg. sk_buff_head). On the Tx side, each ACK packet comes with
a SACK table that can be parsed as-is, so there's no particular need
to maintain our own; we just have to refer to the ACK.
On the Rx side, we do need to maintain a SACK table with one bit per
entry - but only if packets go missing - and we don't want to have to
perform a complex transformation to get the information into an ACK
packet.
(2) To try and move almost all processing of received packets out of the
softirq handler and into a high-priority kernel I/O thread. Only the
transferral of packets would be left there. I would still use the
encap_rcv hook to receive packets as there's a noticeable performance
drop from letting the UDP socket put the packets into its own queue
and then getting them out of there.
(3) To make the I/O thread also do all the transmission. The app thread
would be responsible for packaging the data into packets and then
buffering them for the I/O thread to transmit. This would make it
easier for the app thread to run ahead of the I/O thread, and would
mean the I/O thread is less likely to have to wait around for a new
packet to come available for transmission.
(4) To logically partition the socket/UAPI/KAPI side of things from the
I/O side of things. The local endpoint, connection, peer and call
objects would belong to the I/O side. The socket side would not then
touch the private internals of calls and suchlike and would not change
their states. It would only look at the send queue, receive queue and
a way to pass a message to cause an abort.
(5) To remove as much locking, synchronisation, barriering and atomic ops
as possible from the I/O side. Exclusion would be achieved by
limiting modification of state to the I/O thread only. Locks would
still need to be used in communication with the UDP socket and the
AF_RXRPC socket API.
(6) To provide crypto offload kernel threads that, when there's slack in
the system, can see packets that need crypting and provide
parallelisation in dealing with them.
(7) To remove the use of system timers. Since each timer would then send
a poke to the I/O thread, which would then deal with it when it had
the opportunity, there seems no point in using system timers if,
instead, a list of timeouts can be sensibly consulted. An I/O thread
only then needs to schedule with a timeout when it is idle.
(8) To use zero-copy sendmsg to send packets. This would make use of the
I/O thread being the sole transmitter on the socket to manage the
dead-reckoning sequencing of the completion notifications. There is a
problem with zero-copy, though: the UDP socket doesn't handle running
out of option memory very gracefully.
With regard to this first patchset, the changes made include:
(1) Some fixes, including a fallback for proc_create_net_single_write(),
setting ack.bufferSize to 0 in ACK packets and a fix for rxrpc
congestion management, which shouldn't be saving the cwnd value
between calls.
(2) Improvements in rxrpc tracepoints, including splitting the timer
tracepoint into a set-timer and a timer-expired trace.
(3) Addition of a new proc file to display some stats.
(4) Some code cleanups, including removing some unused bits and
unnecessary header inclusions.
(5) A change to the recently added UDP encap_err_rcv hook so that it has
the same signature as {ip,ipv6}_icmp_error(), and then just have rxrpc
point its UDP socket's hook directly at those.
(6) Definition of a new struct, rxrpc_txbuf, that is used to hold
transmissible packets of DATA and ACK type in a single 2KiB block
rather than using an sk_buff. This allows the buffer to be on a
number of queues simultaneously more easily, and also guarantees that
the entire block is in a single unit for zerocopy purposes and that
the data payload is aligned for in-place crypto purposes.
(7) ACK txbufs are allocated at proposal and queued for later transmission
rather than being stored in a single place in the rxrpc_call struct,
which means only a single ACK can be pending transmission at a time.
The queue is then drained at various points. This allows the ACK
generation code to be simplified.
(8) The Rx ring buffer is removed. When a jumbo packet is received (which
comprises a number of ordinary DATA packets glued together), it used
to be pointed to by the ring multiple times, with an annotation in a
side ring indicating which subpacket was in that slot - but this is no
longer possible. Instead, the packet is cloned once for each
subpacket, barring the last, and the range of data is set in the skb
private area. This makes it easier for the subpackets in a jumbo
packet to be decrypted in parallel.
(9) The Tx ring buffer is removed. The side annotation ring that held the
SACK information is also removed. Instead, in the event of packet
loss, the SACK data attached an ACK packet is parsed.
(10) Allocate an skcipher request when needed in the rxkad security class
rather than caching one in the rxrpc_call struct. This deals with a
race between externally-driven call disconnection getting rid of the
skcipher request and sendmsg/recvmsg trying to use it because they
haven't seen the completion yet. This is also needed to support
parallelisation as the skcipher request cannot be used by two or more
threads simultaneously.
(11) Call udp_sendmsg() and udpv6_sendmsg() directly rather than going
through kernel_sendmsg() so that we can provide our own iterator
(zerocopy explicitly doesn't work with a KVEC iterator). This also
lets us avoid the overhead of the security hook.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Call udp_sendmsg() and udpv6_sendmsg() directly rather than calling
kernel_sendmsg() as the latter assumes we want a kvec-class iterator.
However, zerocopy explicitly doesn't work with such an iterator.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Change the udp encap_err_rcv signature to match ip_icmp_error() and
ipv6_icmp_error() so that those can be used from the called function and
export them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cdb1876192 ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is used to track when a duplicate segment received by various
reassembly units is dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but
d38afeec26 ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.
Cc: <stable@vger.kernel.org> # 6.0
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927a ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)
Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit b9b312a7a4
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).
This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()
Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.
[1]
skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:120
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Workqueue: mld mld_ifc_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116
lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116
sp : ffff800020dd3b60
x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800
x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200
x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38
x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9
x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80
x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80
x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00
x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000
x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
skb_panic+0x4c/0x50 net/core/skbuff.c:116
skb_over_panic net/core/skbuff.c:125 [inline]
skb_put+0xd4/0xdc net/core/skbuff.c:2049
ip6_mc_hdr net/ipv6/mcast.c:1714 [inline]
mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765
add_grhead net/ipv6/mcast.c:1851 [inline]
add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989
mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115
mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parameter 'msg' has never been used by __sock_cmsg_send, so we can remove it
safely.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the receiver process and the BH runs on different cores,
udp_rmem_release() experience a cache miss while accessing sk_rcvbuf,
as the latter shares the same cacheline with sk_forward_alloc, written
by the BH.
With this patch, UDP tracks the rcvbuf value and its update via custom
SOL_SOCKET socket options, and copies the forward memory threshold value
used by udp_rmem_release() in a different cacheline, already accessed by
the above function and uncontended.
Since the UDP socket init operation grown a bit, factor out the common
code between v4 and v6 in a shared helper.
Overall the above give a 10% peek throughput increase under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reuse the unlock label above and need not repeat the same code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().
To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().
DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable err is being assigned a value that is not read, the assignment
is redundant and so is the variable. Remove it.
Cleans up clang scan warning:
net/ipv6/esp6_offload.c:64:7: warning: Although the value stored to 'err'
is used in the enclosing expression, the value is never actually read
from 'err' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When using GSO it can happen that the wrong seq_hi is used for the last
packets before the wrap around. This can lead to double usage of a
sequence number. To avoid this, we should serialize this last GSO
packet.
Fixes: d7dbefc45c ("xfrm: Add xfrm_replay_overflow functions for offloading")
Co-developed-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently netfilter's rpfilter and fib modules implicitely initialise
->flowic_uid with 0. This is normally the root UID. However, this isn't
the case in user namespaces, where user ID 0 is mapped to a different
kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get
the root UID of the user namespace, thus keeping the same behaviour
whether or not we're running in a user namepspace.
Note, this is similar to commit 8bcfd0925e ("ipv4: add missing
initialization for flowi4_uid"), which fixed the rp_filter sysctl.
Fixes: 622ec2c9d5 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.
However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.
For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.
cpu1 cpu2
+----+ +----+
__ip[46]_datagram_connect() reuseport_grow()
. .
|- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size)
| . |
| |- rcu_read_lock()
| |- reuse = rcu_dereference(sk->sk_reuseport_cb)
| |
| | | /* reuse->has_conns == 0 here */
| | |- more_reuse->has_conns = reuse->has_conns
| |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */
| | |
| | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
| | | more_reuse)
| `- rcu_read_unlock() `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED
Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().
[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops
under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To
avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE()
for the reads and writes.
Thanks to Eric Dumazet for providing the syzbot report:
BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect
write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0:
tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240
__inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724
__sys_connect_file net/socket.c:1976 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1993
__do_sys_connect net/socket.c:2003 [inline]
__se_sys_connect net/socket.c:2000 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:2000
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1:
tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted
6.0.0-rc4-syzkaller-00331-g4ed9c1e971b1-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 08/26/2022
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 086d49058c ("ipv6: annotate some data-races around sk->sk_prot")
fixed some data-races around sk->sk_prot but it was not enough.
Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot
without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid
load tearing.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM. However, commit 03485f2adc ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:
setsockopt(IPV6_ADDRFORM) sendmsg()
+-----------------------+ +-------+
- do_ipv6_setsockopt(sk, ...) - udpv6_sendmsg(sk, ...)
- sockopt_lock_sock(sk) ^._ called via udpv6_prot
- lock_sock(sk) before WRITE_ONCE()
- WRITE_ONCE(sk->sk_prot, &tcp_prot)
- inet6_destroy_sock() - if (!corkreq)
- sockopt_release_sock(sk) - ip6_make_skb(sk, ...)
- release_sock(sk) ^._ lockless fast path for
the non-corking case
- __ip6_append_data(sk, ...)
- ipv6_local_rxpmtu(sk, ...)
- xchg(&np->rxpmtu, skb)
^._ rxpmtu is never freed.
- goto out_no_dst;
- lock_sock(sk)
For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e27326009a ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there. Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.
We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport. So they can be posted as a follow-up later for net-next.
Fixes: 03485f2adc ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4b340ae20d ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM. After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.
This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.
However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 03485f2adc ("udpv6: Add lockless
sendmsg() support"). We will fix this case in the following patch.
Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.
Fixes: 4b340ae20d ("IPv6: Complete IPV6_DONTFRAG support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the introduced field for correct operation with VRF devices instead
of conditionally overwriting flowic_oif. This is a partial revert of
commit b575b24b8e ("netfilter: Fix rpfilter dropping vrf packets by
mistake"), implementing a simpler solution.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-03
We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).
The main changes are:
1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.
2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.
3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.
4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.
5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.
6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.
7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.
8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.
9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.
10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.
11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.
12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.
13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.
14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.
15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.
16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.
17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.
18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.
19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================
Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ip_tunnel_netlink_parms to parse netlink msg of ip_tunnel_parm.
Reduces duplicate code, no actual functional changes.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ip_tunnel_netlink_encap_parms to parse netlink msg of ip_tunnel_encap.
Reduces duplicate code, no actual functional changes.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Refactor selftests to use an array of structs in xfrm_fill_key().
From Gautam Menghani.
2) Drop an unused argument from xfrm_policy_match.
From Hongbin Wang.
3) Support collect metadata mode for xfrm interfaces.
From Eyal Birger.
4) Add netlink extack support to xfrm.
From Sabrina Dubroca.
Please note, there is a merge conflict in:
include/net/dst_metadata.h
between commit:
0a28bfd497 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
from the net-next tree and commit:
5182a5d48c ("net: allow storing xfrm interface metadata in metadata_dst")
from the ipsec-next tree.
Can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-09-29
1) Use the inner instead of the outer protocol for GSO on inter
address family tunnels. This fixes the GSO case for address
family tunnels. From Sabrina Dubroca.
2) Reset ipcomp_scratches with NULL when freed, otherwise
it holds obsolete address. From Khalid Masum.
3) Reinject transport-mode packets through workqueue
instead of a tasklet. The tasklet might take too
long to finish. From Liu Jian.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
