Commit 4c70875372 ("pci: advertise a page aligned ATS") advertises
the page aligned via ATS capability (RO) to unbrek recent Linux IOMMU
drivers since 5.2. But it forgot the compat the capability which
breaks the migration from old machine type:
(qemu) qemu-kvm: get_pci_config_device: Bad config data: i=0x104 read:
0 device: 20 cmask: ff wmask: 0 w1cmask:0
This patch introduces a new parameter "x-ats-page-aligned" for
virtio-pci device and turns it on for machine type which is newer than
5.1.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Fixes: 4c70875372 ("pci: advertise a page aligned ATS")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210406040330.11306-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After introducing non-scalar machine properties, it would be preferrable
to have a single acpitable property which includes both generic
information (such as the OEM ids) and custom tables currently
passed via -acpitable.
Do not saddle ourselves with legacy oem-id and oem-table-id
properties, instead mark them as experimental.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210402082128.13854-1-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Some small documentation updates
* Some small misc fixes
-----BEGIN PGP SIGNATURE-----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=nOMd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-04-01' into staging
* Updates for the MAINTAINERS file
* Some small documentation updates
* Some small misc fixes
# gpg: Signature made Thu 01 Apr 2021 13:30:39 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-04-01:
device-crash-test: Ignore errors about a bus not being available
docs: Fix typo in the default name of the qemu-system-x86_64 binary
docs: Remove obsolete paragraph about config-target.mak
util/compatfd.c: Fixed style issues
qom: Fix default values in help
MAINTAINERS: Mark SH-4 hardware emulation orphan
MAINTAINERS: Mark RX hardware emulation orphan
MAINTAINERS: add virtio-fs mailing list
MAINTAINERS: Drop the line with Xiang Zheng
MAINTAINERS: replace Huawei's email to personal one
MAINTAINERS: Drop the lines with Sarah Harris
MAINTAINERS: add/replace backups for some s390 areas
MAINTAINERS: Fix tests/migration maintainers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a device model
(a) doesn't set the value to a correct interrupt number and then
(b) triggers an interrupt for itself,
it's device model bug. Add assert on interrupt pin number to catch
this kind of bug more obviously.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <9cf8ac3b17e162daac0971d7be32deb6a33ae6ec.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
This patch adds reset ACPI PM related registers on vt82c686 reset time
and de-assert sci.
via_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset.
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <0a3fe998525552860919a690ce83dab8f663ab99.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
The function was introduced by commit
eaba51c573 (acpi, acpi_piix, vt82c686: factor out PM1_CNT logic)
that forgot to actually call it at piix4 reset time and as result
SCI_EN wasn't set as was expected by 6be8cf56bc in acpi_only mode.
So Windows crashes when it notices that SCI_EN is not set and FADT is
not providing information about how to enable it anymore.
Reproducer:
qemu-system-x86_64 -enable-kvm -M pc-i440fx-6.0,smm=off -cdrom any_windows_10x64.iso
Fix it by calling acpi_pm1_cnt_reset() at piix4 reset time.
Occasionally this patch adds reset acpi PM related registers on
piix4 reset time and de-assert sci.
piix4_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset. pm_reset() in ich9.c correctly calls
corresponding reset functions.
Fixes: 6be8cf56bc (acpi/core: always set SCI_EN when SMM isn't supported)
Reported-by: Reinoud Zandijk <reinoud@NetBSD.org>
Co-developed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <8a5bbd19727045ec863523830078dd4ca63f6a9a.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value is assigned later in this procedure.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-3-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1743098
This commit completes the solution of segfault in hot unplug flow
(by commit ccec7e9603).
Added missing check for vdev in virtio_pci_isr_read.
Typical stack of crash:
virtio_pci_isr_read ../hw/virtio/virtio-pci.c:1365 with proxy-vdev = 0
memory_region_read_accessor at ../softmmu/memory.c:442
access_with_adjusted_size at ../softmmu/memory.c:552
memory_region_dispatch_read1 at ../softmmu/memory.c:1420
memory_region_dispatch_read at ../softmmu/memory.c:1449
flatview_read_continue at ../softmmu/physmem.c:2822
flatview_read at ../softmmu/physmem.c:2862
address_space_read_full at ../softmmu/physmem.c:2875
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-2-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu crashes on shutdown if the chardev used by vhost-user-blk has been
finalized before the vhost-user-blk.
This happens with char-socket chardev operating in the listening mode (server).
The char-socket chardev emits "close" event at the end of finalizing when
its internal data is destroyed. This calls vhost-user-blk event handler
which in turn tries to manipulate with destroyed chardev by setting an empty
event handler for vhost-user-blk cleanup postponing.
This patch separates the shutdown case from the cleanup postponing removing
the need to set an event handler.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210325151217.262793-4-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 4bcad76f4c ("vhost-user-blk: delay vhost_user_blk_disconnect")
introduced postponing vhost_dev cleanup aiming to eliminate qemu aborts
because of connection problems with vhost-blk daemon.
However, it introdues a new problem. Now, any communication errors
during execution of vhost_dev_init() called by vhost_user_blk_device_realize()
lead to qemu abort on assert in vhost_dev_get_config().
This happens because vhost_user_blk_disconnect() is postponed but
it should have dropped s->connected flag by the time
vhost_user_blk_device_realize() performs a new connection opening.
On the connection opening, vhost_dev initialization in
vhost_user_blk_connect() relies on s->connection flag and
if it's not dropped, it skips vhost_dev initialization and returns
with success. Then, vhost_user_blk_device_realize()'s execution flow
goes to vhost_dev_get_config() where it's aborted on the assert.
To fix the problem this patch adds immediate cleanup on device
initialization(in vhost_user_blk_device_realize()) using different
event handlers for initialization and operation introduced in the
previous patch.
On initialization (in vhost_user_blk_device_realize()) we fully
control the initialization process. At that point, nobody can use the
device since it isn't initialized and we don't need to postpone any
cleanups, so we can do cleaup right away when there is a communication
problem with the vhost-blk daemon.
On operation we leave it as is, since the disconnect may happen when
the device is in use, so the device users may want to use vhost_dev's data
to do rollback before vhost_dev is re-initialized (e.g. in vhost_dev_set_log()).
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-3-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to use different connect/disconnect event handlers
on device initialization and operation as seen from the further
commit fixing a bug on device initialization.
This patch refactors the code to make use of them: we don't rely any
more on the VM state for choosing how to cleanup the device, instead
we explicitly use the proper event handler depending on whether
the device has been initialized.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-2-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Recent QEMU versions now sometimes exit cleanly with an error message
that a bus is not available for a specified device. Don't flag those
as an error in the device-crash-test script.
Message-Id: <20210323164718.1393792-1-thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's a '-' between 'qemu' and 'system', not a '_'.
Fixes: 324b2298fe ("docs/system: convert Texinfo documentation to rST")
Message-Id: <20210401051829.3169438-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
$TARGET-NAME/config-target.mak has been removed a while ago.
Remove it now from the documentation, too.
Fixes: fdb75aeff7 ("configure: remove target configuration")
Message-Id: <20210316124208.455456-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Output of default values in device help is broken:
$ ./qemu-system-x86_64 -S -display none -monitor stdio
QEMU 5.2.50 monitor - type 'help' for more information
(qemu) device_add pvpanic,help
pvpanic options:
events=<uint8> - (default: (null))
ioport=<uint16> - (default: (null))
pvpanic[0]=<child<qemu:memory-region>>
The "(null)" is glibc printing a null pointer. Other systems crash
instead. Having a help request crash a running VM can really spoil
your day.
Root cause is a botched replacement of qstring_free() by
g_string_free(): to get the string back, we need to pass true to the
former, but false to the latter. Fix the argument.
Fixes: eab3a4678b
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210324084130.3986072-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Yoshinori Sato doesn't have time to manage QEMU reviews.
The code is in good shape and hasn't started to bitrot,
so mark the SH-4 hardware as orphan to give the possibility
to any contributor to step in and fill the gap.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Magnus Damm <magnus.damm@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210312155513.1849109-3-f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Yoshinori Sato doesn't have time to manage QEMU reviews.
The code is in good shape and hasn't started to bitrot,
so mark the RX target and hardware as orphan to give the
possibility to any contributor to step in and fill the gap.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210312155513.1849109-2-f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
General discussion and patch reviews take place on this list for both
virtiofsd (tools/virtiofsd/*) and the guest kernel module.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210318154157.1357224-1-ckuehl@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When sending a mail with CC: to zhengxiang9@huawei.com I got a mail
back saying:
Your message couldn't be delivered
The message you sent to zhengxiang9@huawei.com couldn't be delivered due to:
Recipient email address is possibly incorrect.
Further information
5.1.1 <zhengxiang9@huawei.com>: Recipient address rejected: Failed recipient
validation check.: host 127.0.0.1[127.0.0.1] said: 554 5.7.1 recipient verify
from ldap failed (in reply to RCPT TO command)
Looks like this address does not exist anymore, thus drop it from the
MAINTAINERS file.
Message-Id: <20210401065343.3197791-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to conveniently receive email, replace the Huawei
email address with my personal one.
Signed-off-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-Id: <1615462144-10864-1-git-send-email-gengdongjiu1@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a mail to the qemu-devel mailing list, Sarah wrote:
"I was added as a reviewer (in MAINTAINERS) for the AVR target for the
duration of my research work using it.
The funding for my project expires in the middle of April, so I will not be
able to provide time for reviewing patches from that point."
Thus let's remove the corresponding lines in the MAINTAINERS file.
Message-Id: <20210401062426.3192118-1-thuth@redhat.com>
Reviewed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When changing from chardev-socket (which supports yank) to
chardev-socket again, it fails, because the new chardev attempts
to register a new yank instance. This in turn fails, as there
still is the yank instance from the current chardev. Also,
the old chardev shouldn't unregister the yank instance when it
is freed.
To fix this, now the new chardev only registers a yank instance if
the current chardev doesn't support yank and thus hasn't registered
one already. Also, when the old chardev is freed, it now only
unregisters the yank instance if the new chardev doesn't need it.
If the initialization of the new chardev fails, it still has
chr->handover_yank_instance set and won't unregister the yank
instance when it is freed.
s->registered_yank is always true here, as chardev-change only works
on user-visible chardevs and those are guraranteed to register a
yank instance as they are initialized via
chardev_new()
qemu_char_open()
cc->open() (qmp_chardev_open_socket()).
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Li Zhang <li.zhang@cloud.ionos.com>
Message-Id: <9637888d7591d2971975188478bb707299a1dc04.1617127849.git.lukasstraub2@web.de>
Always pass the id to chardev_new, since it is needed to register
the yank instance for the chardev. Also, after checking that
nothing calls chardev_new with id=NULL, assert() that id!=NULL.
This fixes a crash when using chardev-change to change a chardev
to chardev-socket, which attempts to register a yank instance.
This in turn tries to dereference the NULL-pointer.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Li Zhang <li.zhang@cloud.ionos.com>
Message-Id: <3e669b6c160aa7278e37c4d95e0445574f96c7b7.1617127849.git.lukasstraub2@web.de>
Move object_property_try_add_child out of chardev_new into it's
callers. This is a preparation for the next patches to fix yank
with the chardev-change case.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Li Zhang <li.zhang@cloud.ionos.com>
Message-Id: <b2a5092ec681737bc3a21ea16f3c00848b277521.1617127849.git.lukasstraub2@web.de>
Yank now only depends on util and can be always linked in. Also remove
the stubs as they are not needed anymore.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <997aa12a28c555d8a3b7a363b3bda5c3cf1821ba.1616521341.git.lukasstraub2@web.de>
Remove dependency on qiochannel by removing yank_generic_iochannel and
letting migration and chardev use their own yank function for
iochannel.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20ff143fc2db23e27cd41d38043e481376c9cec1.1616521341.git.lukasstraub2@web.de>
Now that we merged into one doc, it makes the nav looks nicer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210323074704.4078381-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This commit fixes an issue where migration is failing in the load phase
because of a false alarm about data unavailability.
Following is the error received when the amount of data to be transferred
exceeds the default buffer size setup by G_BUFFERED_INPUT_STREAM(4KiB),
even when the maximum data size supported by this backend is 1MiB
(DBUS_VMSTATE_SIZE_LIMIT):
dbus_vmstate_post_load: Invalid vmstate size: 4364
qemu-kvm: error while loading state for instance 0x0 of device 'dbus-vmstate/dbus-vmstate'
This commit sets the size of the input stream buffer used during load to
DBUS_VMSTATE_SIZE_LIMIT which is the maximum amount of data a helper can
send during save phase.
Secondly, this commit makes sure that the input stream buffer is loaded before
checking the size of the data available in it, rectifying the false alarm about
data unavailability.
Fixes: 5010cec2bc ("Add dbus-vmstate object")
Signed-off-by: Priyankar Jain <priyankar.jain@nutanix.com>
Message-Id: <cdaad4718e62bf22fd5e93ef3e252de20da5c17c.1612273156.git.priyankar.jain@nutanix.com>
[ Modified printf format for gsize ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
g_hash_table_add always retains ownership of the pointer passed in as
the key. Its return status merely indicates whether the added entry was
new, or replaced an existing entry. Thus key must never be freed after
this method returns.
Spotted by ASAN:
==2407186==ERROR: AddressSanitizer: heap-use-after-free on address 0x6020003ac4f0 at pc 0x7ffff766659c bp 0x7fffffffd1d0 sp 0x7fffffffc980
READ of size 1 at 0x6020003ac4f0 thread T0
#0 0x7ffff766659b (/lib64/libasan.so.6+0x8a59b)
#1 0x7ffff6bfa843 in g_str_equal ../glib/ghash.c:2303
#2 0x7ffff6bf8167 in g_hash_table_lookup_node ../glib/ghash.c:493
#3 0x7ffff6bf9b78 in g_hash_table_insert_internal ../glib/ghash.c:1598
#4 0x7ffff6bf9c32 in g_hash_table_add ../glib/ghash.c:1689
#5 0x5555596caad4 in module_load_one ../util/module.c:233
#6 0x5555596ca949 in module_load_one ../util/module.c:225
#7 0x5555596ca949 in module_load_one ../util/module.c:225
#8 0x5555596cbdf4 in module_load_qom_all ../util/module.c:349
Typical C bug...
Fixes: 90629122d2 ("module: use g_hash_table_add()")
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210316134456.3243102-1-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In an ideal world, we would all get along together very well, always be
polite and never end up in huge conflicts. And even if there are conflicts,
we would always handle each other fair and respectfully. Unfortunately,
this is not an ideal world and sometimes people forget how to interact with
each other in a professional and respectful way. Fortunately, this seldom
happens in the QEMU community, but for such rare cases it is preferrable
to have a basic code of conduct document available to show to people
who are misbehaving. In case that does not help yet, we should also have
a conflict resolution policy ready that can be applied in the worst case.
The Code of Conduct document tries to be short and to the point while
trying to remain friendly and welcoming; it is based on the Fedora Code
of Conduct[1] with extra detail added based on the Contributor Covenant
1.3.0[2]. Other proposals included the Contributor Covenant 1.3.0 itself
or the Django Code of Conduct[3] (which is also a derivative of Fedora's)
but, in any case, there was agreement on keeping the conflict resolution
policy separate from the CoC itself.
An important point is whether to apply the code of conduct to violations
that occur outside public spaces. The text herein restricts that to
individuals acting as a representative or a member of the project or
its community. This is intermediate between the Contributor Covenant
(which only mentions representatives of the community, for example using
an official project e-mail address or posting via an official social media
account), and the Django Code of Conduct, which says that violations of
this code outside these spaces "may" be considered but otherwise applies
no limit.
The conflict resolution policy is based on the Drupal Conflict Resolution
Policy[4] and its derivative, the Mozilla Consequence Ladder[5].
[1] https://www.fedoraproject.com/code-of-conduct/
[2] https://www.contributor-covenant.org/version/1/3/0/code-of-conduct/
[3] https://www.djangoproject.com/conduct/
[4] https://www.drupal.org/conflict-resolution
[5] https://github.com/mozilla/diversity/blob/master/code-of-conduct-enforcement/consequence-ladder.md
Co-developed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python scripts are not inputs, and putting them in @INPUT@. This
puts requirements on the command line format, keeping all inputs
close to the name of the script. Avoid that by not including the
script in the command and not in the inputs.
Also wrap "PYTHONPATH" usage with "env", since setting the environment
this way is not valid under Windows.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_semantics is an executable, not an input. Meson 0.57 special cases
the first argument and @INPUT@ is not expanded there. Fix that by
not including it in the input, only in the command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit "c87ea11631 configure: add --without-default-features" use
default_feature to set default values for configure option. This value
is used for EXESUF too.
However, EXESUF is not option to be tested, it is just append to any
binary name so using --without-default-features set EXESUF to "n"o and
all binaries using it has form <name>no (e.g. qemu-imgno).
This is not expected behavior as disabling features should not cause
generating different binary names.
Reverting back to setting EXESUF to empty value unless needed otherwise.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210331081845.105089-1-mrezanin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds icount handling to mfspr/mtspr instructions
that may deal with hardware timers.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Message-Id: <161700376169.1135890.8707223959310729949.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stafford Horne <shorne@gmail.com>
This patch enables vCPU notification to wake it up
when new async event comes in replay mode.
The motivation of this patch is the following.
Consider recorded block async event. It is saved into the log
with one of the checkpoints. This checkpoint may be passed in
vCPU loop. In replay mode when this async event is read from
the log, and block thread task is not finished yet, vCPU thread
goes to sleep. That is why this patch adds waking up the vCPU
to process this finished event.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161726519158.1476949.7614181684462079836.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves static last_delta variable into timers_state
structure to allow correct vmstate operations with icount shift=auto enabled.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161701335066.1180180.7104085247702343395.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 6d9abb6de9.
The real code change had already been added by Kevin's commit da0a932bbf
("hmp: QAPIfy object_add") and commit 6d9abb6d just added a duplicated
include statement as a left-over of a rebase.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210328054758.2351461-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record/replay uses checkpoints to synchronize the execution
of the threads and timers. Hardware events such as BH are
processed at the checkpoints too.
Event processing can cause refreshing the virtual timers
and calling the icount-related functions, that also use checkpoints.
This patch prevents recursive processing of such checkpoints,
because they have their own records in the log and should be
processed later.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161700476500.1140362.10108444973730452257.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ObjectType and ObjectOptions are defined in a target-independent file,
therefore they do not have access to target-specific configuration
symbols such as CONFIG_PSERIES or CONFIG_SEV. For this reason,
pef-guest and sev-guest are currently omitted when compiling the
generated QAPI files. In addition, this causes ObjectType to have
different definitions depending on the file that is including
qapi-types-qom.h (currently this is not causing any issues, but it
is wrong).
Define the two enum entries and the SevGuestProperties type
unconditionally to avoid the issue. We do not expect to have
many target-dependent user-creatable classes, so it is not
particularly problematic.
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These two opcodes only allow a memory operand.
Lacking the check for a register operand, we used the A0 temp
without initialization, which led to a tcg abort.
Buglink: https://bugs.launchpad.net/qemu/+bug/1921138
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324164650.128608-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3eacf70bb5 neglected to fix this
for softmmu configs, which pull in migration's use of gnutls.
This fixes the following compilation failure on Arm-based Macs:
In file included from migration/multifd.c:23:
In file included from migration/tls.h:25:
In file included from include/io/channel-tls.h:26:
In file included from include/crypto/tlssession.h:24:
include/crypto/tlscreds.h:28:10: fatal error: 'gnutls/gnutls.h' file not found
#include <gnutls/gnutls.h>
^~~~~~~~~~~~~~~~~
1 error generated.
(as well as for channel.c and tls.c)
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20210320171221.37437-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
S390 PCI currently has no backup, add one. Add an additional backup
for vfio-ccw and refresh the backup for vfio-ap.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <1616680509-8339-1-git-send-email-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
when executing the following scripts, it throw error message:
$ ./scripts/get_maintainer.pl -f tests/migration/guestperf.py
get_maintainer.pl: No maintainers found, printing recent contributors.
get_maintainer.pl: Do not blindly cc: them on patches! Use common sense.
add the tests/migration to the "Migration" section of MAINTAINERS
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <91d5978357fb8709ef61d2030984f7142847037d.1616141556.git.huangy81@chinatelecom.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A fix for VDI image files and more generally for CoRwlock.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmBkRe8ACgkQnKSrs4Gr
c8g2EAf9Eq81Ve816xZTUc/2FzC0HGKxPehNkdbCBLbX/a+HgYQEUALFP6Lzfvud
D1rF2bcVTpPUdvpW2UebIyQcLqRH80q1Ba9VhuA99FAYeryg+xVcRFLbHgKfticT
omKSc9yrwJgKJXRZodSsggVBPjsCmhfClO0kA4nGLEywmZbr7i1L/fcbUPI68cOr
5Lv19UDjTIgaGCt0oJN9x/W7FKzz53tBOkGKqmQd2ZEq4LmIlObFQq7ZIHRejneU
76PDPiNRM4Y6fotXl91vMjCZykihuf8FYncXWhnHIOdUxUPQge2SCXhRe16bCEVG
y/6keiV9U3CfsSCHuLK85QnBQKrTPg==
=T9vh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request
A fix for VDI image files and more generally for CoRwlock.
# gpg: Signature made Wed 31 Mar 2021 10:50:39 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request:
test-coroutine: Add rwlock downgrade test
test-coroutine: Add rwlock upgrade test
coroutine-lock: Reimplement CoRwlock to fix downgrade bug
coroutine-lock: Store the coroutine in the CoWaitRecord only once
block/vdi: Don't assume that blocks are larger than VdiHeader
block/vdi: When writing new bmap entry fails, don't leak the buffer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
