scsi: Use device_cold_reset() and bus_cold_reset()

In the SCSI subsystem we currently use the legacy functions
qdev_reset_all() and qbus_reset_all().  These perform a recursive
reset, starting from either a qbus or a qdev.  However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.

Switch to using the device_cold_reset() and bus_cold_reset()
functions.  These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.

Since no devices attached to SCSI buses currently try to use 3-phase
reset, this should be a no-behaviour-change commit which just reduces
the use of a deprecated API.

Commit created with:
  sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/scsi/*.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-2-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/scsi/esp.c

@@ -941,7 +941,7 @@ static void esp_soft_reset(ESPState *s)
 
 static void esp_bus_reset(ESPState *s)
 {
-    qbus_reset_all(BUS(&s->bus));
+    bus_cold_reset(BUS(&s->bus));
 }
 
 static void parent_esp_reset(ESPState *s, int irq, int level)

hw/scsi/lsi53c895a.c

@@ -1868,7 +1868,7 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
         }
         if (val & LSI_SCNTL1_RST) {
             if (!(s->sstat0 & LSI_SSTAT0_RST)) {
-                qbus_reset_all(BUS(&s->bus));
+                bus_cold_reset(BUS(&s->bus));
                 s->sstat0 |= LSI_SSTAT0_RST;
                 lsi_script_scsi_interrupt(s, LSI_SIST0_RST, 0);
             }
@@ -1926,7 +1926,7 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
             lsi_execute_script(s);
         }
         if (val & LSI_ISTAT0_SRST) {
-            qdev_reset_all(DEVICE(s));
+            device_cold_reset(DEVICE(s));
         }
         break;
     case 0x16: /* MBOX0 */

hw/scsi/megasas.c

@@ -1484,7 +1484,7 @@ static int megasas_cluster_reset_ld(MegasasState *s, MegasasCmd *cmd)
         MegasasCmd *tmp_cmd = &s->frames[i];
         if (tmp_cmd->req && tmp_cmd->req->dev->id == target_id) {
             SCSIDevice *d = tmp_cmd->req->dev;
-            qdev_reset_all(&d->qdev);
+            device_cold_reset(&d->qdev);
         }
     }
     return MFI_STAT_OK;

hw/scsi/mptsas.c

@@ -522,7 +522,7 @@ reply_maybe_async:
             reply.ResponseCode = MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN;
             goto out;
         }
-        qdev_reset_all(&sdev->qdev);
+        device_cold_reset(&sdev->qdev);
         break;
 
     case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
@@ -538,13 +538,13 @@ reply_maybe_async:
         QTAILQ_FOREACH(kid, &s->bus.qbus.children, sibling) {
             sdev = SCSI_DEVICE(kid->child);
             if (sdev->channel == 0 && sdev->id == req->TargetID) {
-                qdev_reset_all(kid->child);
+                device_cold_reset(kid->child);
             }
         }
         break;
 
     case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
-        qbus_reset_all(BUS(&s->bus));
+        bus_cold_reset(BUS(&s->bus));
         break;
 
     default:
@@ -807,7 +807,7 @@ static void mptsas_soft_reset(MPTSASState *s)
     s->intr_mask = MPI_HIM_DIM | MPI_HIM_RIM;
     mptsas_update_interrupt(s);
 
-    qbus_reset_all(BUS(&s->bus));
+    bus_cold_reset(BUS(&s->bus));
     s->intr_status = 0;
     s->intr_mask = save_mask;
 

hw/scsi/spapr_vscsi.c

@@ -865,7 +865,7 @@ static int vscsi_process_tsk_mgmt(VSCSIState *s, vscsi_req *req)
                 break;
             }
 
-            qdev_reset_all(&d->qdev);
+            device_cold_reset(&d->qdev);
             break;
 
         case SRP_TSK_ABORT_TASK_SET:

hw/scsi/virtio-scsi.c

@@ -365,7 +365,7 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
             goto incorrect_lun;
         }
         s->resetting++;
-        qdev_reset_all(&d->qdev);
+        device_cold_reset(&d->qdev);
         s->resetting--;
         break;
 
@@ -417,7 +417,7 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
         QTAILQ_FOREACH_RCU(kid, &s->bus.qbus.children, sibling) {
             SCSIDevice *d1 = SCSI_DEVICE(kid->child);
             if (d1->channel == 0 && d1->id == target) {
-                qdev_reset_all(&d1->qdev);
+                device_cold_reset(&d1->qdev);
             }
         }
         rcu_read_unlock();
@@ -831,7 +831,7 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
 
     assert(!s->dataplane_started);
     s->resetting++;
-    qbus_reset_all(BUS(&s->bus));
+    bus_cold_reset(BUS(&s->bus));
     s->resetting--;
 
     vs->sense_size = VIRTIO_SCSI_SENSE_DEFAULT_SIZE;

hw/scsi/vmw_pvscsi.c

@@ -445,7 +445,7 @@ static void
 pvscsi_reset_adapter(PVSCSIState *s)
 {
     s->resetting++;
-    qbus_reset_all(BUS(&s->bus));
+    bus_cold_reset(BUS(&s->bus));
     s->resetting--;
     pvscsi_process_completion_queue(s);
     assert(QTAILQ_EMPTY(&s->pending_queue));
@@ -894,7 +894,7 @@ pvscsi_on_cmd_reset_bus(PVSCSIState *s)
     trace_pvscsi_on_cmd_arrived("PVSCSI_CMD_RESET_BUS");
 
     s->resetting++;
-    qbus_reset_all(BUS(&s->bus));
+    bus_cold_reset(BUS(&s->bus));
     s->resetting--;
     return PVSCSI_COMMAND_PROCESSING_SUCCEEDED;
 }