In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started that transition, trying to prepare for a
time when `git init` would use that name for the initial branch.
Even if that time has not arrived, we can complete the transition by
making the test script independent of the default branch name. This also
allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq from one test
case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 56300ff356 (t3200: prepare for `main` being shorter than `master`,
2020-10-23) and in 66713e84e7 (tests: prepare aligned mentions of the
default branch name, 2020-10-23), we started to prepare t3200 for a new
world where `git init` uses the branch name `main` for the initial
branch.
We do not even have to wait for that new world: we can easily ensure
that that branch name is used, independent of the exact name `git init`
will give the initial branch, so let's do that.
This also lets us remove the `PREPARE_FOR_MAIN_BRANCH` prereq from three
test cases in that script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 3224b0f0bb (t1400: prepare for `main` being default branch name,
2020-10-23), we prepared t1400 for a time when the default initial
branch name would be `main`.
However, there is no need to wait that long: let's adjust the test
script to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from two test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "git diff -w --exit-code" should exit with 0 when ignoring
whitespace differences results in no changes shown, if ignoring
certain changes with "git diff -I<pattern> --exit-code" result in an
empty patch, we should exit with 0.
The test suite did not cover the interaction between "--exit-code"
and "-w"; add one while adding a new test for "--exit-code" + "-I".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_perf() runs each test in its own subshell which makes it difficult
to persist variables between tests. test_export() addresses this
shortcoming by grabbing the values of specified variables after a test
runs but before the subshell exits, and writes those values to a file
which is loaded into the environment of subsequent tests.
To grab the values to be persisted, test_export() pipes the output of
the shell's builtin `set` command through `sed` which plucks them out
using a regular expression along the lines of `s/^(var1|var2)/.../p`.
Unfortunately, though, this use of alternation is not portable. For
instance, BSD-lineage `sed` (including macOS `sed`) does not support it
in the default "basic regular expression" mode (BRE). It may be possible
to enable "extended regular expression" mode (ERE) in some cases with
`sed -E`, however, `-E` is neither portable nor part of POSIX.
Fortunately, alternation is unnecessary in this case and can easily be
avoided, so replace it with a series of simple expressions such as
`s/^var1/.../p;s/^var2/.../p`.
While at it, tighten the expressions so they match the variable names
exactly rather than matching prefixes (i.e. use `s/^var1=/.../p`).
If the requirements of test_export() become more complex in the future,
then an alternative would be to replace `sed` with `perl` which supports
alternation on all platforms, however, the simple elimination of
alternation via multiple `sed` expressions suffices for the present.
Reported-by: Sangeeta <sangunb09@gmail.com>
Diagnosed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to display the annoying warning on every pull... only
the ones that are not fast-forward.
The current warning tests still pass, but not because of the arguments
or the configuration, but because they are all fast-forward.
We need to test non-fast-forward situations now.
Suggestions-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the advise() call that teaches users how they can choose
between merge and rebase into a helper function. This revealed that
the caller's logic needs to be further clarified to allow future
actions (like "erroring out" instead of the current "go ahead and
merge anyway") that should happen whether the advice message is
squelched out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy enough to do, and gives a more descriptive name to the
variable that is scoped in a more focused way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove this unreachable code. It was found by SunCC, it's found by a
non-fatal warning emitted by SunCC. It's one of the things it's more
vehement about than GCC & Clang.
It complains about a lot of other similarly unreachable code, e.g. a
BUG(...) without a "return", and a "return 0" after a long if/else,
both of whom have "return" statements. Those are also genuine
redundancies to a compiler, but arguably make the code a bit easier to
read & less fragile to maintain.
These return/break cases are just unnecessary however, and as seen
here the surrounding code just did a plain "return" without a "break"
already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 15b52a44 (compat-util: type-check parameters of no-op
replacement functions, 2020-08-06) turned a handful of no-op
C-preprocessor macros into static inline functions to give the
callers a better type checking for their parameters, it forgot
to return anything from the stubbed out setitimer() function,
even though the function was defined to return an int just like the
real thing.
Since the original C-preprocessor macro implementation was to just
turn the call to the function an empty statement, we know that the
existing callers do not check the return value from it, and it does
not matter what value we return. But it is safer to pretend that
the call succeeded by returning 0 than making it fail by returning -1
and clobbering errno with some value.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two "static inline" functions, both of which return void, call
strmap_remove() and tries to return the value it returns as their
return value, which is just bogus, as strmap_remove() returns void
itself. Call it in the void context and fall-thru the control to
the end instead.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0b4396f068, (git-p4: make python2.7 the oldest supported version,
2019-12-13) pointed out that git-p4 uses Python 2.7-or-later features
in the code.
In addition, git-p4 gained enough support for Python 3 from
6cec21a82f, (git-p4: encode/decode communication with p4 for
python3, 2019-12-13).
Let's update our documentation to reflect that fact.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test update.
* js/t5526-with-no-particular-primary-branch-name:
t5526: drop the prereq expecting the default branch name `main`
t5526: avoid depending on a specific default branch name
Tighten error checking in the codepath that responds to "git fetch".
* jk/check-config-parsing-error-in-upload-pack:
upload-pack: propagate return value from object filter config callback
Newer versions of xsltproc can assign IDs in HTML documents it
generates in a consistent manner. Use the feature to help format
HTML version of the user manual reproducibly.
* ae/doc-reproducible-html:
doc: make HTML manual reproducible
The glossary described a branch as an "active" line of development,
which is misleading---a stale and non-moving branch is still a
branch.
* so/glossary-branch-is-not-necessarily-active:
glossary: improve "branch" definition
"@" sometimes worked (e.g. "git push origin @:there") as a part of
a refspec element, but "git push origin @" did not work, which has
been corrected.
* fc/atmark-in-refspec:
refspec: make @ a synonym of HEAD
tests: push: trivial cleanup
tests: push: improve cleanup of HEAD tests
"git $cmd $args", when $cmd is not a recognised subcommand, by
default tries to see if $cmd is a typo of an existing subcommand
and optionally executes the corrected command if there is only one
possibility, depending on the setting of help.autocorrect; the
users can now disable the whole thing, including the cycles spent
to find a likely typo, by setting the configuration variable to
'never'.
* dd/help-autocorrect-never:
help.c: help.autocorrect=never means "do not compute suggestions"
Eventually we want to be omit the advice when we can fast-forward
in which case there is no reason to require the user to choose
between rebase or merge.
In order to do so, we need to delay giving the advice up to the
point where we can check if we can fast-forward or not.
Additionally, config_get_rebase() was probably never its true home.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would like to be able to make this check before the decision to
rebase is made in a future step. Besides, using a separate helper
makes the code easier to follow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation of the file system monitor extension to
describe version 2.
The format was extended to support opaque tokens in:
56c6910028 fsmonitor: change last update timestamp on the index_state to opaque token
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was implemented in the 'git multi-pack-index' command and
merged in 468b3221 (Merge branch 'ds/multi-pack-verify',
2018-10-10).
And there's no 'git midx' command.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give ample warning for users wishing to override Git's the fall-back
for an unconfigured `init.defaultBranch` (in case we decide to change it
in a future Git version), let's introduce some advice that is shown upon
`git init` when that value is not set.
Note: two test cases in Git's test suite want to verify that the
`stderr` output of `git init` is empty. It is now necessary to suppress
the advice, we now do that via the `init.defaultBranch` setting. While
not strictly necessary, we also set this to `false` in
`test_create_repo()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to introduce a message giving users running `git init` some
advice about `init.defaultBranch`. This will necessarily be done in
`repo_default_branch_name()`.
Not all code paths want to show that advice, though. In particular, the
`git clone` codepath _specifically_ asks for `init_db()` to be quiet,
via the `INIT_DB_QUIET` flag.
In preparation for showing users above-mentioned advice, let's change
the function signature of `get_default_branch_name()` to accept the
parameter `quiet`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one of the next commits, we would like to give users some advice
regarding the initial branch name, and how to modify it.
To that end, it would be good if `git branch -m <name>` worked in a
freshly initialized repository without any commits. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation does not mention any future plan to change 'master' to
other value. It is a good idea to document this, though.
Initial-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The focus here is on adding a path_msg() which will queue up
warning/conflict/notice messages about the merge for later processing,
storing these in a pathname -> strbuf map. It might seem like a big
change, but it really just is:
* declaration of necessary map with some comments
* initialization and recording of data
* a bunch of code to iterate over the map at print/free time
* at least one caller in order to avoid an error about having an
unused function (which we provide in the form of implementing
modify/delete conflict handling).
At this stage, it is probably not clear why I am opting for delayed
output processing. There are multiple reasons:
1. Merges are supposed to abort if they would overwrite dirty changes
in the working tree. We cannot correctly determine whether changes
would be overwritten until both rename detection has occurred and
full processing of entries with the renames has finalized.
Warning/conflict/notice messages come up at intermediate codepaths
along the way, so unless we want spurious conflict/warning messages
being printed when the merge will be aborted anyway, we need to
save these messages and only print them when relevant.
2. There can be multiple messages for a single path, and we want all
messages for a give path to appear together instead of having them
grouped by conflict/warning type. This was a problem already with
merge-recursive.c but became even more important due to the
splitting apart of conflict types as discussed in the commit
message for 1f3c9ba707 ("t6425: be more flexible with rename/delete
conflict messages", 2020-08-10)
3. Some callers might want to avoid showing the output in certain
cases, such as if the end result is a clean merge. Rebases have
typically done this.
4. Some callers might not want the output to go to stdout or even
stderr, but might want to do something else with it entirely.
For example, a --remerge-diff option to `git show` or `git log
-p` that remerges on the fly and diffs merge commits against the
remerged version would benefit from stdout/stderr not being
written to in the standard form.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplistic and weird-looking patch is here to facilitate future
patch submissions. Adding this stub allows rename detection code to
reference it in one patch series, while a separate patch series can
define the implementation, and then both series can merge cleanly and
work nicely together at that point.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b658536f59 ("merge-ort: add some high-level algorithm structure",
2020-10-27) added high-level structure of the ort merge algorithm. As
we have added more and more functions, that high-level structure has
been slightly obscured. Since functions are still grouped according to
this high-level structure, add comments denoting sections where all the
functions are specifically tied to a piece of the high-level structure.
This function groupings include a few sub-divisions of the original
high-level structure, including some sub-divisions that are yet to be
submitted. Each has (or will have) several functions all serving as
helpers to one or two main functions for each section.
As an added bonus, the comments will serve to provide a small textual
separation between nearby sections and allow the next three patch series
to be submitted independently and merge cleanly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field will be used in future patches to allow removal of paths from
opt->priv->paths.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field is not yet used, but will be used by both the rename handling
code, and the conflict type handling code in process_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of merge_finalize() into a new helper function,
clear_internal_opts(). This is a step to facilitate recursive merges,
as well as some future optimizations.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include blob.h for definition of blob_type, and commit-reach.h for
declarations of get_merge_bases() and in_merge_bases(). While none of
these are used yet, we want to avoid cross-dependencies in the next
three series of patches for merge-ort and merge them at the end; adding
these "#include"s now avoids textual conflicts.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After checkout(), the working tree has the appropriate contents, and the
index matches the working copy. That means that all unmodified and
cleanly merged files have correct index entries, but conflicted entries
need to be updated.
We do this by looping over the conflicted entries, marking the existing
index entry for the path with CE_REMOVE, adding new higher order staged
for the path at the end of the index (ignoring normal index sort order),
and then at the end of the loop removing the CE_REMOVED-marked cache
entries and sorting the index.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since merge-ort creates a tree for its output, when there are no
conflicts, updating the working tree and index is as simple as using the
unpack_trees() machinery with a twoway_merge (i.e. doing the equivalent
of a "checkout" operation).
If there were conflicts in the merge, then since the tree we created
included all the conflict markers, then using the unpack_trees machinery
in this manner will still update the working tree correctly. Further,
all index entries corresponding to cleanly merged files will also be
updated correctly by this procedure. Index entries corresponding to
conflicted entries will appear as though the user had run "git add -u"
after the merge to accept all files as-is with conflict markers.
Thus, after running unpack_trees(), there needs to be a separate step
for updating the entries in the index corresponding to conflicted files.
This will be the job for the function record_conflicted_index_entris(),
which will be implemented in a subsequent commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a basic implementation for merge_switch_to_result(), though
just in terms of a few new empty functions that will be defined in
subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
