AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged
so for user-mode emulation we must provide the value that the kernel
places in the MSR. For Linux, it is a combination of the current CPU
and the current NUMA node, both of which can be retrieved with getcpu(2).
Also try sched_getcpu(), which might be there on the BSDs. If there is
no portable way to retrieve the current CPU id from userspace, return 0.
RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms
of serializability are not relevant to QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVEERPTR is actually a fix for an errata; TCG does not have the issue.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is
secure enough to match hardware behavior. Expose it to guests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A regression has been detected in latency testing of KVM guests.
More specifically, it was observed that the cyclictest
numbers inside of an isolated vcpu (running on isolated pcpu) are:
Where a maximum of 50us is acceptable.
The implementation of KVM_GET_STATS_FD uses run_on_cpu to query
per vcpu statistics, which interrupts the vcpu (and is unnecessary).
To fix this, open the per vcpu stats fd on vcpu initialization,
and read from that fd from QEMU's main thread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some architectures like ARM64, multiple CPUs in one cluster can be
associated with different NUMA nodes, which is irregular configuration
because we shouldn't have this in baremetal environment. The irregular
configuration causes Linux guest to misbehave, as the following warning
messages indicate.
-smp 6,maxcpus=6,sockets=2,clusters=1,cores=3,threads=1 \
-numa node,nodeid=0,cpus=0-1,memdev=ram0 \
-numa node,nodeid=1,cpus=2-3,memdev=ram1 \
-numa node,nodeid=2,cpus=4-5,memdev=ram2 \
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/sched/topology.c:2271 build_sched_domains+0x284/0x910
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-268.el9.aarch64 #1
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : build_sched_domains+0x284/0x910
lr : build_sched_domains+0x184/0x910
sp : ffff80000804bd50
x29: ffff80000804bd50 x28: 0000000000000002 x27: 0000000000000000
x26: ffff800009cf9a80 x25: 0000000000000000 x24: ffff800009cbf840
x23: ffff000080325000 x22: ffff0000005df800 x21: ffff80000a4ce508
x20: 0000000000000000 x19: ffff000080324440 x18: 0000000000000014
x17: 00000000388925c0 x16: 000000005386a066 x15: 000000009c10cc2e
x14: 00000000000001c0 x13: 0000000000000001 x12: ffff00007fffb1a0
x11: ffff00007fffb180 x10: ffff80000a4ce508 x9 : 0000000000000041
x8 : ffff80000a4ce500 x7 : ffff80000a4cf920 x6 : 0000000000000001
x5 : 0000000000000001 x4 : 0000000000000007 x3 : 0000000000000002
x2 : 0000000000001000 x1 : ffff80000a4cf928 x0 : 0000000000000001
Call trace:
build_sched_domains+0x284/0x910
sched_init_domains+0xac/0xe0
sched_init_smp+0x48/0xc8
kernel_init_freeable+0x140/0x1ac
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
Improve the situation to warn when multiple CPUs in one cluster have
been associated with different NUMA nodes. However, one NUMA node is
allowed to be associated with different clusters.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit b0fcc6fc7f ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7f.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
=8zCK
-----END PGP SIGNATURE-----
Merge tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Add (experimental) support for FEAT_RME
* host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
* target/arm: Restructure has_vfp_d32 test
* hw/arm/sbsa-ref: add ITS support in SBSA GIC
* target/arm: Fix sve predicate store, 8 <= VQ <= 15
* pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
-----BEGIN PGP SIGNATURE-----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=Q2Ei
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230623' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Add (experimental) support for FEAT_RME
* host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
* target/arm: Restructure has_vfp_d32 test
* hw/arm/sbsa-ref: add ITS support in SBSA GIC
* target/arm: Fix sve predicate store, 8 <= VQ <= 15
* pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSVkGcZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3tUZEACGBkfRmEa3CRVdOzRWeJS8
# vcvcHEVDUVBTMKvpBah5YC5mK8fx040fymoSiYtxiWyf4l7U2Zr/kYouIbqos5Wy
# KW6It3Sq2IXHdl0n34D1GAWXujcJp/RP+jt+SZy1cWv9aPOy0xOpofMusytkLLeT
# 4+8il6t8eGDVxqBam5jwTi2vskosP4IsDmuqZk4/o3Yg5Gg2NGFaS+SMf/V5pJSv
# M/aH09sYtsTMoAIihpGbQsQeUtUjRXijr/WOKKwa4LeDd/abA7ZTiIGkfkzCOxOa
# 82LmoSFarIkfe5xgtfF3DArkN+ajvrJHLbsB0PwuYFqjSUAfcB7gs4r+I7IdvjN+
# hdY2oTxa8nDerPDdiW61i4xg6qtNRc87l/y2qX6xMrqBEQ743V/e/4cNsGLsLxou
# R1iHq2R8LZ00051pZeXYrOUW3Bu6GK/b30nDFgTb4uLStA/OtlXKWspeGj4JIgzi
# 04xwndUMbq6eZp89BDHc52AEF9SreCz8/YVu32W1JWvRgGWV1uv6E5rYQMXsrf/3
# CVNVBOyNeDuGcKNaXGFd2bvpebyEMbtM29kpYP8Xl6YFDdopC2J99NZS+829c+/w
# Zl6gVTEpWOOIYif/z2VgwP74MvMDxSRsuyfxNei+eAnkoIDXpMdRvQZDRqbvooU6
# nIFnyoEgiDX051C9UZa+mg==
# =Q2Ei
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 23 Jun 2023 02:30:31 PM CEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20230623' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
target/arm: Fix sve predicate store, 8 <= VQ <= 15
hw/arm/sbsa-ref: add ITS support in SBSA GIC
target/arm: Restructure has_vfp_d32 test
host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
docs/system/arm: Document FEAT_RME
target/arm: Add cpu properties for enabling FEAT_RME
target/arm: Implement the granule protection check
target/arm: Implement GPC exceptions
target/arm: Add GPC syndrome
target/arm: Use get_phys_addr_with_struct for stage2
target/arm: Move s1_is_el0 into S1Translate
target/arm: Use get_phys_addr_with_struct in S1_ptw_translate
target/arm: Handle no-execute for Realm and Root regimes
target/arm: Handle Block and Page bits for security space
target/arm: NSTable is RES0 for the RME EL3 regime
target/arm: Pipe ARMSecuritySpace through ptw.c
target/arm: Remove __attribute__((nonnull)) from ptw.c
target/arm: Introduce ARMMMUIdx_Phys_{Realm,Root}
target/arm: Adjust the order of Phys and Stage2 ARMMMUIdx
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Signed-off-by: Helge Deller <deller@gmx.de>
Give current QEMU version string to SeaBIOS-hppa via fw_cfg interface so
that the firmware can show the QEMU version in the boot menu info.
Signed-off-by: Helge Deller <deller@gmx.de>
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Signed-off-by: Helge Deller <deller@gmx.de>
The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
470ad2cd8f
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
Brown bag time: store instead of load results in uninitialized temp.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620134659.817559-1-richard.henderson@linaro.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create ITS as part of SBSA platform GIC initialization.
GIC ITS information is in DeviceTree so TF-A can pass it to EDK2.
Bumping platform version to 0.2 as this is important hardware change.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org
Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One cannot test for feature aa32_simd_r32 without first
testing if AArch32 mode is supported at all. This leads to
qemu-system-aarch64: ARM CPUs must have both VFP-D32 and Neon or neither
for Apple M1 cpus.
We already have a check for ARMv8-A never setting vfp-d32 true,
so restructure the code so that AArch64 avoids the test entirely.
Reported-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mads Ynddal <m.ynddal@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Mads Ynddal <m.ynddal@samsung.com>
Message-id: 20230619140216.402530-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We use __builtin_subcll() to do a 64-bit subtract with borrow-in and
borrow-out when the host compiler supports it. Unfortunately some
versions of Apple Clang have a bug in their implementation of this
intrinsic which means it returns the wrong value. The effect is that
a QEMU built with the affected compiler will hang when emulating x86
or m68k float80 division.
The upstream LLVM issue is:
https://github.com/llvm/llvm-project/issues/55253
The commit that introduced the bug apparently never made it into an
upstream LLVM release without the subsequent fix
fffb6e6afd
but unfortunately it did make it into Apple Clang 14.0, as shipped
in Xcode 14.3 (14.2 is reported to be OK). The Apple bug number is
FB12210478.
Add ifdefs to avoid use of __builtin_subcll() on Apple Clang version
14 or greater. There is not currently a version of Apple Clang which
has the bug fix -- when one appears we should be able to add an upper
bound to the ifdef condition so we can start using the builtin again.
We make the lower bound a conservative "any Apple clang with major
version 14 or greater" because the consequences of incorrectly
disabling the builtin when it would work are pretty small and the
consequences of not disabling it when we should are pretty bad.
Many thanks to those users who both reported this bug and also
did a lot of work in identifying the root cause; in particular
to Daniel Bertalan and osy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1631
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1659
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Bertalan <dani@danielbertalan.dev>
Tested-by: Tested-By: Solra Bizna <solra@bizna.name>
Message-id: 20230622130823.1631719-1-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230622143046.1578160-1-richard.henderson@linaro.org
[PMM: fixed typo; note experimental status in emulation.rst too]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an x-rme cpu property to enable FEAT_RME.
Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ,
for testing various possible configurations.
We're not currently completely sure whether FEAT_RME will
be OK to enable purely as a CPU-level property, or if it will
need board co-operation, so we're making these experimental
x- properties, so that the people developing the system
level software for RME can try to start using this and let
us know how it goes. The command line syntax for enabling
this will change in future, without backwards-compatibility.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place the check at the end of get_phys_addr_with_struct,
so that we check all physical results.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle GPC Fault types in arm_deliver_fault, reporting as
either a GPC exception at EL3, or falling through to insn
or data aborts at various exception levels.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function takes the fields as filled in by
the Arm ARM pseudocode for TakeGPCException.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in which we failed to initialize
the result attributes properly after the memset.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing this to get_phys_addr_lpae, stash it
in the S1Translate structure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not provide a fast-path for physical addresses,
as those will need to be validated for GPC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While Root and Realm may read and write data from other spaces,
neither may execute from other pa spaces.
This happens for Stage1 EL3, EL2, EL2&0, and Stage2 EL1&0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Realm security state, bit 55 of a block or page descriptor during
the stage2 walk becomes the NS bit; during the stage1 walk the bit 5
NS bit is RES0. With Root security state, bit 11 of the block or page
descriptor during the stage1 walk becomes the NSE bit.
Rather than collecting an NS bit and applying it later, compute the
output pa space from the input pa space and unconditionally assign.
This means that we no longer need to adjust the output space earlier
for the NSTable bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test in_space instead of in_secure so that we don't
switch out of Root space.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add input and output space members to S1Translate. Set and adjust
them in S1_ptw_translate, and the various points at which we drop
secure state. Initialize the space in get_phys_addr; for now leave
get_phys_addr_with_secure considering only secure vs non-secure spaces.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was added in 7e98e21c09 as part of a reorg in which
one of the argument had been legally NULL, and this caught
actual instances. Now that the reorg is complete, this
serves little purpose.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_RME, there are four physical address spaces.
For now, just define the symbols, and mention them in
the same spots as the other Phys indexes in ptw.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be helpful to have ARMMMUIdx_Phys_* to be in the same
relative order as ARMSecuritySpace enumerators. This requires
the adjustment to the nstable check. While there, check for being
in secure state rather than rely on clearing the low bit making
no change to non-secure state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need 2 bits to represent ARMSecurityState.
Do not attempt to replace or widen secure, even though it
logically overlaps the new field -- there are uses within
e.g. hw/block/pflash_cfi01.c, which don't know anything
specific about ARM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce both the enumeration and functions to retrieve
the current state, and state outside of EL3.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes GPCCR, GPTBR, MFAR, the TLB flush insns PAALL, PAALLOS,
RPALOS, RPAOS, and the cache flush insns CIPAPA and CIGDPAPA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With RME, SEL2 must also be present to support secure state.
The NS bit is RES1 if SEL2 is not present.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define the missing SCR and HCR bits, allow SCR_NSE and {SCR,HCR}_GPF
to be set, and invalidate TLBs when NSE changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the missing field for ID_AA64PFR0, and the predicate.
Disable it if EL3 is forced off by the board or command-line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Analysis of the MacOS toolbox ROM code shows that on startup it attempts 2
separate reads of the seconds registers with commands 0x9d...0x91 followed by
0x8d..0x81 without resetting the command to its initial value. The PRAM seconds
value is only accepted when the values of the 2 separate reads match.
From this we conclude that bit 4 of the rtc command is not decoded or we don't
care about its value when reading the PRAM seconds registers. Implement this
decoding change so that both reads return successfully which allows the MacOS
toolbox ROM to correctly set the date/time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
