This patch introduces a generic internal API for access control lists
to be used by network servers in QEMU. It adds support for checking
these ACL in the VNC server, in two places. The first ACL is for the
SASL authentication mechanism, checking the SASL username. This ACL
is called 'vnc.username'. The second is for the TLS authentication
mechanism, when x509 client certificates are turned on, checking against
the Distinguished Name of the client. This ACL is called 'vnc.x509dname'
The internal API provides for an ACL with the following characteristics
- A unique name, eg vnc.username, and vnc.x509dname.
- A default policy, allow or deny
- An ordered series of match rules, with allow or deny policy
If none of the match rules apply, then the default policy is
used.
There is a monitor API to manipulate the ACLs, which I'll describe via
examples
(qemu) acl show vnc.username
policy: allow
(qemu) acl policy vnc.username denya
acl: policy set to 'deny'
(qemu) acl allow vnc.username fred
acl: added rule at position 1
(qemu) acl allow vnc.username bob
acl: added rule at position 2
(qemu) acl allow vnc.username joe 1
acl: added rule at position 1
(qemu) acl show vnc.username
policy: deny
0: allow fred
1: allow joe
2: allow bob
(qemu) acl show vnc.x509dname
policy: allow
(qemu) acl policy vnc.x509dname deny
acl: policy set to 'deny'
(qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=*
acl: added rule at position 1
(qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob
acl: added rule at position 2
(qemu) acl show vnc.x509dname
policy: deny
0: allow C=GB,O=ACME,L=London,CN=*
1: allow C=GB,O=ACME,L=Boston,CN=bob
By default the VNC server will not use any ACLs, allowing access to
the server if the user successfully authenticates. To enable use of
ACLs to restrict user access, the ',acl' flag should be given when
starting QEMU. The initial ACL activated will be a 'deny all' policy
and should be customized using monitor commands.
eg enable SASL auth and ACLs
qemu .... -vnc localhost:1,sasl,acl
The next patch will provide a way to load a pre-defined ACL when
starting up
Makefile | 6 +
b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
b/acl.h | 74 ++++++++++++++++++++++
configure | 18 +++++
monitor.c | 95 ++++++++++++++++++++++++++++
qemu-doc.texi | 49 ++++++++++++++
vnc-auth-sasl.c | 16 +++-
vnc-auth-sasl.h | 7 ++
vnc-tls.c | 19 +++++
vnc-tls.h | 3
vnc.c | 21 ++++++
vnc.h | 3
12 files changed, 491 insertions(+), 5 deletions(-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds the new SASL authentication protocol to the VNC server.
It is enabled by setting the 'sasl' flag when launching VNC. SASL can
optionally provide encryption via its SSF layer, if a suitable mechanism
is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is
not available, then it should be combined with the x509 VNC authentication
protocol which provides encryption.
eg, if using GSSAPI
qemu -vnc localhost:1,sasl
eg if using TLS/x509 for encryption
qemu -vnc localhost:1,sasl,tls,x509
By default the Cyrus SASL library will look for its configuration in
the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden
by setting the SASL_CONF_PATH environment variable, eg to make it look in
$HOME/.sasl2. NB unprivileged users may not have access to the full range
of SASL mechanisms, since some of them require some administrative privileges
to configure. The patch includes an example SASL configuration file which
illustrates config for GSSAPI and Digest-MD5, though it should be noted that
the latter is not really considered secure any more.
Most of the SASL authentication code is located in a separate source file,
vnc-auth-sasl.c. The main vnc.c file only contains minimal integration
glue, specifically parsing of command line flags / setup, and calls to
start the SASL auth process, to do encoding/decoding for data.
There are several possible stacks for reading & writing of data, depending
on the combo of VNC authentication methods in use
- Clear. read/write straight to socket
- TLS. read/write via GNUTLS helpers
- SASL. encode/decode via SASL SSF layer, then read/write to socket
- SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS
Hence, the vnc_client_read & vnc_client_write methods have been refactored
a little.
vnc_client_read: main entry point for reading, calls either
- vnc_client_read_plain reading, with no intermediate decoding
- vnc_client_read_sasl reading, with SASL SSF decoding
These two methods, then call vnc_client_read_buf(). This decides
whether to write to the socket directly or write via GNUTLS.
The situation is the same for writing data. More extensive comments
have been added in the code / patch. The vnc_client_read_sasl and
vnc_client_write_sasl method implementations live in the separate
vnc-auth-sasl.c file.
The state required for the SASL auth mechanism is kept in a separate
VncStateSASL struct, defined in vnc-auth-sasl.h and included in the
main VncState.
The configure script probes for SASL and automatically enables it
if found, unless --disable-vnc-sasl was given to override it.
Makefile | 7
Makefile.target | 5
b/qemu.sasl | 34 ++
b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++
b/vnc-auth-sasl.h | 67 +++++
configure | 34 ++
qemu-doc.texi | 97 ++++++++
vnc-auth-vencrypt.c | 12
vnc.c | 249 ++++++++++++++++++--
vnc.h | 31 ++
10 files changed, 1129 insertions(+), 33 deletions(-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
Resent with fixed formatting.
This patch adds two new command line options:
-chroot <dir>
-runas <user>
This is useful for running qemu as an unprivileged user in a chroot
jail. To avoid having to populate the jail, chrooting happens right
before the start of guest execution.
Signed-off-by: Nolan Leake <nolan@sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6652 c046a42c-6fe2-441c-8c8c-71466251a162
This is needed to dynamically add SLIC tables with Windows
activation keys.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6650 c046a42c-6fe2-441c-8c8c-71466251a162
Adds "msmouse" character device, which emulates a serial mouse.
Use it with -serial msmouse.
Signed-Off-By: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6559 c046a42c-6fe2-441c-8c8c-71466251a162
Support all kinds of pci vga cards (including none)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6557 c046a42c-6fe2-441c-8c8c-71466251a162
Rearrange code, help printout and docs so that they are in the same
(hopefully more logical) order for easier maintenance.
Add help and docs for undocumented options.
Reformat slightly for more consistent help output.
Add comments to encourage better synchronization in the future.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6432 c046a42c-6fe2-441c-8c8c-71466251a162
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the
fix much more localized and only fix the problem for RTC time
source. Unfortunately it is impossible to fix the problem entirely
inside RTC code like Andrzej proposed since Windows reads RTC
register C more then once on each time interrupt so it is impossible
to count reliably how many interrupt windows actually handled.
Proposed solution is localized to I386 target and is disabled by
default. To enable it "-rtc-td-hack" flag should be used.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6320 c046a42c-6fe2-441c-8c8c-71466251a162
Allow the user to supply a vlan client name on the command line.
This is probably only useful for management tools so that they can
use their own names rather than parsing the output of 'info network'.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
Windows calculates HW "uniqueness" based on a hard drive serial number
among other things. The patch allows to specify drive serial number
from a command line.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6214 c046a42c-6fe2-441c-8c8c-71466251a162
The TSC2102 chip is not included in documentation because a patch is
pending.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6038 c046a42c-6fe2-441c-8c8c-71466251a162
This allows easier use of the change vnc password monitor command from
management scripts, without having to implement expect(1)-like behaviour.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5967 c046a42c-6fe2-441c-8c8c-71466251a162
qcow2 writes a cluster reference count on every cluster update. This causes
performance to crater when using anything but cache=writeback. This is most
noticeable when using savevm. Right now, qcow2 isn't a reliable format
regardless of the type of cache your using because metadata is not updated in
the correct order. Considering this, I think it's somewhat reasonable to use
writeback caching by default with qcow2 files.
It at least avoids the massive performance regression for users until we sort
out the issues in qcow2.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5879 c046a42c-6fe2-441c-8c8c-71466251a162
Virtio-blk is a paravirtual block device based on VirtIO. It can be used by
specifying the if=virtio parameter to the -drive parameter.
When using -enable-kvm, it can achieve very good performance compared to IDE or
SCSI.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5870 c046a42c-6fe2-441c-8c8c-71466251a162
Minor fixes of spelling and grammar in comments and documentation
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5835 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the cache= option to accept none, writeback, or writethough
to control the host page cache behavior. By default, writethrough caching is
now used which internally is implemented by using O_DSYNC to open the disk
images. When using -snapshot, writeback is used by default since data integrity
it not at all an issue.
cache=none has the same behavior as cache=off previously. The later syntax is
still supported by now deprecated. I also cleaned up the O_DIRECT
implementation to avoid many of the #ifdefs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5485 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of having (current)three command line switches -std-vga,
-cirrusvga and -vmwarevga, provide one -vga switch which takes
an argument, so that:
qemu -std-vga becomes qemu -vga std
qemu -cirrusvga becomes qemu -vga cirrus
qemu -vmwarevga becomes qemu -vga vmware
Update documentation accordingly.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5335 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of having separate option for each card and driver use
--audio-drv-list and --audio-card-list options.
Under Linux it allows to set the default(first probed) driver
to something other than OSS.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4792 c046a42c-6fe2-441c-8c8c-71466251a162
Hopefully someday will be merged with cs4231.c (SPARC version)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4741 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows the qemu backend debugger to single step an
instruction without running the hardware interrupts.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4391 c046a42c-6fe2-441c-8c8c-71466251a162
It is possible for a guest with a raw formatted disk image to write a
header to that disk image describing another format (such as qcow2).
Stopping and subsequent restart of the guest will cause qemu to detect
that format, and could allow the guest to read any host file if qemu is
sufficiently privileged (typical in virt environments).
The patch defaults to existing behaviour (probing based on file contents),
so it still requires the mgmt app (e.g. libvirt xml) to pass a new
"format=raw" parameter for raw disk images.
Originally noted by Avi Kivity, patch from Chris Wright.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4277 c046a42c-6fe2-441c-8c8c-71466251a162
Applied %s/^\([^I ]*\)^I/\1 /g on e1000.c and added e1000 to help message.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3949 c046a42c-6fe2-441c-8c8c-71466251a162
Implement chr_close callback for "stdio" so that it can be closed and reopened.
Free chr devices after they're closed.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3927 c046a42c-6fe2-441c-8c8c-71466251a162
Insert a list of missing memory mappings from OMAP310 datasheet.
Add missing "rtc" field for RTC.
Correct PWL and PWT register read/write handler pointers.
Add a Changelog entry about OMAP emulation.
Add a qemu-doc snippet about Palm T|E platform.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3516 c046a42c-6fe2-441c-8c8c-71466251a162
this isn't true, and we probably don't want to make it true by grabbing
namespace which might be used by cygwin.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3080 c046a42c-6fe2-441c-8c8c-71466251a162
patch is sound, but the implementation is just too ugly.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2309 c046a42c-6fe2-441c-8c8c-71466251a162
