linux/arch/arm/boot/dts/at91-cosino_mega2560.dts
Rodolfo Giometti 470e891b06 ARM: at91: add support for Cosino board series by HCE Engineering
This patch adds the Cosino at91sam9g35 based CPU module and the
Cosino Mega 2560 extension board.

Web site: http://www.cosino.it

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
[plagnioj@jcrosoft.com: added "at91-" to files, pinctrl fixed, removed unneeded stuff]
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: adapted to newer kernel, modified commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-09 11:10:11 +01:00

85 lines
1.5 KiB
Plaintext

/*
* at91-cosino_mega2560.dts - Device Tree file for Cosino board with
* Mega 2560 extension
*
* Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
* HCE Engineering
*
* Derived from at91sam9g35ek.dts by:
* Copyright (C) 2012 Atmel,
* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
#include "at91-cosino.dtsi"
/ {
model = "HCE Cosino Mega 2560";
compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
ahb {
apb {
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
};
adc0: adc@f804c000 {
atmel,adc-clock-rate = <1000000>;
atmel,adc-ts-wires = <4>;
atmel,adc-ts-pressure-threshold = <10000>;
status = "okay";
};
tsadcc: tsadcc@f804c000 {
status = "okay";
};
rtc@fffffeb0 {
status = "okay";
};
usart1: serial@f8020000 {
status = "okay";
};
usart2: serial@f8024000 {
status = "okay";
};
usb2: gadget@f803c000 {
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
status = "okay";
};
mmc1: mmc@f000c000 {
pinctrl-0 = <
&pinctrl_mmc1_slot0_clk_cmd_dat0
&pinctrl_mmc1_slot0_dat1_3>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
non-removable;
};
};
};
usb0: ohci@00600000 {
status = "okay";
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
&pioD 19 GPIO_ACTIVE_LOW
&pioD 20 GPIO_ACTIVE_LOW
>;
};
usb1: ehci@00700000 {
status = "okay";
};
};
};