Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As part of the required changes, this fixes a bug where specifying an
invalid driver would result in the block layer probing the image format;
now it will result in an error, unless "<unset>" is specified as the
driver name. Fixing this would require further work on the xen_disk code
which does not seem worth it (at this point and for this patch).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Due to different error propagation, this breaks tests 051 and 087; fix
their output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While specifying a different driver and format is obviously invalid,
specifying the same driver once through driver and once through format
is invalid as well. Add a test for it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The argument given to bdrv_find_protocol() is just a file name, which
makes it difficult for the caller to reconstruct what protocol
bdrv_find_protocol() was hoping to find. This patch adds an Error
parameter to that function to solve this issue.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
blk_new_with_bs() creates a BlockBackend with an empty BlockDriverState
attached to it. Empty BDSs are not nice, therefore add an alternative
function which combines blk_new_with_bs() with bdrv_open().
Note: In contrast to bdrv_open() which takes a BlockDriver parameter,
blk_new_open() does not take such a parameter. This is because
bdrv_open() opens a BlockDriverState, therefore it is natural to be able
to set the BlockDriver for that BDS. The fact that bdrv_open() can open
more than a single BDS is merely some form of a byproduct.
blk_new_open() on the other hand is intended to be used to create a
whole tree of BlockDriverStates. Therefore, setting a single BlockDriver
does not make much sense. Instead, the drivers to be used for each of
the nodes must be configured through the "options" QDict; including the
driver of the root BDS.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1423162705-32065-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Create the blk_* counterparts for the following bdrv_* functions (which
make sense to call on the BlockBackend level):
- bdrv_co_write_zeroes()
- bdrv_write_compressed()
- bdrv_truncate()
- bdrv_nb_sectors()
- bdrv_discard()
- bdrv_load_vmstate()
- bdrv_save_vmstate()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423666727-20777-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If -n is specified, it does not matter whether the output format and
protocol support image creation; building the creation options should
simply be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423666727-20777-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This case utilizes qemu-io command "aio_{read,write} -q" to verify the
effectiveness of IO throttling options.
It's implemented by driving the vm timer from qtest protocol, so the
throttling timers are signaled with determinied time duration. Then we
verify the completed IO requests are within 10% error of bps and iops
limits.
"null" protocol is used as the disk backend so that no actual disk IO is
performed on host, this will make the blockstats much more
deterministic. Both "null-aio" and "null-co" are covered, which is also
a simple cross validation test for the driver code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QMP command "block_set_io_throttle" expects underscores in parameters
instead of dashes: {iops,bps}_{rd,wr,max}.
Add optional argument conv_keys (defaults to True, backward compatible),
it will be used in IO throttling test case.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow test cases to run command in qtest protocol. It's
write-only for now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds scripts/qtest.py as a python library for qtest protocol.
This is a skeleton with a basic "cmd" method to execute a command,
reading and parsing of qtest output could be added later on demand.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will enable accounting of aio requests issued from qemu-io aio
read/write commands.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_clock_run_timers() only takes care of main_loop_tlg, we shouldn't
forget aio timer list groups.
Currently, the qemu_clock_deadline_ns_all (a few lines above) counts all
the timergroups of this clock type, including aio tlg, but we don't fire
them, so they are never cleared, which makes a dead loop.
For example, this function hangs when trying to drive throttled block
request queue with qtest clock_step.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421661103-29153-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The size compared should be PATH_MAX, rather than sizeof(char *).
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 46d873261433f4527e88885582f96942d61758d6.1423592487.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an internal snapshot can't be saved because migration is blocked
(most commonly probably because of AHCI), we had a really bad error
message:
$ echo -e "savevm foo\nquit" | qemu -M q35 /tmp/test.qcow2 -monitor stdio
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) savevm foo
Error -22 while writing VM
(qemu) quit
This patch converts qemu_savevm_state() to the Error infrastructure so
that a useful error pointing to the problematic device is produced now:
$ echo -e "savevm foo\nquit" | qemu -M q35 /tmp/test.qcow2 -monitor stdio
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) savevm foo
State blocked by non-migratable device '0000:00:1f.2/ich9_ahci'
(qemu) quit
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423574702-23072-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When we tested the VM migartion between different hosts with NBD
devices, we found if we sent a cancel command after the drive_mirror
was just started, a coroutine re-enter error would occur. The stack
was as follow:
(gdb) bt
00) 0x00007fdfc744d885 in raise () from /lib64/libc.so.6
01) 0x00007fdfc744ee61 in abort () from /lib64/libc.so.6
02) 0x00007fdfca467cc5 in qemu_coroutine_enter (co=0x7fdfcaedb400, opaque=0x0)
at qemu-coroutine.c:118
03) 0x00007fdfca467f6c in qemu_co_queue_run_restart (co=0x7fdfcaedb400) at
qemu-coroutine-lock.c:59
04) 0x00007fdfca467be5 in coroutine_swap (from=0x7fdfcaf3c4e8,
to=0x7fdfcaedb400) at qemu-coroutine.c:96
05) 0x00007fdfca467cea in qemu_coroutine_enter (co=0x7fdfcaedb400, opaque=0x0)
at qemu-coroutine.c:123
06) 0x00007fdfca467f6c in qemu_co_queue_run_restart (co=0x7fdfcaedbdc0) at
qemu-coroutine-lock.c:59
07) 0x00007fdfca467be5 in coroutine_swap (from=0x7fdfcaf3c4e8,
to=0x7fdfcaedbdc0) at qemu-coroutine.c:96
08) 0x00007fdfca467cea in qemu_coroutine_enter (co=0x7fdfcaedbdc0, opaque=0x0)
at qemu-coroutine.c:123
09) 0x00007fdfca4a1fa4 in nbd_recv_coroutines_enter_all (s=0x7fdfcaef7dd0) at
block/nbd-client.c:41
10) 0x00007fdfca4a1ff9 in nbd_teardown_connection (client=0x7fdfcaef7dd0) at
block/nbd-client.c:50
11) 0x00007fdfca4a20f0 in nbd_reply_ready (opaque=0x7fdfcaef7dd0) at
block/nbd-client.c:92
12) 0x00007fdfca45ed80 in aio_dispatch (ctx=0x7fdfcae15e90) at aio-posix.c:144
13) 0x00007fdfca45ef1b in aio_poll (ctx=0x7fdfcae15e90, blocking=false) at
aio-posix.c:222
14) 0x00007fdfca448c34 in aio_ctx_dispatch (source=0x7fdfcae15e90, callback=0x0,
user_data=0x0) at async.c:212
15) 0x00007fdfc8f2f69a in g_main_context_dispatch () from
/usr/lib64/libglib-2.0.so.0
16) 0x00007fdfca45c391 in glib_pollfds_poll () at main-loop.c:190
17) 0x00007fdfca45c489 in os_host_main_loop_wait (timeout=1483677098) at
main-loop.c:235
18) 0x00007fdfca45c57b in main_loop_wait (nonblocking=0) at main-loop.c:484
19) 0x00007fdfca25f403 in main_loop () at vl.c:2249
20) 0x00007fdfca266fc2 in main (argc=42, argv=0x7ffff517d638,
envp=0x7ffff517d790) at vl.c:4814
We find the nbd_recv_coroutines_enter_all function (triggered by a cancel
command or a network connection breaking down) will enter a coroutine which
is waiting for the sending lock. If the lock is still held by another coroutine,
the entering coroutine will be added into the co_queue again. Latter, when the
lock is released, a coroutine re-enter error will occur.
This bug can be fixed simply by delaying the setting of recv_coroutine as
suggested by paolo. After applying this patch, we have tested the cancel
operation in mirror phase looply for more than 5 hous and everything is fine.
Without this patch, a coroutine re-enter error will occur in 5 minutes.
Signed-off-by: Bn Wu <wu.wubin@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423552846-3896-1-git-send-email-wu.wubin@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds a test case for AHCI wherein we write a 4K
block of a changing pattern to sector 0, then
read back that 4K and compare the transmit and
receive buffers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-20-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A minor sanity check to assert that the sector size is 512.
The current block layer code deeply assumes that the IDE
sector size will be 512 bytes, so we carry forward that assumption
here.
This is useful for the DMA tests, which currently assume that
a sector will always be 512 bytes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-19-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up guest memory being used in ahci_clean_mem, to be
called during ahci_shutdown. With all guest memory leaks removed,
add an option to the allocator to throw an assertion if a leak
occurs.
This test adds some sanity to both the AHCI library and the
allocator.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ahci_io is a wrapper around ahci_guest_io that takes a pointer to host
memory instead, and will create a guest memory buffer and copy the data
to/from as needed and as appropriate for a read/write command, such that
after a read, the guest data will be in a host buffer, and for a write,
the data will be transmitted to guest memory prior to the block operation.
Now that we have all the syntactic sugar functions in place for AHCI,
we can convert the identify test to be very, very short.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-17-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ahci_guest_io is a shorthand function that will, in one shot,
execute a data command on the guest to the specified guest buffer
location, in the requested amount.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds setters for size, prd_size and both via set_sizes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Helps to verify that a command completed successfully.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the AHCICommand structure, and a set of functions to
operate on the structure.
ahci_command_create - Initialize and create a new AHCICommand in memory
ahci_command_free - Destroy this object.
ahci_command_set_buffer - Set where the guest memory DMA buffer is.
ahci_command_commit - Write this command to the AHCI HBA.
ahci_command_issue - Issue the committed command synchronously.
ahci_command_issue_async - Issue the committed command asynchronously.
ahci_command_wait - Wait for an asynchronous command to finish.
ahci_command_slot - Get the number of the command slot we committed to.
Helpers:
size_to_prdtl - Calculate the required minimum PRDTL size from
a buffer size.
ahci_command_find - Given an ATA command mnemonic, look it up in the
properties table to obtain info about the command.
command_header_init - Initialize the command header with sane values.
command_table_init - Initialize the command table with sane values.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
warning:
tests/libqos/ahci.c:598:3: warning: redefinition
of typedef 'AHCICommand' is a C11 feature
[-Wtypedef-redefinition]
} AHCICommand;
I have replaced typedef struct ... AHCICommand; with struct ... ;
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a structure that defines some properties of various IDE commands.
These will be used to simplify the interface to the libqos AHCI calls,
lessening the redundancy of specifying and respecifying properties of
commands to various helper functions.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Similar to ahci_set_command_header, add a helper that takes an
in-memory representation of a command FIS and writes it to guest
memory, handling endianness as-needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add human-readable command names and other miscellaneous #defines
to help make the code more readable.
Some of these definitions are not yet used in this current series,
but for convenience and sanity they have been lumped together here,
as it's more trouble than it is worth in a test suite to hand-pick,
one-by-one, which preprocessor definitions are useful per-each test.
These definitions include:
ATA Command Mnemonics
Current expected AHCI sector size
FIS magic bytes
REG_H2D_FIS flags
Command Header flags
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a few helpers to help sanity-check the response of the
AHCI device after a command.
ahci_d2h_check_sanity inspects the D2H Register FIS,
ahci_pio_check_sanity inspects the PIO Setup FIS, and
ahci_cmd_check_sanity inspects the command header.
To support the PIO sanity check, a new structure is added for the
PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their
members renamed slightly to condense reserved members into fewer
fields; and LBA fields are now represented by arrays of 8 byte chunks
instead of independent variables.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A simple helper that asserts a given port is not busy processing any
commands via the TFD, Command Issue and SACT registers.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A helper that compares a given port's current interrupts and checks them
against a supplied list of expected interrupt bits, and throws an error
if they do not match.
The helper then resets the requested interrupts on this port, and asserts
that the interrupt register is now empty.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ahci_port_check_error checks a given port's error registers and asserts
that everything from the port-level view is still OK.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds command header helper functions:
-ahci_command_header_set
-ahci_command_header_get,
-ahci_command_destroy, and
-ahci_cmd_pick
These helpers help to quickly manage the command header information in
the AHCI device.
ahci_command_header_set and get will store or retrieve an AHCI command
header, respectively.
ahci_cmd_pick chooses the first available but least recently used
command slot to allow us to cycle through the available command slots.
ahci_command_destroy obliterates all information contained within a
given slot's command header, and frees its associated command table,
but not its DMA buffer!
Lastly, the command table pointer fields (dba and dbau) are merged into
a single 64bit value to make managing 64bit tests simpler.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The structure name is a bit of a misnomer; the structure currently named
command is actually the commandheader. A future patch in this series
will add an actual "Command" structure, so we'll rename it now before the
rest of the functions in this series try to use it.
In addition, rename the "b1" and "b2" fields
to be a unified uint16_t named "flags."
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a helper that assists in clearing out potentially old error and FIS
information from an AHCI port's data structures. This ensures we always
start with a blank slate for interrupt and FIS receipt information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This helper identifies which port of the
AHCI HBA has a device we may run tests on.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vring.c code currently assumes that guest and host endianness match,
which is not true for a number of cases:
- emulating targets with a different endianness than the host
- bi-endian targets, where the correct endianness depends on the virtio
device
- upcoming support for the virtio-1 standard mandates little-endian
accesses even for big-endian targets and hosts
Make sure to use accessors that depend on the virtio device.
Note that dataplane now needs to be built per-target.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1422289602-17874-2-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With global state removed, code responsible for booting up,
verifying, and initializing the AHCI HBA is extracted and
inserted into libqos/ahci.c, which would allow for other
qtests in the future to quickly grab a meaningfully initialized
reference to an AHCI HBA.
Even without other users, functionalizing and isolating the code
assists future AHCI tests that exercise Q35 migration.
For now, libqos/ahci.o will be PC-only, but can be expanded into
something arch-agnostic in the future, if needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of re-querying the AHCI device for the FB and CLB buffers, save
the pointer we gave to the device during initialization and reference
these values instead.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
compiler warnings:
tests/libqos/ahci.c:256:40: warning: format specifies type 'unsigned
long' but the argument has type 'uint64_t'
(aka 'unsigned long long') [-Wformat]
g_test_message("CLB: 0x%08lx", ahci->port[i].clb);
tests/libqos/ahci.c:264:39: warning: format specifies type 'unsigned
long' but the argument has type 'uint64_t'
(aka 'unsigned long long') [-Wformat]
g_test_message("FB: 0x%08lx", ahci->port[i].fb);
The commit moved from uint32_t to uint64_t, so PRIx64 should be used for
the format specifier.
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These macros were a bad idea: They relied upon certain arguments being
present locally with a specific name.
With the endgoal being to factor out AHCI helper functions outside of
the test file itself, these have to be replaced by more explicit helper
setter/getter functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a set of "static inline" register helpers that are intended to
replace the current set of macros with more functional versions that are
better suited to inclusion in libqos than porcelain macros.
As a stopgap measure before eliminating the porcelain macros, define them
to use the new functions defined in the ahci.h header.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make helper routines rely on the earmarked
guest allocator object with AHCIQState/QOSSTate instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rely on the PCI Device's bus pointer instead.
One less global to worry about.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move barsize, ahci_fingerprint and capabilities registers into
the AHCIQState object, removing global ahci-related state
from the ahci-test.c file.
More churn, less globals.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Store the HBA memory base address in the new state object, to simplify
function prototypes and encourage a more functional testing style.
This causes a lot of churn, but this patch is as "simplified" as I could
get it to be. This patch is therefore fairly mechanical and straightforward:
Any case where we pass "hba_base" has been consolidated into the AHCIQState
object and we pass the one unified parameter.
Any case where we reference "ahci" and "hba_state" have been modified to use
"ahci->dev" for the PCIDevice and "ahci->hba_state" to get at the base memory
address, accordingly.
Notes:
- A needless return is removed from start_ahci_device.
- For ease of reviewing, this patch can be reproduced (mostly) by:
# Replace (ahci, hba_base) prototypes with unified parameter
's/(QPCIDevice \*ahci, void \*\?\*hba_base/(AHCIQState *ahci/'
# Replace (ahci->dev, hba_base) calls with unified parameter
's/(ahci->dev, &\?hba_base)/(ahci)/'
# Replace calls to PCI config space using "ahci" with "ahci->dev"
's/qpci_config_\(read\|write\)\(.\)(ahci,/qpci_config_\1\2(ahci->dev,/'
After these, the remaining differences are easy to review by hand.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Create an operations structure so that the libqos interface can be
architecture agnostic, and create a pc-specific interface to functions
like qtest_boot.
Move the libqos object in the Makefile from being ahci-test only to
being linked with all tests that utilize the libqos features.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To avoid the architecture-specific implementations of the generic qtest
allocator having to know about fields within the allocator, add a
page_size setter method for users or arch specializations to use.
The allocator will assume a default page_size for general use, but it
can always be overridden.
Since this was the last instance of code directly using properties of the
QGuestAllocator object directly, modify the type to be opaque and move
the structure inside of malloc.c.
mlist_new, which was previously exported, is made static local to malloc.c,
as it has no external users.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
warning:
tests/libqos/malloc.c:35:3: warning:
redefinition of typedef 'QGuestAllocator' is a C11 feature
[-Wtypedef-redefinition]
} QGuestAllocator;
I converted typedef struct ... QGuestAllocator; to struct ...;
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Marc Marí <marc.mari.barcelo@gmail.com>
Message-id: 1421698563-6977-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow a generic interface to alloc_init_flags,
not just through pc_alloc_init_flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a va_list variant of the qtest_boot function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
