in many cases, <zlib.h> is only included for crc32 function,
and in some of them, there's a comment saying that, but in
a different way. In one place (hw/net/rtl8139.c), there was
another #include added between the comment and <zlib.h> include.
Make all such comments to be on the same line as #include, make
it consistent, and also add a few missing comments, including
hw/nvram/mac_nvram.c which uses adler32 instead.
There's no code changes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.
Now ELF notes of LoongArch only supports general elf notes, LSX and
LASX is not supported, since it is mainly used to dump guest memory.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240822065245.2286214-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
KVM provides interface KVM_REG_LOONGARCH_VCPU_RESET to reset vCPU,
it can be used to clear internal state about kvm kernel. vCPU reset
function is added here for kvm mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240822022827.2273534-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
With edk2-stable202408 LoongArch UEFI bios, CSR PGD register is set only
if its value is equal to zero for boot cpu, it causes reboot issue. Since
CSR PGD register is changed with linux kernel, UEFI BIOS cannot use it.
Add workaround to clear CSR registers relative with TLB in function
loongarch_cpu_reset_hold(), so that VM can reboot with edk2-stable202408
UEFI bios.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240827035807.3326293-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
When the lddir level is 4 and the base is a HugePage, we may try to put value 4
into a field in the TLBENTRY that is only 2 bits wide.
Fixes: Coverity CID 1547717
Fixes: 9c70db9a43 ("target/loongarch: Fix tlb huge page loading issue")
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240724015853.1317396-1-gaosong@loongson.cn>
GDB already support LoongArch vector extension[1], QEMU gdb adds
LoongArch vector registers support, so that users can use 'info all-registers'
to get all vector registers values.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1e9569f383a3d5a88ee07d0c2401bd95613c222e
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewd-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240711024454.3075183-1-gaosong@loongson.cn>
We set the value of register CSR_PRCFG3, but left out CSR_PRCFG1
and CSR_PRCFG2. Set CSR_PRCFG1 and CSR_PRCFG2 according to the
default values of the physical machine.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240705021839.1004374-1-gaosong@loongson.cn>
Since srai.w is a valid instruction on la32, remove the avail_64 check
and simplify trans_srai_w().
Fixes: c0c0461e3a ("target/loongarch: Add avail_64 to check la64-only instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Feiyang Chen <chris.chenfeiyang@gmail.com>
Message-Id: <20240628033357.50027-1-chris.chenfeiyang@gmail.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
With KVM virtualization, debug exception is injected to guest kernel
rather than host for normal break intruction. Here hypercall
instruction with special code is used for sw breakpoint usage,
and detailed instruction comes from kvm kernel with user API
KVM_REG_LOONGARCH_DEBUG_INST.
Now only software breakpoint is supported, and it is allowed to
insert/remove software breakpoint. We can debug guest kernel with gdb
method after kernel is loaded, hardware breakpoint will be added in later.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240607035016.2975799-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Currently the TCGCPUOps::cpu_exec_halt method is optional, and if it
is not set then the default is to call the CPUClass::has_work
method (which has an identical function signature).
We would like to make the cpu_exec_halt method mandatory so we can
remove the runtime check and fallback handling. In preparation for
that, make all the targets which don't need special handling in their
cpu_exec_halt set it to their cpu_has_work implementation instead of
leaving it unset. (This is every target except for arm and i386.)
In the riscv case this requires us to make the function not
be local to the source file it's defined in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
description:
loongarch_cpu_dump_state() want to dump all loongarch cpu
state registers, but there is a tiny typographical error when
printing "PRCFG2".
Cc: qemu-stable@nongnu.org
Signed-off-by: lanyanzhi <lanyanzhi22b@ict.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240604073831.666690-1-lanyanzhi22b@ict.ac.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Currently LSX/LASX vector property is decided by the default value.
Instead vector property should be added unconditionally, and it is
irrelative with its default value. If vector is disabled by default,
vector also can be enabled from command line.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240521080549.434197-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
On kvm side, get_fpu/set_fpu save the vreg registers high 192bits,
but QEMU missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240514110752.989572-1-gaosong@loongson.cn>
vmstate does not save kvm_state_conter,
which can cause VM recovery from disk to fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Song Gao <gaosong@loongson.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240508024732.3127792-1-gaosong@loongson.cn>
Almost all of the disas_log implementations are identical.
Unify them within translator_loop.
Drop extra Priv/Virt logging from target/riscv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On Loongarch, cpucfg is register for cpu feature, some other registers
depend on cpucfg feature such as perf CSR registers. Here put cpucfg
read/write operations before CSR register, so that KVM knows how many
perf CSR registers are valid from pre-set cpucfg feature information.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240428031651.1354587-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In structure CPUArchState some struct elements are only used in TCG
mode, and it is not used in KVM mode. Macro CONFIG_TCG is added to
make it simpiler in KVM mode, also there is the same modification
in c code when these structure elements are used.
When VM runs in KVM mode, TLB entries are not used and do not need
migrate. It is only useful when it runs in TCG mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240506011912.2108842-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
Fixes: 1590154ee4 ("target/loongarch: Fix qemu-system-loongarch64 assert failed with the option '-d int'")
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add init_cmline and set boot_info->a0, a1
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-5-gaosong@loongson.cn>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Board reset requires writing a fresh CPU state. As far as KVM is
concerned, the only thing that blocks reset is that CPU state is
encrypted; therefore, kvm_cpus_are_resettable() can simply check
if that is the case.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-system-loongarch64 assert failed with the option '-d int',
the helper_idle() raise an exception EXCP_HLT, but the exception name is undefined.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240321123606.1704900-1-gaosong@loongson.cn>
On gen_ll, if a->imm is zero, make_address_x return src1,
but the load to destination may clobber src1. We use a new
destination to fix this problem.
Fixes: c5af6628f4 (target/loongarch: Extract make_address_i() helper)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240320013955.1561311-1-gaosong@loongson.cn>
When we use qemu tcg simulation, the page size of bios is 4KB.
When using the level 2 super huge page (page size is 1G) to create the page table,
it is found that the content of the corresponding address space is abnormal,
resulting in the bios can not start the operating system and graphical interface normally.
The lddir and ldpte instruction emulation has
a problem with the use of super huge page processing above level 2.
The page size is not correctly calculated,
resulting in the wrong page size of the table entry found by tlb.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240318070332.1273939-1-lixianglai@loongson.cn>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
query-cpu-model-expansion takes a CpuModelInfo argument. The
loongarch version of the command silently ignores the argument's
member @props. For instance,
{"execute": "query-cpu-model-expansion", "arguments": {"type": "static", "model": {"name": "la464", "props": null}}}
and
{"execute": "query-cpu-model-expansion", "arguments": {"type": "static", "model": {"name": "la464", "props": {"prop": null}}}}
succeed.
Add skeleton code for property processing that recognizes no
properties. Now the two commands fail as they should:
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'model.props', expected: object"}}
and
{"error": {"class": "GenericError", "desc": "Parameter 'model.props.prop' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-5-armbru@redhat.com>
[Drop #include now superfluous]
Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Adjusted patch for hunk that moved to cpu_helper.c]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since CPU() macro is a simple cast, the following are equivalent:
Object *obj;
CPUState *cs = CPU(obj)
In order to ease static analysis when running
scripts/coccinelle/cpu_env.cocci from the previous commit,
replace:
- CPU_GET_CLASS(cpu);
+ CPU_GET_CLASS(obj);
Most code use the 'cs' variable name for CPUState handle.
Replace few 's' -> 'cs' to unify cpu_reset_hold() style.
No logical change in this patch.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid CPUArchState local variable when cpu_env() is used once.
Mechanical patch using the following Coccinelle spatch script:
@@
type CPUArchState;
identifier env;
expression cs;
@@
{
- CPUArchState *env = cpu_env(cs);
... when != env
- env
+ cpu_env(cs)
... when != env
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This makes the output suitable when used for plugins.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-29-alex.bennee@linaro.org>
GDBFeature has the num_regs member so use it where applicable to
remove magic numbers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-8-777047380591@daynix.com>
[AJB: remove core reg check from microblaze read reg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-13-alex.bennee@linaro.org>
Align the parameters of gdb_get_reg_cb and gdb_set_reg_cb with the
gdb_read_register and gdb_write_register members of CPUClass to allow
to unify the logic to access registers of the core and coprocessors
in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-6-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-11-alex.bennee@linaro.org>
This is a tree-wide change to introduce GDBFeature parameter to
gdb_register_coprocessor(). The new parameter just replaces num_regs
and xml parameters for now. GDBFeature will be utilized to simplify XML
lookup in a following change.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-4-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-9-alex.bennee@linaro.org>
For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The expected form is MMU_FOO_IDX, not MMU_IDX_FOO.
Rename to match generic code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cc->sysemu_ops->get_phys_page_debug() is NULL when
KVM-only build. this patch fixes it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240125061401.52526-1-gaosong@loongson.cn>
QEMU coding style recommends using structure typedefs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes gen_intermediate_code() signature target agnostic so the function
can be called from accel/tcg/translate-all.c without target specifics.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel had already support LSX and LASX [1],
but QEMU is disable LSX/LASX for kvm. This patch adds
kvm_check_cpucfg2() to check CPUCFG2.
[1]: https://lore.kernel.org/all/CABgObfZHRf7E_7Jk4uPRmSyxTy3EiuuYwHC35jQncNL9s-zTDA@mail.gmail.com/
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240122090206.1083584-1-gaosong@loongson.cn>
