qemu/hw/slavio_misc.c
Alexander Graf 2507c12ab0 Add endianness as io mem parameter
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00

500 lines
12 KiB
C

/*
* QEMU Sparc SLAVIO aux io port emulation
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "sysemu.h"
#include "sysbus.h"
#include "trace.h"
/*
* This is the auxio port, chip control and system control part of
* chip STP2001 (Slave I/O), also produced as NCR89C105. See
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
*
* This also includes the PMC CPU idle controller.
*/
typedef struct MiscState {
SysBusDevice busdev;
qemu_irq irq;
uint32_t dummy;
uint8_t config;
uint8_t aux1, aux2;
uint8_t diag, mctrl;
uint8_t sysctrl;
uint16_t leds;
qemu_irq fdc_tc;
} MiscState;
typedef struct APCState {
SysBusDevice busdev;
qemu_irq cpu_halt;
} APCState;
#define MISC_SIZE 1
#define SYSCTRL_SIZE 4
#define AUX1_TC 0x02
#define AUX2_PWROFF 0x01
#define AUX2_PWRINTCLR 0x02
#define AUX2_PWRFAIL 0x20
#define CFG_PWRINTEN 0x08
#define SYS_RESET 0x01
#define SYS_RESETSTAT 0x02
static void slavio_misc_update_irq(void *opaque)
{
MiscState *s = opaque;
if ((s->aux2 & AUX2_PWRFAIL) && (s->config & CFG_PWRINTEN)) {
trace_slavio_misc_update_irq_raise();
qemu_irq_raise(s->irq);
} else {
trace_slavio_misc_update_irq_lower();
qemu_irq_lower(s->irq);
}
}
static void slavio_misc_reset(DeviceState *d)
{
MiscState *s = container_of(d, MiscState, busdev.qdev);
// Diagnostic and system control registers not cleared in reset
s->config = s->aux1 = s->aux2 = s->mctrl = 0;
}
static void slavio_set_power_fail(void *opaque, int irq, int power_failing)
{
MiscState *s = opaque;
trace_slavio_set_power_fail(power_failing, s->config);
if (power_failing && (s->config & CFG_PWRINTEN)) {
s->aux2 |= AUX2_PWRFAIL;
} else {
s->aux2 &= ~AUX2_PWRFAIL;
}
slavio_misc_update_irq(s);
}
static void slavio_cfg_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
trace_slavio_cfg_mem_writeb(val & 0xff);
s->config = val & 0xff;
slavio_misc_update_irq(s);
}
static uint32_t slavio_cfg_mem_readb(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
ret = s->config;
trace_slavio_cfg_mem_readb(ret);
return ret;
}
static CPUReadMemoryFunc * const slavio_cfg_mem_read[3] = {
slavio_cfg_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc * const slavio_cfg_mem_write[3] = {
slavio_cfg_mem_writeb,
NULL,
NULL,
};
static void slavio_diag_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
trace_slavio_diag_mem_writeb(val & 0xff);
s->diag = val & 0xff;
}
static uint32_t slavio_diag_mem_readb(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
ret = s->diag;
trace_slavio_diag_mem_readb(ret);
return ret;
}
static CPUReadMemoryFunc * const slavio_diag_mem_read[3] = {
slavio_diag_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc * const slavio_diag_mem_write[3] = {
slavio_diag_mem_writeb,
NULL,
NULL,
};
static void slavio_mdm_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
trace_slavio_mdm_mem_writeb(val & 0xff);
s->mctrl = val & 0xff;
}
static uint32_t slavio_mdm_mem_readb(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
ret = s->mctrl;
trace_slavio_mdm_mem_readb(ret);
return ret;
}
static CPUReadMemoryFunc * const slavio_mdm_mem_read[3] = {
slavio_mdm_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc * const slavio_mdm_mem_write[3] = {
slavio_mdm_mem_writeb,
NULL,
NULL,
};
static void slavio_aux1_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
trace_slavio_aux1_mem_writeb(val & 0xff);
if (val & AUX1_TC) {
// Send a pulse to floppy terminal count line
if (s->fdc_tc) {
qemu_irq_raise(s->fdc_tc);
qemu_irq_lower(s->fdc_tc);
}
val &= ~AUX1_TC;
}
s->aux1 = val & 0xff;
}
static uint32_t slavio_aux1_mem_readb(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
ret = s->aux1;
trace_slavio_aux1_mem_readb(ret);
return ret;
}
static CPUReadMemoryFunc * const slavio_aux1_mem_read[3] = {
slavio_aux1_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc * const slavio_aux1_mem_write[3] = {
slavio_aux1_mem_writeb,
NULL,
NULL,
};
static void slavio_aux2_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
val &= AUX2_PWRINTCLR | AUX2_PWROFF;
trace_slavio_aux2_mem_writeb(val & 0xff);
val |= s->aux2 & AUX2_PWRFAIL;
if (val & AUX2_PWRINTCLR) // Clear Power Fail int
val &= AUX2_PWROFF;
s->aux2 = val;
if (val & AUX2_PWROFF)
qemu_system_shutdown_request();
slavio_misc_update_irq(s);
}
static uint32_t slavio_aux2_mem_readb(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
ret = s->aux2;
trace_slavio_aux2_mem_readb(ret);
return ret;
}
static CPUReadMemoryFunc * const slavio_aux2_mem_read[3] = {
slavio_aux2_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc * const slavio_aux2_mem_write[3] = {
slavio_aux2_mem_writeb,
NULL,
NULL,
};
static void apc_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
{
APCState *s = opaque;
trace_apc_mem_writeb(val & 0xff);
qemu_irq_raise(s->cpu_halt);
}
static uint32_t apc_mem_readb(void *opaque, target_phys_addr_t addr)
{
uint32_t ret = 0;
trace_apc_mem_readb(ret);
return ret;
}
static CPUReadMemoryFunc * const apc_mem_read[3] = {
apc_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc * const apc_mem_write[3] = {
apc_mem_writeb,
NULL,
NULL,
};
static uint32_t slavio_sysctrl_mem_readl(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
switch (addr) {
case 0:
ret = s->sysctrl;
break;
default:
break;
}
trace_slavio_sysctrl_mem_readl(ret);
return ret;
}
static void slavio_sysctrl_mem_writel(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
trace_slavio_sysctrl_mem_writel(val);
switch (addr) {
case 0:
if (val & SYS_RESET) {
s->sysctrl = SYS_RESETSTAT;
qemu_system_reset_request();
}
break;
default:
break;
}
}
static CPUReadMemoryFunc * const slavio_sysctrl_mem_read[3] = {
NULL,
NULL,
slavio_sysctrl_mem_readl,
};
static CPUWriteMemoryFunc * const slavio_sysctrl_mem_write[3] = {
NULL,
NULL,
slavio_sysctrl_mem_writel,
};
static uint32_t slavio_led_mem_readw(void *opaque, target_phys_addr_t addr)
{
MiscState *s = opaque;
uint32_t ret = 0;
switch (addr) {
case 0:
ret = s->leds;
break;
default:
break;
}
trace_slavio_led_mem_readw(ret);
return ret;
}
static void slavio_led_mem_writew(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
MiscState *s = opaque;
trace_slavio_led_mem_readw(val & 0xffff);
switch (addr) {
case 0:
s->leds = val;
break;
default:
break;
}
}
static CPUReadMemoryFunc * const slavio_led_mem_read[3] = {
NULL,
slavio_led_mem_readw,
NULL,
};
static CPUWriteMemoryFunc * const slavio_led_mem_write[3] = {
NULL,
slavio_led_mem_writew,
NULL,
};
static const VMStateDescription vmstate_misc = {
.name ="slavio_misc",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
VMSTATE_UINT32(dummy, MiscState),
VMSTATE_UINT8(config, MiscState),
VMSTATE_UINT8(aux1, MiscState),
VMSTATE_UINT8(aux2, MiscState),
VMSTATE_UINT8(diag, MiscState),
VMSTATE_UINT8(mctrl, MiscState),
VMSTATE_UINT8(sysctrl, MiscState),
VMSTATE_END_OF_LIST()
}
};
static int apc_init1(SysBusDevice *dev)
{
APCState *s = FROM_SYSBUS(APCState, dev);
int io;
sysbus_init_irq(dev, &s->cpu_halt);
/* Power management (APC) XXX: not a Slavio device */
io = cpu_register_io_memory(apc_mem_read, apc_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
return 0;
}
static int slavio_misc_init1(SysBusDevice *dev)
{
MiscState *s = FROM_SYSBUS(MiscState, dev);
int io;
sysbus_init_irq(dev, &s->irq);
sysbus_init_irq(dev, &s->fdc_tc);
/* 8 bit registers */
/* Slavio control */
io = cpu_register_io_memory(slavio_cfg_mem_read,
slavio_cfg_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
/* Diagnostics */
io = cpu_register_io_memory(slavio_diag_mem_read,
slavio_diag_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
/* Modem control */
io = cpu_register_io_memory(slavio_mdm_mem_read,
slavio_mdm_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
/* 16 bit registers */
/* ss600mp diag LEDs */
io = cpu_register_io_memory(slavio_led_mem_read,
slavio_led_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
/* 32 bit registers */
/* System control */
io = cpu_register_io_memory(slavio_sysctrl_mem_read,
slavio_sysctrl_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, SYSCTRL_SIZE, io);
/* AUX 1 (Misc System Functions) */
io = cpu_register_io_memory(slavio_aux1_mem_read,
slavio_aux1_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
/* AUX 2 (Software Powerdown Control) */
io = cpu_register_io_memory(slavio_aux2_mem_read,
slavio_aux2_mem_write, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, MISC_SIZE, io);
qdev_init_gpio_in(&dev->qdev, slavio_set_power_fail, 1);
return 0;
}
static SysBusDeviceInfo slavio_misc_info = {
.init = slavio_misc_init1,
.qdev.name = "slavio_misc",
.qdev.size = sizeof(MiscState),
.qdev.vmsd = &vmstate_misc,
.qdev.reset = slavio_misc_reset,
};
static SysBusDeviceInfo apc_info = {
.init = apc_init1,
.qdev.name = "apc",
.qdev.size = sizeof(MiscState),
};
static void slavio_misc_register_devices(void)
{
sysbus_register_withprop(&slavio_misc_info);
sysbus_register_withprop(&apc_info);
}
device_init(slavio_misc_register_devices)