* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Indent word-wrapped lines in commit display header
gitk: Comply with XDG base directory specification
gitk: Replace "next" and "prev" buttons with down and up arrows
gitk: chmod +x po2msg.sh
gitk: Update copyright dates
gitk: Add Bulgarian translation (304t)
gitk: Fix mistype
In the cases where the lines starting with Precedes:, Follows: and
Branches: in the commit display are long enough to be word-wrapped,
this adds a 1cm margin on the left of the wrapped lines, to make
the display more readable. Suggested by Stephen Rothwell.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add cross-references between the manpages for git-for-each-ref(1) and
git-show-ref(1).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write the gitk config data to $XDG_CONFIG_HOME/git/gitk ($HOME/.config/git/gitk
by default) in line with the XDG specification. This makes it consistent with
git which also follows the spec.
If $HOME/.gitk already exists use that for backward compatibility, so only new
installations are affected.
Signed-off-by: Astril Hayato <astrilhayato@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Users often find that "next" and "prev" do the opposite of what they
expect. For example, "next" moves to the next match down the list, but
that is almost always backwards in time. Replacing the text with arrows
makes it clear where the buttons will take the user.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The Makefile only runs it using tclsh, but because the fallback po2msg
script has the usual tcl preamble starting with #!/bin/sh it can also
be run directly.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The Makefile only runs po/po2msg.sh using tclsh, but because the
script has the usual tcl preamble starting with #!/bin/sh it can also
be run directly.
The Windows git-gui wrapper is usable in-place for the same reason.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Since 918dbf58, git-gui crashes if started with Tk 8.4. The reason is that
tk < 8.5 does not support -stretch option for panedwindow.
Without the option it's not possible to properly expand the right half -
the commit area is expanded, while desired behavior is to expand the diff
area. So the whole feature should be disabled with Tk
version less than 8.5.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
"submodule.*.update=checkout", when propagated from .gitmodules to
.git/config, turned into a "submodule.*.update=none", which did not
make much sense.
* fp/submodule-checkout-mode:
git-submodule.sh: 'checkout' is a valid update mode
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Finishing touches so that an expected error message will not leak to
the UI.
* jk/pull-rebase-using-fork-point:
pull: suppress error when no remoteref is found
Commit 48059e4 (pull: use merge-base --fork-point when appropriate,
2013-12-08) incorrectly assumes that get_remote_merge_branch will either
yield a non-empty string or return an error, but there are circumstances
where it will yield an empty string.
The previous code then invoked git-rev-list with no arguments, which
results in an error suppressed by redirecting stderr to /dev/null. Now
we invoke git-merge-base with an empty branch name, which also results
in an error. Suppress this in the same way.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion serf backend in versions 1.8.5 and below has a bug(*) that the
function creating the descriptor of a file change -- add_file() --
doesn't make a copy of its third argument when storing it on the
returned descriptor. As a result, by the time this field is used (in
transactions of file copying or renaming) it may well be released, and
the memory reused.
One of its possible manifestations is the svn assertion triggering on an
invalid path, with a message
svn_fspath__skip_ancestor: Assertion
`svn_fspath__is_canonical(child_fspath)' failed.
This patch works around this bug, by storing the value to be passed as
the third argument to add_file() in a local variable with the same scope
as the file change descriptor, making sure their lifetime is the same.
* [ew: fixed in Subversion r1553376 as noted by Jonathan Nieder]
Cc: Benjamin Pabst <benjamin.pabst85@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Finishing touches to avoid casting unnecessary detail in stone.
* sb/diff-orderfile-config:
diff test: reading a directory as a file need not error out
* mh/shorten-unambigous-ref:
shorten_unambiguous_ref(): tighten up pointer arithmetic
gen_scanf_fmt(): delete function and use snprintf() instead
shorten_unambiguous_ref(): introduce a new local variable
With a submodule that was initialized in an old fashioned way
without gitlinks, switching branches in the superproject between
the one with and without the submodule may leave the submodule
working tree with its embedded repository behind, as there may be
unexpendable state there. Document and warn users about this.
* jl/submodule-mv-checkout-caveat:
rm: better document side effects when removing a submodule
mv: better document side effects when moving a submodule
The bash/zsh completion code did not know about format.coverLetter
among many format.* configuration variables.
* rr/completion-format-coverletter:
completion: complete format.coverLetter
The implementation of 'git stash $cmd "stash@{...}"' did not quote
the stash argument properly and left it split at IFS whitespace.
* ow/stash-with-ifs:
stash: handle specifying stashes with $IFS
Just like we give a reasonable default for "less" via the LESS
environment variable, specify a reasonable default for "lv" via the
"LV" environment variable when spawning the pager.
* jn/pager-lv-default-env:
pager: set LV=-c alongside LESS=FRSX
When parsing a 40-hex string into the object name, the string is
checked to see if it can be interpreted as a ref so that a warning
can be given for ambiguity. The code kicked in even when the
core.warnambiguousrefs is set to false to squelch this warning, in
which case the cycles spent to look at the ref namespace were an
expensive no-op, as the result was discarded without being used.
* br/sha1-name-40-hex-no-disambiguation:
sha1_name: don't resolve refs when core.warnambiguousrefs is false
The "--[no-]informative-errors" options to "git daemon" were parsed
a bit too loosely, allowing any other string after these option
names.
* nd/daemon-informative-errors-typofix:
daemon: be strict at parsing parameters --[no-]informative-errors
A "gc" process running as a different user should be able to stop a
new "gc" process from starting.
* km/gc-eperm:
gc: notice gc processes run by other users
"git mv A B/", when B does not exist as a directory, should error
out, but it didn't.
* mm/mv-file-to-no-such-dir-with-slash:
mv: let 'git mv file no-such-dir/' error out on Windows, too
mv: let 'git mv file no-such-dir/' error out
"git rev-parse <revs> -- <paths>" did not implement the usual
disambiguation rules the commands in the "git log" family used in
the same way.
* jk/rev-parse-double-dashes:
rev-parse: be more careful with munging arguments
rev-parse: correctly diagnose revision errors before "--"
"git cat-file --batch=", an admittedly useless command, did not
behave very well.
* jk/cat-file-regression-fix:
cat-file: handle --batch format with missing type/size
cat-file: pass expand_data to print_object_or_die
Commit 43eb920 switched one of the sub-repository in this
test to matching to prepare for a world where the default
becomes "simple". However, the main repository needs a
similar change.
We did not notice any test failure when merged with b2ed944
(push: switch default from "matching" to "simple", 2013-01-04)
because t5531.6 is trying to provoke a failure of "git push"
due to a submodule check. When combined with b2ed944 the
push still fails, but for the wrong reason (because our
upstream setup does not exist, not because of the submodule).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no guarantee that strbuf_read_file must error out for
directories. On some operating systems (e.g., Debian GNU/kFreeBSD
wheezy), reading a directory gives its raw content:
$ head -c5 < / | cat -A
^AM-|^_^@^L$
As a result, 'git diff -O/' succeeds instead of erroring out on
these systems, causing t4056.5 "orderfile is a directory" to fail.
On some weird OS it might even make sense to pass a directory to the
-O option and this is not a common user mistake that needs catching.
Remove the test.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit c57f628 (mv: let 'git mv file no-such-dir/' error out)
relies on that rename("file", "no-such-dir/") fails if the directory does not
exist (note the trailing slash). This does not work as expected on Windows:
This rename() call does not fail, but renames "file" to "no-such-dir" (not to
"no-such-dir/file"). Insert an explicit check for this case to force an error.
This changes the error message from
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
to
$ git mv file no-such-dir/
fatal: destination directory does not exist, source=file, destination=no-such-dir/
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git help $cmd" unnecessarily enumerated potential command names
from the filesystem, even when $cmd is known to be a built-in.
Ideas for further optimization, primarily by killing the use of
is_in_cmdlist(), were suggested in the discussion, but they can
come as follow-ups on top of this series.
* ss/builtin-cleanup:
builtin/help.c: speed up is_git_command() by checking for builtin commands first
builtin/help.c: call load_command_list() only when it is needed
git.c: consistently use the term "builtin" instead of "internal command"
Update the way the user-manual is formatted via AsciiDoc to save
trees.
* ta/format-user-manual-as-an-article:
user-manual: improve html and pdf formatting