linux/drivers/acpi/acpica/evxfevnt.c
Rafael J. Wysocki a210080195 ACPI / ACPICA: Defer enabling of runtime GPEs (v3)
The current ACPI GPEs initialization code has a problem that it
enables some GPEs pointed to by device _PRW methods, generally
intended for signaling wakeup events (system or device wakeup).
These GPEs are then almost immediately disabled by the ACPI namespace
scanning code with the help of acpi_gpe_can_wake(), but it would be
better not to enable them at all until really necessary.

Modify the initialization of GPEs so that the ones that have
associated _Lxx or _Exx methods and are not pointed to by any _PRW
methods will be enabled after the namespace scan is complete.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-24 16:55:47 -04:00

954 lines
26 KiB
C

/******************************************************************************
*
* Module Name: evxfevnt - External Interfaces, ACPI event disable/enable
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "actables.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxfevnt")
/* Local prototypes */
static acpi_status
acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block, void *context);
/*******************************************************************************
*
* FUNCTION: acpi_enable
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Transfers the system into ACPI mode.
*
******************************************************************************/
acpi_status acpi_enable(void)
{
acpi_status status;
int retry;
ACPI_FUNCTION_TRACE(acpi_enable);
/* ACPI tables must be present */
if (!acpi_tb_tables_loaded()) {
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
/* Check current mode */
if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"System is already in ACPI mode\n"));
return_ACPI_STATUS(AE_OK);
}
/* Transition to ACPI mode */
status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Could not transition to ACPI mode"));
return_ACPI_STATUS(status);
}
/* Sanity check that transition succeeded */
for (retry = 0; retry < 30000; ++retry) {
if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
if (retry != 0)
ACPI_WARNING((AE_INFO,
"Platform took > %d00 usec to enter ACPI mode", retry));
return_ACPI_STATUS(AE_OK);
}
acpi_os_stall(100); /* 100 usec */
}
ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode"));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
ACPI_EXPORT_SYMBOL(acpi_enable)
/*******************************************************************************
*
* FUNCTION: acpi_disable
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode.
*
******************************************************************************/
acpi_status acpi_disable(void)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(acpi_disable);
if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) {
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"System is already in legacy (non-ACPI) mode\n"));
} else {
/* Transition to LEGACY mode */
status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Could not exit ACPI mode to legacy mode"));
return_ACPI_STATUS(status);
}
ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI mode disabled\n"));
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable)
/*******************************************************************************
*
* FUNCTION: acpi_enable_event
*
* PARAMETERS: Event - The fixed eventto be enabled
* Flags - Reserved
*
* RETURN: Status
*
* DESCRIPTION: Enable an ACPI event (fixed)
*
******************************************************************************/
acpi_status acpi_enable_event(u32 event, u32 flags)
{
acpi_status status = AE_OK;
u32 value;
ACPI_FUNCTION_TRACE(acpi_enable_event);
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/*
* Enable the requested fixed event (by writing a one to the enable
* register bit)
*/
status =
acpi_write_bit_register(acpi_gbl_fixed_event_info[event].
enable_register_id, ACPI_ENABLE_EVENT);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Make sure that the hardware responded */
status =
acpi_read_bit_register(acpi_gbl_fixed_event_info[event].
enable_register_id, &value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (value != 1) {
ACPI_ERROR((AE_INFO,
"Could not enable %s event",
acpi_ut_get_event_name(event)));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_event)
/*******************************************************************************
*
* FUNCTION: acpi_gpe_wakeup
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* Action - Enable or Disable
*
* RETURN: Status
*
* DESCRIPTION: Set or clear the GPE's wakeup enable mask bit.
*
******************************************************************************/
acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_gpe_register_info *gpe_register_info;
acpi_cpu_flags flags;
u32 register_bit;
ACPI_FUNCTION_TRACE(acpi_gpe_wakeup);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info || !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
register_bit =
acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info);
/* Perform the action */
switch (action) {
case ACPI_GPE_ENABLE:
ACPI_SET_BIT(gpe_register_info->enable_for_wake,
(u8)register_bit);
break;
case ACPI_GPE_DISABLE:
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
(u8)register_bit);
break;
default:
ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
status = AE_BAD_PARAMETER;
break;
}
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup)
/*******************************************************************************
*
* FUNCTION: acpi_enable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
* hardware-enabled.
*
******************************************************************************/
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_enable_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
status = acpi_raw_enable_gpe(gpe_event_info);
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_disable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Remove a reference to a GPE. When the last reference is
* removed, only then is the GPE disabled (for runtime GPEs), or
* the GPE mask bit disabled (for wake GPEs)
*
******************************************************************************/
acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_disable_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
status = acpi_raw_disable_gpe(gpe_event_info) ;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_gpe_can_wake
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE. If the GPE
* has a corresponding method and is currently enabled, disable it
* (GPEs with corresponding methods are enabled unconditionally
* during initialization, but GPEs that can wake up are expected
* to be initially disabled).
*
******************************************************************************/
acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_gpe_can_wake);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
} else {
status = AE_BAD_PARAMETER;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake)
/*******************************************************************************
*
* FUNCTION: acpi_disable_event
*
* PARAMETERS: Event - The fixed eventto be enabled
* Flags - Reserved
*
* RETURN: Status
*
* DESCRIPTION: Disable an ACPI event (fixed)
*
******************************************************************************/
acpi_status acpi_disable_event(u32 event, u32 flags)
{
acpi_status status = AE_OK;
u32 value;
ACPI_FUNCTION_TRACE(acpi_disable_event);
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/*
* Disable the requested fixed event (by writing a zero to the enable
* register bit)
*/
status =
acpi_write_bit_register(acpi_gbl_fixed_event_info[event].
enable_register_id, ACPI_DISABLE_EVENT);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status =
acpi_read_bit_register(acpi_gbl_fixed_event_info[event].
enable_register_id, &value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (value != 0) {
ACPI_ERROR((AE_INFO,
"Could not disable %s events",
acpi_ut_get_event_name(event)));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable_event)
/*******************************************************************************
*
* FUNCTION: acpi_clear_event
*
* PARAMETERS: Event - The fixed event to be cleared
*
* RETURN: Status
*
* DESCRIPTION: Clear an ACPI event (fixed)
*
******************************************************************************/
acpi_status acpi_clear_event(u32 event)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(acpi_clear_event);
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/*
* Clear the requested fixed event (By writing a one to the status
* register bit)
*/
status =
acpi_write_bit_register(acpi_gbl_fixed_event_info[event].
status_register_id, ACPI_CLEAR_STATUS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_clear_event)
/*******************************************************************************
*
* FUNCTION: acpi_clear_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Clear an ACPI event (general purpose)
*
******************************************************************************/
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_clear_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
status = acpi_hw_clear_gpe(gpe_event_info);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_get_event_status
*
* PARAMETERS: Event - The fixed event
* event_status - Where the current status of the event will
* be returned
*
* RETURN: Status
*
* DESCRIPTION: Obtains and returns the current status of the event
*
******************************************************************************/
acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status)
{
acpi_status status = AE_OK;
u32 value;
ACPI_FUNCTION_TRACE(acpi_get_event_status);
if (!event_status) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Get the status of the requested fixed event */
status =
acpi_read_bit_register(acpi_gbl_fixed_event_info[event].
enable_register_id, &value);
if (ACPI_FAILURE(status))
return_ACPI_STATUS(status);
*event_status = value;
status =
acpi_read_bit_register(acpi_gbl_fixed_event_info[event].
status_register_id, &value);
if (ACPI_FAILURE(status))
return_ACPI_STATUS(status);
if (value)
*event_status |= ACPI_EVENT_FLAG_SET;
if (acpi_gbl_fixed_event_handlers[event].handler)
*event_status |= ACPI_EVENT_FLAG_HANDLE;
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_event_status)
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_status
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* event_status - Where the current status of the event will
* be returned
*
* RETURN: Status
*
* DESCRIPTION: Get status of an event (general purpose)
*
******************************************************************************/
acpi_status
acpi_get_gpe_status(acpi_handle gpe_device,
u32 gpe_number, acpi_event_status *event_status)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_get_gpe_status);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Obtain status on the requested GPE number */
status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
*event_status |= ACPI_EVENT_FLAG_HANDLE;
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
/*******************************************************************************
*
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
* gpe_block_address - Address and space_iD
* register_count - Number of GPE register pairs in the block
* interrupt_number - H/W interrupt for the block
*
* RETURN: Status
*
* DESCRIPTION: Create and Install a block of GPE registers
*
******************************************************************************/
acpi_status
acpi_install_gpe_block(acpi_handle gpe_device,
struct acpi_generic_address *gpe_block_address,
u32 register_count, u32 interrupt_number)
{
acpi_status status = AE_OK;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
struct acpi_gpe_block_info *gpe_block;
ACPI_FUNCTION_TRACE(acpi_install_gpe_block);
if ((!gpe_device) || (!gpe_block_address) || (!register_count)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return (status);
}
node = acpi_ns_validate_handle(gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/*
* For user-installed GPE Block Devices, the gpe_block_base_number
* is always zero
*/
status =
acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0,
interrupt_number, &gpe_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Install block in the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
/*
* No object, create a new one (Device nodes do not always have
* an attached object)
*/
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
status =
acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE);
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
}
/* Now install the GPE block in the device_object */
obj_desc->device.gpe_block = gpe_block;
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_gpe_block)
/*******************************************************************************
*
* FUNCTION: acpi_remove_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
*
* RETURN: Status
*
* DESCRIPTION: Remove a previously installed block of GPE registers
*
******************************************************************************/
acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
{
union acpi_operand_object *obj_desc;
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_remove_gpe_block);
if (!gpe_device) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return (status);
}
node = acpi_ns_validate_handle(gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Get the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc || !obj_desc->device.gpe_block) {
return_ACPI_STATUS(AE_NULL_OBJECT);
}
/* Delete the GPE block (but not the device_object) */
status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block);
if (ACPI_SUCCESS(status)) {
obj_desc->device.gpe_block = NULL;
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_device
*
* PARAMETERS: Index - System GPE index (0-current_gpe_count)
* gpe_device - Where the parent GPE Device is returned
*
* RETURN: Status
*
* DESCRIPTION: Obtain the GPE device associated with the input index. A NULL
* gpe device indicates that the gpe number is contained in one of
* the FADT-defined gpe blocks. Otherwise, the GPE block device.
*
******************************************************************************/
acpi_status
acpi_get_gpe_device(u32 index, acpi_handle *gpe_device)
{
struct acpi_gpe_device_info info;
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_get_gpe_device);
if (!gpe_device) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (index >= acpi_current_gpe_count) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
/* Setup and walk the GPE list */
info.index = index;
info.status = AE_NOT_EXIST;
info.gpe_device = NULL;
info.next_block_base_index = 0;
status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*gpe_device = info.gpe_device;
return_ACPI_STATUS(info.status);
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
/*******************************************************************************
*
* FUNCTION: acpi_ev_get_gpe_device
*
* PARAMETERS: GPE_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Matches the input GPE index (0-current_gpe_count) with a GPE
* block device. NULL if the GPE is one of the FADT-defined GPEs.
*
******************************************************************************/
static acpi_status
acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block, void *context)
{
struct acpi_gpe_device_info *info = context;
/* Increment Index by the number of GPEs in this block */
info->next_block_base_index += gpe_block->gpe_count;
if (info->index < info->next_block_base_index) {
/*
* The GPE index is within this block, get the node. Leave the node
* NULL for the FADT-defined GPEs
*/
if ((gpe_block->node)->type == ACPI_TYPE_DEVICE) {
info->gpe_device = gpe_block->node;
}
info->status = AE_OK;
return (AE_CTRL_END);
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_disable_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
*
******************************************************************************/
acpi_status acpi_disable_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_disable_all_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_disable_all_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_enable_all_runtime_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_enable_all_runtime_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_enable_all_runtime_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_update_gpes
*
* PARAMETERS: None
*
* RETURN: None
*
* DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and
* are not pointed to by any device _PRW methods indicating that
* these GPEs are generally intended for system or device wakeup
* (such GPEs have to be enabled directly when the devices whose
* _PRW methods point to them are set up for wakeup signaling).
*
******************************************************************************/
acpi_status acpi_update_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_update_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
} else if (acpi_all_gpes_initialized) {
goto unlock;
}
status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL);
if (ACPI_SUCCESS(status)) {
acpi_all_gpes_initialized = TRUE;
}
unlock:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}