Enhance the existing pointer motion and button event tests to
additionally verify the event timestamps. This requires updating the
weston-test protocol to support passing motion and button event
timestamps.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This doesn't attach a buffer to the surface. This is needed for the
next commit, where we have a test case with a surface that doesn't
have a buffer attached.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
buffer-count was introduced in line with a Mesa change which forced
an earlier block on frame events to try to enforce double-buffering
where available.
The Mesa change has since been reverted (Mesa commit 9ca6711faa), as
this had unpleasant interactions with buffer_age in particular, so this
test is no longer valid.
Additionally, it only worked on backends which initialised EGL (not
headless-backend, where tests generally run), which can be flaky due to
initialisation races. Not only that, but on the DRM backend, we can
legitimately enter triple-buffering due to promoting the surface to a
hardware plane, skipping GPU composition.
In light of all this, just remove the test.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Useful for pointing out where the image comparisons fail.
Internal-screenshot-test is modified to save the visualization if the
test fails.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Screenshooting does not involve creating a wl_surface, so using struct
surface is superfluous.
Return a struct buffer instead. It could have been just a
pixman_image_t, but setting up proper destruction would be a bit more
work. Should not hurt to keep the wl_buffer around until the user is
ready to free the image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites write_surface_as_png() into write_image_as_png(), which
operates on a pixman_image_t instead of a struct surface.
This is part of the migration to use pixman_image_t everywhere without
superfluous parameters/members.
Now the image saving handles more than just ARGB32 format, presumably.
At least it does not assume everything is always ARGB32.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites load_surface_from_png() to load_image_from_png(), to
return a pixman_image_t instead of a struct surface.
A loaded image has no need for wl_buffer or wl_surface or any of the
associated attributes. This is part of unifying to make everything use
pixman_image_t.
cairo_surface_flush() is added, because Cairo documentation for
cairo_image_surface_get_data() says you have to flush after drawing,
before using the data. It is unclear if loading a PNG counts as drawing,
so stay on the safe side.
load_image_from_png() now pays attention to the pixel format returned by
Cairo, which seems to come out as CAIRO_FORMAT_RGB24 in
internal-screenshot-test, not as CAIRO_FORMAT_ARGB32 as expected. I do
not know if Cairo actually guarantees the x8/a8 channel to be 0xff for
RGB24, but better to not trust it. Therefore the image is explicitly
converted to a8r8g8b8 as needed. This also adds support for loading A8
and RGB16_565 images, provided that Cairo delivers them.
The cairo surface is now wrapped directly into a pixman_image_t. If the
pixel format conversion is not needed, this eliminates a copy of the
image data. The Cairo surface will get automatically destroyed with the
Pixman image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
check_surfaces_geometry() is removed as it was not used by anything, and
unlikely would be.
check_surfaces_equal() is merged into check_surfaces_match_in_clip(),
passing a NULL clip means to compare whole images.
check_surfaces_match_in_clip() is converted to work on pixman_image_t
instead of struct surface. The function is only concerned about
comparing images in memory, and does not care about a wl_buffer or a
wl_surface.
The verbosity of image comparisons is greatly reduced. An image mismatch
no longer prints a flood of raw pixel values. This will be replaced
later with a function writing out an error image instead.
Degenerate comparisons are no longer accepted, be that clip outside
images or zero area. Those are an indication of a programmer error.
The pixel format assumptions are made more visible in the code.
A new internal helper image_check_get_roi() computes and verifies the
area to be compared. Image iterator helper makes it simpler to write
manual pixel-poking loops.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
No users remain outside the file. This will allow to fix the assumptions
in the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We are growing more tests that need to handle buffers, both just images
and wl_buffers. Particularly the screenshooting facility needs these.
Currently everything is in struct surface, which contains more than we
need. It is a bit messy.
Create a new struct buffer to encapsulate the image representation, the
wl_buffer, and enough information to tear it all down (munmap) so we
don't have to leak everything. Some tests might start doing things in
loops, and leaking would accumulate.
Instead of inventing our own image representation, use pixman_image_t.
It is a well-tested library worth using, and we already rely on it in
other places.
This makes the tests depend on Pixman, which requires the fix for
building buffer-count, which would otherwise not find pixman.h.
The new create_shm_buffer_a8r8g8b8() creates an image with an explicit
format, and pixman_image_t keeps track of it. And stride and size and
data. This implementation is still a little hacky due to calling
create_shm_buffer().
A very new thing is buffer_destroy(). Previously we didn't really free
any buffers. It is not a problem when the process will exit soon anyway,
but it may become a problem if tests start iterating things.
Manual memset() on a image is converted to a pixman action, just to show
how to do it properly with pixman.
Stride and pixel format assumptions still linger all around, but those
are for another patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Direct fail_on_null calls now produce output like:
[weston-info] clients/weston-info.c:714: out of memory
xmalloc, et al produce output on failure like:
[weston-info] out of memory (-1)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
These routines provide test cases an ability to capture screen images
for rendering verification.
This commit is a no-change refactoring, except for making the routines
non-static. Makefile rules are also updated; most notably, this links
test clients against the cairo libraries now.
v2: Fix pointer code styling, suggested in review
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This seems like a good idea for consistency that the protocol header
is included for any protocols used by the code. This also means the
code will compile with headers generated by wayland-scanner -c.
Fixed to use angle brackets.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Minor refactoring to simplify initial sanity checks of surfaces.
Conceivably useful for other basic checking.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Introduce helper routines for testing surfaces against specific
conditions. These allow tests to validate screen captures as displaying
the correct rendering results.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
A more descriptive name to not be confused with create_client().
v2: Rebased: fix also devices-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Introduce a new helper create_client(), which creates and initializes
the client struct, but does not create a wl_surface.
This will be useful for ivi-shell tests.
v2: Rebased, and restored the dependency to weston-test.so, since seat
handling requires it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Let the client bind to wl_touch. Since we have our own seat,
we know that the compositor will have wl_touch capability.
v2: rebased due to changes in previous commit
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When running on different backends, we don't know what devices
the backend provides. Create new seat for tests that contains
everything what we need. This is also first step in adding
touch support for tests.
v2: do not add devices in wl_seat.name event. Collect first
all wl_seats and then pick the one that we need and
destroy the rest. The effect is the same, but this code
is better understandable.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We used hard-coded version 1 for all globals. For testing
newer methods and events we need use the current version
of global. This patch fixes this and adds missing
event handlers (for the events that were added in
versions > 1)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
wayland-test isn't and will never be wayland protocol, it's weston internal.
Renamed wayland-test to weston-test, and wl_test to weston_test.
Also added a Big Fat Warning to the description of weston_test to try to
keep people from thinking it's a good idea to use some of these functions
outside of testing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This skips the test when running on the headless backend.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
(Presumably) Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Since this is an inlined function, move it to a common header file.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
With expect_protocol_error, we need a possibility to wait for a frame
without aborting the test when wl_display_dispatch returns -1;
This patch adds function frame_callback_wait_nofail that only
returns 1 or 0 (instead of aborting on error).
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
This function checks if a particular protocol error came in wire.
It's usefull in the cases where we hitherto used FAIL_TEST.
The problem with FAIL_TEST is that *any* assert will pass the test,
but we want only some asserts to pass the test (i. e. we don't
want the test to pass when it, for example, can't connect to display).
FAIL_TESTs are good only for sanity testing.
The expect_protocol_error allows us to turn all FAIL_TESTs to TESTs
as will be introduced in following patches.
v2: fixed white-space error and a mistake in comment
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
There was an issue recently in screen-share.c where config.h was not
being included, resulting in the wrong definition for off_t being used on
32 bit systems. I checked and I don't think this problem is happening
elsewhere, but to help avoid this sort of problem in the future, I went
through and made sure that config.h is included first whenever system
headers are included.
The config.h header should be included before any system headers, failing
to do this can result in the wrong type sizes being defined on certain
systems, e.g. off_t from sys/types.h
Signed-off-by: Andrew Wedgbury <andrew.wedgbury@realvnc.com>
This adds a test that tries to simulate a simple game loop that would
be like this:
while (1) {
draw_something();
eglSwapBuffers();
}
In this case the test is relying on eglSwapBuffers to throttle to a
sensible frame rate.
The test then verifies that only 2 EGL buffers are used. This is done
via a new request and event in the wayland-test protocol.
Currently this causes 3 buffers to be created because the release
event generated by the swap buffers is not processed by Mesa until it
blocks for the frame complete event in the next swap buffers call, but
that is too late.
This can be fixed in Mesa by issuing a sync request after the swap
buffers and blocking on it before deciding whether to allocate a new
buffer.
To avoid duplicating the code for setting and waiting for a frame
callback, add helpers for it.
Convert move_client() to use the new helpers.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add a macro that wraps wl_display_roundtrip() and check for errors. It
is a macro, so that the assert would show the relevant file and line
number.
This will also catch protocol errors, that would go unnoticed otherwise.
All roundtrips in tests are replaced with the check.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remaining use case was when we move the pointer. This doesn't change
geometry so we can just use a wl_display_roundtrip() to make sure
we get the request to the server and receive the resulting events.
This adds a weston-test-runner for the weston test extension and
some weston test client helper methods.
Converted keyboard-test to use the new test interface, runner,
and helper methods.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56822
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
