Now that we have support for a wide variety of types of authentication,
it's important to indicate to other credential helpers whether they
should store credentials, since not every credential helper may
intuitively understand all possible values of the authtype field. Do so
with a boolean field called "ephemeral", to indicate whether the
credential is expected to be temporary.
For example, in HTTP Digest authentication, the Authorization header
value is based off a nonce. It isn't useful to store this value
for later use because reusing the credential long term will not result
in successful authentication due to the nonce necessarily differing.
An additional case is potentially short-lived credentials, which may
last only a few hours. It similarly wouldn't be helper for other
credential helpers to attempt to provide these much later.
We do still pass the value to "git credential store" or "git credential
erase", since it may be helpful to the original helper to know whether
the operation was successful.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We support the new credential and authtype fields, but we lack a way to
indicate to a credential helper that we'd like them to be used. Without
some sort of indication, the credential helper doesn't know if it should
try to provide us a username and password, or a pre-encoded credential.
For example, the helper might prefer a more restricted Bearer token if
pre-encoded credentials are possible, but might have to fall back to
more general username and password if not.
Let's provide a simple way to indicate whether Git (or, for that matter,
the helper) is capable of understanding the authtype and credential
fields. We send this capability when we generate a request, and the
other side may reply to indicate to us that it does, too.
For now, don't enable sending capabilities for the HTTP code. In a
future commit, we'll introduce appropriate handling for that code,
which requires more in-depth work.
The logic for determining whether a capability is supported may seem
complex, but it is not. At each stage, we emit the capability to the
following stage if all preceding stages have declared it. Thus, if the
caller to git credential fill didn't declare it, then we won't send it
to the helper, and if fill's caller did send but the helper doesn't
understand it, then we won't send it on in the response. If we're an
internal user, then we know about all capabilities and will request
them.
For "git credential approve" and "git credential reject", we set the
helper capability before calling the helper, since we assume that the
input we're getting from the external program comes from a previous call
to "git credential fill", and thus we'll invoke send a capability to the
helper if and only if we got one from the standard input, which is the
correct behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a local clone of a repository we end up either copying
or hardlinking the source repository into the target repository. This is
significantly more performant than if we were to use git-upload-pack(1)
and git-fetch-pack(1) to create the new repository and preserves both
disk space and compute time.
Unfortunately though, performing such a local clone of a repository that
is not owned by the current user is inherently unsafe:
- It is possible that source files get swapped out underneath us while
we are copying or hardlinking them. While we do perform some checks
here to assert that we hardlinked the expected file, they cannot
reliably thwart time-of-check-time-of-use (TOCTOU) style races. It
is thus possible for an adversary to make us copy or hardlink
unexpected files into the target directory.
Ideally, we would address this by starting to use openat(3P),
fstatat(3P) and friends. Due to platform compatibility with Windows
we cannot easily do that though. Furthermore, the scope of these
fixes would likely be quite broad and thus not fit for an embargoed
security release.
- Even if we handled TOCTOU-style races perfectly, hardlinking files
owned by a different user into the target repository is not a good
idea in general. It is possible for an adversary to rewrite those
files to contain whatever data they want even after the clone has
completed.
Address these issues by completely refusing local clones of a repository
that is not owned by the current user. This reuses our existing infra we
have in place via `ensure_valid_ownership()` and thus allows a user to
override the safety guard by adding the source repository path to the
"safe.directory" configuration.
This addresses CVE-2024-32020.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tests with LSan from time to time seem to emit harmless message
that makes our tests unnecessarily flakey; we work it around by
filtering the uninteresting output.
* jk/test-lsan-denoise-output:
test-lib: ignore uninteresting LSan output
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Test update.
* jk/httpd-test-updates:
t/lib-httpd: increase ssl key size to 2048 bits
t/lib-httpd: drop SSLMutex config
t/lib-httpd: bump required apache version to 2.4
t/lib-httpd: bump required apache version to 2.2
This is a backport onto the `maint-2.39` branch, to improve the CI
health of that branch.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
This is a backport onto the `maint-2.39` branch, starting to take care
of making that branch's CI builds healthy again.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
When I run the tests in leak-checking mode the same way our CI job does,
like:
make SANITIZE=leak \
GIT_TEST_PASSING_SANITIZE_LEAK=true \
GIT_TEST_SANITIZE_LEAK_LOG=true \
test
then LSan can racily produce useless entries in the log files that look
like this:
==git==3034393==Unable to get registers from thread 3034307.
I think they're mostly harmless based on the source here:
7e0a52e8e9/compiler-rt/lib/lsan/lsan_common.cpp (L414)
which reads:
PtraceRegistersStatus have_registers =
suspended_threads.GetRegistersAndSP(i, ®isters, &sp);
if (have_registers != REGISTERS_AVAILABLE) {
Report("Unable to get registers from thread %llu.\n", os_id);
// If unable to get SP, consider the entire stack to be reachable unless
// GetRegistersAndSP failed with ESRCH.
if (have_registers == REGISTERS_UNAVAILABLE_FATAL)
continue;
sp = stack_begin;
}
The program itself still runs fine and LSan doesn't cause us to abort.
But test-lib.sh looks for any non-empty LSan logs and marks the test as
a failure anyway, under the assumption that we simply missed the failing
exit code somehow.
I don't think I've ever seen this happen in the CI job, but running
locally using clang-14 on an 8-core machine, I can't seem to make it
through a full run of the test suite without having at least one
failure. And it's a different one every time (though they do seem to
often be related to packing tests, which makes sense, since that is one
of our biggest users of threaded code).
We can hack around this by only counting LSan log files that contain a
line that doesn't match our known-uninteresting pattern.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The strategy to compact multiple tables of reftables after many
operations accumulate many entries has been improved to avoid
accumulating too many tables uncollected.
* jt/reftable-geometric-compaction:
reftable/stack: use geometric table compaction
reftable/stack: add env to disable autocompaction
reftable/stack: expose option to disable auto-compaction
The codepaths that reach date_mode_from_type() have been updated to
pass "struct date_mode" by value to make them thread safe.
* rs/date-mode-pass-by-value:
date: make DATE_MODE thread-safe
The userdiff patterns for C# has been updated.
Acked-by: Johannes Sixt <j6t@kdbg.org>
cf. <c2154457-3f2f-496e-9b8b-c8ea7257027b@kdbg.org>
* sj/userdiff-c-sharp:
userdiff: better method/property matching for C#
Document and apply workaround for a buggy version of dash that
mishandles "local var=val" construct.
* jc/local-extern-shell-rules:
t1016: local VAR="VAL" fix
t0610: local VAR="VAL" fix
t: teach lint that RHS of 'local VAR=VAL' needs to be quoted
t: local VAR="VAL" (quote ${magic-reference})
t: local VAR="VAL" (quote command substitution)
t: local VAR="VAL" (quote positional parameters)
CodingGuidelines: quote assigned value in 'local var=$val'
CodingGuidelines: describe "export VAR=VAL" rule
When rerere handles a conflict with an unmatched opening conflict marker
in a file with other conflicts, it will fail create a preimage and also
fail allocate the status member of struct rerere_dir. Currently the
status member is allocated after the error handling. This will lead to a
SEGFAULT when the status member is accessed during cleanup of the failed
parse.
Additionally, in subsequent executions of rerere, after removing the
MERGE_RR.lock manually, rerere crashes for a similar reason. MERGE_RR
points to a conflict id that has no preimage, therefore the status
member is not allocated and a SEGFAULT happens when trying to check if a
preimage exists.
Solve this by making sure the status field is allocated correctly and add
tests to prevent the bug from reoccurring.
This does not fix the root cause, failing to parse stray conflict
markers, but I don't think we can do much better than recognizing it,
printing an error, and moving on gracefully.
Signed-off-by: Marcel Röthke <marcel@roethke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable that holds the value read from the core.excludefile
configuration variable used to leak, which has been corrected.
* jc/unleak-core-excludesfile:
config: do not leak excludes_file
The "shared repository" test in the t0610 reftable test failed
under restrictive umask setting (e.g. 007), which has been
corrected.
* ps/t0610-umask-fix:
t0610: execute git-pack-refs(1) with specified umask
t0610: make `--shared=` tests reusable
"git add -u <pathspec>" and "git commit [-i] <pathspec>" did not
diagnose a pathspec element that did not match any files in certain
situations, unlike "git add <pathspec>" did.
* gt/add-u-commit-i-pathspec-check:
builtin/add: error out when passing untracked path with -u
builtin/commit: error out when passing untracked path with -i
revision: optionally record matches with pathspec elements
Windows binary used to decide the use of unix-domain socket at
build time, but it learned to make the decision at runtime instead.
* ma/win32-unix-domain-socket:
Win32: detect unix socket support at runtime
In 0fea6b73f1 (Merge branch 'tb/multi-pack-verbatim-reuse', 2024-01-12)
we have introduced multi-pack verbatim reuse of objects. This series has
introduced a new BTMP chunk, which encodes information about bitmapped
objects in the multi-pack index. Starting with dab60934e3 (pack-bitmap:
pass `bitmapped_pack` struct to pack-reuse functions, 2023-12-14) we use
this information to figure out objects which we can reuse from each of
the packfiles.
One thing that we glossed over though is backwards compatibility with
repositories that do not yet have BTMP chunks in their multi-pack index.
In that case, `nth_bitmapped_pack()` would return an error, which causes
us to emit a warning followed by another error message. These warnings
are visible to users that fetch from a repository:
```
$ git fetch
...
remote: error: MIDX does not contain the BTMP chunk
remote: warning: unable to load pack: 'pack-f6bb7bd71d345ea9fe604b60cab9ba9ece54ffbe.idx', disabling pack-reuse
remote: Enumerating objects: 40, done.
remote: Counting objects: 100% (40/40), done.
remote: Compressing objects: 100% (39/39), done.
remote: Total 40 (delta 5), reused 0 (delta 0), pack-reused 0 (from 0)
...
```
While the fetch succeeds the user is left wondering what they did wrong.
Furthermore, as visible both from the warning and from the reuse stats,
pack-reuse is completely disabled in such repositories.
What is quite interesting is that this issue can even be triggered in
case `pack.allowPackReuse=single` is set, which is the default value.
One could have expected that in this case we fall back to the old logic,
which is to use the preferred packfile without consulting BTMP chunks at
all. But either we fail with the above error in case they are missing,
or we use the first pack in the multi-pack-index. The former case
disables pack-reuse altogether, whereas the latter case may result in
reusing objects from a suboptimal packfile.
Fix this issue by partially reverting the logic back to what we had
before this patch series landed. Namely, in the case where we have no
BTMP chunks or when `pack.allowPackReuse=single` are set, we use the
preferred pack instead of consulting the BTMP chunks.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NUL cannot appear in paths. Even disregarding filesystem path
limitations, the tree object format delimits with NUL, so such a path
cannot be encoded by Git.
When a quoted path is unquoted, it could possibly contain NUL from
"\000". Forbid it so it isn't truncated.
fast-import still has other issues with NUL, but those will be addressed
later.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply saying “C-style” string quoting is imprecise, as only a subset of
C escapes are supported. Document the exact escapes.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since filerename was added in f39a946a1f (Support wholesale
directory renames in fast-import, 2007-07-09) and filecopy in b6f3481bb4
(Teach fast-import to recursively copy files/directories, 2007-07-15),
both have produced an error when the destination path is empty. Later,
when support for targeting the root directory with an empty string was
added in 2794ad5244 (fast-import: Allow filemodify to set the root,
2010-10-10), this had the effect of allowing the quoted empty string
(`""`), but forbidding its unquoted variant (``). This seems to have
been intended as simple data validation for parsing two paths, rather
than a syntax restriction, because it was not extended to the other
operations.
All other occurrences of paths (in filemodify, filedelete, the source of
filecopy and filerename, and ls) allow both.
For most of this feature's lifetime, the documentation has not
prescribed the use of quoted empty strings. In e5959106d6
(Documentation/fast-import: put explanation of M 040000 <dataref> "" in
context, 2011-01-15), its documentation was changed from “`<path>` may
also be an empty string (`""`) to specify the root of the tree” to “The
root of the tree can be represented by an empty string as `<path>`”.
Thus, we should assume that some front-ends have depended on this
behavior.
Remove this restriction for the destination paths of filecopy and
filerename and change tests targeting the root to test `""` and ``.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Path parsing in fast-import is inconsistent and many unquoting errors
are suppressed or not checked.
<path> appears in the grammar in these places:
filemodify ::= 'M' SP <mode> (<dataref> | 'inline') SP <path> LF
filedelete ::= 'D' SP <path> LF
filecopy ::= 'C' SP <path> SP <path> LF
filerename ::= 'R' SP <path> SP <path> LF
ls ::= 'ls' SP <dataref> SP <path> LF
ls-commit ::= 'ls' SP <path> LF
and fast-import.c parses them in five different ways:
1. For filemodify and filedelete:
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes to the end of
the line (including any number of SP).
2. For filecopy (source) and filerename (source):
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes up to, but not
including, the next SP.
3. For filecopy (dest) and filerename (dest):
Like 1., but an unquoted empty string is forbidden.
4. For ls:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
5. For ls-commit:
Unquote <path> and report parse errors.
(It must start with `"` to disambiguate from ls.)
In the first three, any errors from trying to unquote a string are
suppressed, so a quoted string that contains invalid escapes would be
interpreted as literal bytes. For example, `"\xff"` would fail to
unquote (because hex escapes are not supported), and it would instead be
interpreted as the byte sequence '"', '\\', 'x', 'f', 'f', '"', which is
certainly not intended. Some front-ends erroneously use their language's
standard quoting routine instead of matching Git's, which could silently
introduce escapes that would be incorrectly parsed due to this and lead
to data corruption.
The documentation states “To use a source path that contains SP the path
must be quoted.”, so it is expected that some implementations depend on
spaces being allowed in paths in the final position. Thus we have two
documented ways to parse paths, so simplify the implementation to that.
Now we have:
1. `parse_path_eol` for filemodify, filedelete, filecopy (dest),
filerename (dest), ls, and ls-commit:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
2. `parse_path_space` for filecopy (source) and filerename (source):
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes up to, but not including, the
next SP. It must be followed by SP.
There remain two special cases: The dest <path> in filecopy and rename
cannot be an unquoted empty string (this will be addressed subsequently)
and <path> in ls-commit must be quoted to disambiguate it from ls.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t-prio-queue test has been cleaned up by using C99 compound
literals; this is meant to also serve as a weather-balloon to smoke
out folks with compilers who have trouble compiling code that uses
the feature.
* rs/t-prio-queue-cleanup:
t-prio-queue: simplify using compound literals
"git checkout/switch --detach foo", after switching to the detached
HEAD state, gave the tracking information for the 'foo' branch,
which was pointless.
Tested-by: M Hickford <mirth.hickford@gmail.com>
cf. <CAGJzqsmE9FDEBn=u3ge4LA3ha4fDbm4OWiuUbMaztwjELBd7ug@mail.gmail.com>
* jc/checkout-detach-wo-tracking-report:
checkout: omit "tracking" information on a detached HEAD
While the reftable format is a recent introduction in Git, JGit already
knows to read and write reftables since 2017. Given the complexity of
the format there is a very real risk of incompatibilities between those
two implementations, which is something that we really want to avoid.
Add some basic tests that verify that reftables written by Git and JGit
can be read by the respective other implementation. For now this test
suite is rather small, only covering basic functionality. But it serves
as a good starting point and can be extended over time.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of the Dash shell fail to parse `local var=val`
assignments in some cases when `val` is unquoted. Such failures can be
observed e.g. with Ubuntu 20.04 and older, which has a Dash version that
still has this bug.
Such an assignment has been introduced in t0610. The issue wasn't
detected for a while because this test used to only run when the
GIT_TEST_DEFAULT_REF_FORMAT environment variable was set to "reftable".
We have dropped that requirement now though, meaning that it runs
unconditionally, including on jobs which use such older versions of
Ubuntu.
We have worked around such issues in the past, e.g. in ebee5580ca
(parallel-checkout: avoid dash local bug in tests, 2021-06-06), by
quoting the `val` side. Apply the same fix to t0610.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t06xx exercise specific ref formats. Next to probing some
basic functionality, these tests also exercise other low-level details
specific to the format. Those tests are only executed though in case
`GIT_TEST_DEFAULT_REF_FORMAT` is set to the ref format of the respective
backend-under-test.
Ideally, we would run the full test matrix for ref formats such that our
complete test suite is executed with every supported format on every
supported platform. This is quite an expensive undertaking though, and
thus we only execute e.g. the "reftable" tests on macOS and Linux. As a
result, we basically have no test coverage for the "reftable" format at
all on other platforms like Windows.
Adapt these tests so that they override `GIT_TEST_DEFAULT_REF_FORMAT`,
which means that they'll always execute. This increases test coverage on
platforms that don't run the full test matrix, which at least gives us
some basic test coverage on those platforms for the "reftable" format.
This of course comes at the cost of running those tests multiple times
on platforms where we do run the full test matrix. But arguably, this is
a good thing because it will also cause us to e.g. run those tests with
the address sanitizer and other non-standard parameters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update, as a preparation to enhance "git update-ref --stdin".
* kn/clarify-update-ref-doc:
githooks: use {old,new}-oid instead of {old,new}-value
update-ref: use {old,new}-oid instead of {old,new}value
CST6CDT and the like are POSIX timezone, with no rule for transition.
And POSIX doesn't enforce how to interpret the rule if it's omitted.
Some libc (e.g. glibc) resorted back to IANA (formerly Olson) db rules
for those timezones. Some libc (e.g. FreeBSD) uses a fixed rule.
Other libc (e.g. musl) interpret that as no transition at all [1].
In addition, distributions (notoriously Debian-derived, which uses IANA
db for CST6CDT and the like) started to split "legacy" timezones
like CST6CDT, EST5EDT into `tzdata-legacy', which will not be installed
by default [2].
In those cases, t9604 will run into failure.
Let's switch to POSIX timezone with rules to change timezone.
1: http://mm.icann.org/pipermail/tz/2024-March/058751.html
2: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1043250
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test file assumes the "apply" backend is the default which is not
the case since 2ac0d6273f (rebase: change the default backend from "am"
to "merge", 2020-02-15). Make sure the "apply" backend is tested by
specifying it explicitly.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a helper function makes the tests shorter and avoids running "git
cat-file" upstream of a pipe.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform the setup in a dedicated test so the later tests can be run
independently. Also avoid running git upstream of a pipe and take
advantage of test_commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use advice_if_enabled() API to rewrite a simple pattern to
call advise() after checking advice_enabled().
* rj/use-adv-if-enabled:
add: use advise_if_enabled for ADVICE_ADD_EMBEDDED_REPO
add: use advise_if_enabled for ADVICE_ADD_EMPTY_PATHSPEC
add: use advise_if_enabled for ADVICE_ADD_IGNORED_FILE
"git pack-refs" learned the "--auto" option, which is a useful
addition to be triggered from "git gc --auto".
Acked-by: Karthik Nayak <karthik.188@gmail.com>
cf. <CAOLa=ZRAEA7rSUoYL0h-2qfEELdbPHbeGpgBJRqesyhHi9Q6WQ@mail.gmail.com>
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
The test script had an incomplete and ineffective attempt to avoid
clobbering the testing user's real crontab (and its equivalents),
which has been completed.
* es/test-cron-safety:
test-lib: fix non-functioning GIT_TEST_MAINT_SCHEDULER fallback
"git add -p" and other "interactive hunk selection" UI has learned to
skip showing the hunk immediately after it has already been shown, and
an additional action to explicitly ask to reshow the current hunk.
* rj/add-p-explicit-reshow:
add-patch: do not print hunks repeatedly
add-patch: introduce 'p' in interactive-patch
Documentation rules has been explicitly described how to mark-up
literal parts and a few manual pages have been updated as examples.
* ja/doc-markup-updates:
doc: git-clone: do not autoreference the manpage in itself
doc: git-clone: apply new documentation formatting guidelines
doc: git-init: apply new documentation formatting guidelines
doc: allow literal and emphasis format in doc vs help tests
doc: rework CodingGuidelines with new formatting rules
The "hint:" messages given by the advice mechanism, when given a
message with a blank line, left a line with trailing whitespace,
which has been cleansed.
* jc/advice-sans-trailing-whitespace:
advice: omit trailing whitespace
"git apply" failed to extract the filename the patch applied to,
when the change was about an empty file created in or deleted from
a directory whose name ends with a SP, which has been corrected.
* jc/apply-parse-diff-git-header-names-fix:
t4126: fix "funny directory name" test on Windows (again)
t4126: make sure a directory with SP at the end is usable
apply: parse names out of "diff --git" more carefully
The tests for git-pack-refs(1) with the `core.sharedRepository` config
execute git-pack-refs(1) outside of the shell that has the expected
umask set. This is wrong because we want to test the behaviour of that
command with different umasks. The issue went unnoticed because most
distributions have a default umask of 0022, and we only ever test with
`--shared=true`, which re-adds the group write bit.
Fix the issue by moving git-pack-refs(1) into the umask'd shell and add
a bunch of test cases that exercise behaviour more thoroughly.
Note that we drop the check for whether `core.sharedRepository` was set
to the correct value to make the test setup a bit easier. We should be
able to rely on git-init(1) doing its thing correctly. Furthermore, to
help readability, we convert tests that pass `--shared=true` to instead
pass the equivalent `--shared=group`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two kinds of `--shared=` tests, one for git-init(1) and one for
git-pack-refs(1). Merge them into a reusable function such that we can
easily add additional testcases with different umasks and flags for the
`--shared=` switch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we have disabled name checks in the "reftable"
backend. These checks were responsible for verifying multiple things
when writing records to the reftable stack:
- Detecting file/directory conflicts. Starting with the preceding
commits this is now handled by the reftable backend itself via
`refs_verify_refname_available()`.
- Validating refnames. This is handled by `check_refname_format()` in
the generic ref transacton layer.
The code in the reftable library is thus not used anymore and likely to
bitrot over time. Remove it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already perform explicit D/F checks in all reftable callbacks which
write refs, except when writing symrefs. For one this leads to an error
message which isn't perfectly actionable because we only tell the user
that there was a D/F conflict, but not which refs conflicted with each
other. But second, once all ref updating callbacks explicitly check for
D/F conflicts, we can disable the D/F checks in the reftable library
itself and thus avoid some duplicated efforts.
Refactor the code that writes symref tables to explicitly call into
`refs_verify_refname_available()` when writing symrefs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `write_copy_table()` function is shared between the reftable
implementations for renaming and copying refs. The only difference
between those two cases is that the rename will also delete the old
reference, whereas copying won't.
This has resulted in a bug though where we don't properly verify refname
availability. When calling `refs_verify_refname_available()`, we always
add the old ref name to the list of refs to be skipped when computing
availability, which indicates that the name would be available even if
it already exists at the current point in time. This is only the right
thing to do for renames though, not for copies.
The consequence of this bug is quite harmless because the reftable
backend has its own checks for D/F conflicts further down in the call
stack, and thus we refuse the update regardless of the bug. But all the
user gets in this case is an uninformative message that copying the ref
has failed, without any further details.
Fix the bug and only add the old name to the skip-list in case we rename
the ref. Consequently, this error case will now be handled by
`refs_verify_refname_available()`, which knows to provide a proper error
message.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The excludes_file variable is marked "const char *", but all the
assignments to it are made with a piece of memory allocated just
for it, and the variable is responsible for owning it.
When "core.excludesfile" is read, the code just lost the previous
value, leaking memory. Plug it.
The real problem is that the variable is mistyped; our convention
is to never make a variable that owns the piece of memory pointed
by it as "const". Fixing that would reduce the chance of this kind
of bug happening, and also would make it unnecessary to cast the
constness away while free()ing it, but that would be a much larger
follow-up effort.
Reported-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reduce the number of on-disk reftables, compaction is performed.
Contiguous tables with the same binary log value of size are grouped
into segments. The segment that has both the lowest binary log value and
contains more than one table is set as the starting point when
identifying the compaction segment.
Since segments containing a single table are not initially considered
for compaction, if the table appended to the list does not match the
previous table log value, no compaction occurs for the new table. It is
therefore possible for unbounded growth of the table list. This can be
demonstrated by repeating the following sequence:
git branch -f foo
git branch -d foo
Each operation results in a new table being written with no compaction
occurring until a separate operation produces a table matching the
previous table log value.
Instead, to avoid unbounded growth of the table list, the compaction
strategy is updated to ensure tables follow a geometric sequence after
each operation by individually evaluating each table in reverse index
order. This strategy results in a much simpler and more robust algorithm
compared to the previous one while also maintaining a minimal ordered
set of tables on-disk.
When creating 10 thousand references, the new strategy has no
performance impact:
Benchmark 1: update-ref: create refs sequentially (revision = HEAD~)
Time (mean ± σ): 26.516 s ± 0.047 s [User: 17.864 s, System: 8.491 s]
Range (min … max): 26.447 s … 26.569 s 10 runs
Benchmark 2: update-ref: create refs sequentially (revision = HEAD)
Time (mean ± σ): 26.417 s ± 0.028 s [User: 17.738 s, System: 8.500 s]
Range (min … max): 26.366 s … 26.444 s 10 runs
Summary
update-ref: create refs sequentially (revision = HEAD) ran
1.00 ± 0.00 times faster than update-ref: create refs sequentially (revision = HEAD~)
Some tests in `t0610-reftable-basics.sh` assert the on-disk state of
tables and are therefore updated to specify the correct new table count.
Since compaction is more aggressive in ensuring tables maintain a
geometric sequence, the expected table count is reduced in these tests.
In `reftable/stack_test.c` tests related to `sizes_to_segments()` are
removed because the function is no longer needed. Also, the
`test_suggest_compaction_segment()` test is updated to better showcase
and reflect the new geometric compaction behavior.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In future tests it will be neccesary to create repositories with a set
number of tables. To make this easier, introduce the
`GIT_TEST_REFTABLE_AUTOCOMPACTION` environment variable that, when set
to false, disables autocompaction of reftables.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The series was based on maint and fixes all the tests that exist
there, but we have acquired a few more.
I suspect that the values assigned in many of these places are $IFS
safe, and this is primarily to squelch the linter than adding a
necessary workaround for buggy dash.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The series was based on maint and fixes all the tests that exist
there, but we have acquired a few more.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach t/check-non-portable-shell.pl that right hand side of the
assignment done with "local VAR=VAL" need to be quoted. We
deliberately target only VAL that begins with $ so that we can catch
- $variable_reference and positional parameter reference like $4
- $(command substitution)
- ${variable_reference-with_magic}
while excluding
- $'\n' that is a bash-ism freely usable in t990[23]
- $(( arithmetic )) whose result should be $IFS safe.
- $? that also is $IFS safe
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Future-proof test scripts that do
local VAR=VAL
without quoting VAL (which is OK in POSIX but broken in some shells)
that is ${magic-"reference to a parameter"}.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Future-proof test scripts that do
local VAR=VAL
without quoting VAL (which is OK in POSIX but broken in some shells)
that is a $(command substitution).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Future-proof test scripts that do
local VAR=VAL
without quoting VAL (which is OK in POSIX but broken in some shells)
that is a positional parameter, e.g. $4.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Support multi-line methods by not requiring closing parenthesis.
- Support multiple generics (comma was missing before).
- Add missing `foreach`, `lock` and `fixed` keywords to skip over.
- Remove `instanceof` keyword, which isn't C#.
- Also detect non-method keywords not positioned at the start of a line.
- Added tests; none existed before.
The overall strategy is to focus more on what isn't expected for
method/property definitions, instead of what is, but is fully optional.
Signed-off-by: Steven Jeuris <steven.jeuris@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
date_mode_from_type() modifies a static variable and returns a pointer
to it. This is not thread-safe. Most callers of date_mode_from_type()
use it via the macro DATE_MODE and pass its result on to functions like
show_date(), which take a const pointer and don't modify the struct.
Avoid the static storage by putting the variable on the stack and
returning the whole struct date_mode. Change functions that take a
constant pointer to expect the whole struct instead.
Reduce the cost of passing struct date_mode around on 64-bit systems
by reordering its members to close the hole between the 32-bit wide
.type and the 64-bit aligned .strftime_fmt as well as the alignment
hole at the end. sizeof reports 24 before and 16 with this change
on x64. Keep .type at the top to still allow initialization without
designator -- though that's only done in a single location, in
builtin/blame.c.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.commentChar used to be limited to a single byte, but has been
updated to allow an arbitrary multi-byte sequence.
* jk/core-comment-string:
config: add core.commentString
config: allow multi-byte core.commentChar
environment: drop comment_line_char compatibility macro
wt-status: drop custom comment-char stringification
sequencer: handle multi-byte comment characters when writing todo list
find multi-byte comment chars in unterminated buffers
find multi-byte comment chars in NUL-terminated strings
prefer comment_line_str to comment_line_char for printing
strbuf: accept a comment string for strbuf_add_commented_lines()
strbuf: accept a comment string for strbuf_commented_addf()
strbuf: accept a comment string for strbuf_stripspace()
environment: store comment_line_char as a string
strbuf: avoid shadowing global comment_line_char name
commit: refactor base-case of adjust_comment_line_char()
strbuf: avoid static variables in strbuf_add_commented_lines()
strbuf: simplify comment-handling in add_lines() helper
config: forbid newline as core.commentChar
"git config" learned "--comment=<message>" option to leave a
comment immediately after the "variable = value" on the same line
in the configuration file.
* rs/config-comment:
config: allow tweaking whitespace between value and comment
config: fix --comment formatting
config: add --comment option to add a comment
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
When passing untracked path with -u option, it silently succeeds.
There is no error message and the exit code is zero. This is
inconsistent with other instances of git commands where the expected
argument is a known path. In those other instances, we error out when
the path is not known.
Fix this by passing a character array to add_files_to_cache() to
collect the pathspec matching information and report the error if a
pathspec does not match any cache entry. Also add a testcase to cover
this scenario.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we provide a pathspec which does not match any tracked path
alongside --include, we do not error like without --include. If there
is something staged, it will commit the staged changes and ignore the
pathspec which does not match any tracked path. And if nothing is
staged, it will print the status. Exit code is 0 in both cases (unlike
without --include). This is also described in the TODO comment before
the relevant testcase.
Fix this by passing a character array to add_files_to_cache() to
collect the pathspec matching information and error out if the given
path is untracked. Also, amend the testcase to check for the error
message and remove the TODO comment.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows 10 build 17063 introduced support for unix sockets to Windows.
bb390b1 (git-compat-util: include declaration for unix sockets in
windows, 2021-09-14) introduced a way to build git with unix socket
support on Windows, but you still had to decide at build time which
Windows version the compiled executable was supposed to run on.
We can detect at runtime wether the operating system supports unix
sockets and act accordingly for all supported Windows versions.
This fixes https://github.com/git-for-windows/git/issues/3892
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow git-cherry-pick(1) to automatically drop redundant commits via
a new `--empty` option, similar to the `--empty` options for
git-rebase(1) and git-am(1). Includes a soft deprecation of
`--keep-redundant-commits` as well as some related docs changes and
sequencer code cleanup.
* bl/cherry-pick-empty:
cherry-pick: add `--empty` for more robust redundant commit handling
cherry-pick: enforce `--keep-redundant-commits` incompatibility
sequencer: do not require `allow_empty` for redundant commit options
sequencer: handle unborn branch with `--allow-empty`
rebase: update `--empty=ask` to `--empty=stop`
docs: clean up `--empty` formatting in git-rebase(1) and git-am(1)
docs: address inaccurate `--empty` default with `--exec`
The "--pretty=<shortHand>" option of the commands in the "git log"
family, defined as "[pretty] shortHand = <expansion>" should have
been looked up case insensitively, but was not, which has been
corrected.
* bl/pretty-shorthand-config-fix:
pretty: find pretty formats case-insensitively
pretty: update tests to use `test_config`
The t/README file now gives a hint on running individual tests in
the "t/" directory with "make t<num>-*.sh t<num>-*.sh".
* pb/test-scripts-are-build-targets:
t/README: mention test files are make targets
The implementation and documentation of "object-format" option
exchange between the Git itself and its remote helpers did not
quite match, which has been corrected.
* jk/remote-helper-object-format-option-fix:
transport-helper: send "true" value for object-format option
transport-helper: drop "object-format <algo>" option
transport-helper: use write helpers more consistently
There are a handful of related test breakages which are found when
running t/t7700-repack.sh with GIT_TEST_MULTI_PACK_INDEX set to "1" in
your environment.
Both test failures are the result of something like:
git repack --write-midx --write-bitmap-index [...] &&
test_path_is_file $midx &&
test_path_is_file $midx-$(midx_checksum $objdir).bitmap
, where we repack instructing Git to write a new MIDX and corresponding
MIDX bitamp.
The error occurs when GIT_TEST_MULTI_PACK_INDEX=1 is found in the
enviornment. This causes Git to write out a second MIDX (after
processing the builtin's `--write-midx` argument) which is identical to
the first, but does not request a bitmap (since we did not set the
GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP variable in the environment).
Since c528e17966 (pack-bitmap: write multi-pack bitmaps, 2021-08-31),
the MIDX machinery will drop an existing MIDX bitmap when rewriting an
identical MIDX which does not itself request a corresponding bitmap,
which is similar to the way repack itself behaves in the pack-bitmap
case.
Correct these issues (which date back to [1] and [2], respectively) by
explicitly setting GIT_TEST_MULTI_PACK_INDEX to zero before running each
command.
In the future, we should consider removing GIT_TEST_MULTI_PACK_INDEX,
and in general clean up unused GIT_TEST_-variables. But that is a larger
effort, and this ensures that we can cleanly run:
$ GIT_TEST_MULTI_PACK_INDEX=1 make test
in the meantime.
[1]: 324efc90d1 (builtin/repack.c: pass `--refs-snapshot` when writing
bitmaps, 2021-10-01)
[2]: 197443e80a (repack: don't remove .keep packs with
`--pack-kept-objects`, 2022-10-17).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test names like "basic" are mentioned seven times in the code (ignoring
case): Twice when defining the input and result macros, thrice when
defining the test function, and twice again when calling it. Reduce
that to a single time by using compound literals to pass the input and
result arrays via TEST_INPUT to test_prio_queue().
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use tabs to indent, not two or four spaces.
These days, even the test fixture preparation should be done inside
test_expect_success block.
Address these two style violations in this test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git-update-ref` command is used to modify references. The usage of
{old,new}value in the documentation refers to the OIDs. This is fine
since the command only works with regular references which hold OIDs.
But if the command is updated to support symrefs, we'd also be dealing
with {old,new}-refs.
To improve clarity around what exactly {old,new}value mean, let's rename
it to {old,new}-oid.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An additional test to demonstrate that clone would not choke on a
global configuration file that uses includeIf.onbranch:*.path.
* ps/clone-with-includeif-onbranch:
t5601: exercise clones with "includeIf.*.onbranch"
Fix the way recently added tests interpolate variables defined
outside them, and document the best practice to help future
developers.
* ps/t7800-variable-interpolation-fix:
t/README: document how to loop around test cases
t7800: use single quotes for test bodies
t7800: improve test descriptions with empty arguments
Hints that suggest what to do after resolving conflicts can now be
squelched by disabling advice.mergeConflict.
Acked-by: Phillip Wood <phillip.wood123@gmail.com>
cf. <e040c631-42d9-4501-a7b8-046f8dac6309@gmail.com>
* pb/advice-merge-conflict:
builtin/am: allow disabling conflict advice
sequencer: allow disabling conflict advice
"git config" corrupted literal HT characters written in the
configuration file as part of a value, which has been corrected.
* ds/config-internal-whitespace-fix:
config.txt: describe handling of whitespace further
t1300: add more tests for whitespace and inline comments
config: really keep value-internal whitespace verbatim
config: minor addition of whitespace
"git checkout --conflict=bad" reported a bad conflictStyle as if it
were given to a configuration variable; it has been corrected to
report that the command line option is bad.
* pw/checkout-conflict-errorfix:
checkout: fix interaction between --conflict and --merge
checkout: cleanup --conflict=<style> parsing
merge options: add a conflict style member
merge-ll: introduce LL_MERGE_OPTIONS_INIT
xdiff-interface: refactor parsing of merge.conflictstyle
When environment variable GIT_TEST_MAINT_SCHEDULER is set, `git
maintenance` invokes the command specified as the variable's value
rather than invoking the actual underlying platform-specific scheduler
management command. By setting GIT_TEST_MAINT_SCHEDULER to some suitable
value, test authors can therefore validate behavior of "destructive"
`git maintenance` commands without having to worry about clobbering the
user's own local scheduler configuration.
In order to protect an absent-minded test author from forgetting to set
GIT_TEST_MAINT_SCHEDULER in the local test script (and thus clobbering
his or her own scheduler configuration), t/test-lib.sh assigns an
"immediately error-out" value to GIT_TEST_MAINT_SCHEDULER by default
which should ensure that the problem will be caught and reported before
any damage can be done to the configuration of the person running the
tests.
Unfortunately, however, t/test-lib.sh neglects to export
GIT_TEST_MAINT_SCHEDULER, which renders the default "error-out"
assignment worthless. Fix this by exporting the variable as
originally intended.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-of-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By following a similar reasoning as in previous commits, there are no
reason why we should not use the advise_if_enabled() API to display the
ADVICE_ADD_EMBEDDED_REPO advice.
This advice was introduced in 532139940c (add: warn when adding an
embedded repository, 2017-06-14). Some tests were included in the
commit, but none is testing this advice. Which, note, we only want to
display once per run.
So, use the advise_if_enabled() machinery to show the
ADVICE_ADD_EMBEDDED_REPO advice and include a test to notice any
possible breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 93b0d86aaf (git-add: error out when given no arguments.,
2006-12-20) we display a message when no arguments are given to "git
add".
Part of that message was converted to advice in bf66db37f1 (add: use
advise function to display hints, 2020-01-07).
Following the same line of reasoning as in the previous commit, it is
sensible to use advise_if_enabled() here.
Therefore, use advise_if_enabled() in builtin/add.c to show the
ADVICE_ADD_EMPTY_PATHSPEC advice, and don't bother checking there the
visibility of the advice or displaying the instruction on how to disable
it.
Also add a test for these messages, in order to detect a possible
change in them.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b3b18d1621 (advice: revamp advise API, 2020-03-02), we can use
advise_if_enabled() to display an advice. This API encapsulates three
actions:
1.- checking the visibility of the advice
2.- displaying the advice when appropriate
3.- displaying instructions on how to disable the advice, when
appropriate
The code we have in builtin/add.c to display the ADVICE_ADD_IGNORED_FILE
advice, is doing these three things. However, the instructions
displayed on how to disable the hint are not shown in the normalized way
that advise_if_enabled() introduced. This may cause distraction.
There is no reason not to use the new API here. On the contrary, by
using it we gain simplicity in the code and avoid possible distractions.
For these reasons, use the newer advise_if_enabled() machinery to show
the ADVICE_ADD_IGNORED_FILE advice, and don't bother checking the
visibility or displaying the instruction on how to disable the advice.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By definition, a detached HEAD state is tentative and there is no
configured "upstream" that it always wants to integrate with. But
if you detach from a branch that is behind its upstream, e.g.,
$ git checkout -t -b main origin/main
$ git checkout main
$ git reset --hard HEAD^
$ git checkout --detach main
you'd see "you are behind your upstream origin/main". This does not
happen when you replace the last step in the above with any of these
$ git checkout HEAD^0
$ git checkout --detach HEAD
$ git checkout --detach origin/main
Before 32669671 (checkout: introduce --detach synonym for "git
checkout foo^{commit}", 2011-02-08) introduced the "--detach"
option, the rule to decide if we show the tracking information
used to be:
If --quiet is not given, and if the given branch name is a real
local branch (i.e. the one we can compute the file path under
.git/, like 'refs/heads/master' or "HEAD" which stand for the
name of the current branch", then give the tracking information.
to exclude things like "git checkout master^0" (which was the
official way to detach HEAD at the commit before that commit) and
"git checkout origin/master^0" from showing tracking information,
but still do show the tracking information for the current branch
for "git checkout HEAD". The introduction of an explicit option
"--detach" broke this subtley. The new rule should have been
If --quiet is given, do not bother with tracking info.
If --detach is given, do not bother with tracking info.
Otherwise, if we know that the branch name given is a real local
branch, or if we were given "HEAD" and "HEAD" is not detached,
then attempt to show the tracking info.
but it allowed "git checkout --detach master" to also show the
tracking info by mistake. Let's tighten the rule to fix this.
Reported-by: mirth hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git tools all consistently encourage users to avoid whitespaces at
the end of line by giving them features like "git diff --check" and
"git am --whitespace=fix". Make sure that the advice messages we
give users avoid trailing whitespaces. We shouldn't be wasting
vertical screen real estate by adding blank lines in advice messages
that are supposed to be concise hints, but as long as we write such
blank line in our "hints", we should do it right.
A test that expects the current behaviour of leaving trailing
whitespaces has been adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the new formatting of literal and placeholders is introduced,
the synopsis in the man pages can now hold additional markup with
respect to the command help.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git update-index --cacheinfo" ought to be filesystem
agnostic,
$ git update-index --add --cacheinfo "100644,$empty_blob,funny /empty"
fails only on Windows, and this unfortunately makes the approach of
the previous step unworkable.
Resurrect the earlier approach to give up on running the test on
known-bad platforms. Instead of computing a custom prerequisite,
just use !MINGW we have used elsewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shortly we're going make interactive-patch stop printing automatically
the hunk under certain circumstances.
Let's introduce a new option to allow the user to explicitly request
the printing.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As afb31ad9 (t1010: fix unnoticed failure on Windows, 2021-12-11)
said:
On Microsoft Windows, a directory name should never end with a period.
Quoting from Microsoft documentation[1]:
Do not end a file or directory name with a space or a period.
Although the underlying file system may support such names, the
Windows shell and user interface does not.
[1]: https://docs.microsoft.com/en-us/windows/win32/fileio/naming-a-file
and the condition addressed by this change is exactly that. If the
platform is unable to properly create these sample patches about a
file that lives in a directory whose name ends with a SP, there is
no point testing how "git apply" behaves there on the filesystem.
Even though the ultimate purpose of "git apply" is to apply a patch
and to update the filesystem entities, this particular test is
mainly about parsing a patch on a funny pathname correctly, and even
on a system that is incapable of checking out the resulting state
correctly on its filesystem, at least the parsing can and should work
fine. Rewrite the test to work inside the index without touching the
filesystem.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The status.showUntrackedFiles configuration variable had a name
that tempts users to set a Boolean value expressed in our usual
"false", "off", and "0", but it only took "no". This has been
corrected so "true" and its synonyms are taken as "normal", while
"false" and its synonyms are taken as "no".
* jc/show-untracked-false:
status: allow --untracked=false and friends
status: unify parsing of --untracked= and status.showUntrackedFiles
"git diff" and friends learned two extra configuration variables,
diff.srcPrefix and diff.dstPrefix.
* ph/diff-src-dst-prefix-config:
diff.*Prefix: use camelCase in the doc and test titles
diff: add diff.srcPrefix and diff.dstPrefix configuration variables
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
The core.commentChar code recently learned to accept more than a
single ASCII character. But using it is annoying with multiple versions
of Git, since older ones will reject it outright:
$ git.v2.44.0 -c core.commentchar=foo stripspace -s
error: core.commentChar should only be one ASCII character
fatal: unable to parse 'core.commentchar' from command-line config
Let's add an alias core.commentString. That's arguably a better name
anyway, since we now can handle strings, and it makes it possible to
have a config that works reasonably with both old and new versions of
Git (see the example in the documentation).
This is strictly an alias, so there's not much point in adding duplicate
tests; I added a single one to t0030 that exercises the alias code.
Note also that the error messages for invalid values will now show the
variable the config parser handed us, and thus will be normalized to
lowercase (rather than camelcase). A few tests in t0030 are adjusted to
match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with git-rebase(1) and git-am(1), git-cherry-pick(1) can result in a
commit being made redundant if the content from the picked commit is
already present in the target history. However, git-cherry-pick(1) does
not have the same options available that git-rebase(1) and git-am(1) have.
There are three things that can be done with these redundant commits:
drop them, keep them, or have the cherry-pick stop and wait for the user
to take an action. git-rebase(1) has the `--empty` option added in commit
e98c4269c8 (rebase (interactive-backend): fix handling of commits that
become empty, 2020-02-15), which handles all three of these scenarios.
Similarly, git-am(1) got its own `--empty` in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09).
git-cherry-pick(1), on the other hand, only supports two of the three
possiblities: Keep the redundant commits via `--keep-redundant-commits`,
or have the cherry-pick fail by not specifying that option. There is no
way to automatically drop redundant commits.
In order to bring git-cherry-pick(1) more in-line with git-rebase(1) and
git-am(1), this commit adds an `--empty` option to git-cherry-pick(1). It
has the same three options (keep, drop, and stop), and largely behaves
the same. The notable difference is that for git-cherry-pick(1), the
default will be `stop`, which maintains the current behavior when the
option is not specified.
Like the existing `--keep-redundant-commits`, `--empty=keep` will imply
`--allow-empty`.
The `--keep-redundant-commits` option will be documented as a deprecated
synonym of `--empty=keep`, and will be supported for backwards
compatibility for the time being.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--keep-redundant-commits` was added in b27cfb0d8d
(git-cherry-pick: Add keep-redundant-commits option, 2012-04-20), it was
not marked as incompatible with the various operations needed to
continue or exit a cherry-pick (`--continue`, `--skip`, `--abort`, and
`--quit`).
Enforce this incompatibility via `verify_opt_compatible` like we do for
the other various options.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-cherry-pick(1) with `--allow-empty` while on an unborn
branch, an error is thrown. This is inconsistent with the same
cherry-pick when `--allow-empty` is not specified.
Detect unborn branches in `is_index_unchanged`. When on an unborn
branch, use the `empty_tree` as the tree to compare against.
Add a new test to cover this scenario. While modelled off of the
existing 'cherry-pick on unborn branch' test, some improvements can be
made:
- Use `git switch --orphan unborn` instead of `git checkout --orphan
unborn` to avoid the need for a separate `rm -rf *` call
- Avoid using `--quiet` in the `git diff` call to make debugging easier
in the event of a failure. Use simply `--exit-code` instead.
Make these improvements to the existing test as well as the new test.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-am(1) got its own `--empty` option in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09), `stop` was used
instead of `ask`. `stop` is a more accurate term for describing what
really happens, and consistency is good.
Update git-rebase(1) to also use `stop`, while keeping `ask` as a
deprecated synonym. Update the tests to primarily use `stop`, but also
ensure that `ask` is still allowed.
In a future commit, we'll be adding a new `--empty` option for
git-cherry-pick(1) as well, making the consistency even more relevant.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-rebase(1) indicates that using the `--exec`
option will use `--empty=drop`. This is inaccurate: when `--interactive`
is not explicitly provided, `--exec` results in `--empty=keep`
behaviors.
Correctly indicate the behavior of `--exec` using `--empty=keep` when
`--interactive` is not specified.
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User-defined pretty formats are stored in config, which is meant to use
case-insensitive matching for names as noted in config.txt's 'Syntax'
section:
All the other lines [...] are recognized as setting variables, in
the form 'name = value' [...]. The variable names are
case-insensitive, [...].
When a user specifies one of their format aliases with an uppercase in
it, however, it is not found.
$ git config pretty.testAlias %h
$ git config --list | grep pretty
pretty.testalias=%h
$ git log --format=testAlias -1
fatal: invalid --pretty format: testAlias
$ git log --format=testalias -1
3c2a3fdc38
This is true whether the name in the config file uses any uppercase
characters or not.
Use case-insensitive comparisons when identifying format aliases.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests use raw `git config` calls, which is an older style that can
cause config to bleed between tests if not manually unset. `test_config`
ensures that config is unset at the end of each test automatically.
`test_config` is chosen over `git -c` since `test_config` still ends up
calling `git config` which seems slightly more realistic to how pretty
formats would be defined normally.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 23fc63bf8f (make tests ignorable with "make -i", 2005-11-08), each
test file defines a target in the test Makefile, such that one can
invoke:
make *checkout*
to run all tests with 'checkout' in their filename. This is useful to
run a subset of tests when you have a good idea of what part of the code
is touched by the changes your are testing.
Document that in t/README to help new (or more seasoned) contributors
that might not be aware.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git maintenance run --auto`, then the various subtasks
will only run as needed. Thus, we for example end up only packing loose
objects if we hit a certain threshold.
Interestingly enough, the "pack-refs" task is actually _never_ executed
when the auto-flag is set because it does not have a condition at all.
As 41abfe15d9 (maintenance: add pack-refs task, 2021-02-09) mentions:
The 'auto_condition' function pointer is left NULL for now. We could
extend this in the future to have a condition check if pack-refs
should be run during 'git maintenance run --auto'.
It is not quite clear from that quote whether it is actually intended
that the task doesn't run at all in this mode. Also, no test was added
to verify this behaviour. Ultimately though, it feels quite surprising
that `git maintenance run --auto --task=pack-refs` would quietly never
do anything at all.
In any case, now that we do have the logic in place to let ref backends
decide whether or not to repack refs, it does make sense to wire it up
accordingly. With the "reftable" backend we will thus now perform
auto-compaction, which optimizes the refdb as needed.
But for the "files" backend we now unconditionally pack refs as it does
not yet know to handle the "auto" flag. Arguably, this can be seen as a
bug fix given that previously the task never did anything at all.
Eventually though we should amend the "files" backend to use some
heuristics for auto compaction, as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Forward the `--auto` flag to git-pack-refs(1) when it has been invoked
with this flag itself. This does not change anything for the "files"
backend, which will continue to eagerly pack refs. But it does ensure
that the "reftable" backend only compacts refs as required.
This change does not impact git-maintenance(1) because this command will
in fact never run the pack-refs task when run with `--auto`. This issue
will be addressed in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ".git/obects/17/" shard is somewhat special because it is used by
git-gc(1) to estimate how many objects there are by extrapolating the
number of objects in that shard, only. In t6500 we thus have a hard
coded set of data that, when written to the object database, result in
blobs starting with that prefix.
We are about to need such "17"-prefixed objects in another test suite.
Extract them into "t/oid-info/hash-info" so that they can be reused by
other tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling git-pack-refs(1) will unconditionally cause it to pack all
requested refs regardless of the current state of the ref database. For
example:
- With the "files" backend we will end up rewriting the complete
"packed-refs" file even if only a single ref would require
compaction.
- With the "reftable" backend we will end up always compacting all
tables into a single table.
This behaviour can be completely unnecessary depending on the backend
and is thus wasteful.
With the introduction of the `PACK_REFS_AUTO` flag in the preceding
commit we can improve this and let the backends decide for themselves
whether to pack refs in the first place. Expose this functionality via a
new "--auto" flag in git-pack-refs(1), which mirrors the same flag in
both git-gc(1) and git-maintenance(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper provides a "ref-store <store> pack-refs" wrapper that
more or less directly invokes `refs_pack_refs()`. This helper is only
used in a single test with the "PACK_REFS_PRUNE" and "PACK_REFS_ALL"
flags. Both of these flags can directly be accessed via git-pack-refs(1)
though via the `--all` and `--prune` flags, which makes the helper
superfluous.
Refactor the test to use git-pack-refs(1) instead of the test helper.
Drop the now-unused test helper command.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-pack-refs(1) fails in the reftable backend we end up printing
no error message at all, leaving the caller puzzled as to why compaction
has failed. Fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever we commit a new table to the reftable stack we will end up
invoking auto-compaction of the stack to keep the total number of tables
at bay. This auto-compaction may fail though in case at least one of the
tables which we are about to compact is locked. This is indicated by the
compaction function returning `REFTABLE_LOCK_ERROR`. We do not handle
this case though, and thus bubble that return value up the calling
chain, which will ultimately cause a failure.
Fix this bug by ignoring `REFTABLE_LOCK_ERROR`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the run_am() function, we set up a child_process struct to run
"git-am", allocating memory for its args and env strvecs. These are
normally cleaned up when we call run_command(). But if we encounter
certain errors, we exit the function early and try to clean up ourselves
by clearing the am.args field. This leaks the "env" strvec.
We should use child_process_clear() instead, which covers both. And more
importantly, it future proofs us against the struct ever growing more
allocated fields.
These are unlikely errors to happen in practice, so they don't actually
trigger the leak sanitizer in the tests. But we can add a new test which
does exercise one of the paths (and fails SANITIZE=leak without this
patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases it makes sense to loop around test cases so that we can
execute the same test with slightly different arguments. There are some
gotchas around quoting here though that are easy to miss and that may
lead to easy-to-miss errors and portability issues.
Document the proper way to do this in "t/README".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In eb84c8b6ce (git-difftool--helper: honor `--trust-exit-code` with
`--dir-diff`, 2024-02-20) we have started to loop around some of the
tests in t7800 so that they are reexecuted with slightly different
arguments. As part of that refactoring the quoting of test bodies was
changed from single quotes (') to double quotes (") so that the value of
the loop variable is accessible to the body.
As the test body is later on passed to eval this change was not required
though. Let's revert it back to use single quotes as usual in our tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests in t7800 are executed repeatedly in a loop with
different arguments. To distinguish these tests, the value of that
variable is rendered into the test title. But given that one of the
values is the empty string, it results in a somewhat awkward test name:
difftool ignores exit code
Improve this by printing "without options" in case the value is empty.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a handful of additional tests, to improve the coverage of the handling
of configuration file entries whose values contain internal whitespace,
leading and/or trailing whitespace, which may or may not be enclosed within
quotation marks, or which contain an additional inline comment.
At the same time, rework one already existing whitespace-related test a bit,
to ensure its consistency with the newly added tests. This change introduced
no functional changes to the already existing test.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output format for dates "iso-strict" has been tweaked to show
a time in the Zulu timezone with "Z" suffix, instead of "+00:00".
* bb/iso-strict-utc:
date: make "iso-strict" conforming for the UTC timezone
Users with safe.bareRepository=explicit can still work from within
$GIT_DIR of a seconary worktree (which resides at .git/worktrees/$name/)
of the primary worktree without explicitly specifying the $GIT_DIR
environment variable or the --git-dir=<path> option.
* jc/safe-implicit-bare:
setup: notice more types of implicit bare repositories
The code to find the effective end of log message can fall into an
endless loop, which has been corrected.
* fs/find-end-of-log-message-fix:
wt-status: don't find scissors line beyond buf len
The parse-options code that deals with abbreviated long option
names have been cleaned up.
Reviewed-by: Josh Steadmon <steadmon@google.com>
cf. <ZfDM5Or3EKw7Q9SA@google.com>
* rs/opt-parse-long-fixups:
parse-options: rearrange long_name matching code
parse-options: normalize arg and long_name before comparison
parse-options: detect ambiguous self-negation
parse-options: factor out register_abbrev() and struct parsed_option
parse-options: set arg of abbreviated option lazily
parse-options: recognize abbreviated negated option with arg
The documentation in gitremote-helpers.txt claims that after a helper
has advertised the "object-format" capability, Git may then send "option
object-format true" to indicate that it would like to hear which object
format the helper is using when it returns refs.
However, the code implementing this has always written just "option
object-format", without the extra "true" value. Nobody noticed in
practice or in the tests because the only two helpers we ship are:
- remote-curl, which quietly converts missing values into "true". This
goes all the way back to ef08ef9ea0 (remote-helpers: Support custom
transport options, 2009-10-30), despite the fact that I don't think
any other option has ever made use of it.
- remote-testgit in t5801 does insist on having a "true" value. But
since it sends the ":object-format" response regardless of whether
it thinks the caller asked for it (technically breaking protocol),
everything just works, albeit with an extra shell error:
.../git/t/t5801/git-remote-testgit: 150: test: =: unexpected operator
printed to stderr, which you can see running t5801 with --verbose.
(The problem is that $val is the empty string, and since we don't
double-quote it in "test $val = true", we invoke "test = true"
instead).
When the documentation and code do not match, it is often good to fix
the documentation rather than break compatibility. And in this case, we
have had the mis-match since 8b85ee4f47 (transport-helper: implement
object-format extensions, 2020-05-25). However, the sha256 feature was
listed as experimental until 8e42eb0e9a (doc: sha256 is no longer
experimental, 2023-07-31).
It's possible there are some third party helpers that tried to follow
the documentation, and are broken. Changing the code will fix them. It's
also possible that there are ones that follow the code and will be
broken if we change it. I suspect neither is the case given that no
helper authors have brought this up as an issue (I only noticed it
because I was running t5801 in verbose mode for other reasons and
wondered about the weird shell error). That, coupled with the relative
new-ness of sha256, makes me think nobody has really worked on helpers
for it yet, which gives us an opportunity to correct the code before too
much time passes.
And doing so has some value: it brings "object-format" in line with the
syntax of other options, making the protocol more consistent. It also
lets us use set_helper_option(), which has better error reporting.
Note that we don't really need to allow any other values like "false"
here. The point is for Git to tell the helper that it understands
":object-format" lines coming back as part of the ref listing. There's
no point in future versions saying "no, I don't understand that".
To make sure everything works as expected, we can improve the
remote-testgit helper from t5801 to send the ":object-format" line only
if the other side correctly asked for it (which modern Git will always
do). With that test change and without the matching code fix here, t5801
will fail when run with GIT_TEST_DEFAULT_HASH=sha256.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" uses the pathname parsed out of the "diff --git" header
to decide which path is being patched, but this is used only when
there is no other names available in the patch. When there is any
content change (like we can see in this patch, that modifies the
contents of "apply.c") or rename (which comes with "rename from" and
"rename to" extended diff headers), the names are available without
having to parse this header.
When we do need to parse this header, a special care needs to be
taken, as the name of a directory or a file can have a SP in it so
it is not like "find a space, and take everything before the space
and that is the preimage filename, everything after the space is the
postimage filename". We have a loop that stops at every SP on the
"diff --git a/dir/file b/dir/foo" line and see if that SP is the
right place that separates such a pair of names.
Unfortunately, this loop can terminate prematurely when a crafted
directory name ended with a SP. The next pathname component after
that SP (i.e. the beginning of the possible postimage filename) will
be a slash, and instead of rejecting that position as the valid
separation point between pre- and post-image filenames and keep
looping, we stopped processing right there.
The fix is simple. Instead of stopping and giving up, keep going on
when we see such a condition.
Reported-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some trace2 events that lacked def_param have learned to show it,
enriching the output.
Reviewed-by: Josh Steadmon <steadmon@google.com>
cf. <ZejkVOVQBZhLVfHW@google.com>
* jh/trace2-missing-def-param-fix:
trace2: emit 'def_param' set with 'cmd_name' event
trace2: avoid emitting 'def_param' set more than once
t0211: demonstrate missing 'def_param' events for certain commands
When 'git am' or 'git rebase --apply' encounter a conflict, they show a
message instructing the user how to continue the operation. This message
can't be disabled.
Use ADVICE_MERGE_CONFLICT introduced in the previous commit to allow
disabling it. Update the tests accordingly, as the advice output is now
on stderr instead of stdout. In t4150, redirect stdout to 'out' and
stderr to 'err', since this is less confusing. In t4254, as we are
testing a specific failure mode of 'git am', simply disable the advice.
Note that we are not testing that this advice is shown in 'git rebase'
for the apply backend since 2ac0d6273f (rebase: change the default
backend from "am" to "merge", 2020-02-15).
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow disabling the advice shown when a squencer operation results in a
merge conflict through a new config 'advice.mergeConflict', which is
named generically such that it can be used by other commands eventually.
Remove that final '\n' in the first hunk in sequencer.c to avoid an
otherwise empty 'hint: ' line before the line 'hint: Disable this
message with "git config advice.mergeConflict false"' which is
automatically added by 'advise_if_enabled'.
Note that we use 'advise_if_enabled' for each message in the second hunk
in sequencer.c, instead of using 'if (show_hints &&
advice_enabled(...)', because the former instructs the user how to
disable the advice, which is more user-friendly.
Update the tests accordingly. Note that the body of the second test in
t3507-cherry-pick-conflict.sh is enclosed in double quotes, so we must
escape them in the added line. Note that t5520-pull.sh, which checks
that we display the advice for 'git rebase' (via 'git pull --rebase')
does not have to be updated because it only greps for a specific line in
the advice message.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid reading past the end of the "result" array, which could otherwise
happen if the prio-queue were to yield more items than were put into it
due to an implementation bug, or if the array has not enough entries due
to a test bug.
Also check at the end whether all "result" entries were consumed, which
would not be the case if the prio-queue forgot some entries or the test
definition contained too many.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we get an unexpected result, the prio-queue unit test reports it like
this:
# check "result[j++] == show(get)" failed at t/unit-tests/t-prio-queue.c:43
# left: 5
# right: 1
# failed at result[] index 0
That last line repeats "failed" and "result" from the first line.
Shorten it to resemble a similar one in t-ctype and also remove the
incrementation from the first line to avoid possible distractions from
the message of which comparison went wrong where:
# check "result[j] == show(get)" failed at t/unit-tests/t-prio-queue.c:43
# left: 5
# right: 1
# j: 0
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added documentation for diff.srcPrefix and diff.dstPrefix with
their names properly camelCased, but the diff.noPrefix is listed
there in all lowercase. Also these configuration variables, both
existing ones and the {src,dst}Prefix we recently added, were
spelled in all lowercase in the tests in t4013.
Now we are done with the main change, clean these up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take care to redirect stdin, otherwise the output of wc would also contain
the file name.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extending the previous step, this allows the whitespace placed after
the value before the "# comment message" to be tweaked by tweaking
the preprocessing rule to:
* If the given comment string begins with one or more whitespace
characters followed by '#', it is passed intact.
* If the given comment string begins with '#', a Space is
prepended.
* Otherwise, " # " (Space, '#', Space) is prefixed.
* A string with LF in it cannot be used as a comment string.
Unlike the previous step, which unconditionally added a space after
the value before writing the "# comment string", because the above
preprocessing already gives a whitespace before the '#', the
resulting string is written immediately after copying the value.
And the sanity checking rule becomes
* comment string after the above massaging that comes into
git_config_set_multivar_in_file_gently() must
- begin with zero or more whitespace characters followed by '#'.
- not have a LF in it.
I personally think this is over-engineered, but since I thought
things through anyway, here it is in the patch form. The logic to
tweak end-user supplied comment string is encapsulated in a new
helper function, git_config_prepare_comment_string(), so if new
front-end callers would want to use the same massaging rules, it is
easily reused.
Unfortunately I do not think of a way to tweak the preprocessing
rules further to optionally allow having no blank after the value,
i.e. to produce
[section]
variable = value#comment
(which is a valid way to say section.variable=value, by the way)
without sacrificing the ergonomics for the more usual case, so this
time I really stop here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git adds comments itself (like "rebase -i" todo list and
"commit -e" log message editor), it always gives a comment
introducer "#" followed by a Space before the message, except for
the recently introduced "git config --comment", where the users are
forced to say " this is my comment" if they want to add their
comment in this usual format; otherwise their comment string will
end up without a space after the "#".
Make it more ergonomic, while keeping it possible to also use this
unusual style, by massaging the comment string at the UI layer with
a set of simple rules:
* If the given comment string begins with '#', it is passed intact.
* Otherwise, "# " is prefixed.
* A string with LF in it cannot be used as a comment string.
Right now there is only one "front-end" that accepts end-user
comment string and calls the underlying machinery to add or modify
configuration file with comments, but to make sure that the future
callers perform similar massaging as they see fit, add a sanity
check logic in git_config_set_multivar_in_file_gently(), which is
the single choke point in the codepaths that consumes the comment
string.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
