Our order for processing of entries means that if we have a tree of
files that looks like
Makefile
src/moduleA/foo.c
src/moduleA/bar.c
src/moduleB/baz.c
src/moduleB/umm.c
tokens.txt
Then we will process paths in the order of the leftmost column below. I
have added two additional columns that help explain the algorithm that
follows; the 2nd column is there to remind us we have oid & mode info we
are tracking for each of these paths (which differs between the paths
which I'm not representing well here), and the third column annotates
the parent directory of the entry:
tokens.txt <version_info> ""
src/moduleB/umm.c <version_info> src/moduleB
src/moduleB/baz.c <version_info> src/moduleB
src/moduleB <version_info> src
src/moduleA/foo.c <version_info> src/moduleA
src/moduleA/bar.c <version_info> src/moduleA
src/moduleA <version_info> src
src <version_info> ""
Makefile <version_info> ""
When the parent directory changes, if it's a subdirectory of the previous
parent directory (e.g. "" -> src/moduleB) then we can just keep appending.
If the parent directory differs from the previous parent directory and is
not a subdirectory, then we should process that directory.
So, for example, when we get to this point:
tokens.txt <version_info> ""
src/moduleB/umm.c <version_info> src/moduleB
src/moduleB/baz.c <version_info> src/moduleB
and note that the next entry (src/moduleB) has a different parent than
the last one that isn't a subdirectory, we should write out a tree for it
100644 blob <HASH> umm.c
100644 blob <HASH> baz.c
then pop all the entries under that directory while recording the new
hash for that directory, leaving us with
tokens.txt <version_info> ""
src/moduleB <new version_info> src
This process repeats until at the end we get to
tokens.txt <version_info> ""
src <new version_info> ""
Makefile <version_info> ""
and then we can write out the toplevel tree. Since we potentially have
entries in our string_list corresponding to multiple different toplevel
directories, e.g. a slightly different repository might have:
whizbang.txt <version_info> ""
tokens.txt <version_info> ""
src/moduleD <new version_info> src
src/moduleC <new version_info> src
src/moduleB <new version_info> src
src/moduleA/foo.c <version_info> src/moduleA
src/moduleA/bar.c <version_info> src/moduleA
When src/moduleA is popped off, we need to know that the "last
directory" reverts back to src, and how many entries in our string_list
are associated with that parent directory. So I use an auxiliary
offsets string_list which would have (parent_directory,offset)
information of the form
"" 0
src 2
src/moduleA 5
Whenever I write out a tree for a subdirectory, I set versions.nr to
the final offset value and then decrement offsets.nr...and then add
an entry to versions with a hash for the new directory.
The idea is relatively simple, there's just a lot of accounting to
implement this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new function, write_tree(), which will take a list of
basenames, modes, and oids for a single directory and create a tree
object in the object-store. We do not yet have just basenames, modes,
and oids for just a single directory (we have a mixture of entries from
all directory levels in the hierarchy) so we still die() before the
current call to write_tree(), but the next patch will rectify that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a step towards transforming the processed path->conflict_info entries
into an actual tree object, start recording basenames, modes, and oids
in a dir_metadata structure. Subsequent commits will make use of this
to actually write a tree.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to handle paths below a directory before needing to handle the
directory itself. Also, we want to handle the directory immediately
after the paths below it, so we can't use simple lexicographic ordering
from strcmp (which would insert foo.txt between foo and foo/file.c).
Copy string_list_df_name_compare() from merge-recursive.c, and set up a
string list of paths sorted by that function so that we can iterate in
the desired order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a process_entries() implementation that just loops over the paths
and processes each one individually with an auxiliary process_entry()
call. Add a basic process_entry() as well, which handles several cases
but leaves a few of the more involved ones with die-not-implemented
messages. Also, although process_entries() is supposed to create a
tree, it does not yet have code to do so -- except in the special case
of merging completely empty trees.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When all three trees have the same oid, there is no need to recurse into
these trees to find that all files within them happen to match. We can
just record any one of the trees as the resolution of merging that
particular path.
Immediately resolving trees for other types of trivial tree merges (such
as one side matches the merge base, or the two sides match each other)
would prevent us from detecting renames for some paths, and thus prevent
us from doing three-way content merges for those paths whose renames we
did not detect.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a helper function, setup_path_info(), which can be used to record
all the information we want in a merged_info or conflict_info. While
there is currently only one caller of this new function, and some of its
particular parameters are fixed, future callers of this function will be
added later.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three-way merges, by their nature, are going to often have two or more
trees match at a given subdirectory. We can avoid calling
fill_tree_descriptor() on the same tree by checking when these trees
match. Noting when various oids match will also be useful in other
calculations and optimizations as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does not actually collect any necessary info other than the
pathnames involved, since it just allocates an all-zero conflict_info
and stuffs that into paths. However, it invokes the traverse_trees()
machinery to walk over all the paths and sets up the basic
infrastructure we need.
I have left out a few obvious optimizations to try to make this patch as
short and obvious as possible. A subsequent patch will add some of
those back in with some more useful data fields before we introduce a
patch that actually sets up the conflict_info fields.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various places in merge-recursive used an err() function when it hit
some kind of unrecoverable error. That code was from the reusable bits
of merge-recursive.c that we liked, such as merge_3way, writing object
files to the object store, reading blobs from the object store, etc. So
create a similar function to allow us to port that code over, and use it
for when we detect problems returned from collect_merge_info()'s
traverse_trees() call, which we will be adding next.
While we are at it, also add more documentation for the "clean" field
from struct merge_result, particularly since the name suggests a boolean
but it is not quite one and this is our first non-boolean usage.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In my cursory investigation, histogram diffs are about 2% slower than
Myers diffs. Others have probably done more detailed benchmarks. But,
in short, histogram diffs have been around for years and in a number of
cases provide obviously better looking diffs where Myers diffs are
unintelligible but the performance hit has kept them from becoming the
default.
However, there are real merge bugs we know about that have triggered on
git.git and linux.git, which I don't have a clue how to address without
the additional information that I believe is provided by histogram
diffs. See the following:
https://lore.kernel.org/git/20190816184051.GB13894@sigill.intra.peff.net/https://lore.kernel.org/git/CABPp-BHvJHpSJT7sdFwfNcPn_sOXwJi3=o14qjZS3M8Rzcxe2A@mail.gmail.com/https://lore.kernel.org/git/CABPp-BGtez4qjbtFT1hQoREfcJPmk9MzjhY5eEq1QhXT23tFOw@mail.gmail.com/
I don't like mismerges. I really don't like silent mismerges. While I
am sometimes willing to make performance and correctness tradeoff, I'm
much more interested in correctness in general. I want to fix the above
bugs. I have not yet started doing so, but I believe histogram diff at
least gives me an angle. Unfortunately, I can't rely on using the
information from histogram diff unless it's in use. And it hasn't been
used because of a few percentage performance hit.
In testcases I have looked at, merge-ort is _much_ faster than
merge-recursive for non-trivial merges/rebases/cherry-picks. As such,
this is a golden opportunity to switch out the underlying diff algorithm
(at least the one used by the merge machinery; git-diff and git-log are
separate questions); doing so will allow me to get additional data and
improved diffs, and I believe it will help me fix the above bugs at some
point in the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_start() basically does a bunch of sanity checks, then allocates
and initializes opt->priv -- a struct merge_options_internal.
Most of the sanity checks are usable as-is. The
allocation/intialization is a bit different since merge-ort has a very
different merge_options_internal than merge-recursive, but the idea is
the same.
The weirdest part here is that merge-ort and merge-recursive use the
same struct merge_options, even though merge_options has a number of
fields that are oddly specific to merge-recursive's internal
implementation and don't even make sense with merge-ort's high-level
design (e.g. buffer_output, which merge-ort has to always do). I reused
the same data structure because:
* most the fields made sense to both merge algorithms
* making a new struct would have required making new enums or somehow
externalizing them, and that was getting messy.
* it simplifies converting the existing callers by not having to
have different code paths for merge_options setup.
I also marked detect_renames as ignored. We can revisit that later, but
in short: merge-recursive allowed turning off rename detection because
it was sometimes glacially slow. When you speed something up by a few
orders of magnitude, it's worth revisiting whether that justification is
still relevant. Besides, if folks find it's still too slow, perhaps
they have a better scaling case than I could find and maybe it turns up
some more optimizations we can add. If it still is needed as an option,
it is easy to add later.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_ort_nonrecursive_internal() will be used by both
merge_inmemory_nonrecursive() and merge_inmemory_recursive(); let's
focus on it for now. It involves some setup -- merge_start() --
followed by the following chain of functions:
collect_merge_info()
This function will populate merge_options_internal's paths field,
via a call to traverse_trees() and a new callback that will be added
later.
detect_and_process_renames()
This function will detect renames, and then adjust entries in paths
to move conflict stages from old pathnames into those for new
pathnames, so that the next step doesn't have to think about renames
and just can do three-way content merging and such.
process_entries()
This function determines how to take the various stages (versions of
a file from the three different sides) and merge them, and whether
to mark the result as conflicted or cleanly merged. It also writes
out these merged file versions as it goes to create a tree.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up some basic internal data structures. The only carry-over from
merge-recursive.c is call_depth, though needed_rename_limit will be
added later.
The central piece of data will definitely be the strmap "paths", which
will map every relevant pathname under consideration to either a
merged_info or a conflict_info. ("conflicted" is a strmap that is a
subset of "paths".)
merged_info contains all relevant information for a non-conflicted
entry. conflict_info contains a merged_info, plus any additional
information about a conflict such as the higher orders stages involved
and the names of the paths those came from (handy once renames get
involved). If an entry remains conflicted, the merged_info portion of a
conflict_info will later be filled with whatever version of the file
should be placed in the working directory (e.g. an as-merged-as-possible
variation that contains conflict markers).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-parse has several options which print various paths. Some of
these paths are printed relative to the current working directory, and
some are absolute.
Normally, this is not a problem, but there are times when one wants
paths entirely in one format or another. This can be done trivially if
the paths are canonical, but canonicalizing paths is not possible on
some shell scripting environments which lack realpath(1) and also in Go,
which lacks functions that properly canonicalize paths on Windows.
To help out the scripter, let's provide an option which turns most of
the paths printed by git rev-parse to be either relative to the current
working directory or absolute and canonical. Document which options are
affected and which are not so that users are not confused.
This approach is cleaner and tidier than providing duplicates of
existing options which are either relative or absolute.
Note that if the user needs both forms, it is possible to pass an
additional option in the middle of the command line which changes the
behavior of subsequent operations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have a function to resolve paths, strbuf_realpath. This
function canonicalizes paths like realpath(3), but permits a trailing
component to be absent from the file system. In other words, this is
the behavior of the GNU realpath(1) without any arguments.
In the future, we'll need this same behavior, except that we want to
allow for any number of missing trailing components, which is the
behavior of GNU realpath(1) with the -m option. This is useful because
we'll want to canonicalize a path that may point to a not yet present
path under the .git directory. For example, a user may want to know
where an arbitrary ref would be stored if it existed in the file system.
Let's refactor strbuf_realpath to move most of the code to an internal
function and then pass it two flags to control its behavior. We'll add
a strbuf_realpath_forgiving function that has our new behavior, and
leave strbuf_realpath with the older, stricter behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use --fixed-value in git-config calls in the git-maintenance tests, so
that the tests will continue to work even if the repo path contains
regexp metacharacters.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "key_value_separator" option to the "%(trailers)" pretty format,
to go along with the existing "separator" argument. In combination
these two options make it trivial to produce machine-readable (e.g. \0
and \0\0-delimited) format output.
As elaborated on in a previous commit which added "keyonly" it was
needlessly tedious to extract structured data from "%(trailers)"
before the addition of this "key_value_separator" option. As seen by
the test being added here extracting this data now becomes trivial.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a "keyonly". This allows for easier parsing out of the
key and value. Before if you didn't want to make assumptions about how
the key was formatted. You'd need to parse it out as e.g.:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
And then proceed to deduce keys by looking at those two and
subtracting the value plus the hardcoded ": " separator from the
non-valueonly %(trailers) line. Now it's possible to simply do:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00,keyonly)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
Which at least reduces it to a state machine where you get N keys and
correlate them with N values. Even better would be to have a way to
change the ": " delimiter to something easily machine-readable (a key
might contain ": " too). A follow-up change will add support for that.
I don't really have a use-case for just "keyonly" myself. I suppose it
would be useful in some cases as "key=*" matches case-insensitively,
so a plain "keyonly" will give you the variants of the keys you
matched. I'm mainly adding it to fix the inconsistency with
"valueonly".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix %(trailers:valueonly) being a noop due to on overly eager
optimization in format_trailer_info() which skips custom formatting if
no custom options are given.
When "valueonly" was added in d9b936db52 (pretty: add support for
"valueonly" option in %(trailers), 2019-01-28) we forgot to add it to
the list of options that optimization checks for. See e.g. the
addition of "key" in 250bea0c16 (pretty: allow showing specific
trailers, 2019-01-28) for a similar change where this wasn't missed.
Thus the "valueonly" option in "%(trailers:valueonly)" was a noop and
the output was equivalent to that of a plain "%(trailers)". This
wasn't caught because the tests for it always combined it with other
options.
Fix the bug by adding !opts->value_only to the list. I initially
attempted to make this more future-proof by setting a flag if we got
to ":" in "%(trailers:" in format_commit_one() in pretty.c. However,
"%(trailers:" is also parsed in trailers_atom_parser() in
ref-filter.c.
There is an outstanding patch[1] unify those two, and such a fix, or
other future-proofing, such as changing "process_trailer_options"
flags into a bitfield, would conflict with that effort. Let's instead
do the bare minimum here as this aspect of trailers is being actively
worked on by another series.
Let's also test for a plain "valueonly" without any other options, as
well as "separator". All the other existing options on the pretty.c
path had tests where they were the only option provided. I'm also
keeping a sanity test for "%(trailers:)" being the same as
"%(trailers)". There's no reason to suspect it wouldn't be in the
current implementation, but let's keep it in the interest of black box
testing.
1. https://lore.kernel.org/git/pull.726.git.1599335291.gitgitgadget@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation for the various %(trailers) options so it
isn't repeating part of the documentation for "only" about how boolean
values are handled. Instead, let's split the description of that into
general documentation at the top.
It then suffices to refer to it by listing the options as
"opt[=<BOOL>]". I'm also changing it to upper-case "[=<BOOL>]" from
"[=val]" for consistency with "<SEP>"
It took me a couple of readings to realize that these options were
referring back to the "only" option's treatment of boolean
values.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression has been introduced by a62387b (submodule.c: fetch in
submodules git directory instead of in worktree, 2018-11-28).
The scenario in which it triggers is when one has a repository with a
submodule inside a submodule like this:
superproject/middle_repo/inner_repo
Person A and B have both a clone of it, while Person B is not working
with the inner_repo and thus does not have it initialized in his working
copy.
Now person A introduces a change to the inner_repo and propagates it
through the middle_repo and the superproject.
Once person A pushed the changes and person B wants to fetch them using
"git fetch" at the superproject level, B's git call will return with
error saying:
Could not access submodule 'inner_repo'
Errors during submodule fetch:
middle_repo
Expectation is that in this case the inner submodule will be recognized
as uninitialized submodule and skipped by the git fetch command.
This used to work correctly before 'a62387b (submodule.c: fetch in
submodules git directory instead of in worktree, 2018-11-28)'.
Starting with a62387b the code wants to evaluate "is_empty_dir()" inside
.git/modules for a directory only existing in the worktree, delivering
then of course wrong return value.
This patch ensures is_empty_dir() is getting the correct path of the
uninitialized submodule by concatenation of the actual worktree and the
name of the uninitialized submodule.
The first attempt to fix this regression, in 1b7ac4e6d4 (submodules:
fix of regression on fetching of non-init subsub-repo, 2020-11-12), by
simply reverting a62387b, resulted in an infinite loop of submodule
fetches in the simpler case of a recursive fetch of a superproject with
uninitialized submodules, and so this commit was reverted in 7091499bc0
(Revert "submodules: fix of regression on fetching of non-init
subsub-repo", 2020-12-02).
To prevent future breakages, also add a regression test for this
scenario.
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
CC: Junio C Hamano <gitster@pobox.com>
CC: Philippe Blain <levraiphilippeblain@gmail.com>
CC: Ralf Thielow <ralf.thielow@gmail.com>
CC: Eric Sunshine <sunshine@sunshineco.us>
Reviewed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'dist' target uses a versioned temp directory, $(GIT_TARNAME), into
which it copies various files added to the distribution tarball. Should
it be necessary to remove this directory in the 'clean' target, since
the name depends on $(GIT_VERSION), the current HEAD must be positioned
on the same commit as when 'make dist' was issued. Otherwise, the target
will fail to remove that directory.
Create an '.dist-tmp-dir' directory and copy the various files into this
now un-versioned directory while creating the distribution tarball. Change
the 'clean' target to remove the '.dist-tmp-dir' directory, instead of the
version dependent $(GIT_TARNAME) directory.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target includes code to remove an '*.tar.gz' file that
was the by-product of a debian build. This was originally added by
commit 5a571cdd8a (Clean generated files a bit more, to cope with
Debian build droppings., 2005-08-12). However, all support for the
'debian build' was dropped by commit 7d0e65b892 (Retire debian/
directory., 2006-01-06), which seems to have simply forgotten to
remove the 'git-core_$(GIT_VERSION)-*.tar.gz' from the 'clean'
target. Remove it now.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target is still noticeably slow on cygwin, despite the
improvements made by previous patches. For example, the second
invocation of 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
...
make[1]: Entering directory '/home/ramsay/git/gitweb'
make[2]: Entering directory '/home/ramsay/git'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/home/ramsay/git'
...
$
has been timed at 10.361s on my laptop (an old core i5-4200M @ 2.50GHz,
8GB RAM, 1TB HDD).
Notice that the 'clean' target is making a nested call to the parent
Makefile to ensure that the GIT-VERSION-FILE is up-to-date. This is to
ensure that the $(GIT_VERSION) make variable is set, once that file had
been included. However, the 'clean' target does not use the $(GIT_VERSION)
variable, directly or indirectly, so it does not have any affect on what
the target removes. Therefore, the time spent on ensuring an up to date
GIT-VERSION-FILE is wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include ../GIT-VERSION-FILE' when the
target is not 'clean'. (This drops the time down to 8.430s, on my laptop,
giving an improvement of 18.64%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target is still noticeably slow on cygwin, despite the
substantial improvement made by the previous patch. For example, the
second invocation of 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
make[2]: Entering directory '/home/ramsay/git'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/home/ramsay/git'
...
$
has been timed at 12.364s on my laptop (an old core i5-4200M @ 2.50GHz,
8GB RAM, 1TB HDD).
Notice that the 'clean' target is making a nested call to the parent
Makefile to ensure that the GIT-VERSION-FILE is up-to-date (prior to
the previous patch, there would have been _two_ such invocations).
This is to ensure that the $(GIT_VERSION) make variable is set, once
that file had been included. However, the 'clean' target does not use
the $(GIT_VERSION) variable, directly or indirectly, so it does not
have any affect on what the target removes. Therefore, the time spent
on ensuring an up to date GIT-VERSION-FILE is wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include ../GIT-VERSION-FILE' when the
target is not 'clean'. (This drops the time down to 10.361s, on my laptop,
giving an improvement of 16.20%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target is noticeably slow on cygwin, even for a 'do-nothing'
invocation of 'make clean'. For example, the second 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
GIT_VERSION = 2.29.0
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
...
$
has been timed at 23.339s, using git v2.29.0, on my laptop (an old core
i5-4200M @ 2.50GHz, 8GB RAM, 1TB HDD).
Notice that, since the 'doc.dep' file does not exist, make takes the
time (about 8s) to generate several files in order to create the doc.dep
include file. (If an 'include' file is missing, but a target for the
said file is present in the Makefile, make will execute that target
and, if that file now exists, throw away all its internal data and
re-read and re-parse the Makefile). Having spent the time to include
the 'doc.dep' file, the 'clean' target immediately deletes those files.
The document dependencies specified in the 'doc.dep' include file,
expressed as make targets and prerequisites, do not affect what the
'clean' target removes. Therefore, the time spent in generating the
dependencies is completely wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include doc.dep' when the target is
not 'clean'. (This drops the time down to 12.364s, on my laptop, giving
an improvement of 47.02%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git imap-send" used to ignore configuration variables like
core.askpass; this has been corrected.
* nm/imap-send-use-default-config:
imap-send: parse default git config
Non-reentrant time-related library functions and ctime/asctime with
awkward calling interfaces are banned from the codebase.
* jk/banned:
banned.h: mark ctime_r() and asctime_r() as banned
banned.h: mark non-reentrant gmtime, etc as banned
"git maintenance run/start/stop" needed to be run in a repository
to hold the lockfile they use, but didn't make sure they are
actually in a repository, which has been corrected.
* rs/maintenance-run-outside-repo:
t7900: fix typo: "test_execpt_success"
maintenance: fix SEGFAULT when no repository
"fetch-pack" could pass NULL pointer to unlink(2) when it sees an
invalid filename; the error checking has been tightened to make
this impossible.
* rs/fetch-pack-invalid-lockfile:
fetch-pack: disregard invalid pack lockfiles
Code clean-up.
* ma/grep-init-default:
MyFirstObjectWalk: drop `init_walken_defaults()`
grep: copy struct in one fell swoop
grep: use designated initializers for `grep_defaults`
grep: don't set up a "default" repo for grep
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
"git apply" adjusted the permission bits of working-tree files and
directories according core.sharedRepository setting by mistake and
for a long time, which has been corrected.
* mt/do-not-use-scld-in-working-tree:
apply: don't use core.sharedRepository to create working tree files
"git maintenance" command had trouble working in a directory whose
pathname contained an ERE metacharacter like '+'.
* ds/maintenance-part-3:
maintenance: use 'git config --fixed-value'
Various subcommands of "git config" that takes value_regex
learn the "--literal-value" option to take the value_regex option
as a literal string.
* ds/config-literal-value:
config doc: value-pattern is not necessarily a regexp
config: implement --fixed-value with --get*
config: plumb --fixed-value into config API
config: add --fixed-value option, un-implemented
t1300: add test for --replace-all with value-pattern
t1300: test "set all" mode with value-pattern
config: replace 'value_regex' with 'value_pattern'
config: convert multi_replace to flags
Processes that access packdata while the .idx file gets removed
(e.g. while repacking) did not fail or fall back gracefully as they
could.
* tb/idx-midx-race-fix:
midx.c: protect against disappearing packs
packfile.c: protect against disappearing indexes
"git update-ref --stdin" learns to take multiple transactions in a
single session.
* ps/update-ref-multi-transaction:
update-ref: disallow "start" for ongoing transactions
p1400: use `git-update-ref --stdin` to test multiple transactions
update-ref: allow creation of multiple transactions
t1400: avoid touching refs on filesystem
"git add -i" failed to honor custom colors configured to show
patches, which has been corrected.
* js/add-i-color-fix:
add -i: verify in the tests that colors can be overridden
add -p: prefer color.diff.context over color.diff.plain
add -i (Perl version): color header to match the C version
add -i (built-in): use the same indentation as the Perl version
add -p (built-in): do not color the progress indicator separately
add -i (built-in): use correct names to load color.diff.* config
add -i (built-in): prevent the `reset` "color" from being configured
add -i: use `reset_color` consistently
add -p (built-in): imitate `xdl_format_hunk_hdr()` generating hunk headers
add -i (built-in): send error messages to stderr
add -i (built-in): do show an error message for incorrect inputs
If the old bitmap file contains a bitmap for a given commit, then that
commit does not need help from intermediate commits in its history to
compute its final bitmap. Eject that commit from the walk and insert it
into a separate list of reusable commits that are eventually stored in
the list of commits for computing bitmaps.
This helps the repeat bitmap computation task, even if the selected
commits shift drastically. This helps when a previously-bitmapped commit
exists in the first-parent history of a newly-selected commit. Since we
stop the walk at these commits and we use a first-parent walk, it is
harder to walk "around" these bitmapped commits. It's not impossible,
but we can greatly reduce the computation time for many selected
commits.
| runtime (sec) | peak heap (GB) |
| | |
| from | with | from | with |
| scratch | existing | scratch | existing |
-----------+---------+----------+---------+-----------
last patch | 88.478 | 53.218 | 2.157 | 2.224 |
this patch | 86.681 | 16.164 | 2.157 | 2.222 |
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>