ARM: at91: add support for Cosino board series by HCE Engineering

This patch adds the Cosino at91sam9g35 based CPU module and the
Cosino Mega 2560 extension board.

Web site: http://www.cosino.it

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
[plagnioj@jcrosoft.com: added "at91-" to files, pinctrl fixed, removed unneeded stuff]
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: adapted to newer kernel, modified commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/Makefile

@@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
 # sam9x5
 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb

arch/arm/boot/dts/at91-cosino.dtsi

@@ -0,0 +1,122 @@
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-clock-rate = <1000000>;
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;	/* Enable PMECC */
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "u-boot";
+				reg = <0x40000 0x80000>;
+			};
+
+			ubootenv@c0000 {
+				label = "U-Boot Env";
+				reg = <0xc0000 0x140000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/at91-cosino_mega2560.dts

@@ -0,0 +1,84 @@
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-clock-rate = <1000000>;
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+
+			tsadcc: tsadcc@f804c000 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+
+			usart1: serial@f8020000 {
+				status = "okay";
+			};
+
+			usart2: serial@f8024000 {
+				status = "okay";
+			};
+
+			usb2: gadget@f803c000 {
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc1: mmc@f000c000 {
+				pinctrl-0 = <
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					non-removable;
+				};
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+					   &pioD 19 GPIO_ACTIVE_LOW
+					   &pioD 20 GPIO_ACTIVE_LOW
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+};