There is no need to show some UI messages on stderr, and yet doing so
may produce some undesirable results, such as messages appearing in an
unexpected order.
Let's use stdout for all UI messages, and adjusts the tests accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.44: (41 commits)
Git 2.44.1
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
...
zsh has a bug in which the keyword "continue" within an &&-chain is not
effective and the code following it is executed nonetheless.
Fortunately, this bug has been fixed upstream in 12e5db145 ("51608:
Don't execute commands after "continue &&"", 2023-03-29). However, zsh
releases very infrequently, so it is not present in a stable release
yet.
That, combined with the fact that almost all zsh users get their shell
from their OS vendor, means that it will likely be a long time before
this problem is fixed for most users. We have other workarounds in
place for FreeBSD ash and dash, so it shouldn't be too difficult to add
one here, either.
Replace the existing code with a test and if-block, which comes only at
the cost of an additional indentation, and leaves the code a little more
idiomatic anyway.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leakfix.
* rj/add-i-leak-fix:
add: plug a leak on interactive_add
add-patch: plug a leak handling the '/' command
add-interactive: plug a leak in get_untracked_files
apply: plug a leak in apply_data
Even 'symbolic-ref' is only completed when
GIT_COMPLETION_SHOW_ALL_COMMANDS=1 is set, it currently defaults to
completing file names, which is not very helpful. Add a simple
completion function which completes options and refs.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
maintenance stops on a missing repository, omitting the remaining
repositories that were scheduled for maintenance.
This is undesirable, as it should be a best effort type of operation.
It should still fail due to the missing repository, of course, but not
leave the non-missing repositories in unmaintained shapes.
Let's use `for-each-repo`'s shiny new `--keep-going` option that we just
introduced for that very purpose.
This change will be picked up when running `git maintenance start`,
which is run implicitly by `scalar reconfigure`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
the regularly scheduled maintenance stops if one repo in the middle of
the list was found to be missing.
This is undesirable, and points out a gap in the design of `git
for-each-repo`: We need a mode where that command does not stop on an
error, but continues to try running the specified command with the other
repositories.
Imitating the `--keep-going` option of GNU make, this commit teaches
`for-each-repo` the same trick: to continue with the operation on all
the remaining repositories in case there was a problem with one
repository, still setting the exit code to indicate an error occurred.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When .git/rr-cache/ rerere database gets corrupted or rerere is fed to
work on a file with conflicted hunks resolved incompletely, the rerere
machinery got confused and segfaulted, which has been corrected.
* mr/rerere-crash-fix:
rerere: fix crashes due to unmatched opening conflict markers
GIt 2.44 introduced a regression that makes the updated code to
barf in repositories with multi-pack index written by older
versions of Git, which has been corrected.
* ps/missing-btmp-fix:
pack-bitmap: gracefully handle missing BTMP chunks
The cvsimport tests required that the platform understands
traditional timezone notations like CST6CDT, which has been
updated to work on those systems as long as they understand
POSIX notation with explicit tz transition dates.
* dd/t9604-use-posix-timezones:
t9604: Fix test for musl libc and new Debian
The way "git fast-import" handles paths described in its input has
been tightened up and more clearly documented.
* ta/fast-import-parse-path-fix:
fast-import: make comments more precise
fast-import: forbid escaped NUL in paths
fast-import: document C-style escapes for paths
fast-import: improve documentation for path quoting
fast-import: remove dead strbuf
fast-import: allow unquoted empty path for root
fast-import: directly use strbufs for paths
fast-import: tighten path unquoting
In the previous step, the "--rfc" option of "format-patch" learned
to take an optional string value to prepend to the subject prefix,
so that --rfc=WIP can give "[WIP PATCH]".
There may be cases in which the extra string wants to come after the
subject prefix. Extend the mechanism to allow "--rfc=-(WIP)" [*] to
signal that the extra string is to be appended instead of getting
prepended, resulting in "[PATCH (WIP)]".
In the documentation, discourage (ab)using "--rfc=-RFC" to say
"[PATCH RFC]" just to be different, when "[RFC PATCH]" is the norm.
[Footnote]
* The syntax takes inspiration from Perl's open syntax that opens
pipes "open fh, '|-', 'cmd'", where the dash signals "the other
stuff comes here".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the "--rfc" option, we can tweak the "[PATCH]" (or whatever
string specified with the "--subject-prefix" option, instead of
"PATCH") that we prefix the title of the commit with into "[RFC
PATCH]", but some projects may want "[rfc PATCH]". Adding a new
option, e.g., "--rfc-lowercase", to support such need every time
somebody wants to use different strings would lead to insanity of
accumulating unbounded number of such options.
Allow an optional value specified for the option, so that users can
use "--rfc=rfc" (think of "--rfc" without value as a short-hand for
"--rfc=RFC") if they wanted to.
This can of course be (ab)used to make the prefix "[WIP PATCH]" by
passing "--rfc=WIP". Passing an empty string, i.e., "--rfc=", is
the same as "--no-rfc" to override an option given earlier on the
same command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a leak we have since 5a76aff1a6 (add: convert to use
parse_pathspec, 2013-07-14).
This leak can be triggered with:
$ git add -p anything
Fixing this leak allows us to mark as leak-free the following tests:
+ t3701-add-interactive.sh
+ t7514-commit-patch.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have an execution path in apply_data that leaks the local struct
image. Plug it.
This leak can be triggered with:
$ echo foo >file
$ git add file && git commit -m file
$ echo bar >file
$ git diff file >diff
$ sed s/foo/frotz/ <diff >baddiff
$ git apply --cached <baddiff
Fixing this leak allows us to mark as leak-free the following tests:
+ t2016-checkout-patch.sh
+ t4103-apply-binary.sh
+ t4104-apply-boundary.sh
+ t4113-apply-ending.sh
+ t4117-apply-reject.sh
+ t4123-apply-shrink.sh
+ t4252-am-options.sh
+ t4258-am-quoted-cr.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash --staged" errors out when given binary files, after saving the
stash.
This behaviour dates back to the addition of the feature in 41a28eb6c1
(stash: implement '--staged' option for 'push' and 'save', 2021-10-18).
Adding the "--binary" option of "diff-tree" fixes this. The "diff-tree" call
in stash_patch() also omits "--binary", but that is fine since binary files
cannot be selected interactively.
Helped-By: Jeff King <peff@peff.net>
Helped-By: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that allows the "--rfc" and "-k" options to be specified together
when "git format-patch" is executed, which was introduced in the commit
e0d7db7423 ("format-patch: --rfc honors what --subject-prefix sets").
Add a couple of additional tests to t4014, to cover additional cases of
the mutual exclusivity between different "git format-patch" options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.43: (40 commits)
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
...
* maint-2.42: (39 commits)
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
...
* maint-2.41: (38 commits)
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
...
* maint-2.40: (39 commits)
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
...
* maint-2.39: (38 commits)
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
fetch/clone: detect dubious ownership of local repositories
...
This topic addresses two CVEs:
- CVE-2024-32020:
Local clones may end up hardlinking files into the target repository's
object database when source and target repository reside on the same
disk. If the source repository is owned by a different user, then
those hardlinked files may be rewritten at any point in time by the
untrusted user.
- CVE-2024-32021:
When cloning a local source repository that contains symlinks via the
filesystem, Git may create hardlinks to arbitrary user-readable files
on the same filesystem as the target repository in the objects/
directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the wake of fixing a vulnerability where `git clone` mistakenly
followed a symbolic link that it had just written while checking out
files, writing into a gitdir, let's add some defense-in-depth by
teaching `git fsck` to report symbolic links stored in its trees that
point inside `.git/`.
Even though the Git project never made any promises about the exact
shape of the `.git/` directory's contents, there are likely repositories
out there containing symbolic links that point inside the gitdir. For
that reason, let's only report these as warnings, not as errors.
Security-conscious users are encouraged to configure
`fsck.symlinkPointsToGitDir = error`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Quite frequently, when vulnerabilities were found in Git's (quite
complex) clone machinery, a relatively common way to escalate the
severity was to trick Git into running a hook which is actually a script
that has just been laid on disk as part of that clone. This constitutes
a Remote Code Execution vulnerability, the highest severity observed in
Git's vulnerabilities so far.
Some previously-fixed vulnerabilities allowed malicious repositories to
be crafted such that Git would check out files not in the worktree, but
in, say, a submodule's `<git>/hooks/` directory.
A vulnerability that "merely" allows to modify the Git config would
allow a related attack vector, to manipulate Git into looking in the
worktree for hooks, e.g. redirecting the location where Git looks for
hooks, via setting `core.hooksPath` (which would be classified as
CWE-427: Uncontrolled Search Path Element and CWE-114: Process Control,
for more details see https://cwe.mitre.org/data/definitions/427.html and
https://cwe.mitre.org/data/definitions/114.html).
To prevent that attack vector, let's error out and complain loudly if an
active `core.hooksPath` configuration is seen in the repository-local
Git config during a `git clone`.
There is one caveat: This changes Git's behavior in a slightly
backwards-incompatible manner. While it is probably a rare scenario (if
it exists at all) to configure `core.hooksPath` via a config in the Git
templates, it _is_ conceivable that some valid setup requires this to
work. In the hopefully very unlikely case that a user runs into this,
there is an escape hatch: set the `GIT_CLONE_PROTECTION_ACTIVE=false`
environment variable. Obviously, this should be done only with utmost
caution.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The ability to configuring the template directory is a delicate feature:
It allows defining hooks that will be run e.g. during a `git clone`
operation, such as the `post-checkout` hook.
As such, it is of utmost importance that Git would not allow that config
setting to be changed during a `git clone` by mistake, allowing an
attacker a chance for a Remote Code Execution, allowing attackers to run
arbitrary code on unsuspecting users' machines.
As a defense-in-depth measure, to prevent minor vulnerabilities in the
`git clone` code from ballooning into higher-serverity attack vectors,
let's make this a protected setting just like `safe.directory` and
friends, i.e. ignore any `init.templateDir` entries from any local
config.
Note: This does not change the behavior of any recursive clone (modulo
bugs), as the local repository config is not even supposed to be written
while cloning the superproject, except in one scenario: If a config
template is configured that sets the template directory. This might be
done because `git clone --recurse-submodules --template=<directory>`
does not pass that template directory on to the submodules'
initialization.
Another scenario where this commit changes behavior is where
repositories are _not_ cloned recursively, and then some (intentional,
benign) automation configures the template directory to be used before
initializing the submodules.
So the caveat is that this could theoretically break existing processes.
In both scenarios, there is a way out, though: configuring the template
directory via the environment variable `GIT_TEMPLATE_DIR`.
This change in behavior is a trade-off between security and
backwards-compatibility that is struck in favor of security.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Critical security issues typically combine relatively common
vulnerabilities such as case confusion in file paths with other
weaknesses in order to raise the severity of the attack.
One such weakness that has haunted the Git project in many a
submodule-related CVE is that any hooks that are found are executed
during a clone operation. Examples are the `post-checkout` and
`fsmonitor` hooks.
However, Git's design calls for hooks to be disabled by default, as only
disabled example hooks are copied over from the templates in
`<prefix>/share/git-core/templates/`.
As a defense-in-depth measure, let's prevent those hooks from running.
Obviously, administrators can choose to drop enabled hooks into the
template directory, though, _and_ it is also possible to override
`core.hooksPath`, in which case the new check needs to be disabled.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the next commit, Git will learn to disallow hooks during `git clone`
operations _except_ when those hooks come from the templates (which are
inherently supposed to be trusted). To that end, we add a function to
compare the contents of two files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When rebasing with "--signoff" the commit created by "rebase --continue"
after resolving conflicts or editing a commit fails to add the
"Signed-off-by:" trailer. This happens because the message from the
original commit is reused instead of the one that would have been used
if the sequencer had not stopped for the user interaction. The correct
message is stored in ctx->message and so with a couple of exceptions
this is written to rebase_path_message() when stopping for user
interaction instead. The exceptions are (i) "fixup" and "squash"
commands where the file is written by error_failed_squash() and (ii)
"edit" commands that are fast-forwarded where the original message is
still reused. The latter is safe because "--signoff" will never
fast-forward.
Note this introduces a change in behavior as the message file now
contains conflict comments. This is safe because commit_staged_changes()
passes an explicit cleanup flag when not editing the message and when
the message is being edited it will be cleaned up automatically. This
means user now sees the same message comments in editor with "rebase
--continue" as they would if they ran "git commit" themselves before
continuing the rebase. It also matches the behavior of "git
cherry-pick", "git merge" etc. which all list the files with merge
conflicts.
The tests are extended to check that all commits made after continuing a
rebase have a "Signed-off-by:" trailer. Sadly there are a couple of
leaks in apply.c which I've not been able to track down that mean this
test file is no-longer leak free when testing "git rebase --apply
--signoff" with conflicts.
Reported-by: David Bimmler <david.bimmler@isovalent.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have dropped `the_index`, `initialize_the_repository()`
doesn't really do a lot anymore except for setting up the pointer for
`the_repository` and then calling `initialize_repository()`. The former
can be replaced by statically initializing the pointer though, which
basically makes this function moot.
Convert callers to instead call `initialize_repository(the_repository)`
and drop `initialize_thee_repository()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert test-helper tools to use `the_repository->index` instead of
`the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When recursively cloning a repository with submodules, we must ensure
that the submodules paths do not suddenly contain symbolic links that
would let Git write into unintended locations. We just plugged that
vulnerability, but let's add some more defense-in-depth.
Since we can only keep one item on disk if multiple index entries' paths
collide, we may just as well avoid keeping a symbolic link (because that
would allow attack vectors where Git follows those links by mistake).
Technically, we handle more situations than cloning submodules into
paths that were (partially) replaced by symbolic links. This provides
defense-in-depth in case someone finds a case-folding confusion
vulnerability in the future that does not even involve submodules.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The most critical vulnerabilities in Git lead to a Remote Code Execution
("RCE"), i.e. the ability for an attacker to have malicious code being
run as part of a Git operation that is not expected to run said code,
such has hooks delivered as part of a `git clone`.
A couple of parent commits ago, a bug was fixed that let Git be confused
by the presence of a path `a-` to mistakenly assume that a directory
`a/` can safely be created without removing an existing `a` that is a
symbolic link.
This bug did not represent an exploitable vulnerability on its
own; Let's make sure it stays that way.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Submodules are stored in subdirectories of their superproject. When
these subdirectories have been replaced with symlinks by a malicious
actor, all kinds of mayhem can be caused.
This _should_ not be possible, but many CVEs in the past showed that
_when_ possible, it allows attackers to slip in code that gets executed
during, say, a `git clone --recursive` operation.
Let's add some defense-in-depth to disallow submodule paths to have
anything except directories in them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When creating a submodule path, we must be careful not to follow
symbolic links. Otherwise we may follow a symbolic link pointing to
a gitdir (which are valid symbolic links!) e.g. while cloning.
On case-insensitive filesystems, however, we blindly replace a directory
that has been created as part of the `clone` operation with a symlink
when the path to the latter differs only in case from the former's path.
Let's simply avoid this situation by expecting not ever having to
overwrite any existing file/directory/symlink upon cloning. That way, we
won't even replace a directory that we just created.
This addresses CVE-2024-32002.
Reported-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it is expected to have several git dirs within the `.git/modules/`
tree, it is important that they do not interfere with each other. For
example, if one submodule was called "captain" and another submodule
"captain/hooks", their respective git dirs would clash, as they would be
located in `.git/modules/captain/` and `.git/modules/captain/hooks/`,
respectively, i.e. the latter's files could clash with the actual Git
hooks of the former.
To prevent these clashes, and in particular to prevent hooks from being
written and then executed as part of a recursive clone, we introduced
checks as part of the fix for CVE-2019-1387 in a8dee3ca61 (Disallow
dubiously-nested submodule git directories, 2019-10-01).
It is currently possible to bypass the check for clashing submodule
git dirs in two ways:
1. parallel cloning
2. checkout --recurse-submodules
Let's check not only before, but also after parallel cloning (and before
checking out the submodule), that the git dir is not clashing with
another one, otherwise fail. This addresses the parallel cloning issue.
As to the parallel checkout issue: It requires quite a few manual steps
to create clashing git dirs because Git itself would refuse to
initialize the inner one, as demonstrated by the test case.
Nevertheless, let's teach the recursive checkout (namely, the
`submodule_move_head()` function that is used by the recursive checkout)
to be careful to verify that it does not use a clashing git dir, and if
it does, disable it (by deleting the `HEAD` file so that subsequent Git
calls won't recognize it as a git dir anymore).
Note: The parallel cloning test case contains a `cat err` that proved to
be highly useful when analyzing the racy nature of the operation (the
operation can fail with three different error messages, depending on
timing), and was left on purpose to ease future debugging should the
need arise.
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Submodule operations must not follow symlinks in working tree, because
otherwise files might be written to unintended places, leading to
vulnerabilities.
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a bug in directory/file ("D/F") conflict checking optimization:
It assumes that such a conflict cannot happen if a newly added entry's
path is lexicgraphically "greater than" the last already-existing index
entry _and_ contains a directory separator that comes strictly after the
common prefix (`len > len_eq_offset`).
This assumption is incorrect, though: `a-` sorts _between_ `a` and
`a/b`, their common prefix is `a`, the slash comes after the common
prefix, and there is still a file/directory conflict.
Let's re-design this logic, taking these facts into consideration:
- It is impossible for a file to sort after another file with whose
directory it conflicts because the trailing NUL byte is always smaller
than any other character.
- Since there are quite a number of ASCII characters that sort before
the slash (e.g. `-`, `.`, the space character), looking at the last
already-existing index entry is not enough to determine whether there
is a D/F conflict when the first character different from the
existing last index entry's path is a slash.
If it is not a slash, there cannot be a file/directory conflict.
And if the existing index entry's first different character is a
slash, it also cannot be a file/directory conflict because the
optimization requires the newly-added entry's path to sort _after_ the
existing entry's, and the conflicting file's path would not.
So let's fall back to the regular binary search whenever the newly-added
item's path differs in a slash character. If it does not, and it sorts
after the last index entry, there is no D/F conflict and the new index
entry can be safely appended.
This fix also nicely simplifies the logic and makes it much easier to
reason about, while the impact on performance should be negligible:
After this fix, the optimization will be skipped only when index
entry's paths differ in a slash and a space, `!`, `"`, `#`, `$`,
`%`, `&`, `'`, | ( `)`, `*`, `+`, `,`, `-`, or `.`, which should
be a rare situation.
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The upload-pack command tries to avoid trusting the repository in which
it's run (e.g., by not running any hooks and not using any config that
contains arbitrary commands). But if the server side of a fetch or a
clone is a partial clone, then either upload-pack or its child
pack-objects may run a lazy "git fetch" under the hood. And it is very
easy to convince fetch to run arbitrary commands.
The "server" side can be a local repository owned by someone else, who
would be able to configure commands that are run during a clone with the
current user's permissions. This issue has been designated
CVE-2024-32004.
The fix in this commit's parent helps in this scenario, as well as in
related scenarios using SSH to clone, where the untrusted .git directory
is owned by a different user id. But if you received one as a zip file,
on a USB stick, etc, it may be owned by your user but still untrusted.
This has been designated CVE-2024-32465.
To mitigate the issue more completely, let's disable lazy fetching
entirely during `upload-pack`. While fetching from a partial repository
should be relatively rare, it is certainly not an unreasonable workflow.
And thus we need to provide an escape hatch.
This commit works by respecting a GIT_NO_LAZY_FETCH environment variable
(to skip the lazy-fetch), and setting it in upload-pack, but only when
the user has not already done so (which gives us the escape hatch).
The name of the variable is specifically chosen to match what has
already been added in 'master' via e6d5479e7a (git: extend
--no-lazy-fetch to work across subprocesses, 2024-02-27). Since we're
building this fix as a backport for older versions, we could cherry-pick
that patch and its earlier steps. However, we don't really need the
niceties (like a "--no-lazy-fetch" option) that it offers. By using the
same name, everything should just work when the two are eventually
merged, but here are a few notes:
- the blocking of the fetch in e6d5479e7a is incomplete! It sets
fetch_if_missing to 0 when we setup the repository variable, but
that isn't enough. pack-objects in particular will call
prefetch_to_pack() even if that variable is 0. This patch by
contrast checks the environment variable at the lowest level before
we call the lazy fetch, where we can be sure to catch all code
paths.
Possibly the setting of fetch_if_missing from e6d5479e7a can be
reverted, but it may be useful to have. For example, some code may
want to use that flag to change behavior before it gets to the point
of trying to start the fetch. At any rate, that's all outside the
scope of this patch.
- there's documentation for GIT_NO_LAZY_FETCH in e6d5479e7a. We can
live without that here, because for the most part the user shouldn't
need to set it themselves. The exception is if they do want to
override upload-pack's default, and that requires a separate
documentation section (which is added here)
- it would be nice to use the NO_LAZY_FETCH_ENVIRONMENT macro added by
e6d5479e7a, but those definitions have moved from cache.h to
environment.h between 2.39.3 and master. I just used the raw string
literals, and we can replace them with the macro once this topic is
merged to master.
At least with respect to CVE-2024-32004, this does render this commit's
parent commit somewhat redundant. However, it is worth retaining that
commit as defense in depth, and because it may help other issues (e.g.,
symlink/hardlink TOCTOU races, where zip files are not really an
interesting attack vector).
The tests in t0411 still pass, but now we have _two_ mechanisms ensuring
that the evil command is not run. Let's beef up the existing ones to
check that they failed for the expected reason, that we refused to run
upload-pack at all with an alternate user id. And add two new ones for
the same-user case that both the restriction and its escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When cloning from somebody else's repositories, it is possible that,
say, the `upload-pack` command is overridden in the repository that is
about to be cloned, which would then be run in the user's context who
started the clone.
To remind the user that this is a potentially unsafe operation, let's
extend the ownership checks we have already established for regular
gitdir discovery to extend also to local repositories that are about to
be cloned.
This protection extends also to file:// URLs.
The fixes in this commit address CVE-2024-32004.
Note: This commit does not touch the `fetch`/`clone` code directly, but
instead the function used implicitly by both: `enter_repo()`. This
function is also used by `git receive-pack` (i.e. pushes), by `git
upload-archive`, by `git daemon` and by `git http-backend`. In setups
that want to serve repositories owned by different users than the
account running the service, this will require `safe.*` settings to be
configured accordingly.
Also note: there are tiny time windows where a time-of-check-time-of-use
("TOCTOU") race is possible. The real solution to those would be to work
with `fstat()` and `openat()`. However, the latter function is not
available on Windows (and would have to be emulated with rather
expensive low-level `NtCreateFile()` calls), and the changes would be
quite extensive, for my taste too extensive for the little gain given
that embargoed releases need to pay extra attention to avoid introducing
inadvertent bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Cloning from a partial repository must not fetch missing objects into
the partial repository, because that can lead to arbitrary code
execution.
Add a couple of test cases, pretending to the `upload-pack` command (and
to that command only) that it is working on a repository owned by
someone else.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We observed a series of clone failures arose in a specific set of
repositories after we fully enabled the MIDX bitmap feature within our
Codebase service. These failures were accompanied with error messages
such as:
Cloning into bare repository 'clone.git'...
remote: Enumerating objects: 8, done.
remote: Total 8 (delta 0), reused 0 (delta 0), pack-reused 8 (from 1)
Receiving objects: 100% (8/8), done.
fatal: did not receive expected object ...
fatal: fetch-pack: invalid index-pack output
Temporarily disabling the MIDX feature eliminated the reported issues.
After some investigation we found that all repositories experiencing
failures contain replace references, which seem to be improperly
acknowledged by the MIDX bitmap generation logic.
A more thorough explanation about the root cause from Taylor Blau says:
Indeed, the pack-bitmap-write machinery does not itself call
disable_replace_refs(). So when it generates a reachability bitmap, it
is doing so with the replace refs in mind. You can see that this is
indeed the cause of the problem by looking at the output of an
instrumented version of Git that indicates what bits are being set
during the bitmap generation phase.
With replace refs (incorrectly) enabled, we get:
[2, 4, 6, 8, 13, 3, 6, 7, 3, 4, 6, 8]
and doing the same after calling disable_replace_refs(), we instead get:
[2, 5, 6, 13, 3, 6, 7, 3, 4, 6, 8]
Single pack bitmaps are unaffected by this issue because we generate
them from within pack-objects, which does call disable_replace_refs().
This patch updates the MIDX logic to disable replace objects within the
multi-pack-index builtin, and a test showing a clone (which would fail
with MIDX bitmap) is added to demonstrate the bug.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have full support in Git for the authtype capability, let's
add support to the cache credential helper.
When parsing data, we always set the initial capabilities because we're
the helper, and we need both the initial and helper capabilities to be
set in order to have the helper capabilities take effect.
When emitting data, always emit the supported capability and make sure
we emit items only if we have them and they're supported by the caller.
Since we may no longer have a username or password, be sure to emit
those conditionally as well so we don't segfault on a NULL pointer.
Similarly, when comparing credentials, consider both the password and
credential fields when we're matching passwords.
Adjust the partial credential detection code so that we can store
credentials missing a username or password as long as they have an
authtype and credential.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's helpful to have some basic tests for credential helpers supporting
the authtype and credential fields. Let's add some tests for this case
so that we can make sure newly supported helpers work correctly.
Note that we explicitly check that credential helpers can produce
different sets of authtype and credential values based on the username.
While the username is not used in the HTTP protocol with authtype and
credential, it can still be specified in the URL and thus may be part of
the protocol. Additionally, because it is common for users to have
multiple accounts on one service (say, both personal and professional
accounts), it's very helpful to be able to store different credentials
for different accounts in the same helper, and that doesn't become less
useful if one is using, say, Bearer authentication instead of Basic.
Thus, credential helpers should be expected to support this
functionality as basic functionality, so verify here that they do so.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over HTTP, NTLM and Kerberos require two rounds of authentication on the
client side. It's possible that there are custom authentication schemes
that also implement this same approach. Since these are tricky schemes
to implement and the HTTP library in use may not always handle them
gracefully on all systems, it would be helpful to allow the credential
helper to implement them instead for increased portability and
robustness.
To allow this to happen, add a boolean flag, continue, that indicates
that instead of failing when we get a 401, we should retry another round
of authentication. However, this necessitates some changes in our
current credential code so that we can make this work.
Keep the state[] headers between iterations, but only use them to send
to the helper and only consider the new ones we read from the credential
helper to be valid on subsequent iterations. That avoids us passing
stale data when we finally approve or reject the credential. Similarly,
clear the multistage and wwwauth[] values appropriately so that we
don't pass stale data or think we're trying a multiround response when
we're not. Remove the credential values so that we can actually fill a
second time with new responses.
Limit the number of iterations of reauthentication we do to 3. This
means that if there's a problem, we'll terminate with an error message
instead of retrying indefinitely and not informing the user (and
possibly conducting a DoS on the server).
In our tests, handle creating multiple response output files from our
helper so we can verify that each of the messages sent is correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some HTTP authentication schemes, such as NTLM- and Kerberos-based
options, require more than one round trip to authenticate. Currently,
these can only be supported in libcurl, since Git does not have support
for this in the credential helper protocol.
However, in a future commit, we'll add support for this functionality
into the credential helper protocol and Git itself. Because we don't
really want to implement either NTLM or Kerberos, both of which are
complex protocols, we'll want to test this using a fake credential
authentication scheme. In order to do so, update t5563 and its backend
to allow us to accept multiple sets of credentials and respond with
different behavior in each case.
Since we can now provide any number of possible status codes, provide a
non-specific reason phrase so we don't have to generate a more specific
one based on the response. The reason phrase is mandatory according to
the status-line production in RFC 7230, but clients SHOULD ignore it,
and curl does (except to print it).
Each entry in the authorization and challenge fields contains an ID,
which indicates a corresponding credential and response. If the
response is a 200 status, then we continue to execute git-http-backend.
Otherwise, we print the corresponding status and response. If no ID is
matched, we use the default response with a status of 401.
Note that there is an implicit order to the parameters. The ID is
always first and the creds or response value is always last, and
therefore may contain spaces, equals signs, or other arbitrary data.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've implemented the state capability, let's send it along by
default when filling credentials so we can make use of it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, our credential code has mostly deal with usernames and
passwords and we've let libcurl deal with the variant of authentication
to be used. However, now that we have the credential value, the
credential helper can take control of the authentication, so the value
provided might be something that's generated, such as a Digest hash
value.
In such a case, it would be helpful for a credential helper that gets an
erase or store command to be able to keep track of an identifier for the
original secret that went into the computation. Furthermore, some types
of authentication, such as NTLM and Kerberos, actually need two round
trips to authenticate, which will require that the credential helper
keep some state.
In order to allow for these use cases and others, allow storing state in
a field called "state[]". This value is passed back to the credential
helper that created it, which avoids confusion caused by parsing values
from different helpers.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have the credential helper code set up to handle arbitrary
authentications schemes, let's add support for this in the HTTP code,
where we really want to use it. If we're using this new functionality,
don't set a username and password, and instead set a header wherever
we'd normally do so, including for proxy authentication.
Since we can now handle this case, ask the credential helper to enable
the appropriate capabilities.
Finally, if we're using the authtype value, set "Expect: 100-continue".
Any type of authentication that requires multiple rounds (such as NTLM
or Kerberos) requires a 100 Continue (if we're larger than
http.postBuffer) because otherwise we send the pack data before we're
authenticated, the push gets a 401 response, and we can't rewind the
stream. We don't know for certain what other custom schemes might
require this, the HTTP/1.1 standard has required handling this since
1999, the broken HTTP server for which we disabled this (Google's) is
now fixed and has been for some time, and libcurl has a 1-second
fallback in case the HTTP server is still broken. In addition, it is
not unreasonable to require compliance with a 25-year old standard to
use new Git features. For all of these reasons, do so here.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have support for a wide variety of types of authentication,
it's important to indicate to other credential helpers whether they
should store credentials, since not every credential helper may
intuitively understand all possible values of the authtype field. Do so
with a boolean field called "ephemeral", to indicate whether the
credential is expected to be temporary.
For example, in HTTP Digest authentication, the Authorization header
value is based off a nonce. It isn't useful to store this value
for later use because reusing the credential long term will not result
in successful authentication due to the nonce necessarily differing.
An additional case is potentially short-lived credentials, which may
last only a few hours. It similarly wouldn't be helper for other
credential helpers to attempt to provide these much later.
We do still pass the value to "git credential store" or "git credential
erase", since it may be helpful to the original helper to know whether
the operation was successful.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We support the new credential and authtype fields, but we lack a way to
indicate to a credential helper that we'd like them to be used. Without
some sort of indication, the credential helper doesn't know if it should
try to provide us a username and password, or a pre-encoded credential.
For example, the helper might prefer a more restricted Bearer token if
pre-encoded credentials are possible, but might have to fall back to
more general username and password if not.
Let's provide a simple way to indicate whether Git (or, for that matter,
the helper) is capable of understanding the authtype and credential
fields. We send this capability when we generate a request, and the
other side may reply to indicate to us that it does, too.
For now, don't enable sending capabilities for the HTTP code. In a
future commit, we'll introduce appropriate handling for that code,
which requires more in-depth work.
The logic for determining whether a capability is supported may seem
complex, but it is not. At each stage, we emit the capability to the
following stage if all preceding stages have declared it. Thus, if the
caller to git credential fill didn't declare it, then we won't send it
to the helper, and if fill's caller did send but the helper doesn't
understand it, then we won't send it on in the response. If we're an
internal user, then we know about all capabilities and will request
them.
For "git credential approve" and "git credential reject", we set the
helper capability before calling the helper, since we assume that the
input we're getting from the external program comes from a previous call
to "git credential fill", and thus we'll invoke send a capability to the
helper if and only if we got one from the standard input, which is the
correct behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a local clone of a repository we end up either copying
or hardlinking the source repository into the target repository. This is
significantly more performant than if we were to use git-upload-pack(1)
and git-fetch-pack(1) to create the new repository and preserves both
disk space and compute time.
Unfortunately though, performing such a local clone of a repository that
is not owned by the current user is inherently unsafe:
- It is possible that source files get swapped out underneath us while
we are copying or hardlinking them. While we do perform some checks
here to assert that we hardlinked the expected file, they cannot
reliably thwart time-of-check-time-of-use (TOCTOU) style races. It
is thus possible for an adversary to make us copy or hardlink
unexpected files into the target directory.
Ideally, we would address this by starting to use openat(3P),
fstatat(3P) and friends. Due to platform compatibility with Windows
we cannot easily do that though. Furthermore, the scope of these
fixes would likely be quite broad and thus not fit for an embargoed
security release.
- Even if we handled TOCTOU-style races perfectly, hardlinking files
owned by a different user into the target repository is not a good
idea in general. It is possible for an adversary to rewrite those
files to contain whatever data they want even after the clone has
completed.
Address these issues by completely refusing local clones of a repository
that is not owned by the current user. This reuses our existing infra we
have in place via `ensure_valid_ownership()` and thus allows a user to
override the safety guard by adding the source repository path to the
"safe.directory" configuration.
This addresses CVE-2024-32020.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tests with LSan from time to time seem to emit harmless message
that makes our tests unnecessarily flakey; we work it around by
filtering the uninteresting output.
* jk/test-lsan-denoise-output:
test-lib: ignore uninteresting LSan output
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Test update.
* jk/httpd-test-updates:
t/lib-httpd: increase ssl key size to 2048 bits
t/lib-httpd: drop SSLMutex config
t/lib-httpd: bump required apache version to 2.4
t/lib-httpd: bump required apache version to 2.2
This is a backport onto the `maint-2.39` branch, to improve the CI
health of that branch.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
This is a backport onto the `maint-2.39` branch, starting to take care
of making that branch's CI builds healthy again.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
When I run the tests in leak-checking mode the same way our CI job does,
like:
make SANITIZE=leak \
GIT_TEST_PASSING_SANITIZE_LEAK=true \
GIT_TEST_SANITIZE_LEAK_LOG=true \
test
then LSan can racily produce useless entries in the log files that look
like this:
==git==3034393==Unable to get registers from thread 3034307.
I think they're mostly harmless based on the source here:
7e0a52e8e9/compiler-rt/lib/lsan/lsan_common.cpp (L414)
which reads:
PtraceRegistersStatus have_registers =
suspended_threads.GetRegistersAndSP(i, ®isters, &sp);
if (have_registers != REGISTERS_AVAILABLE) {
Report("Unable to get registers from thread %llu.\n", os_id);
// If unable to get SP, consider the entire stack to be reachable unless
// GetRegistersAndSP failed with ESRCH.
if (have_registers == REGISTERS_UNAVAILABLE_FATAL)
continue;
sp = stack_begin;
}
The program itself still runs fine and LSan doesn't cause us to abort.
But test-lib.sh looks for any non-empty LSan logs and marks the test as
a failure anyway, under the assumption that we simply missed the failing
exit code somehow.
I don't think I've ever seen this happen in the CI job, but running
locally using clang-14 on an 8-core machine, I can't seem to make it
through a full run of the test suite without having at least one
failure. And it's a different one every time (though they do seem to
often be related to packing tests, which makes sense, since that is one
of our biggest users of threaded code).
We can hack around this by only counting LSan log files that contain a
line that doesn't match our known-uninteresting pattern.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The strategy to compact multiple tables of reftables after many
operations accumulate many entries has been improved to avoid
accumulating too many tables uncollected.
* jt/reftable-geometric-compaction:
reftable/stack: use geometric table compaction
reftable/stack: add env to disable autocompaction
reftable/stack: expose option to disable auto-compaction
The codepaths that reach date_mode_from_type() have been updated to
pass "struct date_mode" by value to make them thread safe.
* rs/date-mode-pass-by-value:
date: make DATE_MODE thread-safe
The userdiff patterns for C# has been updated.
Acked-by: Johannes Sixt <j6t@kdbg.org>
cf. <c2154457-3f2f-496e-9b8b-c8ea7257027b@kdbg.org>
* sj/userdiff-c-sharp:
userdiff: better method/property matching for C#
Document and apply workaround for a buggy version of dash that
mishandles "local var=val" construct.
* jc/local-extern-shell-rules:
t1016: local VAR="VAL" fix
t0610: local VAR="VAL" fix
t: teach lint that RHS of 'local VAR=VAL' needs to be quoted
t: local VAR="VAL" (quote ${magic-reference})
t: local VAR="VAL" (quote command substitution)
t: local VAR="VAL" (quote positional parameters)
CodingGuidelines: quote assigned value in 'local var=$val'
CodingGuidelines: describe "export VAR=VAL" rule
When rerere handles a conflict with an unmatched opening conflict marker
in a file with other conflicts, it will fail create a preimage and also
fail allocate the status member of struct rerere_dir. Currently the
status member is allocated after the error handling. This will lead to a
SEGFAULT when the status member is accessed during cleanup of the failed
parse.
Additionally, in subsequent executions of rerere, after removing the
MERGE_RR.lock manually, rerere crashes for a similar reason. MERGE_RR
points to a conflict id that has no preimage, therefore the status
member is not allocated and a SEGFAULT happens when trying to check if a
preimage exists.
Solve this by making sure the status field is allocated correctly and add
tests to prevent the bug from reoccurring.
This does not fix the root cause, failing to parse stray conflict
markers, but I don't think we can do much better than recognizing it,
printing an error, and moving on gracefully.
Signed-off-by: Marcel Röthke <marcel@roethke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable that holds the value read from the core.excludefile
configuration variable used to leak, which has been corrected.
* jc/unleak-core-excludesfile:
config: do not leak excludes_file
The "shared repository" test in the t0610 reftable test failed
under restrictive umask setting (e.g. 007), which has been
corrected.
* ps/t0610-umask-fix:
t0610: execute git-pack-refs(1) with specified umask
t0610: make `--shared=` tests reusable
"git add -u <pathspec>" and "git commit [-i] <pathspec>" did not
diagnose a pathspec element that did not match any files in certain
situations, unlike "git add <pathspec>" did.
* gt/add-u-commit-i-pathspec-check:
builtin/add: error out when passing untracked path with -u
builtin/commit: error out when passing untracked path with -i
revision: optionally record matches with pathspec elements
Windows binary used to decide the use of unix-domain socket at
build time, but it learned to make the decision at runtime instead.
* ma/win32-unix-domain-socket:
Win32: detect unix socket support at runtime
In 0fea6b73f1 (Merge branch 'tb/multi-pack-verbatim-reuse', 2024-01-12)
we have introduced multi-pack verbatim reuse of objects. This series has
introduced a new BTMP chunk, which encodes information about bitmapped
objects in the multi-pack index. Starting with dab60934e3 (pack-bitmap:
pass `bitmapped_pack` struct to pack-reuse functions, 2023-12-14) we use
this information to figure out objects which we can reuse from each of
the packfiles.
One thing that we glossed over though is backwards compatibility with
repositories that do not yet have BTMP chunks in their multi-pack index.
In that case, `nth_bitmapped_pack()` would return an error, which causes
us to emit a warning followed by another error message. These warnings
are visible to users that fetch from a repository:
```
$ git fetch
...
remote: error: MIDX does not contain the BTMP chunk
remote: warning: unable to load pack: 'pack-f6bb7bd71d345ea9fe604b60cab9ba9ece54ffbe.idx', disabling pack-reuse
remote: Enumerating objects: 40, done.
remote: Counting objects: 100% (40/40), done.
remote: Compressing objects: 100% (39/39), done.
remote: Total 40 (delta 5), reused 0 (delta 0), pack-reused 0 (from 0)
...
```
While the fetch succeeds the user is left wondering what they did wrong.
Furthermore, as visible both from the warning and from the reuse stats,
pack-reuse is completely disabled in such repositories.
What is quite interesting is that this issue can even be triggered in
case `pack.allowPackReuse=single` is set, which is the default value.
One could have expected that in this case we fall back to the old logic,
which is to use the preferred packfile without consulting BTMP chunks at
all. But either we fail with the above error in case they are missing,
or we use the first pack in the multi-pack-index. The former case
disables pack-reuse altogether, whereas the latter case may result in
reusing objects from a suboptimal packfile.
Fix this issue by partially reverting the logic back to what we had
before this patch series landed. Namely, in the case where we have no
BTMP chunks or when `pack.allowPackReuse=single` are set, we use the
preferred pack instead of consulting the BTMP chunks.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NUL cannot appear in paths. Even disregarding filesystem path
limitations, the tree object format delimits with NUL, so such a path
cannot be encoded by Git.
When a quoted path is unquoted, it could possibly contain NUL from
"\000". Forbid it so it isn't truncated.
fast-import still has other issues with NUL, but those will be addressed
later.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply saying “C-style” string quoting is imprecise, as only a subset of
C escapes are supported. Document the exact escapes.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since filerename was added in f39a946a1f (Support wholesale
directory renames in fast-import, 2007-07-09) and filecopy in b6f3481bb4
(Teach fast-import to recursively copy files/directories, 2007-07-15),
both have produced an error when the destination path is empty. Later,
when support for targeting the root directory with an empty string was
added in 2794ad5244 (fast-import: Allow filemodify to set the root,
2010-10-10), this had the effect of allowing the quoted empty string
(`""`), but forbidding its unquoted variant (``). This seems to have
been intended as simple data validation for parsing two paths, rather
than a syntax restriction, because it was not extended to the other
operations.
All other occurrences of paths (in filemodify, filedelete, the source of
filecopy and filerename, and ls) allow both.
For most of this feature's lifetime, the documentation has not
prescribed the use of quoted empty strings. In e5959106d6
(Documentation/fast-import: put explanation of M 040000 <dataref> "" in
context, 2011-01-15), its documentation was changed from “`<path>` may
also be an empty string (`""`) to specify the root of the tree” to “The
root of the tree can be represented by an empty string as `<path>`”.
Thus, we should assume that some front-ends have depended on this
behavior.
Remove this restriction for the destination paths of filecopy and
filerename and change tests targeting the root to test `""` and ``.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Path parsing in fast-import is inconsistent and many unquoting errors
are suppressed or not checked.
<path> appears in the grammar in these places:
filemodify ::= 'M' SP <mode> (<dataref> | 'inline') SP <path> LF
filedelete ::= 'D' SP <path> LF
filecopy ::= 'C' SP <path> SP <path> LF
filerename ::= 'R' SP <path> SP <path> LF
ls ::= 'ls' SP <dataref> SP <path> LF
ls-commit ::= 'ls' SP <path> LF
and fast-import.c parses them in five different ways:
1. For filemodify and filedelete:
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes to the end of
the line (including any number of SP).
2. For filecopy (source) and filerename (source):
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes up to, but not
including, the next SP.
3. For filecopy (dest) and filerename (dest):
Like 1., but an unquoted empty string is forbidden.
4. For ls:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
5. For ls-commit:
Unquote <path> and report parse errors.
(It must start with `"` to disambiguate from ls.)
In the first three, any errors from trying to unquote a string are
suppressed, so a quoted string that contains invalid escapes would be
interpreted as literal bytes. For example, `"\xff"` would fail to
unquote (because hex escapes are not supported), and it would instead be
interpreted as the byte sequence '"', '\\', 'x', 'f', 'f', '"', which is
certainly not intended. Some front-ends erroneously use their language's
standard quoting routine instead of matching Git's, which could silently
introduce escapes that would be incorrectly parsed due to this and lead
to data corruption.
The documentation states “To use a source path that contains SP the path
must be quoted.”, so it is expected that some implementations depend on
spaces being allowed in paths in the final position. Thus we have two
documented ways to parse paths, so simplify the implementation to that.
Now we have:
1. `parse_path_eol` for filemodify, filedelete, filecopy (dest),
filerename (dest), ls, and ls-commit:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
2. `parse_path_space` for filecopy (source) and filerename (source):
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes up to, but not including, the
next SP. It must be followed by SP.
There remain two special cases: The dest <path> in filecopy and rename
cannot be an unquoted empty string (this will be addressed subsequently)
and <path> in ls-commit must be quoted to disambiguate it from ls.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t-prio-queue test has been cleaned up by using C99 compound
literals; this is meant to also serve as a weather-balloon to smoke
out folks with compilers who have trouble compiling code that uses
the feature.
* rs/t-prio-queue-cleanup:
t-prio-queue: simplify using compound literals
"git checkout/switch --detach foo", after switching to the detached
HEAD state, gave the tracking information for the 'foo' branch,
which was pointless.
Tested-by: M Hickford <mirth.hickford@gmail.com>
cf. <CAGJzqsmE9FDEBn=u3ge4LA3ha4fDbm4OWiuUbMaztwjELBd7ug@mail.gmail.com>
* jc/checkout-detach-wo-tracking-report:
checkout: omit "tracking" information on a detached HEAD
While the reftable format is a recent introduction in Git, JGit already
knows to read and write reftables since 2017. Given the complexity of
the format there is a very real risk of incompatibilities between those
two implementations, which is something that we really want to avoid.
Add some basic tests that verify that reftables written by Git and JGit
can be read by the respective other implementation. For now this test
suite is rather small, only covering basic functionality. But it serves
as a good starting point and can be extended over time.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of the Dash shell fail to parse `local var=val`
assignments in some cases when `val` is unquoted. Such failures can be
observed e.g. with Ubuntu 20.04 and older, which has a Dash version that
still has this bug.
Such an assignment has been introduced in t0610. The issue wasn't
detected for a while because this test used to only run when the
GIT_TEST_DEFAULT_REF_FORMAT environment variable was set to "reftable".
We have dropped that requirement now though, meaning that it runs
unconditionally, including on jobs which use such older versions of
Ubuntu.
We have worked around such issues in the past, e.g. in ebee5580ca
(parallel-checkout: avoid dash local bug in tests, 2021-06-06), by
quoting the `val` side. Apply the same fix to t0610.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t06xx exercise specific ref formats. Next to probing some
basic functionality, these tests also exercise other low-level details
specific to the format. Those tests are only executed though in case
`GIT_TEST_DEFAULT_REF_FORMAT` is set to the ref format of the respective
backend-under-test.
Ideally, we would run the full test matrix for ref formats such that our
complete test suite is executed with every supported format on every
supported platform. This is quite an expensive undertaking though, and
thus we only execute e.g. the "reftable" tests on macOS and Linux. As a
result, we basically have no test coverage for the "reftable" format at
all on other platforms like Windows.
Adapt these tests so that they override `GIT_TEST_DEFAULT_REF_FORMAT`,
which means that they'll always execute. This increases test coverage on
platforms that don't run the full test matrix, which at least gives us
some basic test coverage on those platforms for the "reftable" format.
This of course comes at the cost of running those tests multiple times
on platforms where we do run the full test matrix. But arguably, this is
a good thing because it will also cause us to e.g. run those tests with
the address sanitizer and other non-standard parameters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update, as a preparation to enhance "git update-ref --stdin".
* kn/clarify-update-ref-doc:
githooks: use {old,new}-oid instead of {old,new}-value
update-ref: use {old,new}-oid instead of {old,new}value
CST6CDT and the like are POSIX timezone, with no rule for transition.
And POSIX doesn't enforce how to interpret the rule if it's omitted.
Some libc (e.g. glibc) resorted back to IANA (formerly Olson) db rules
for those timezones. Some libc (e.g. FreeBSD) uses a fixed rule.
Other libc (e.g. musl) interpret that as no transition at all [1].
In addition, distributions (notoriously Debian-derived, which uses IANA
db for CST6CDT and the like) started to split "legacy" timezones
like CST6CDT, EST5EDT into `tzdata-legacy', which will not be installed
by default [2].
In those cases, t9604 will run into failure.
Let's switch to POSIX timezone with rules to change timezone.
1: http://mm.icann.org/pipermail/tz/2024-March/058751.html
2: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1043250
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test file assumes the "apply" backend is the default which is not
the case since 2ac0d6273f (rebase: change the default backend from "am"
to "merge", 2020-02-15). Make sure the "apply" backend is tested by
specifying it explicitly.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a helper function makes the tests shorter and avoids running "git
cat-file" upstream of a pipe.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform the setup in a dedicated test so the later tests can be run
independently. Also avoid running git upstream of a pipe and take
advantage of test_commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use advice_if_enabled() API to rewrite a simple pattern to
call advise() after checking advice_enabled().
* rj/use-adv-if-enabled:
add: use advise_if_enabled for ADVICE_ADD_EMBEDDED_REPO
add: use advise_if_enabled for ADVICE_ADD_EMPTY_PATHSPEC
add: use advise_if_enabled for ADVICE_ADD_IGNORED_FILE
"git pack-refs" learned the "--auto" option, which is a useful
addition to be triggered from "git gc --auto".
Acked-by: Karthik Nayak <karthik.188@gmail.com>
cf. <CAOLa=ZRAEA7rSUoYL0h-2qfEELdbPHbeGpgBJRqesyhHi9Q6WQ@mail.gmail.com>
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
The test script had an incomplete and ineffective attempt to avoid
clobbering the testing user's real crontab (and its equivalents),
which has been completed.
* es/test-cron-safety:
test-lib: fix non-functioning GIT_TEST_MAINT_SCHEDULER fallback
"git add -p" and other "interactive hunk selection" UI has learned to
skip showing the hunk immediately after it has already been shown, and
an additional action to explicitly ask to reshow the current hunk.
* rj/add-p-explicit-reshow:
add-patch: do not print hunks repeatedly
add-patch: introduce 'p' in interactive-patch
Documentation rules has been explicitly described how to mark-up
literal parts and a few manual pages have been updated as examples.
* ja/doc-markup-updates:
doc: git-clone: do not autoreference the manpage in itself
doc: git-clone: apply new documentation formatting guidelines
doc: git-init: apply new documentation formatting guidelines
doc: allow literal and emphasis format in doc vs help tests
doc: rework CodingGuidelines with new formatting rules
The "hint:" messages given by the advice mechanism, when given a
message with a blank line, left a line with trailing whitespace,
which has been cleansed.
* jc/advice-sans-trailing-whitespace:
advice: omit trailing whitespace
"git apply" failed to extract the filename the patch applied to,
when the change was about an empty file created in or deleted from
a directory whose name ends with a SP, which has been corrected.
* jc/apply-parse-diff-git-header-names-fix:
t4126: fix "funny directory name" test on Windows (again)
t4126: make sure a directory with SP at the end is usable
apply: parse names out of "diff --git" more carefully
The tests for git-pack-refs(1) with the `core.sharedRepository` config
execute git-pack-refs(1) outside of the shell that has the expected
umask set. This is wrong because we want to test the behaviour of that
command with different umasks. The issue went unnoticed because most
distributions have a default umask of 0022, and we only ever test with
`--shared=true`, which re-adds the group write bit.
Fix the issue by moving git-pack-refs(1) into the umask'd shell and add
a bunch of test cases that exercise behaviour more thoroughly.
Note that we drop the check for whether `core.sharedRepository` was set
to the correct value to make the test setup a bit easier. We should be
able to rely on git-init(1) doing its thing correctly. Furthermore, to
help readability, we convert tests that pass `--shared=true` to instead
pass the equivalent `--shared=group`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two kinds of `--shared=` tests, one for git-init(1) and one for
git-pack-refs(1). Merge them into a reusable function such that we can
easily add additional testcases with different umasks and flags for the
`--shared=` switch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we have disabled name checks in the "reftable"
backend. These checks were responsible for verifying multiple things
when writing records to the reftable stack:
- Detecting file/directory conflicts. Starting with the preceding
commits this is now handled by the reftable backend itself via
`refs_verify_refname_available()`.
- Validating refnames. This is handled by `check_refname_format()` in
the generic ref transacton layer.
The code in the reftable library is thus not used anymore and likely to
bitrot over time. Remove it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already perform explicit D/F checks in all reftable callbacks which
write refs, except when writing symrefs. For one this leads to an error
message which isn't perfectly actionable because we only tell the user
that there was a D/F conflict, but not which refs conflicted with each
other. But second, once all ref updating callbacks explicitly check for
D/F conflicts, we can disable the D/F checks in the reftable library
itself and thus avoid some duplicated efforts.
Refactor the code that writes symref tables to explicitly call into
`refs_verify_refname_available()` when writing symrefs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `write_copy_table()` function is shared between the reftable
implementations for renaming and copying refs. The only difference
between those two cases is that the rename will also delete the old
reference, whereas copying won't.
This has resulted in a bug though where we don't properly verify refname
availability. When calling `refs_verify_refname_available()`, we always
add the old ref name to the list of refs to be skipped when computing
availability, which indicates that the name would be available even if
it already exists at the current point in time. This is only the right
thing to do for renames though, not for copies.
The consequence of this bug is quite harmless because the reftable
backend has its own checks for D/F conflicts further down in the call
stack, and thus we refuse the update regardless of the bug. But all the
user gets in this case is an uninformative message that copying the ref
has failed, without any further details.
Fix the bug and only add the old name to the skip-list in case we rename
the ref. Consequently, this error case will now be handled by
`refs_verify_refname_available()`, which knows to provide a proper error
message.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The excludes_file variable is marked "const char *", but all the
assignments to it are made with a piece of memory allocated just
for it, and the variable is responsible for owning it.
When "core.excludesfile" is read, the code just lost the previous
value, leaking memory. Plug it.
The real problem is that the variable is mistyped; our convention
is to never make a variable that owns the piece of memory pointed
by it as "const". Fixing that would reduce the chance of this kind
of bug happening, and also would make it unnecessary to cast the
constness away while free()ing it, but that would be a much larger
follow-up effort.
Reported-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reduce the number of on-disk reftables, compaction is performed.
Contiguous tables with the same binary log value of size are grouped
into segments. The segment that has both the lowest binary log value and
contains more than one table is set as the starting point when
identifying the compaction segment.
Since segments containing a single table are not initially considered
for compaction, if the table appended to the list does not match the
previous table log value, no compaction occurs for the new table. It is
therefore possible for unbounded growth of the table list. This can be
demonstrated by repeating the following sequence:
git branch -f foo
git branch -d foo
Each operation results in a new table being written with no compaction
occurring until a separate operation produces a table matching the
previous table log value.
Instead, to avoid unbounded growth of the table list, the compaction
strategy is updated to ensure tables follow a geometric sequence after
each operation by individually evaluating each table in reverse index
order. This strategy results in a much simpler and more robust algorithm
compared to the previous one while also maintaining a minimal ordered
set of tables on-disk.
When creating 10 thousand references, the new strategy has no
performance impact:
Benchmark 1: update-ref: create refs sequentially (revision = HEAD~)
Time (mean ± σ): 26.516 s ± 0.047 s [User: 17.864 s, System: 8.491 s]
Range (min … max): 26.447 s … 26.569 s 10 runs
Benchmark 2: update-ref: create refs sequentially (revision = HEAD)
Time (mean ± σ): 26.417 s ± 0.028 s [User: 17.738 s, System: 8.500 s]
Range (min … max): 26.366 s … 26.444 s 10 runs
Summary
update-ref: create refs sequentially (revision = HEAD) ran
1.00 ± 0.00 times faster than update-ref: create refs sequentially (revision = HEAD~)
Some tests in `t0610-reftable-basics.sh` assert the on-disk state of
tables and are therefore updated to specify the correct new table count.
Since compaction is more aggressive in ensuring tables maintain a
geometric sequence, the expected table count is reduced in these tests.
In `reftable/stack_test.c` tests related to `sizes_to_segments()` are
removed because the function is no longer needed. Also, the
`test_suggest_compaction_segment()` test is updated to better showcase
and reflect the new geometric compaction behavior.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In future tests it will be neccesary to create repositories with a set
number of tables. To make this easier, introduce the
`GIT_TEST_REFTABLE_AUTOCOMPACTION` environment variable that, when set
to false, disables autocompaction of reftables.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The series was based on maint and fixes all the tests that exist
there, but we have acquired a few more.
I suspect that the values assigned in many of these places are $IFS
safe, and this is primarily to squelch the linter than adding a
necessary workaround for buggy dash.
Signed-off-by: Junio C Hamano <gitster@pobox.com>