linux/drivers/net/ethernet/broadcom
Simon Arlott aebd99477f bcm63xx_enet: check 1000BASE-T advertisement configuration
If a gigabit ethernet PHY is connected to a fast ethernet MAC,
then it can detect 1000 support from the partner but not use it.

This results in a forced speed of 1000 and RX/TX failure.

Check for 1000BASE-T support and then check the advertisement
configuration before setting the MAC speed to 1000mbit.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21 06:36:38 -07:00
..
bnx2x bnx2x: Prevent UDP 4-tuple configurations on older adapters 2015-10-11 05:09:30 -07:00
genet net: bcmgenet: Fix early link interrupt enabling 2015-10-18 23:07:12 -07:00
b44.c b44: call netif_napi_del() 2015-06-07 19:45:34 -07:00
b44.h b44: Utilize BRCM_PSEUDO_PHY_ADDR 2015-06-10 23:33:58 -07:00
bcm63xx_enet.c bcm63xx_enet: check 1000BASE-T advertisement configuration 2015-10-21 06:36:38 -07:00
bcm63xx_enet.h bcm63xx_enet: add support Broadcom BCM6345 Ethernet 2013-06-13 17:22:08 -07:00
bcmsysport.c net: systemport: Fix module autoload for OF platform driver 2015-09-21 16:08:21 -07:00
bcmsysport.h net: systemport: Pre-calculate and utilize cb->bd_addr 2015-05-30 23:51:09 -07:00
bgmac.c bgmac: Update fixed_phy_register() 2015-09-02 11:39:58 -07:00
bgmac.h bgmac: Utilize BRCM_PSEUDO_PHY_ADDR 2015-06-10 23:33:58 -07:00
bnx2.c bnx2: disable toggling of rxvlan if necessary 2015-03-01 23:25:51 -05:00
bnx2.h bnx2-cnic: Driver Rebranding Changes 2015-02-20 15:46:49 -05:00
bnx2_fw.h bnx2-cnic: Driver Rebranding Changes 2015-02-20 15:46:49 -05:00
cnic.c cnic: Add the interfaces to get FC-NPIV table. 2015-08-06 21:54:12 -07:00
cnic.h cnic: Rebranding cnic driver. 2014-06-25 16:27:27 -07:00
cnic_defs.h cnic: Rebranding cnic driver. 2014-06-25 16:27:27 -07:00
cnic_if.h cnic: Add the interfaces to get FC-NPIV table. 2015-08-06 21:54:12 -07:00
Kconfig bnx2x: Add vxlan RSS support 2015-08-18 14:21:10 -07:00
Makefile net: systemport: hook SYSTEMPORT driver in the build 2014-04-26 12:57:40 -04:00
sb1250-mac.c MIPS: SB1: Remove support for Pass 1 parts. 2015-07-14 21:47:34 +02:00
tg3.c tg3: Fix temperature reporting 2015-09-01 15:03:59 -07:00
tg3.h tg3: prevent ifup/ifdown during PCI error recovery 2014-09-02 13:02:19 -07:00