The "disable repository discovery of a bare repository" check,
triggered by setting safe.bareRepository configuration variable to
'explicit', has been loosened to exclude the ".git/" directory inside
a non-bare repository from the check. So you can do "cd .git &&
git cmd" to run a Git command that works on a bare repository without
explicitly specifying $GIT_DIR now.
* kl/allow-working-in-dot-git-in-non-bare-repository:
setup: allow cwd=.git w/ bareRepository=explicit
"git archive --remote=<remote>" learned to talk over the smart
http (aka stateless) transport.
* jx/remote-archive-over-smart-http:
transport-helper: call do_take_over() in process_connect
transport-helper: call do_take_over() in connect_helper
http-backend: new rpc-service for git-upload-archive
transport-helper: protocol v2 supports upload-archive
remote-curl: supports git-upload-archive service
transport-helper: no connection restriction in connect_helper
All conditional "advice" messages show how to turn them off, which
becomes repetitive. Setting advice.* configuration explicitly on
now omits the instruction part.
* rj/advice-disable-how-to-disable:
advice: allow disabling the automatic hint in advise_if_enabled()
"git diff --no-rename A B" did not disable rename detection but did
not trigger an error from the command line parser.
* rs/parse-options-with-keep-unknown-abbrev-fix:
parse-options: simplify positivation handling
parse-options: fully disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
Rename detection logic ignored the final line of a file if it is an
incomplete line.
* en/diffcore-delta-final-line-fix:
diffcore-delta: avoid ignoring final 'line' of file
Define "special ref" as a very narrow set that consists of
FETCH_HEAD and MERGE_HEAD, and clarify everything else that used to
be classified as such are actually just pseudorefs.
* ps/not-so-many-refs-are-special:
Documentation: add "special refs" to the glossary
refs: redefine special refs
refs: convert MERGE_AUTOSTASH to become a normal pseudo-ref
sequencer: introduce functions to handle autostashes via refs
refs: convert AUTO_MERGE to become a normal pseudo-ref
sequencer: delete REBASE_HEAD in correct repo when picking commits
sequencer: clean up pseudo refs with REF_NO_DEREF
Update to a new feature recently added, "git show-ref --exists".
* tc/show-ref-exists-fix:
builtin/show-ref: treat directory as non-existing in --exists
Low-level I/O optimization for reftable.
* ps/reftable-optimize-io:
reftable/stack: fix race in up-to-date check
reftable/stack: unconditionally reload stack after commit
reftable/blocksource: use mmap to read tables
reftable/blocksource: refactor code to match our coding style
reftable/stack: use stat info to avoid re-reading stack list
reftable/stack: refactor reloading to use file descriptor
reftable/stack: refactor stack reloading to have common exit path
Tighten URL checks fsck makes in a URL recorded for submodules.
* vd/fsck-submodule-url-test:
submodule-config.c: strengthen URL fsck check
t7450: test submodule urls
test-submodule: remove command line handling for check-name
submodule-config.h: move check_submodule_url
When $HOME/.gitignore is missing but XDG config file available, we
should write into the latter, not former. "git gc" and "git
maintenance" wrote into a wrong "global config" file, which have
been corrected.
* kh/maintenance-use-xdg-when-it-should:
maintenance: use XDG config if it exists
config: factor out global config file retrieval
config: rename global config function
config: format newlines
A few tests to "git commit -o <pathspec>" and "git commit -i
<pathspec>" has been added.
* gt/test-commit-o-i-options:
t7501: add tests for --amend --signoff
t7501: add tests for --include and --only
CI for GitLab learned to drive macOS jobs.
* ps/gitlab-ci-macos:
ci: add macOS jobs to GitLab CI
ci: make p4 setup on macOS more robust
ci: handle TEST_OUTPUT_DIRECTORY when printing test failures
Makefile: detect new Homebrew location for ARM-based Macs
t7527: decrease likelihood of racing with fsmonitor daemon
Completion update to prepare for reftable
* ps/completion-with-reftable-fix:
completion: treat dangling symrefs as existing pseudorefs
completion: silence pseudoref existence check
completion: improve existence check for pseudo-refs
t9902: verify that completion does not print anything
completion: discover repo path in `__git_pseudoref_exists ()`
Tweak a few tests not to manually modify the reference database
(hence easier to work with other backends like reftable).
* jt/tests-with-reftable:
t5541: remove lockfile creation
t1401: remove lockfile creation
When given an existing but unreadable file as a configuration file,
gitweb behaved as if the file did not exist at all, but now it
errors out. This is a change that may break backward compatibility.
* mj/gitweb-unreadable-config-error:
gitweb: die when a configuration file cannot be read
Instead of manually creating refs/ hierarchy on disk upon a
creation of a secondary worktree, which is only usable via the
files backend, use the refs API to populate it.
* ps/worktree-refdb-initialization:
builtin/worktree: create refdb via ref backend
worktree: expose interface to look up worktree by name
builtin/worktree: move setup of commondir file earlier
refs/files: skip creation of "refs/{heads,tags}" for worktrees
setup: move creation of "refs/" into the files backend
refs: prepare `refs_init_db()` for initializing worktree refs
The error message given when "git branch -d branch" fails due to
commits unique to the branch has been split into an error and a new
conditional advice message.
* rj/advice-delete-branch-not-fully-merged:
branch: make the advice to force-deleting a conditional one
advice: fix an unexpected leading space
advice: sort the advice related lists
Comment updates to help developers not to attempt to modify
messages from plumbing commands that must stay constant.
It might make sense to reassess the plumbing needs every few years,
but that should be done as a separate effort.
* es/some-up-to-date-messages-must-stay:
messages: mark some strings with "up-to-date" not to touch
When a test fails in the GitHub Actions CI pipeline, we mark it up using
special GitHub syntax so it stands out when looking at the run log. We
also mark up "fixed" test cases, and skip passing tests since we want to
concentrate on the failures.
The finalize_test_case_output function in
test-lib-github-workflow-markup.sh which performs this markup is however
missing a fourth case: "broken" tests, i.e. tests using
'test_expect_failure' to document a known bug. This leads to these
"broken" tests appearing along with any failed tests, potentially
confusing the reader who might not be aware that "broken" is the status
for 'test_expect_failure' tests that indeed failed, and wondering what
their commits "broke".
Also skip these "broken" tests so that only failures and fixed tests
stand out.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing pattern among all callers of process_connect() seems to be
if (process_connect(...)) {
do_take_over();
... dispatch to the underlying method ...
}
... otherwise implement the fallback ...
where the return value from process_connect() is the return value of the
call it makes to process_connect_service().
Move the call of do_take_over() inside process_connect(), so that
calling the process_connect() function is more concise and will not
miss do_take_over().
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After successfully connecting to the smart transport by calling
process_connect_service() in connect_helper(), run do_take_over() to
replace the old vtable with a new one which has methods ready for the
smart transport connection. This fixes the exit code of git-archive
in test case "archive remote http repository" of t5003.
The connect_helper() function is used as the connect method of the
vtable in "transport-helper.c", and it is called by transport_connect()
in "transport.c" to setup a connection. The only place that we call
transport_connect() so far is in "builtin/archive.c". Without running
do_take_over(), it may fail to call transport_disconnect() in
run_remote_archiver() of "builtin/archive.c". This is because for a
stateless connection and a service like "git-upload-archive", the
remote helper may receive a SIGPIPE signal and exit early. Call
do_take_over() to have a graceful disconnect method, so that we still
call transport_disconnect() even if the remote helper exits early.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new rpc-service "upload-archive" in http-backend to add server side
support for remote archive over HTTP/HTTPS protocols.
Also add new test cases in t5003. In the test case "archive remote http
repository", git-archive exits with a non-0 exit code even though we
create the archive correctly. It will be fixed in a later commit.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to support only git-upload-pack service for protocol v2. In
order to support remote archive over HTTP/HTTPS protocols, add new
service support for git-upload-archive in protocol v2.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new service (git-upload-archive) support in remote-curl, so we can
support remote archive over HTTP/HTTPS protocols. Differences between
git-upload-archive and other services:
1. The git-archive program does not expect to see protocol version and
capabilities when connecting to remote-helper, so do not send them
in remote-curl for the git-upload-archive service.
2. We need to detect protocol version by calling discover_refs().
Fallback to use the git-upload-pack service (which, like
git-upload-archive, is a read-only operation) to discover protocol
version.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit b236752a (Support remote archive from all smart transports,
2009-12-09) added "remote archive" support for "smart transports", it
was for transport that supports the ".connect" method. The
"connect_helper()" function protected itself from getting called for a
transport without the method before calling process_connect_service(),
which only worked with the ".connect" method.
Later, commit edc9caf7 (transport-helper: introduce stateless-connect,
2018-03-15) added a way for a transport without the ".connect" method
to establish a "stateless" connection in protocol v2, where
process_connect_service() was taught to handle the ".stateless_connect"
method, making the old protection too strict. But commit edc9caf7 forgot
to adjust this protection accordingly. Even at the time of commit
b236752a, this protection seemed redundant, since
process_connect_service() would return 0 if the connection could not be
established, and connect_helper() would still die() early.
Remove the restriction in connect_helper() and give the function
process_connect_service() the opportunity to establish a connection
using ".connect" or ".stateless_connect" for protocol v2. So we can
connect with a stateless-rpc and do something useful. E.g., in a later
commit, implements remote archive for a repository over HTTP protocol.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We accept the positive version of options whose long name starts with
"no-" and are defined without the flag PARSE_OPT_NONEG. E.g. git clone
has an explicitly defined --no-checkout option and also implicitly
accepts --checkout to override it.
parse_long_opt() handles that by restarting the option matching with the
positive version when it finds that only the current option definition
starts with "no-", but not the user-supplied argument. This code is
located almost at the end of the matching logic.
Avoid the need for a restart by moving the code up. We don't have to
check the positive arg against the negative long_name at all -- the
"no-" prefix of the latter makes a match impossible. Skip it and toggle
OPT_UNSET right away to simplify the control flow.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe.bareRepository setting can be set to 'explicit' to disallow
implicit uses of bare repositories, preventing an attack [1] where an
artificial and malicious bare repository is embedded in another git
repository. Unfortunately, some tooling uses myrepo/.git/ as the cwd
when executing commands, and this is blocked when
safe.bareRepository=explicit. Blocking is unnecessary, as git already
prevents nested .git directories.
Teach git to not reject uses of git inside of the .git directory: check
if cwd is .git (or a subdirectory of it) and allow it even if
safe.bareRepository=explicit.
[1] https://github.com/justinsteven/advisories/blob/main/2022_git_buried_bare_repos_and_fsmonitor_various_abuses.md
Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit code of the preceding command in a pipe is disregarded. So
if that preceding command is a Git command that fails, the test would
not fail. Instead, by saving the output of that Git command to a file,
and removing the pipe, we make sure the test will fail if that Git
command fails.
Signed-off-by: Achu Luma <ach.lumap@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the instruction for subscribing to the Git mailing list
we have on a few documentation pages.
Reported-by: Kyle Lippincott <spectral@google.com>
Helped-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27) turned off support for abbreviated
options when the flag PARSE_OPT_KEEP_UNKNOWN is given, as any shortened
option could also be an abbreviation for one of the unknown options.
The code for handling abbreviated options is guarded by an if, but it
can also be reached via goto. baa4adc66a only blocked the first way.
Add the condition to the other ones as well.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0024 has multiple command invocations on a single line, which
goes against the style described in CodingGuidelines, thus fix
that.
Also, use the -C flag to give the destination when using $TAR,
therefore, not requiring a subshell.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace pipe with redirection operator '>' to store the output
to a temporary file after 'git archive' command since the pipe
will swallow the command's exit code and a crash won't
necessarily be noticed.
Also fix an unwanted space after redirection '>' to match the
style described in CodingGuidelines.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to (rather cryptic) Security Identifiers, show username
and domain in the error message when we barf on mismatch between
the Git directory and the current user on Windows.
* sk/mingw-owner-check-error-message-improvement:
mingw: give more details about unsafe directory's ownership
