In get_physical_address, the canonical address check failed to
set TranslateFault.stage2, which resulted in an uninitialized
read from the struct when reporting the fault in x86_cpu_tlb_fill.
Adjust all error paths to use structure assignment so that the
entire struct is always initialized.
Reported-by: Daniel Hoffman <dhoff749@gmail.com>
Fixes: 9bbcf37219 ("target/i386: Reorg GET_HPHYS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221201074522.178498-1-richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1324
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MMX state is saved/restored by FSAVE/FRSTOR so the instructions are
not illegal opcodes even if CR4.OSFXSR=0. Make sure that validate_vex
takes into account the prefix and only checks HF_OSFXSR_MASK in the
presence of an SSE instruction.
Fixes: 20581aadec ("target/i386: validate VEX prefixes via the instructions' exception classes", 2022-10-18)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1350
Reported-by: Helge Konetzka (@hejko on gitlab.com)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY3zJLQAKCRBAov/yOSY+
3wHkBADTgirzsosyvVGza6nHD1QTEK6ZqnvYB0wCoxKBt1btvzLoKO5gbe7S3Pq4
obFurS+5QclwIuLR6ZkihNGMBL+uq6XZryUGG3pU8h1XZigdduiEk7l7YGF+N+hz
/7ESJGHzCTiXyTTXBNgLJEJYfUYdV+kWbXkIQuJGT+kdlzUifA==
=Uod8
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20221122' of https://gitlab.com/gaosong/qemu into staging
LoongArch pull for 7.2-rc2
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY3zJLQAKCRBAov/yOSY+
# 3wHkBADTgirzsosyvVGza6nHD1QTEK6ZqnvYB0wCoxKBt1btvzLoKO5gbe7S3Pq4
# obFurS+5QclwIuLR6ZkihNGMBL+uq6XZryUGG3pU8h1XZigdduiEk7l7YGF+N+hz
# /7ESJGHzCTiXyTTXBNgLJEJYfUYdV+kWbXkIQuJGT+kdlzUifA==
# =Uod8
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 22 Nov 2022 08:05:49 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20221122' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Replace the value of uart info with macro
hw/loongarch: Fix setprop_sized method in fdt rtc node.
hw/loongarch: Add default stdout uart in fdt
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fixes regressions:
virtio error message triggered by seabios
failure in vhost due to VIRTIO_F_RING_RESET
broken keyboard under seabios
some biosbits test fixes
there's still a known regression with migration and vsock,
not fixed yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2
98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE
04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk
DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn
6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ
I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE=
=bF2U
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,virtio: regression, test fixes
fixes regressions:
virtio error message triggered by seabios
failure in vhost due to VIRTIO_F_RING_RESET
broken keyboard under seabios
some biosbits test fixes
there's still a known regression with migration and vsock,
not fixed yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2
# 98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE
# 04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk
# DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn
# 6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ
# I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE=
# =bF2U
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 22 Nov 2022 05:22:06 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio: disable error for out of spec queue-enable
acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
tests/avocado: configure acpi-bits to use avocado timeout
MAINTAINERS: add mst to list of biosbits maintainers
tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
acpi: x86: move RPQx field back to _SB scope
tests: acpi: whitelist DSDT before moving PRQx to _SB scope
vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Only probe if docker or podman binaries in path
- reduce console noise for aspeed avocado tests
- update documents on maintainer roles and process
- raise timeout for ppc64 avocado tests
- integrate coverage reports into gitlab
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmN8nE0ACgkQ+9DbCVqe
KkShJQf/UXmesO6kdrW+IcKme3usea18Nvwqav5QYkiKF2TU1aU4Fguqfz+2bJ1V
81ej3aUYR5pAxLL4pExoJkXbxB59B4gWPkL2QS8OZvNJVqGz/37LZBEY/nZOJ2kS
rPAiCVDnKE/mUrK08DdAQst4PmT8SB09oHX+1WCEdylenT2cmEDNKOGkX6X/XNKU
GOAtV1lzzD4L18rWV6ejV0uowICoNgjvvbHqIV7efwAEeKOctdesPx427xyhGeN9
0iWglby5TGxdsZCk01zeiAvlvfEr57d7uU7AF/nNxka+F8FpuBcB7pMxtw8rupTX
eHjfN4XZ+hUZ4BXplc6RLR27H4Nk4Q==
=jgXs
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-for-7.2-221122-1' of https://gitlab.com/stsquad/qemu into staging
Testing and doc updates:
- Only probe if docker or podman binaries in path
- reduce console noise for aspeed avocado tests
- update documents on maintainer roles and process
- raise timeout for ppc64 avocado tests
- integrate coverage reports into gitlab
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmN8nE0ACgkQ+9DbCVqe
# KkShJQf/UXmesO6kdrW+IcKme3usea18Nvwqav5QYkiKF2TU1aU4Fguqfz+2bJ1V
# 81ej3aUYR5pAxLL4pExoJkXbxB59B4gWPkL2QS8OZvNJVqGz/37LZBEY/nZOJ2kS
# rPAiCVDnKE/mUrK08DdAQst4PmT8SB09oHX+1WCEdylenT2cmEDNKOGkX6X/XNKU
# GOAtV1lzzD4L18rWV6ejV0uowICoNgjvvbHqIV7efwAEeKOctdesPx427xyhGeN9
# 0iWglby5TGxdsZCk01zeiAvlvfEr57d7uU7AF/nNxka+F8FpuBcB7pMxtw8rupTX
# eHjfN4XZ+hUZ4BXplc6RLR27H4Nk4Q==
# =jgXs
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 22 Nov 2022 04:54:21 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-misc-for-7.2-221122-1' of https://gitlab.com/stsquad/qemu:
gitlab: integrate coverage report
tests/avocado: skip aarch64 cloud TCG tests in CI
tests/avocado: introduce alpine virt test for CI
tests/avocado: Raise timeout for boot_linux.py:BootLinuxPPC64.test_pseries_tcg
docs/devel: try and improve the language around patch review
docs/devel: simplify the minimal checklist
docs/devel: make language a little less code centric
docs/devel: add a maintainers section to development process
tests/docker: allow user to override check target
tests/avocado/machine_aspeed.py: Reduce noise on the console for SDK tests
Run docker probe only if docker or podman are available
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
Using macro to replace the value of uart info such as addr, size
in acpi_build method.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115115008.3372489-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Fix setprop_sized method in fdt rtc node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221116040300.3459818-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add "chosen" subnode into LoongArch fdt, and set it's
"stdout-path" prop to uart node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115114923.3372414-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Virtio 1.0 is pretty clear that features have to be
negotiated before enabling VQs. Unfortunately Seabios
ignored this ever since gaining 1.0 support (UEFI is ok).
Comment the error out for now, and add a TODO.
Fixes: 3c37f8b8d1 ("virtio: introduce virtio_queue_enable()")
Cc: "Kangjie Xu" <kangjie.xu@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221121200339.362452-1-mst@redhat.com>
Debugging bits issue often involves running the QEMU command line manually
outside of the avocado environment with the generated ISO. Hence, its
inconvenient if the iso gets cleaned up after the test has finished. This change
makes sure that the work directory is kept after the test finishes if the test
is run with BITS_DEBUG=1 in the environment so that the iso is available for use
with the QEMU command line.
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221117113630.543495-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of using a hardcoded timeout, just rely on Avocado's built-in
test case timeout. This helps avoid timeout issues on machines where 60
seconds is not sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20221115212759.3095751-1-jsnow@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Adding Michael's name to the list of bios bits maintainers so that all changes
and fixes into biosbits framework can go through his tree and he is notified.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221111151138.36988-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 47a373faa6 (acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML)
moved ISA bridge AML generation to respective devices and was using
aml_alias() to provide PRQx fields in _SB. scope. However, it turned
out that SeaBIOS was not able to process Alias opcode when parsing DSDT,
resulting in lack of keyboard during boot (SeaBIOS console, grub, FreeDOS).
While fix for SeaBIOS is posted
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/RGPL7HESH5U5JRLEO6FP77CZVHZK5J65/
fixed SeaBIOS might not make into QEMU-7.2 in time.
Hence this workaround that puts PRQx back into _SB scope
and gets rid of aliases in ISA bridge description, so
DSDT will be parsable by broken SeaBIOS.
That brings back hardcoded references to ISA bridge
PCI0.S08.P40C/PCI0.SF8.PIRQ
where middle part now is auto generated based on slot it's
plugged in, but it should be fine as bridge initialization
also hardcodes PCI address of the bridge so it can't ever
move. Once QEMU tree has fixed SeaBIOS blob, we should be able
to drop this part and revert back to alias based approach
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This should hopefully give is nice coverage information about what our
tests (or at least the subset we are running) have hit. Ideally we
would want a way to trigger coverage on tests likely to be affected by
the current commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117172532.538149-12-alex.bennee@linaro.org>
We now have a much lighter weight test in machine_aarch64_virt which
tests the full boot chain in less time. Rename the tests while we are
at it to make it clear it is a Fedora cloud image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-11-alex.bennee@linaro.org>
The boot_linux tests download and run a full cloud image boot and
start a full distro. While the ability to test the full boot chain is
worthwhile it is perhaps a little too heavy weight and causes issues
in CI. Fix this by introducing a new alpine linux ISO boot in
machine_aarch64_virt.
This boots a fully loaded -cpu max with all the bells and whistles in
31s on my machine. A full debug build takes around 180s on my machine
so we set a more generous timeout to cover that.
We don't add a test for lesser GIC versions although there is some
coverage for that already in the boot_xen.py tests. If we want to
introduce more comprehensive testing we can do it with a custom kernel
and initrd rather than a full distro boot.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-10-alex.bennee@linaro.org>
On my machine, a debug build of QEMU takes about 260 seconds to
complete this test, so with the current timeout value of 180 seconds
it always times out. Double the timeout value to 360 so the test
definitely has enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221110142901.3832318-1-peter.maydell@linaro.org>
Message-Id: <20221117172532.538149-9-alex.bennee@linaro.org>
It is important that contributors take the review process seriously
and we collaborate in a respectful way while avoiding personal
attacks. Try and make this clear in the language.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-8-alex.bennee@linaro.org>
The bullet points are quite long and contain process tips. Move those
bits of the bullet to the relevant sections and link to them. Use a
table for nicer formatting of the checklist.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-7-alex.bennee@linaro.org>
We welcome all sorts of patches.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-6-alex.bennee@linaro.org>
We don't currently have a clear place in the documentation to describe
the roles and responsibilities of a maintainer. Lets create one so we
can. I've moved a few small bits out of other files to try and keep
everything in one place.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-5-alex.bennee@linaro.org>
This is useful when trying to bisect a particular failing test behind
a docker run. For example:
make docker-test-clang@fedora \
TARGET_LIST=arm-softmmu \
TEST_COMMAND="meson test qtest-arm/qos-test" \
J=9 V=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-4-alex.bennee@linaro.org>
The Aspeed SDK images are based on OpenBMC which starts a lot of
services. The output noise on the console can break from time to time
the test waiting for the logging prompt.
Change the U-Boot bootargs variable to add "quiet" to the kernel
command line and reduce the output volume. This also drops the test on
the CPU id which was nice to have but not essential.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221104075347.370503-1-clg@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221117172532.538149-3-alex.bennee@linaro.org>
The docker probe uses "sudo -n" which can cause an e-mail with a security warning
each time when configure is run. Therefore run docker probe only if either docker
or podman are available.
That avoids the problematic "sudo -n" on build environments which have neither
docker nor podman installed.
Fixes: c4575b5915 ("configure: store container engine in config-host.mak")
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221030083510.310584-1-sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221117172532.538149-2-alex.bennee@linaro.org>
The Large-Send Task Offload Tx Descriptor (9.2.1 Transmit) has a
Large-Send MSS value where the driver specifies the MSS. See the
datasheet here:
http://realtek.info/pdf/rtl8139cp.pdf
The code ignores this value and uses a hardcoded MSS of 1500 bytes
instead. When the MTU is less than 1500 bytes the hardcoded value
results in IP fragmentation and poor performance.
Use the Large-Send MSS value to correctly size Large-Send packets.
Jason Wang <jasowang@redhat.com> noticed that the Large-Send MSS value
mask was incorrect so it is adjusted to match the datasheet and Linux
8139cp driver.
This issue was discussed in the past here:
https://lore.kernel.org/all/20161114162505.GD26664@stefanha-x1.localdomain/
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Reported-by: Tobias Fiebig <tobias+git@fiebig.nl>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1312
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-4-stefanha@redhat.com>
There are two Tx Descriptor formats called mode 0 and mode 1. The mode
is determined by the Large Send bit.
CP_TX_IPCS (bit 18) is defined in mode 1 but the code checks the bit
unconditionally. In mode 0 bit 18 is part of the Large Send MSS value.
Explicitly check the Large Send bit to distinguish Tx command modes.
This avoids bugs where modes are confused. Note that I didn't find any
actual bugs aside from needlessly computing the IP checksum when the
Large Send bit is enabled.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-3-stefanha@redhat.com>
The device turns the Tx Descriptor into a Tx Status descriptor after
fully reading the descriptor. This involves clearing Tx Own (bit 31) to
indicate that the driver has ownership of the descriptor again as well
as several other bits.
The code keeps the first dword of the Tx Descriptor in the txdw0 local
variable. txdw0 is reused to build the first word of the Tx Status
descriptor. Later on the code uses txdw0 again, incorrectly assuming
that it still contains the first dword of the Tx Descriptor. The tx
offloading code misbehaves because it sees bogus bits in txdw0.
Use a separate local variable for Tx Status and preserve Tx Descriptor
in txdw0.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-2-stefanha@redhat.com>
Hi
Drop everything that is not a bug fix:
- fixes by peter
- fix comment on block creation (me)
- fix return values from qio_channel_block()
Please, apply.
(take 1)
It includes:
- Leonardo fix for zero_copy flush
- Fiona fix for return value of readv/writev
- Peter Xu cleanups
- Peter Xu preempt patches
- Patches ready from zero page (me)
- AVX2 support (ling)
- fix for slow networking and reordering of first packets (manish)
Please, apply.
-----BEGIN PGP SIGNATURE-----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=dosb
-----END PGP SIGNATURE-----
Merge tag 'next-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration PULL request (take 3)
Hi
Drop everything that is not a bug fix:
- fixes by peter
- fix comment on block creation (me)
- fix return values from qio_channel_block()
Please, apply.
(take 1)
It includes:
- Leonardo fix for zero_copy flush
- Fiona fix for return value of readv/writev
- Peter Xu cleanups
- Peter Xu preempt patches
- Patches ready from zero page (me)
- AVX2 support (ling)
- fix for slow networking and reordering of first packets (manish)
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmN7dhUACgkQ9IfvGFhy
# 1yN0GhAAmpBGFomPXqOhixXcZdCOpFvLVKU13O+okp2NgY9W5Qlicf6ANo0cbvUh
# VVLCnXToySbP+7TLLqZjT4mVgM6EUIk1xqUXXICJ1mXIznvMnMtnseMNX033E2RL
# mhIVx+2AsoClWR9AdQVrzvjwR/gmzEa915w1HnHVfLFSPWmIfd9iWvOEenf5SYY5
# R7yAq0tWohOAtPiyrFAchcyTidW7pB2ZqD85ZEuGQ6EBpPxHM2NZ46NuK52j02k3
# eKGrKBFAh4QTRf5+QT0ASAGUqxPYM3iT/WOw3FZkZDQoedcReeECgDh1gfdd27iH
# Rebn+UHThgofBAspFVrJs9rSVlOnDdDp7yY1YDC6s6285Dci9JyWe0raIyvfdBK7
# h+AtBFLZVkIR0LXu4NlVe4IHnO5t/XVsLPwZ+7SQ9fc3gezAn4kAiEf+m8umTgho
# n3Jo+2dl52QoMOW2OsX9199g0lorQAby6bJVG4xbq82ijE9N1NHuLe44w9OGZTKg
# 697cNPDaoSRrvAdCPPh5KaZXsxpfLPxoMlZWxCTsNvs/jCzGs7AnvbU0QHlB+skU
# R2Ae42QBq6ZSogtN8tNZFPH82Z6xTOJNILtmMgEQGAjLf3yOd8T5gZLsYNujTOyJ
# ZsahXU0yRTkGmCkzCyr//mGu4KEPWtDOq27QqQPFfayvhr16ECw=
# =dosb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 21 Nov 2022 07:59:01 EST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'next-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Block migration comment or code is wrong
migration: Disable multifd explicitly with compression
migration: Use non-atomic ops for clear log bitmap
migration: Disallow postcopy preempt to be used with compress
migration: Fix race on qemu_file_shutdown()
migration: Fix possible infinite loop of ram save process
migration/multifd/zero-copy: Create helper function for flushing
migration/channel-block: fix return value for qio_channel_block_{readv,writev}
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With LPA2, the effective output address size is at most 48 bits when
TCR.DS == 0. This case is currently unhandled in the page table walker,
where we happily assume LVA/64k granule when outputsize > 48 and
param.ds == 0, resulting in the wrong conversion to be used from a
page table descriptor to a physical address.
if (outputsize > 48) {
if (param.ds) {
descaddr |= extract64(descriptor, 8, 2) << 50;
} else {
descaddr |= extract64(descriptor, 12, 4) << 48;
}
So cap the outputsize to 48 when TCR.DS is cleared, as per the
architecture.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221116170316.259695-1-ardb@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The two tests
tests/avocado/boot_linux.py:BootLinuxAarch64.test_virt_tcg_gicv2
tests/avocado/boot_linux.py:BootLinuxAarch64.test_virt_tcg_gicv3
take quite a long time to run, and the current timeout of 240s
is not enough for the tests to complete on slow machines:
we've seen these tests time out in the gitlab CI in the
'avocado-system-alpine' CI job, for instance. The timeout
is also insufficient for running the test with a debug build
of QEMU: on my machine the tests take over 10 minutes to run
in that config.
Push the timeout up to 720s so that the test definitely has
enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
a66a24585f (hw/intc/arm_gic: Implement read of GICC_IIDR) implemented
this for the CPU interface register. The fact we don't implement it
shows up when running Xen with -d guest_error which is definitely
wrong because the guest is perfectly entitled to read it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gic_dist_readb was returning a word value which just happened to work
as a result of the way we OR the data together. Lets fix it so only
the explicit byte is returned for each part of GICD_TYPER. I've
changed the return type to uint8_t although the overflow is only
detected with an explicit -Wconversion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trying to run U-Boot for Cubieboard (Allwinner A10) fails because it cannot
access SD card. The problem is that FIFO register in current
allwinner-sdhost implementation is at the address corresponding to
Allwinner H3, but not A10.
Linux kernel is not affected since Linux driver uses DMA access and does
not use FIFO register for reading/writing.
This patch adds new class parameter `is_sun4i` and based on that
parameter uses register at offset 0x100 either as FIFO register (if
sun4i) or as threshold register (if not sun4i; in this case register at
0x200 is FIFO register).
Tested with U-Boot and Linux kernel image built for Cubieboard and
OrangePi PC.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221112214900.24152-1-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
And it appears that what is wrong is the code. During bulk stage we
need to make sure that some block is dirty, but no games with
max_size at all.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Multifd thread model does not work for compression, explicitly disable it.
Note that previuosly even we can enable both of them, nothing will go
wrong, because the compression code has higher priority so multifd feature
will just be ignored. Now we'll fail even earlier at config time so the
user should be aware of the consequence better.
Note that there can be a slight chance of breaking existing users, but
let's assume they're not majority and not serious users, or they should
have found that multifd is not working already.
With that, we can safely drop the check in ram_save_target_page() for using
multifd, because when multifd=on then compression=off, then the removed
check on save_page_use_compression() will also always return false too.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since we already have bitmap_mutex to protect either the dirty bitmap or
the clear log bitmap, we don't need atomic operations to set/clear/test on
the clear log bitmap. Switching all ops from atomic to non-atomic
versions, meanwhile touch up the comments to show which lock is in charge.
Introduced non-atomic version of bitmap_test_and_clear_atomic(), mostly the
same as the atomic version but simplified a few places, e.g. dropped the
"old_bits" variable, and also the explicit memory barriers.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The preempt mode requires the capability to assign channel for each of the
page, while the compression logic will currently assign pages to different
compress thread/local-channel so potentially they're incompatible.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In qemu_file_shutdown(), there's a possible race if with current order of
operation. There're two major things to do:
(1) Do real shutdown() (e.g. shutdown() syscall on socket)
(2) Update qemufile's last_error
We must do (2) before (1) otherwise there can be a race condition like:
page receiver other thread
------------- ------------
qemu_get_buffer()
do shutdown()
returns 0 (buffer all zero)
(meanwhile we didn't check this retcode)
try to detect IO error
last_error==NULL, IO okay
install ALL-ZERO page
set last_error
--> guest crash!
To fix this, we can also check retval of qemu_get_buffer(), but not all
APIs can be properly checked and ultimately we still need to go back to
qemu_file_get_error(). E.g. qemu_get_byte() doesn't return error.
Maybe some day a rework of qemufile API is really needed, but for now keep
using qemu_file_get_error() and fix it by not allowing that race condition
to happen. Here shutdown() is indeed special because the last_error was
emulated. For real -EIO errors it'll always be set when e.g. sendmsg()
error triggers so we won't miss those ones, only shutdown() is a bit tricky
here.
Cc: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When starting ram saving procedure (especially at the completion phase),
always set last_seen_block to non-NULL to make sure we can always correctly
detect the case where "we've migrated all the dirty pages".
Then we'll guarantee both last_seen_block and pss.block will be valid
always before the loop starts.
See the comment in the code for some details.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move flushing code from multifd_send_sync_main() to a new helper, and call
it in multifd_send_sync_main().
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
in the error case. The documentation in include/io/channel.h states
that -1 or QIO_CHANNEL_ERR_BLOCK should be returned upon error. Simply
passing along the return value from the bdrv-functions has the
potential to confuse the call sides. Non-blocking mode is not
implemented currently, so -1 it is.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>