qemu/hw/arm
Heyi Guo e04c13cdcf hw/arm/acpi: enable SHPC native hot plug
After the introduction of generic PCIe root port and PCIe-PCI bridge,
we will also have SHPC controller on ARM, so just enable SHPC native
hot plug.

Also update tests/data/acpi/virt/DSDT* to pass "make check".

Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:35 +00:00
..
allwinner-a10.c
armsse.c
armv7m.c
aspeed.c aspeed: Add support for the tacoma-bmc board 2019-12-16 10:46:34 +00:00
aspeed_ast2600.c aspeed: Change the "nic" property definition 2019-12-16 10:46:34 +00:00
aspeed_soc.c aspeed: Change the "scu" property definition 2019-12-16 10:46:34 +00:00
bcm2835_peripherals.c hw/arm/bcm2835_peripherals: Use the SYS_timer 2019-10-25 13:09:27 +01:00
bcm2836.c hw/arm/bcm2836: Rename cpus[] as cpu[].core 2019-10-25 13:09:27 +01:00
boot.c hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine 2019-11-11 13:44:16 +00:00
collie.c hw/arm/collie: Create the RAM in the board 2019-10-22 17:44:01 +01:00
cubieboard.c
digic.c
digic_boards.c hw/arm/digic4: Inline digic4_board_setup_ram() function 2019-10-22 17:44:01 +01:00
exynos4_boards.c
exynos4210.c hw/arm/exynos4210: Use the Samsung s3c SDHCI controller 2019-10-22 17:44:00 +01:00
fsl-imx6.c
fsl-imx6ul.c
fsl-imx7.c
fsl-imx25.c
fsl-imx31.c
gumstix.c
highbank.c hw/arm/highbank: Use AddressSpace when using write_secondary_boot() 2019-10-25 13:09:27 +01:00
imx25_pdk.c
integratorcp.c
Kconfig
kzm.c
mainstone.c
Makefile.objs aspeed/soc: Add AST2600 support 2019-10-15 18:09:05 +01:00
mcimx6ul-evk.c
mcimx7d-sabre.c
microbit.c
mps2-tz.c hw/arm/mps2: Use the IEC binary prefix definitions 2019-10-22 17:44:00 +01:00
mps2.c hw/arm/mps2: Use the IEC binary prefix definitions 2019-10-22 17:44:00 +01:00
msf2-soc.c
msf2-som.c
musca.c hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory 2019-10-24 20:10:27 +02:00
musicpal.c
netduino2.c
nrf51_soc.c
nseries.c hw/arm/omap2: Create the RAM in the board 2019-10-22 17:44:01 +01:00
omap1.c hw/arm/omap1: Create the RAM in the board 2019-10-22 17:44:01 +01:00
omap2.c hw/arm/omap2: Create the RAM in the board 2019-10-22 17:44:01 +01:00
omap_sx1.c hw/arm/omap1: Create the RAM in the board 2019-10-22 17:44:01 +01:00
palm.c hw/arm/omap1: Create the RAM in the board 2019-10-22 17:44:01 +01:00
pxa2xx.c
pxa2xx_gpio.c
pxa2xx_pic.c
raspi.c hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot 2019-10-25 13:09:27 +01:00
realview.c
sabrelite.c
sbsa-ref.c hw/arm/sbsa-ref: Simplify by moving the gic in the machine state 2019-12-16 10:46:35 +00:00
smmu-common.c
smmu-internal.h
smmuv3-internal.h
smmuv3.c
spitz.c
stellaris.c
stm32f205_soc.c
strongarm.c hw/arm/collie: Create the RAM in the board 2019-10-22 17:44:01 +01:00
strongarm.h hw/arm/collie: Create the RAM in the board 2019-10-22 17:44:01 +01:00
sysbus-fdt.c
tosa.c
trace-events
versatilepb.c
vexpress.c
virt-acpi-build.c hw/arm/acpi: enable SHPC native hot plug 2019-12-16 10:46:35 +00:00
virt.c virtio-blk: advertise F_WCE (F_FLUSH) if F_CONFIG_WCE is advertised 2019-12-13 11:22:06 +00:00
xilinx_zynq.c hw/arm/xilinx_zynq: Use the IEC binary prefix definitions 2019-10-22 17:44:00 +01:00
xlnx-versal-virt.c
xlnx-versal.c hw/arm: versal: Add the CRP as unimplemented 2019-11-26 13:55:36 +00:00
xlnx-zcu102.c
xlnx-zynqmp.c
z2.c