If the target mount point is an automount, checking it for writeability
without triggering it first is iffy and yields different results based
on kernel version:
~# systemd-run --wait --pipe -p ProtectSystem=yes bash -xec 'uname -r; mount -l | grep boot; test ! -w /boot'
Running as unit: run-u36.service; invocation ID: f948ff4f3c8e4bcfba364ead94bd0ad9
+ uname -r
4.18.0-529.el8.x86_64
+ mount -l
+ grep boot
systemd-1 on /boot type autofs (rw,relatime,fd=43,pgrp=1,timeout=120,minproto=5,maxproto=5,direct,pipe_ino=356096)
+ test '!' -w /boot
Finished with result: exit-code
Main processes terminated with: code=exited/status=1
~# systemd-run --wait --pipe -p ProtectSystem=yes bash -xec 'uname -r; mount -l | grep boot; test ! -w /boot'
Running as unit: run-u274.service; invocation ID: ccc53ed63c3249348cf714f97a3a7026
+ uname -r
6.6.7-arch1-1
+ mount -l
+ grep boot
systemd-1 on /boot type autofs (rw,relatime,fd=95,pgrp=1,timeout=120,minproto=5,maxproto=5,direct,pipe_ino=730583)
+ test '!' -w /boot
Finished with result: success
Main processes terminated with: code=exited/status=0
One solution would be to use /boot/ instead of just /boot, which triggers
the automount during the check, but in that case the mount would happen
_after_ we apply the ProtectSystem= stuff, so the mount point would
be unexpectedly writable:
~# systemd-run --wait --pipe -p ProtectSystem=yes bash -xec 'uname -r; mount -l | grep boot; test ! -w /boot/ || mount -l | grep boot'
Running as unit: run-u282.service; invocation ID: 2154f6b4cbd34ddeb3e246cb7c991918
+ uname -r
6.6.7-arch1-1
+ mount -l
+ grep boot
systemd-1 on /boot type autofs (rw,relatime,fd=95,pgrp=1,timeout=120,minproto=5,maxproto=5,direct,pipe_ino=730583)
+ test '!' -w /boot/
+ mount -l
+ grep boot
systemd-1 on /boot type autofs (rw,relatime,fd=95,pgrp=1,timeout=120,minproto=5,maxproto=5,direct,pipe_ino=730583)
/dev/vda2 on /boot type vfat (rw,nosuid,nodev,noexec,relatime,nosymfollow,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro)
Let's just trigger the (possible) automounts explicitly before we do any
checks to avoid all this stuff.
Also, when at it, check that ProtectSystem=yes|full correctly protects
the ESP mount as well.
Follow-up for 97bbb9cfbd.
Otherwise we might occasionally hit the start rate limit, as we restart
the service a bunch of times:
[ 3702.280886] testsuite-75.sh[1135]: + tee /tmp/tmp.wUL8bkJwrt
[ 3702.283684] testsuite-75.sh[1135]: {}
[ 3702.284254] testsuite-75.sh[46]: + restart_resolved
[ 3702.284302] testsuite-75.sh[46]: + systemctl stop systemd-resolved.service
[ 3702.310678] testsuite-75.sh[1140]: + systemctl is-failed systemd-resolved.service
[ 3702.316766] testsuite-75.sh[1141]: inactive
[ 3702.316998] testsuite-75.sh[46]: + systemctl start systemd-resolved.service
[ 3702.322315] systemd[1]: systemd-resolved.service: Start request repeated too quickly.
[ 3702.322343] systemd[1]: systemd-resolved.service: Failed with result 'start-limit-hit'.
[ 3702.322609] systemd[1]: Failed to start systemd-resolved.service - Network Name Resolution.
[ 3702.323619] systemctl[1142]: Job for systemd-resolved.service failed.
[ 3702.323839] systemctl[1142]: See "systemctl status systemd-resolved.service" and "journalctl -xeu systemd-resolved.service" for details.
[ 3702.325035] systemd[1]: testsuite-75.service: Failed with result 'exit-code'.
[ 3702.325391] systemd[1]: Failed to start testsuite-75.service - Tests for systemd-resolved.
Follow-up for b1384db11b and 6ef512c0bb.
Users can currently pick specific versions of NIC naming, but that
does not guarantee that NIC names won't change after the kernel adds
a new sysfs attribute.
This patch allows for an allow/deny list of sysfs attributes
that could be used when composing the name.
These lists can be supplied as an hwdb entry in the form of
/etc/udev/hwdb.d/50-net-naming-allowlist.hwdb
net:naming:drvirtio_net
ID_NET_NAME_ALLOW=0
ID_NET_NAME_ALLOW_ACPI_INDEX=1
ID_NET_NAME_ALLOW_ADDR_ASSIGN_TYPE=1
ID_NET_NAME_ALLOW_ADDRESS=1
ID_NET_NAME_ALLOW_ARI_ENABLED=1
ID_NET_NAME_ALLOW_DEV_PORT=1
ID_NET_NAME_ALLOW_FUNCTION_ID=1
ID_NET_NAME_ALLOW_IFLINK=1
ID_NET_NAME_ALLOW_INDEX=1
ID_NET_NAME_ALLOW_LABEL=1
ID_NET_NAME_ALLOW_PHYS_PORT_NAME=1
ID_NET_NAME_ALLOW_TYPE=1
We already refuse the other two cursor-related options (--cursor= and
--after-cursor=) with --since=, so let's do the same with
--cursor-file=.
Closes: #20523
Regardless of whether a vc path is passed, the behavior of
systemd-vconsole-setup wasn't ideal when either the passed vc or /dev/tty1 was
in graphics mode.
When a vc in graphics mode was passed, no message was emitted despite the fact
that the font settings couldn't be applied. The previous code might have
assumed that setfont(8) would throw a warning but that's not case.
When no argument was passed, systemd-vconsole-setup was supposed to
automatically select a valid tty, init it and copy the font setting to the
remaining ttys. However if the selected virtual console was in KD_GRAPHICS mode
the initialization of the font failed not only for the selected source vc but
for all of them.
This patch enables IFNAME_VALID_ALTERNATIVE for checks guarding the
parsing of RestrictNetworkInterfaces=.
The underlying implementation for this option already supports
altnames.
There's a race condition where the EXIT_STATUS= message we send
just before shutting down the VM doesn't arrive on the host,
presumably because the VM is shut down before the kernel has had a
chance to forward the message to the host.
Since there's no obvious way to wait until the message has been
flushed to the host, let's send the message before we execute the
final sync() instead of after executing the final sync(). In my
testing, this seems to either guarantee the message is sent or
introduces sufficient delay that the kernel always has time to flush
its socket buffers to the host.
