Since 131b94a10a (test-lib.sh: Use GLIBC_TUNABLES instead of
MALLOC_CHECK_ on glibc >= 2.34, 2022-03-04) compiling with
SANITIZE=leak has missed reporting some leaks. The old MALLOC_CHECK
method used before glibc 2.34 seems to have been (mostly?) compatible
with it, but after 131b94a10a e.g. running:
TEST_NO_MALLOC_CHECK=1 make SANITIZE=leak test T=t6437-submodule-merge.sh
Would report a leak in builtin/commit.c, but this would not:
TEST_NO_MALLOC_CHECK= make SANITIZE=leak test T=t6437-submodule-merge.sh
Since the interaction is clearly breaking the SANITIZE=leak mode,
let's mark them as explicitly incompatible.
A related regression for SANITIZE=address was fixed in
067109a5e7 (tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK,
2022-04-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By automatically invoking chainlint.sed upon each test it runs,
`test_run_` in test-lib.sh ensures that broken &&-chains will be
detected early as tests are modified or new are tests created since it
is typical to run a test script manually (i.e. `./t1234-test-script.sh`)
during test development. Now that the implementation of chainlint.pl is
complete, modify test-lib.sh to invoke it automatically instead of
chainlint.sed each time a test script is run.
This change reduces the number of "linter" invocations from 26800+ (once
per test run) down to 1050+ (once per test script), however, a
subsequent change will drop the number of invocations to 1 per `make
test`, thus fully realizing the benefit of the new linter.
Note that the "magic exit code 117" &&-chain checker added by bb79af9d09
(t/test-lib: introduce --chain-lint option, 2015-03-20) which is built
into t/test-lib.sh is retained since it has near zero-cost and
(theoretically) may catch a broken &&-chain not caught by chainlint.pl.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`test_run_` in test-lib.sh "lints" the body of a test by sending it down
a `sed chainlint.sed | grep` pipeline; this happens once for each test
run by a test script. Although this pipeline may seem relatively cheap
in isolation, it can become expensive when invoked 26800+ times by `make
test`, once for each test run, despite the existence of only 16500+ test
definitions across all tests scripts.
This difference in the number of tests defined in the scripts (16500+)
and the number of tests actually run by `make test` (26800+) is
explained by the fact that some test scripts run a very large number of
small tests, all driven by a series of functions/loops which fill in the
test bodies. This means that certain test definitions are being linted
repeatedly (tens or hundreds of times) unnecessarily. To avoid such
unnecessary work, 2d86a96220 (t: avoid sed-based chain-linting in some
expensive cases, 2021-05-13) added an optimization hack which allows
individual scripts to manually suppress the unnecessary repeated linting
of the same test definition.
However, unlike chainlint.sed which checks a test body as the test is
run, chainlint.pl checks each test definition just once, no matter how
many times the test is run, thus the sort of optimization hack
introduced by 2d86a96220 is no longer needed and can be retired.
Therefore, revert 2d86a96220.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid repeatedly running getconf to ask libc version in the test
suite, and instead just as it once per script.
* pw/use-glibc-tunable-for-malloc-optim:
tests: cache glibc version check
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_
on glibc >= 2.34", 2022-03-04) introduced a check for the version of
glibc that is in use. This check is performed as part of
setup_malloc_check() which is called at least once for each test. As
the test involves forking `getconf` and `expr` cache the result and
use that within setup_malloc_check() to avoid forking these extra
processes for each test.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in previous on-list discussions[1] we have various tests that
will falsely report being leak-free because we're missing the relevant
exit code from LSAN as summarized below.
We should fix those issues, but in the meantime and as an additional
sanity check we can and should consider our own ASAN logs before
reporting that a test is leak-free.
Before this compiling with SANITIZE=leak and running:
./t6407-merge-binary.sh
Will exit successfully, now we'll get an error and an informative
message on:
GIT_TEST_SANITIZE_LEAK_LOG=true ./t6407-merge-binary.sh
Even better, as noted in the updated t/README we'll now error out when
combined with the "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
./t4058-diff-duplicates.sh
Why do we miss these leaks? Because:
* We have leaks inside "test_expect_failure" blocks, which by design
will not distinguish a "normal" failure from an abort() or
segfault. See [1] for a discussion of it shortcomings.
* We have "git" invocations outside of "test_expect_success",
e.g. setup code in the main body of the test, or in test helper
functions that don't use &&-chaining.
* Our tests will otherwise catch segfaults and abort(), but if we
invoke a command that invokes another command it needs to ferry the
exit code up to us.
Notably a command that e.g. might invoke "git pack-objects" might
itself exit with status 128 if that "pack-objects" segfaults or
abort()'s. If the test invoking the parent command(s) is using
"test_must_fail" we'll consider it an expected "ok" failure.
* run-command.c doesn't (but probably should) ferry up such exit
codes, so for e.g. "git push" tests where we expect a failure and an
underlying "git" command fails we won't ferry up the segfault or
abort exit code.
* We have gitweb.perl and some other perl code ignoring return values
from close(), i.e. ignoring exit codes from "git rev-parse" et al.
* We have in-tree shellscripts like "git-merge-one-file.sh" invoking
git commands, they'll usually return their own exit codes on "git"
failure, rather then ferrying up segfault or abort() exit code.
E.g. these invocations in git-merge-one-file.sh leak, but aren't
reflected in the "git merge" exit code:
src1=$(git unpack-file $2)
src2=$(git unpack-file $3)
That case would be easily "fixed" by adding a line like this after
each assignment:
test $? -ne 0 && exit $?
But we'd then in e.g. "t6407-merge-binary.sh" run into
write_tree_trivial() in "builtin/merge.c" calling die() instead of
ferrying up the relevant exit code.
Let's remove "TEST_PASSES_SANITIZE_LEAK=true" from tests we
were falsely marking as leak-free.
In the case of t6407-merge-binary.sh it was marked as leak-free in
9081a421a6 (checkout: fix "branch info" memory leaks,
2021-11-16). I'd previously removed other bad
"TEST_PASSES_SANITIZE_LEAK=true" opt-ins in the series merged in
ea05fd5fbf (Merge branch 'ab/keep-git-exit-codes-in-tests',
2022-03-16). The case of t1060-object-corruption.sh is more subtle,
and will be discussed in a subsequent commit.
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "GIT_TEST_PASSING_SANITIZE_LEAK=check" mode to the
test-lib.sh.
As noted in the updated "t/README" this compliments the existing
"GIT_TEST_PASSING_SANITIZE_LEAK=true" mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23).
Rather than document this all in one (even more) dense paragraph split
up the discussion of how it combines with --immediate into its own
paragraph following the discussion of
"GIT_TEST_SANITIZE_LEAK_LOG=true".
Before the removal of "test_external" in a preceding commit we would
have had to special-case t9700-perl-git.sh and t0202-gettext-perl.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "test_external" function added in [1]. This arguably makes
the output of t9700-perl-git.sh and friends worse. But as we'll argue
below the trade-off is worth it, since "chaining" to another TAP
emitter in test-lib.sh is more trouble than it's worth.
The new output of t9700-perl-git.sh is now:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
ok 2 - use t9700/test.pl to test Git.pm
# passed all 2 test(s)
1..2
Whereas before this change it would be:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
# run 1: Perl API (perl /home/avar/g/git/t/t9700/test.pl)
ok 2 - use Git;
[... omitting tests 3..46 from t/t9700/test.pl ...]
ok 47 - unquote escape sequences
1..47
# test_external test Perl API was ok
# test_external_without_stderr test no stderr: Perl API was ok
At the time of its addition supporting "test_external" was easy, but
when test-lib.sh itself started to emit TAP in [2] we needed to make
everything surrounding the emission of the plan consider
"test_external". I added that support in [2] so that we could run:
prove ./t9700-perl-git.sh :: -v
But since then in [3] the door has been closed on combining
$HARNESS_ACTIVE and -v, we'll now just die:
$ prove ./t9700-perl-git.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
So the only use of this has been that *if* we had failure in one of
these tests we could e.g. in CI see which test failed based on the
test number. Now we'll need to look at the full verbose logs to get
that same information.
I think this trade-off is acceptable given the reduction in
complexity, and it brings these tests in line with other similar
tests, e.g. the reftable tests added in [4] will be condensed down to
just one test, which invokes the C helper:
$ ./t0032-reftable-unittest.sh
ok 1 - unittests
# passed all 1 test(s)
1..1
It would still be nice to have that ":: -v" form work again, it
never *really* worked, but even though we've had edge cases test
output screwing up the TAP it mostly worked between d998bd4ab6 and
[3], so we may have been overzealous in forbidding it outright.
I have local patches which I'm planning to submit sooner than later
that get us to that goal, and in a way that isn't buggy. In the
meantime getting rid of this special case makes hacking on this area
of test-lib.sh easier, as we'll do in subsequent commits.
The switch from "perl" to "$PERL_PATH" here is because "perl" is
defined as a shell function in the test suite, see a5bf824f3b (t:
prevent '-x' tracing from interfering with test helpers' stderr,
2018-02-25). On e.g. the OSX CI the "command perl"... will be part of
the emitted stderr.
1. fb32c41008 (t/test-lib.sh: add test_external and
test_external_without_stderr, 2008-06-19)
2. d998bd4ab6 (test-lib: Make the test_external_* functions
TAP-aware, 2010-06-24)
3. 614fe01521 (test-lib: bail out when "-v" used under
"prove", 2016-10-22)
4. ef8a6c6268 (reftable: utility functions, 2021-10-07)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to run the test suite under a new
"GIT_TEST_SANITIZE_LEAK_LOG=true" mode, when true we'll log the leaks
we find an a new "test-results/<test-name>.leak" directory.
That new path is consistent with the existing
"test-results/<test-name>.<type>" results, except that those are all
files, not directories.
We also set "log_exe_name=1" to include the name of the executable in
the filename. This gives us files like "trace.git.<pid>" instead of
the default of "trace.<pid>". I.e. we'll be able to distinguish "git"
leaks from "test-tool", "git-daemon" etc.
We then set "dedup_token_length" to non-zero ("0" is the default) to
succinctly log a token we can de-duplicate these stacktraces on. The
string is simply a one-line stack-trace with only function names up to
N frames, which we limit at "9999" as a shorthand for
"infinite" (there appears to be no way to say "no limit").
With these combined we can now easily get e.g. the top 10 leaks in the
test suite grouped by full stacktrace:
grep -o -P -h '(?<=DEDUP_TOKEN: ).*' test-results/*.leak/trace.git.* | sort | uniq -c | sort -nr | head -n 10
Or add "grep -E -o '[^-]+'" to that to group by functions instead of
stack traces:
grep -o -P -h '(?<=DEDUP_TOKEN: ).*' test-results/*.leak/trace.git.* | grep -E -o '[^-]+' | sort | uniq -c | sort -nr | head -n 20
This new mode requires git to be compiled with SANITIZE=leak, rather
than explaining that in the documentation let's make it
self-documenting by bailing out if the user asks for this without git
having been compiled with SANITIZE=leak, as we do with
GIT_TEST_PASSING_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the documentation added in 956d2e4639 (tests: add a test mode
for SANITIZE=leak, run it in CI, 2021-09-23) for brevity.
The comment added in the same commit was also misleading: We skip
certain tests if SANITIZE=leak and GIT_TEST_PASSING_SANITIZE_LEAK=true,
not if we're compiled with SANITIZE=leak. Let's just remove the
comment, the control flow here is obvious enough that the code can
speak for itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to have those tests that fail return 0, and those
tests that succeed return 1. This is useful e.g. to run "--stress"
tests on tests that fail 99% of the time on some setup, i.e. to smoke
out the flaky run which yielded success.
In a subsequent commit a new SANITIZE=leak mode will make use of this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various "exit 1" checks that happened after our "die" handler
had been set up to use BAIL_OUT instead. See 234383cd40 (test-lib.sh:
use "Bail out!" syntax on bad SANITIZE=leak use, 2021-10-14) for the
benefits of the BAIL_OUT function.
The previous use of "error" here was not a logic error, but the "exit"
without "GIT_EXIT_OK" would emit the "FATAL: Unexpected exit with code
$code" message on top of the error we wanted to emit.
Since we'd also like to stop "prove" in its tracks here, the right
thing to do is to emit a "Bail out!" message.
Let's also move the "GIT_EXIT_OK=t" assignments to just above the
"exit [01]" in "test_done". It's not OK if we exit in
e.g. finalize_test_output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the control flow in test_done so that we'll set GIT_EXIT_OK=t
after we call test_atexit_handler(). This seems to have been a mistake
in 900721e15c (test-lib: introduce 'test_atexit', 2019-03-13). It
doesn't make sense to allow our "atexit" handling to call "exit"
without us emitting the errors we'll emit without GIT_EXIT_OK=t being
set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that these two functions never take N arguments, they'll only
ever receive one. They've needlessly used $@ over $1 since
41ac414ea2 (Sane use of test_expect_failure, 2008-02-01).
In the future we might want to pass the test source to these, but now
that's not the case. This preparatory change helps to clarify a
follow-up change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
source: <cover-v2-0.3-00000000000-20220630T101646Z-avarab@gmail.com>
* ab/test-quoting-fix:
config tests: fix harmless but broken "rm -r" cleanup
test-lib.sh: fix prepend_var() quoting issue
tests: add missing double quotes to included library paths
Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* ab/test-without-templates:
tests: don't assume a .git/info for .git/info/sparse-checkout
tests: don't assume a .git/info for .git/info/exclude
tests: don't assume a .git/info for .git/info/refs
tests: don't assume a .git/info for .git/info/attributes
tests: don't assume a .git/info for .git/info/grafts
tests: don't depend on template-created .git/branches
t0008: don't rely on default ".git/info/exclude"
Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
* ab/test-quoting-fix:
config tests: fix harmless but broken "rm -r" cleanup
test-lib.sh: fix prepend_var() quoting issue
tests: add missing double quotes to included library paths
Fix a quoting issue in the function introduced in
b9638d7286 (test-lib: make $GIT_BUILD_DIR an absolute path,
2022-02-27), running the test suite where the git checkout was on a
path with e.g. a space in it would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
As noted in c8a58ac5a5 (Revert "Don't create the $GIT_DIR/branches
directory on init", 2009-10-31) there was an attempt long ago in
0cc5691a8b (Don't create the $GIT_DIR/branches directory on init,
2009-10-30) to get rid of the legacy "branches" directory.
We should probably get rid of its creation by removing the
"templates/branches--" file. But whatever our default behavior, our
tests should be tightened up to explicitly create the .git/branches
directory if they rely on our default templates, to make the
dependency on those templates clear.
So let's amend the two tests that would fail if .git/branches wasn't
created. To do this introduce a new "TEST_CREATE_REPO_NO_TEMPLATE"
variable, which we'll set before sourcing test-lib.sh, and change the
"git clone" and "git init" commands in the tests themselves to
explicitly pass "--template=".
This way they won't get a .git/branches in either their top-level
.git, or in the ones they create. We can then amend the tests that
rely on the ".git/branches" directory existing to create it
explicitly, and to remove it after its creation.
This new "TEST_CREATE_REPO_NO_TEMPLATE" variable is a less
heavy-handed version of the "NO_SET_GIT_TEMPLATE_DIR" variable. See
a94d305bf8 (t/t0001-init.sh: add test for 'init with init.templatedir
set', 2010-02-26) for its implementation.
Unlike "TEST_CREATE_REPO_NO_TEMPLATE", this new
"TEST_CREATE_REPO_NO_TEMPLATE" variable is narrowly scoped to what the
"git init" in test-lib.sh does, as opposed to the global effect of
"NO_SET_GIT_TEMPLATE_DIR" and the setting of "GIT_TEMPLATE_DIR" in
wrap-for-bin.sh.
I experimented with adding a new "GIT_WRAP_FOR_BIN_VIA_TEST_LIB"
variable set in test-lib.sh, which would cause wrap-for-bin.sh to not
set GIT_TEMPLATE_DIR, GITPERLLIB etc, as we set those in
test-lib.sh. I think that's a viable approach, but it would interact
e.g. with the appending feature of GITPERLLIB added in
8bade1e12e (wrap-for-bin: make bin-wrappers chainable, 2013-07-04).
Doing so would allow us to convert the tests in t0001-init.sh that now
use "NO_SET_GIT_TEMPLATE_DIR" to simply unset "GIT_TEMPLATE_DIR" in a
sub-shell before invoking "git init" or "git clone". I think that
approach is worth pursuing, but let's table it for now. Some future
wrap-for-bin.sh refactoring can try to address it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bit of test framework fixes with a few fixes to issues found by
valgrind.
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
We used to call that function already before printing the final verdict.
However, now that we added grouping to the GitHub workflow output, we
will want to include even that part in the collapsible group for that
test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands exist to spruce up the output in GitHub workflows:
https://docs.github.com/en/actions/learn-github-actions/workflow-commands-for-github-actions
In addition to the `::group::<label>`/`::endgroup::` commands (which we
already use to structure the output of the build step better), we also
use `::error::`/`::notice::` to draw the attention to test failures and
to test cases that were expected to fail but didn't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code writing JUnit XML is interspersed directly with all the code in
`t/test-lib.sh`, and it is therefore not only ill-separated, but
introducing yet another output format would make the situation even
worse.
Let's introduce an abstraction layer by hiding the JUnit XML code behind
four new functions that are supposed to be called before and after each
test and test case.
This is not just an academic exercise, refactoring for refactoring's
sake. We _actually_ want to introduce such a new output format, to
make it substantially easier to diagnose test failures in our GitHub
workflow, therefore we do need this refactoring.
This commit is best viewed with `git show --color-moved
--color-moved-ws=allow-indentation-change <commit>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in b7d11a0f5d (tests: exercise the RUNTIME_PREFIX
feature, 2021-07-24) where tests that want to set up and test a "git"
wrapper in $PATH conflicted with the t/bin/valgrind wrapper(s) doing
the same.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid problems from interaction between malloc_check and address
sanitizer.
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
As the address sanitizer checks for a superset of the issues detected
by setting MALLOC_CHECK_ (which tries to detect things like double
frees and off-by-one errors) there is no need to set the latter when
compiling with -fsanitize=address.
This fixes a regression introduced by 131b94a10a ("test-lib.sh: Use
GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34", 2022-03-04)
which causes all the tests to fail with the message
ASan runtime does not come first in initial library list;
you should either link runtime to your application or
manually preload it with LD_PRELOAD.
when git is compiled with SANITIZE=address on systems with glibc >=
2.34. I have tested SANITIZE=leak and SANITIZE=undefined and they do
not suffer from this regression so the fix in this patch should be
sufficient.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Add the "feature: fsmonitor--daemon" message to the output of
`git version --build-options`.
The builtin FSMonitor is only available on certain platforms and
even then only when certain Makefile flags are enabled, so print
a message in the verbose version output when it is available.
This can be used by test scripts for prereq testing. Granted, tests
could just try `git fsmonitor--daemon status` and look for a 128 exit
code or grep for a "not supported" message on stderr, but these
methods are rather obscure.
The main advantage is that the feature message will automatically
appear in bug reports and other support requests.
This concept was also used during the development of Scalar for
similar reasons.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "--immediate" option so that it emits valid TAP on
failure. Before this it would omit the required plan at the end,
e.g. under SANITIZE=leak we'd show a "No plan found in TAP output"
error from "prove":
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.27 CPU)
Result: FAIL
Now we'll emit output that doesn't result in TAP parsing failures:
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.19 cusr 0.05 csys = 0.26 CPU)
Result: FAIL
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The method to trigger malloc check used in our tests no longer work
with newer versions of glibc.
* ep/test-malloc-check-with-glibc-2.34:
test-lib: declare local variables as local
test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on
glibc >= 2.34", 2022-03-04) introduced "local" variables without
declaring them as such. This conflicts with their use in some tests (at
least when running them with dash), leading to test failures in:
t0006-date.sh
t2002-checkout-cache-u.sh
t3430-rebase-merges.sh
t4138-apply-ws-expansion.sh
t4124-apply-ws-rule.sh
Declare those variables as local to let the tests pass again.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In glibc >= 2.34 MALLOC_CHECK_ and MALLOC_PERTURB_ environment
variables have been replaced by GLIBC_TUNABLES. Also the new
glibc requires that you preload a library called libc_malloc_debug.so
to get these features.
Using the ordinary glibc system variable detect if this is glibc >= 2.34 and
use GLIBC_TUNABLES and the new library.
This patch was inspired by a Richard W.M. Jones ndbkit patch
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "fast_unwind_on_malloc=0" to LSAN_OPTIONS to get more meaningful
stack traces from LSAN. This isn't required under ASAN which will emit
traces such as this one for a leak in "t/t0006-date.sh":
$ ASAN_OPTIONS=detect_leaks=1 ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x488b94 in strdup (t/helper/test-tool+0x488b94)
#1 0x9444a4 in xstrdup wrapper.c:29:14
#2 0x5995fa in parse_date_format date.c:991:24
#3 0x4d2056 in show_dates t/helper/test-date.c:39:2
#4 0x4d174a in cmd__date t/helper/test-date.c:116:3
#5 0x4cce89 in cmd_main t/helper/test-tool.c:127:11
#6 0x4cd1e3 in main common-main.c:52:11
#7 0x7fef3c695e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#8 0x422b09 in _start (t/helper/test-tool+0x422b09)
SUMMARY: AddressSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Whereas LSAN would emit this instead:
$ ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f2be1d614aa in strdup string/strdup.c:42:15
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Now we'll instead git this sensible stack trace under
LSAN. I.e. almost the same one (but starting with "malloc", as is
usual for LSAN) as under ASAN:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f012af5c4aa in strdup string/strdup.c:42:15
#2 0x5cb164 in xstrdup wrapper.c:29:14
#3 0x495ee9 in parse_date_format date.c:991:24
#4 0x453aac in show_dates t/helper/test-date.c:39:2
#5 0x453782 in cmd__date t/helper/test-date.c:116:3
#6 0x451d95 in cmd_main t/helper/test-tool.c:127:11
#7 0x451f1e in main common-main.c:52:11
#8 0x7f012aef5e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#9 0x42e0a9 in _start (t/helper/test-tool+0x42e0a9)
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
As the option name suggests this does make things slower, e.g. for
t0001-init.sh we're around 10% slower:
$ hyperfine -L v 0,1 'LSAN_OPTIONS=fast_unwind_on_malloc={v} make T=t0001-init.sh' -r 3
Benchmark 1: LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh
Time (mean ± σ): 2.135 s ± 0.015 s [User: 1.951 s, System: 0.554 s]
Range (min … max): 2.122 s … 2.152 s 3 runs
Benchmark 2: LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh
Time (mean ± σ): 1.981 s ± 0.055 s [User: 1.769 s, System: 0.488 s]
Range (min … max): 1.941 s … 2.044 s 3 runs
Summary
'LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh' ran
1.08 ± 0.03 times faster than 'LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh'
I think that's more than worth it to get the more meaningful stack
traces, we can always provide LSAN_OPTIONS=fast_unwind_on_malloc=0 for
one-off "fast" runs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a misleading comment added by me in 62f539043c (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c and
85176d7251 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
1. https://lore.kernel.org/git/220222.86o82z8als.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
LSAN_OPTIONS=report_objects=1:abort_on_error=0 ./t0006-date.sh
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and
85b81b35ff (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 subsystem can inherit certain information from parent
processes via environment variables; e.g., the parent command name and
session ID. This allows trace2 to note when a command is the child
process of another Git process, and to adjust various pieces of output
accordingly.
This behavior breaks certain tests that examine trace2 output when the
tests run as a child of another git process, such as in `git rebase -x
"make test"`.
While we could fix this by unsetting the relevant variables in the
affected tests (currently t0210, t0211, t0212, and t6421), this would
leave other tests vulnerable to similar breakage if new test cases are
added which inspect trace2 output. So fix this in general by unsetting
GIT_TRACE2_PARENT_NAME and GIT_TRACE2_PARENT_SID in test-lib.sh.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default setting for trace2 event nesting was too low to cause
test failures, which is worked around by bumping it up in the test
framework.
* ds/trace2-regions-in-tests:
t/t*: remove custom GIT_TRACE2_EVENT_NESTING
test-lib.sh: set GIT_TRACE2_EVENT_NESTING
The test framework learns to list unsatisfied test prerequisites,
and optionally error out when prerequisites that are expected to be
satisfied are not.
* fs/test-prereq:
test-lib: make BAIL_OUT() work in tests and prereq
test-lib: introduce required prereq for test runs
test-lib: show missing prereq summary
BAIL_OUT() is meant to abort the whole test run and print a message with
a standard prefix that can be parsed to stdout. Since for every test the
normal fd`s are redirected in test_eval_ this output would not be seen
when used within the context of a test or prereq like we do in
test_have_prereq(). To make this function work in these contexts we move
the setup of the fd aliases a few lines up before the first use of
BAIL_OUT() and then have this function always print to the alias.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
The GIT_TRACE2_EVENT feed has a limited nesting depth to avoid
overloading the feed when recursing into deep paths while adding more
nested regions.
Some tests use the GIT_TRACE2_EVENT feed to look for internal events,
ensuring that intended behavior is happening.
One such example is in t4216-log-bloom.sh which looks for a statistic
given as a trace2_data_intmax() call. This test started failing under
'-x' with 2ca245f8be (csum-file.h: increase hashfile buffer size,
2021-05-18) because the change in stderr triggered the progress API to
create an extra trace2 region, ejecting the statistic.
This change increases the value of GIT_TRACE2_EVENT_NESTING across the
entire test suite to avoid errors like this. Future changes will remove
custom assignments of GIT_TRACE2_EVENT_NESTING from some test scripts
that were aware of this limitation.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running the full test suite many tests can be skipped because of
missing prerequisites. It not easy right now to get an overview of which
ones are missing.
When switching to a new machine or environment some libraries and tools
might be missing or maybe a dependency broke completely. In this case
the tests would indicate nothing since all dependant tests are simply
skipped. This could hide broken behaviour or missing features in the
build. Therefore this patch summarizes the missing prereqs at the end of
the test run making it easier to spot such cases.
- Add failed prereqs to the test results.
- Aggregate and then show them with the totals.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tests that assume a 64-bit `size_t` to be skipped in 32-bit
platforms and regardless of the size of `long`.
This imitates the `LONG_IS_64BIT` prerequisite.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>