Make a separate .elif section for MACHINE_ARCH==powerpc, and subdivide
the MACHINE_CPUARCH values under it. If at some point more sanitizer
libraries become available for powerpc CPU architectures, they can be
added before the "nothing for other powerpc yet" case. Similar for the
MACHINE_ARCH==arm case.
PR: 262706
Fixes: e77a1bb275
MFC after: 3 days
We do not conflate SYSROOT with STAGE_ROOT/DESTDIR during
DIRDEPS_BUILD
Make sure mktables looks in the right place.
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D44415
Execute the mandoc -Tlint option on assert(3). This results in two areas
of updates:
Remove invalid Rs block
Remove invalid Re block
Reviewed by: mhorne
MFC after: 3 days
Pull Request: https://github.com/freebsd/freebsd-src/pull/1132
I reorganized the libclang_rt Makefile in e77a1bb275 to make it more
readable and maintainable, but the check for 32-bit powerpc was wrong.
This caused almost no libclang_rt libraries to be built for powerpc64
and powerpc64le.
PR: 262706
Reported by: tuexen
Fixes: e77a1bb275
MFC after: 3 days
The byte-order independent code has been reported to fail on powerpc64.
Add some more debug statements to help identify the parametrs used and
to verify the correct operation of the byte-swap macros used..
We now have a detailed man page describing both MPASS and KASSERT. Give
a warning that careless use of MPASS can result in inadequate assertion
messages, and point to the MPASS(9) page which describes this.
While here add a comment above the KASSERT definitions pointing to the
man page.
Suggested by: bz
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44438
The macro originates from BSD/OS, with a different etymology than what
is presented. Add a brief HISTORY section to capture this.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44439
I am unsure of its exact historical usage, but, we no longer ship GCC
with FreeBSD, and it should have been removed.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44440
Both wcount and wresid are ssize_t so this cast is not needed. Just
remove it so the code is easier to read.
Signed-off-by: Collin Funk <collin.funk1@gmail.com>
Reviewed by: emaste, zlei
Pull Request: https://github.com/freebsd/freebsd-src/pull/1116
Improving first-glance comprehension that this manual page applies to
igb/lem interfaces provided by the em(4) driver.
While here, tag SPDX, link the framework, and shuffle a sentence to fix
linter warning.
Co-authored-by: mhorne
Reviewed by: mhorne
MFC after: 1 week
Pull Request: https://github.com/freebsd/freebsd-src/pull/1134
Use a switch statement to decide which exceptions we need to call
dbg_enable for. This simplifies adding more esceptions to the list in
the future.
Reviewed by: jhb
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44352
When listing watchpoints we read the raw registers. To ensure we print
an accurate list always set the watchpoint and breakpoint registers.
Sponsored by: Arm Ltd
Reviewed by: jhb
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44351
When an exception is pending when single stepping we may execute the
handler for that exception rather than the single step handler. This
could cause the scheduler to fire to run a new thread. This will mean
we single step to a new thread causing unexpected results.
Handle this by masking non-debug exceptions. This will cause issues
when stepping over instructions that access the DAIF values so future
work is needed to handle these cases, but for most code this now works
as expected.
Reviewed by: jhb
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44350
Rather than try to detect when vfp_save_state is called by savectx use
a separate function that sets up the pcb as needed.
Reviewed by: imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D43304
Add support for extra registers to the arm64 getcontextx. As no
registers are defined this just adds the extra register list and an end
context.
Reviewed by: kib
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44255
This will be used as the base of a non-trivial implementation.
Reviewed by: kib
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44254
To support recent extensions to the Arm architecture we may need to
store more or larger registers when sending a signal.
To support this create a list of these extra registers. Userspace that
needs to access a register in the signal handler can then walk the list
to find the correct register struct and read/write its contents.
Reviewed by: kib, markj (earlier version)
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D43302
This will be used by bhyve to build a device tree when booting arm64
guests.
Reviewed by: corvink, jhb
MFC after: 1 week
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40994
Currently bhyve implements a ns16550-compatible UART in uart_emul.c.
This file also contains generic code to manage RX FIFOs and to handle
reading from and writing to a TTY. bhyve instantiates UARTs to
implement COM devices (via pci_lpc.c) and PCI UART devices.
The arm64 port will bring with it a PL011 device model which is used as
the default console (i.e., no COM ports). To simplify its integration,
add a UART "backend" layer which lets UART device models allocate an RX
FIFO and interact with TTYs without duplicating code. In particular,
code in uart_backend.* is to be shared among device models, and the
namespace for uart_emul.* is changed to uart_ns16550_*.
This is based on andrew@'s work in
https://github.com/zxombie/freebsd/tree/bhyvearm64 but I've made a
number of changes, particularly with respect to naming and source code
organization.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 1 week
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40993
TCP_USE_DDP is a kernel-only macro, so we must exclude it in
libsysdecode to avoid breaking the build.
Fixes: 3d0a736796 ("tcp: Add a new kernel-only TCP_USE_DDP [...]")
Use a separate state for when a request to set RX_QUIESCE has been
sent but the resulting TCB reply has not been received. In
particular, this correctly handles the case where data has been
received and queued in the receive queue before the quiesce request
takes effect.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44435
Since this is an optimization, ignore failures to enable the option.
For the server side, defer enabling DDP until the first non-NULLPROC
RPC is received. This allows TLS handling (which uses NULLPROC RPCs)
to enable TLS offload first.
Reviewed by: rmacklem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44002
When this socket option is enabled, relatively large contiguous
buffers are allocated and used to receive data from the remote
connection. When data is received a wrapper M_EXT mbuf is queued to
the socket's receive buffer. This reduces the length of the linked
list of received mbufs and allows consumers to consume receive data in
larger chunks.
To minimize reprogramming the page pods in the adapter, receive
buffers for a given connection are recycled. When a buffer has been
fully consumed by the receiver and freed, the buffer is placed on a
per-connection free buffers list.
The size of the receive buffers defaults to 256k and can be set via
the hw.cxgbe.toe.ddp_rcvbuf_len sysctl. The
hw.cxgbe.toe.ddp_rcvbuf_cache sysctl (defaults to 4) determines the
maximum number of free buffers cached per connection. Note that this
limit does not apply to "in-flight" receive buffers that are
associated with mbufs in the socket's receive buffer.
Co-authored-by: Navdeep Parhar <np@FreeBSD.org>
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44001
This socket option can be used by in-kernel consumers (like NFS) to
request a NIC to use optimized receive of large buffers for a
connection. The current use case is to support DDP by the TOE on
Chelsio NICs.
Reviewed by: rscheff, tuexen, glebius
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44000
We've removed TI support in 3416e102c4 ("arm: Remove TI code from GENERIC")
so no need to build the DTBs now.
Sponsored by: Beckhoff Automation GmbH & Co. KG
When profiling an IP6 heavy workload, I noticed that we were
getting a lot of cache misses in ip6_output() around
ip6_pktopts. This was happening because the TCP stack passes
inp->in6p_outputopts even if all options are unused. So in the
common case of no options present, pkt_opts is not null, and is
checked repeatedly for different options. Since ip6_pktopts is
large (4 cachelines), and every field is checked, we take 4
cache misses (2 of which tend to be hidden by the adjacent line
prefetcher).
To fix this common case, I introduced a new flag in ip6_pktopts
(ip6po_valid) which tracks which options have been set. In the
common case where nothing is set, this causes just a single
cache miss to load. It also eliminates a test for some options
(if (opt != NULL && opt->val >= const) vs if ((optvalid & flag) !=0 )
To keep the struct the same size in 64-bit kernels, and to keep
the integer values (like ip6po_hlim, ip6po_tclass, etc) on the
same cacheline, I moved them to the top.
As suggested by zlei, the null check in MAKE_EXTHDR() becomes
redundant, and can be removed.
For our web server workload (with the ip6po_tclass option set),
this drops the CPI from 2.9 to 2.4 for ip6_output
Differential Revision: https://reviews.freebsd.org/D44204
Reviewed by: bz, glebius, zlei
No Objection from: melifaro
Sponsored by: Netflix Inc.
move /etc/aliases and /etc/mail/aliases into the runtime package
this file is used by both sendmail and dma.
While here mark this file as a config file so 3way merge is performed
This is made in order to be able to find add the post-install scripts
for the kernel, where PKGNAME varies for each KERNCONF but we don't want
to dynamically duplicated the kernel.ucl file.
At the same time we don't want the *-dbg* packages to actually include
those post-install scripts
Re-apply the -S switch to disable soft-updates in memory disks (commit
8b1292ac52). This might be beneficial when tmpfs(5) is not present in
the kernel, as this can cause mdmfs(8)'s auto keyword to fallback to
using md(4).
PR: 85558
MFC after: 1 week
Reviewed by: imp, emaste, brooks
Differential Revision: https://reviews.freebsd.org/D43242
Not checking for either WIFEXITED(status) or zero result results in
never finishing the loop.
PR: 277764
Reviewed by: kevans (previous version)
Discussed with: Daniel Tameling
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D44401
Make __ prefixed versions available without the pollution of sys/acl.h
(and by extension sys/param.h).
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D44382
The (optional) third argument of fcntl is sometimes a pointer so change
the type to intptr_t. Update the libc-internal defintion (actually used
by libthr) to take a fixed intptr_t argument rather than pretending it's
a variadic function. (That worked because all supported architectures
pass variadic arguments as though the function was declared with those
types. In CheriBSD that changes because variadic arguments are passed
via a bounded array.)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D44381
In the next commit I will update syscalls.master to use struct __siginfo
(which actually exists) so this update will be needed to make
generated files (from make sysent) align.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D44380
sigfastblock is declared to take a void * argument in the manpage in
headers so declare it that way and use SAL annotations to say it
interacts with a 32-bit word.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D44379