TCG will shortly implement VAES instructions, so add the relevant feature
word to the DisasContext.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add generic code generation that takes care of preparing operands
around calls to decode.e.gen in a table-driven manner, so that ALU
operations need not take care of that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new decoder is based on three principles:
- use mostly table-driven decoding, using tables derived as much as possible
from the Intel manual. Centralizing the decode the operands makes it
more homogeneous, for example all immediates are signed. All modrm
handling is in one function, and can be shared between SSE and ALU
instructions (including XMM<->GPR instructions). The SSE/AVX decoder
will also not have duplicated code between the 0F, 0F38 and 0F3A tables.
- keep the code as "non-branchy" as possible. Generally, the code for
the new decoder is more verbose, but the control flow is simpler.
Conditionals are not nested and have small bodies. All instruction
groups are resolved even before operands are decoded, and code
generation is separated as much as possible within small functions
that only handle one instruction each.
- keep address generation and (for ALU operands) memory loads and writeback
as much in common code as possible. All ALU operations for example
are implemented as T0=f(T0,T1). For non-ALU instructions,
read-modify-write memory operations are rare, but registers do not
have TCGv equivalents: therefore, the common logic sets up pointer
temporaries with the operands, while load and writeback are handled
by gvec or by helpers.
These principles make future code review and extensibility simpler, at
the cost of having a relatively large amount of code in the form of this
patch. Even EVEX should not be _too_ hard to implement (it's just a crazy
large amount of possibilities).
This patch introduces the main decoder flow, and integrates the old
decoder with the new one. The old decoder takes care of parsing
prefixes and then optionally drops to the new one. The changes to the
old decoder are minimal and allow it to be replaced incrementally with
the new one.
There is a debugging mechanism through a "LIMIT" environment variable.
In user-mode emulation, the variable is the number of instructions
decoded by the new decoder before permanently switching to the old one.
In system emulation, the variable is the highest opcode that is decoded
by the new decoder (this is less friendly, but it's the best that can
be done without requiring deterministic execution).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
REX.W can be used even in 32-bit mode by AVX instructions, where it is retroactively
renamed to VEX.W. Make the field available even in 32-bit mode but keep the REX_W()
macro as it was; this way, that the handling of dflag does not use it by mistake and
the AVX code more clearly points at the special VEX behavior of the bit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ldq takes a pointer to the first byte to load the 64-bit word in;
ldo takes a pointer to the first byte of the ZMMReg. Make them
consistent, which will be useful in the new SSE decoder's
load/writeback routines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used for emission and endian adjustments of gvec operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822223722.1697758-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than recurse directly on mmu_translate, go through the
same softmmu lookup that we did for the page table walk.
This centralizes all knowledge of MMU_NESTED_IDX, with respect
to setup of TranslationParams, to get_physical_address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-10-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use probe_access_full in order to resolve to a host address,
which then lets us use a host cmpxchg to update the pte.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/279
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-9-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need one variable set per translation level,
which requires copying into pte/pte_addr for huge pages.
Standardize on pte/pte_addr for all levels.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-8-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use MMU_NESTED_IDX for each memory access, rather than
just a single translation to physical. Adjust svm_save_seg
and svm_load_seg to pass in mmu_idx.
This removes the last use of get_hphys so remove it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-7-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These new mmu indexes will be helpful for improving
paging and code throughout the target.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-6-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace with PTE_HPHYS for the page table walk, and a direct call
to mmu_translate for the final stage2 translation. Hoist the check
for HF2_NPT_MASK out to get_physical_address, which avoids the
recursive call when stage2 is disabled.
We can now return all the way out to x86_cpu_tlb_fill before raising
an exception, which means probe works.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-5-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create TranslateParams for inputs, TranslateResults for successful
outputs, and TranslateFault for error outputs; return true on success.
Move stage1 error paths from handle_mmu_fault to x86_cpu_tlb_fill;
reorg the rest of handle_mmu_fault into get_physical_address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-4-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a boolean to control the call to get_hphys instead
of passing a null function pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace int is_write1 and magic numbers with the proper
MMUAccessType access_type and enumerators.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restore pc_save while undoing any state change that may have
happened while decoding the instruction. Leave a TODO about
removing all of that when the table-based decoder is complete.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221016222303.288551-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The semantic difference between the deprecated device_legacy_reset()
function and the newer device_cold_reset() function is that the new
function resets both the device itself and any qbuses it owns,
whereas the legacy function resets just the device itself and nothing
else.
The x86_cpu_after_reset() function uses device_legacy_reset() to reset
the APIC; this is an APICCommonState and does not have any qbuses, so
for this purpose the two functions behave identically and we can stop
using the deprecated one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221013171926.1447899-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When determining the endiandness of the target architecture we're
building for a small program is compiled, which in an obfuscated
way declares two strings. Then, we look which string is in
correct order (using strings binary) and deduct the endiandness.
But using the strings binary is problematic, because it's part of
toolchain (strings is just a symlink to
x86_64-pc-linux-gnu-strings or llvm-strings). And when
(cross-)compiling, it requires users to set the symlink to the
correct toolchain.
Fortunately, we have a better alternative anyways. We can mimic
what compiler.h is already doing: comparing __BYTE_ORDER__
against values for little/big endiandness.
Bug: https://bugs.gentoo.org/876933
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <d6d9c7043cfe6d976d96694f2b4ecf85cf3206f1.1665732504.git.mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Resetting a guest that has Hyper-V VMBus support enabled triggers a QEMU
assertion failure:
hw/hyperv/hyperv.c:131: synic_reset: Assertion `QLIST_EMPTY(&synic->sint_routes)' failed.
This happens both on normal guest reboot or when using "system_reset" HMP
command.
The failing assertion was introduced by commit 64ddecc88b ("hyperv: SControl is optional to enable SynIc")
to catch dangling SINT routes on SynIC reset.
The root cause of this problem is that the SynIC itself is reset before
devices using SINT routes have chance to clean up these routes.
Since there seems to be no existing mechanism to force reset callbacks (or
methods) to be executed in specific order let's use a similar method that
is already used to reset another interrupt controller (APIC) after devices
have been reset - by invoking the SynIC reset from the machine reset
handler via a new x86_cpu_after_reset() function co-located with
the existing x86_cpu_reset() in target/i386/cpu.c.
Opportunistically move the APIC reset handler there, too.
Fixes: 64ddecc88b ("hyperv: SControl is optional to enable SynIc") # exposed the bug
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <cb57cee2e29b20d06f81dce054cbcea8b5d497e8.1664552976.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the vwm_pvscsi controller resets individual SCSI devices
with the device_legacy_reset() function. The only difference between
this and device_cold_reset() is that device_legacy_reset() resets the
device but not any child qbuses it might have.
In this case, no SCSI device has a child qbus, so the functions have
the same behaviour. Switch to device_cold_reset() to move away from
using the deprecated function, and bring this SCSI controller in to
line with what all the others do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-3-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SCSI subsystem we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.
Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.
Since no devices attached to SCSI buses currently try to use 3-phase
reset, this should be a no-behaviour-change commit which just reduces
the use of a deprecated API.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/scsi/*.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-2-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids the unfortunate effect of building pc-bios blobs
even for targets the user isn't interested in.
Due to the bi-arch nature of x86 and PPC firmware, check for the
desired target by hand, and don't just look for the compilation target
in $target_list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will enable support for the 'dumpdtb' QMP/HMP command for the spike
machine.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-16-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the sifive_u
machine.
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-15-danielhb413@gmail.com>
The pSeries machine never bothered with the common machine->fdt
attribute. We do all the FDT related work using spapr->fdt_blob.
We're going to introduce a QMP/HMP command to dump the FDT, which will
rely on setting machine->fdt properly to work across all machine
archs/types.
Let's set machine->fdt in two places where we manipulate the FDT:
spapr_machine_reset() and CAS. There are other places where the FDT is
manipulated in the pSeries machines, most notably the hotplug/unplug
path. For now we'll acknowledge that we won't have the most accurate
representation of the FDT, depending on the current machine state, when
using this QMP/HMP fdt command. Making the internal FDT representation
always match the actual FDT representation that the guest is using is a
problem for another day.
spapr->fdt_blob is left untouched for now. To replace it with
machine->fdt, since we're migrating spapr->fdt_blob, we would need to
migrate machine->fdt as well. This is something that we would like to to
do keep our code simpler but it's also a work we'll leave for later.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-14-danielhb413@gmail.com>
This will enable support for the 'dumpdtb' QMP/HMP command for
all powernv machines.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-13-danielhb413@gmail.com>
We'll introduce a QMP/HMP command that requires machine->fdt to be set
properly.
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: qemu-ppc@nongnu.org
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-12-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the
virtex_ml507 machine.
Setting machine->fdt requires a MachineState pointer to be used inside
xilinx_load_device_tree(). Let's change the function to receive this
pointer from the caller. kernel_cmdline' can be retrieved directly from
the 'machine' pointer. 'ramsize' wasn't being used so can be removed.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-11-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the sam460ex
machine.
Setting machine->fdt requires a MachineState pointer to be used inside
sam460ex_load_device_tree(). Let's change the function to receive this
pointer from the caller. 'ramsize' and 'kernel_cmdline' can be retrieved
directly from the 'machine' pointer.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-10-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the bamboo
machine.
Setting machine->fdt requires a MachineState pointer to be used inside
bamboo_load_device_tree(). Let's change the function to receive this
pointer from the caller. 'ramsize' and 'kernel_cmdline' can be retrieved
directly from the 'machine' pointer.
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-9-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for all nios2
machines that uses nios2_load_dtb().
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-7-danielhb413@gmail.com>
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.
There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.
The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.
This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
In spapr_phb_children_reset() we call device_legacy_reset() to reset any
QOM children of the SPAPR PCI host bridge device. This will not reset
any qbus such a child might own. Switch to device_cold_reset(), which will
reset both the device and its buses. (If the child has no qbuses then
there will be no change in behaviour.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221014142841.2092784-1-peter.maydell@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Vector instructions in general are not supposed to change the FI bit.
However, xvcmp* instructions are calling gen_helper_float_check_status,
which is leading to a cleared FI flag where it should be kept
unchanged.
As helper_float_check_status only affects inexact, overflow and
underflow, and the xvcmp* instructions don't change these flags, this
issue can be fixed by removing the call to helper_float_check_status.
By doing this, the FI bit in FPSCR will be preserved as expected.
Fixes: 00084a25ad ("target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221005121551.27957-1-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that the MPC8544DS board also has a platform bus, the if statement
is always true.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-8-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Models the real device more closely.
Address and size values are taken from mpc8544.dts from the linux-5.17.7
tree. The IRQ range is taken from e500plat.c.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221003203142.24355-7-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-6-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PlatformBusDevice has an mmio attribute which gets aliased to
SysBusDevice::mmio[0]. So PlatformbusDevice::mmio can be used directly,
avoiding the sysbus API.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221003203142.24355-5-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The sudden change of topics is slightly confusing and makes the
networking information less visible. So separate the networking chapter
to improve comprehensibility.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-4-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Having a dedicated config switch makes dependency handling cleaner.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-3-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Gives users more fine-grained control over what should be compiled into
QEMU.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These are used by both the SDRAM controller model and system DCRs. In
preparation to move SDRAM controller in its own file move these macros
to the ppc4xx.h header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <74d9bf4891e2ccceb52bb6ca6b54fd3f37a9fb04.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc440_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr2. This is mostly
modelling the DDR2 SDRAM controller found in the 460EX (used on the
sam460ex board). Newer SoCs (regardless of their PPC core, e.g. 405EX)
may have this controller but we only emulate enough of it for the
sam460ex u-boot firmware.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <3e82ae575c7c41e464a0082d55ecb4ebcc4d4329.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the check for valid memory sizes from board to sdram controller
init. This adds the missing valid memory sizes of 16 and 8 MiB to the
DoC and the board now only checks for additional restrictions imposed
by its firmware then sdram init checks for valid sizes for SoC.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <41da3797392acaacc7963b79512c8af8005fa4b0.1664021647.git.balaton@eik.bme.hu>
[danielhb: avoid 4*GiB size due to 32 bit build problems]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename functions to avoid name clashes when moving the DDR2 controller
model currently called ppc440_sdram to ppc4xx_devs. This also more
clearly shows which function belongs to which model.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <9c09d10fbf36940ebbe30d7038d69cf3f2e58371.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename local sdram variable in ppc440_sdram_init to s for readability.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <7351b80fa321c32a6229e685dfdc940232f8b788.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM
controller from the board. Firmware does this so it may only be needed
when booting with -kernel without firmware but we enable SDRAM
unconditionally to preserve previous behaviour.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To allow removing the do_init hack we need to improve the DDR2 SDRAM
controller model to handle the enable/disable bit that it ignored so
far.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <f8900aadb1a4426a6444741e6876c898b3b77f7b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
