The definition for btrfs_get_extent() is using "u64 end" as the last
parameter, but in implementation we go "u64 len", and all call sites
follows the implementation.
This can be very confusing during development, as most developers
including me, would just use the snippet returned by LSP (clangd in my
case), which would only check the definition.
Unfortunately this mismatch is introduced from the very beginning of
btrfs.
Fix it to prevent further confusion.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, in struct extent_map, we use an unsigned int (32 bits) to
identify the compression type of an extent and an unsigned long (64 bits
on a 64 bits platform, 32 bits otherwise) for flags. We are only using
6 different flags, so an unsigned long is excessive and we can use flags
to identify the compression type instead of using a dedicated 32 bits
field.
We can easily have tens or hundreds of thousands (or more) of extent maps
on busy and large filesystems, specially with compression enabled or many
or large files with tons of small extents. So it's convenient to have the
extent_map structure as small as possible in order to use less memory.
So remove the compression type field from struct extent_map, use flags
to identify the compression type and shorten the flags field from an
unsigned long to a u32. This saves 8 bytes (on 64 bits platforms) and
reduces the size of the structure from 136 bytes down to 128 bytes, using
now only two cache lines, and increases the number of extent maps we can
have per 4K page from 30 to 32. By using a u32 for the flags instead of
an unsigned long, we no longer use test_bit(), set_bit() and clear_bit(),
but that level of atomicity is not needed as most flags are never cleared
once set (before adding an extent map to the tree), and the ones that can
be cleared or set after an extent map is added to the tree, are always
performed while holding the write lock on the extent map tree, while the
reader holds a lock on the tree or tests for a flag that never changes
once the extent map is in the tree (such as compression flags).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At mergable_maps() instead of having a single if statement with many
ORed and ANDed conditions, refactor it with multiple if statements that
check a single condition and return immediately once a requirement fails.
This makes it easier to read.
Also change the return type from int to bool, make the arguments const
and rename the function from mergable_maps() to mergeable_maps().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent map pointer argument for extent_map_end() can be const as we
are not modifyng anything in the extent map. So make it const, as it will
allow further changes to callers that have a const extent map pointer.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When trying to merge an extent map that was just inserted or unpinned, we
will try to merge it with any adjacent extent map that is suitable.
However we will only check if our extent map is mergeable after searching
for the previous and next extent maps in the rbtree, meaning that we are
doing unnecessary calls to rb_prev() and rb_next() in case our extent map
is not mergeable (it's compressed, in the list of modifed extents, being
logged or pinned), wasting CPU time chasing rbtree pointers and pulling
in unnecessary cache lines.
So change the logic to check first if an extent map is mergeable before
searching for the next and previous extent maps in the rbtree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At unpin_extent_range() we trigger a WARN_ON() when we don't find an
extent map or we find one with a start offset not matching the start
offset of the target range. This however isn't very useful for debugging
because:
1) We don't know which condition was triggered, as they are both in the
same WARN_ON() call;
2) We don't know which inode was affected, from which root, for which
range, what's the start offset of the extent map, and so on.
So trigger a separate warning for each case and log a message for each
case providing information about the inode, its root, the target range,
the generation and the start offset of the extent map we found.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_add_extent_mapping(), in case add_extent_mapping() returned
-EEXIST, it's pointless to assign 0 to 'ret' since we will assign a value
to it shortly after, without 'ret' being used before that. So remove that
pointless assignment.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to export add_extent_mapping(), as it's only used inside
extent_map.c and in the self tests. For the tests we can use instead
btrfs_add_extent_mapping(), which will accomplish exactly the same as we
don't expect collisions in any of them. So unexport it and make the tests
use btrfs_add_extent_mapping() instead of add_extent_mapping().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some error messages of the extent map tests print decimal values of start
offsets and lengths, while other are oddly printing in hexadecimal, which
is far less human friendly, specially taking into consideration that all
the values are small and multiples of 4K, so it's a lot easier to read
them as decimal values. Change the format specifiers to print as decimal
instead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several of the extent map tests call btrfs_add_extent_mapping() which is
supposed to succeed and return an extent map through the pointer to
pointer argument. However the tests are deliberately ignoring a NULL
extent map, which is not expected to happen. So change the tests to error
out if a NULL extent map is found.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In test case 4 for extent maps, if we error out we are supposed to print
in interval but instead of printing a non-inclusive end offset, we are
printing the length of the interval, which makes it confusing. So fix
that to print the exclusive end offset instead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When setting up a new extent map, at setup_extent_mapping(), we're doing
a list move operation to add the extent map the tree's list of modified
extents. This is confusing because at this point the extent map can not
be in any list, because it's a new extent map. So replace the list move
with a list add and add an assertion that checks that the extent map is
not currently in any list.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file_extent_tree was added in 41a2ee75aa ("btrfs: introduce
per-inode file extent tree") so we have an explicit mapping of the file
extents to know where it is safe to update i_size. When the feature
NO_HOLES is enabled, and it's been a mkfs default since 5.15, the tree
is not necessary.
To save some space in the inode, allocate the tree only when necessary.
This reduces size by 16 bytes from 1096 to 1080 on a x86_64 release
config.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When profiling a workload I noticed we were constantly calling getxattr.
These were mostly coming from __remove_privs, which will lookup if
security.capability exists to remove it. However instrumenting getxattr
showed we get called nearly constantly on an idle machine on a lot of
accesses.
These are wasteful and not free. Other security LSMs have a way to
cache their results, but capability doesn't have this, so it's asking us
all the time for the xattr.
Fix this by setting a flag in our inode that it doesn't have a
security.capability xattr. We set this on new inodes and after a failed
lookup of security.capability. If we set this xattr at all we'll clear
the flag.
I haven't found a test in fsperf that this makes a visible difference
on, but I assume fs_mark related tests would show it clearly. This is a
perf report output of the smallfiles100k run where it shows 20% of our
time spent in __remove_privs because we're looking up the non-existent
xattr.
--21.86%--btrfs_write_check.constprop.0
--21.62%--__file_remove_privs
--21.55%--security_inode_need_killpriv
--21.54%--cap_inode_need_killpriv
--21.53%--__vfs_getxattr
--20.89%--btrfs_getxattr
Obviously this is just CPU time in a mostly IO bound test, so the actual
effect of removing this callchain is minimal. However in just normal
testing of an idle system tracing showed around 100 getxattr calls per
minute, and with this patch there are 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've deprecated these a while ago in 5.11, go ahead and remove the code
for them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're currently setting this when we try to load the roots and we see
that usebackuproot is set. Instead set this at mount option parsing
time.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no reason this has to happen in open_ctree, and in fact in the
old mount API we had to call this from remount. Move this to super.c,
unexport it, and call it from both mount and reconfigure.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've switched to the new mount API, remove the old stuff.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We add these mount options based on the fs_devices settings, which can
be set once we've opened the fs_devices. Move these into their own
helper and call it from get_tree_super.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have all of the parts in place to use the new mount API,
switch our fs_type to use the new callbacks.
There are a few things that have to be done at the same time because of
the order of operations changes that come along with the new mount API.
These must be done in the same patch otherwise things will go wrong.
1. Export and use btrfs_check_options in open_ctree(). This is because
the options are done ahead of time, and we need to check them once we
have the feature flags loaded.
2. Update the free space cache settings. Since we're coming in with the
options already set we need to make sure we don't undo what the user
has asked for.
3. Set our sb_flags at init_fs_context time, the fs_context stuff is
trying to manage the sb_flagss itself, so move that into
init_fs_context and out of the fill super part.
Additionally I've marked the unused functions with __maybe_unused and
will remove them in a future patch.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a special case that we've carried around since 0723a0473f ("btrfs:
allow mounting btrfs subvolumes with different ro/rw options") where
we'll under the covers flip the file system to RW if you're mixing and
matching ro/rw options with different subvol mounts. The first mount is
what the super gets setup as, so we'd handle this by remount the super
as rw under the covers to facilitate this behavior.
With the new mount API we can't really allow this, because user space
has the ability to specify the super block settings, and the mount
settings. So if the user explicitly sets the super block as read only,
and then tried to mount a rw mount with the super block we'll reject
this. However the old API was less descriptive and thus we allowed this
kind of behavior.
This patch preserves this behavior for the old API calls. This is
inspired by Christians work [1], and includes his comment in
btrfs_get_tree_super() explaining the history and how it all works in
the old and new APIs.
Link: https://lore.kernel.org/all/20230626-fs-btrfs-mount-api-v1-2-045e9735a00b@kernel.org/
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the actual mounting callback for the new mount API. Implement
this using our current fill super as a guideline, making the appropriate
adjustments for the new mount API.
Our old mount operation had two fs_types, one to handle the actual
opening, and the one that we called to handle the actual opening and
then did the subvol lookup for returning the actual root dentry. This
is mirrored here, but simply with different behaviors for ->get_tree.
We use the existence of ->s_fs_info to tell which part we're in. The
initial call allocates the fs_info, then call mount_fc() with a
duplicated fc to do the actual open_ctree part. Then we take that
vfsmount and use it to look up our subvolume that we're mounting and
return that as our s_root. This idea was taken from Christians attempt
to convert us to the new mount API [1].
In btrfs_get_tree_super() the mount device is scanned and opened in one
go under uuid_mutex we expect that all related devices have been already
scanned, either by mount or from the outside. A device forget can be
called on some of the devices as the whole context is not protected but
it's an unlikely event, though it's a minor behaviour change.
References: https://lore.kernel.org/all/20230626-fs-btrfs-mount-api-v1-2-045e9735a00b@kernel.org/
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note about device scanning ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is what is used to remount the file system with the new mount API.
Because the mount options are parsed separately and one at a time I've
added a helper to emit the mount options after the fact once the mount
is configured, this matches the dmesg output for what happens with the
old mount API.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to use the fs context to hold the mount options, so
allocate the btrfs_fs_context when we're asked to init the fs context,
and free it in the free callback.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parse_param callback handles one parameter at a time, take our
existing mount option parsing loop and adjust it to handle one parameter
at a time, and tie it into the fs_context_operations.
Create a btrfs_fs_context object that will store the various mount
properties, we'll house this in fc->fs_private. This is necessary to
separate because remounting will use ->reconfigure, and we'll get a new
copy of the parsed parameters, so we can no longer directly mess with
the fs_info in this stage.
In the future we'll add this to the btrfs_fs_info and update the users
to use the new context object instead.
There's a change how the option device= is processed. Previously all
mount options were parsed in one go under uuid_mutex and the devices
opened. This prevented a concurrent scan to happen during mount. Now we
could see a device scan happen (e.g. by udev) but this should not affect
the end result, mount will either see the populated fs_devices or will
scan the device by itself.
Alternatively we could save all the device paths first and then process
them in one go as before but this does not seem to be necessary.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note about device scanning ]
Signed-off-by: David Sterba <dsterba@suse.com>
In order to convert to the new mount API we have to change how we do the
mount option parsing. For now we're going to duplicate these helpers to
make it easier to follow, and then remove the old code once everything
is in place. This patch contains the re-definition of all of our mount
options into the new fs_parameter_spec format.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the old mount API we'd pre-populate the mount options with the
space cache settings of the file system, and then the user toggled them
on or off with the mount options. When we switch to the new mount API
the mount options will be set before we get into opening the file
system, so we need a flag to indicate that the user explicitly asked for
-o nospace_cache so we can make the appropriate changes after the fact.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we remount ro->rw or rw->ro we have some cleanup tasks that have to
be managed. Split these out into their own function to make
btrfs_remount smaller.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently don't allow these options to be set if we're extent tree v2
via the mount option parsing. However when we switch to the new mount
API we'll no longer have the super block loaded, so won't be able to
make this distinction at mount option parsing time. Address this by
checking for extent tree v2 at the point where we make the decision to
rebuild the free space tree.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we pre-load the space cache settings in btrfs_parse_options,
however when we switch to the new mount API the mount option parsing
will happen before we have the super block loaded. Add a helper to set
the appropriate options based on the fs settings, this will allow us to
have consistent free space cache settings.
This also folds in the space cache related decisions we make for subpage
sectorsize support, so all of this is done in one place.
Since this was being called by parse options it looks like we're
changing the behavior of remount, but in fact we aren't. The
pre-loading of the free space cache settings is done because we want to
handle the case of users not using any space_cache options, we'll derive
the appropriate mount option based on the on disk state. On remount
this wouldn't reset anything as we'll have cleared the v1 cache
generation if we mounted -o nospace_cache. Similarly it's impossible to
turn off the free space tree without specifically saying -o
nospace_cache,clear_cache, which will delete the free space tree and
clear the compat_ro option. Again in this case calling this code in
remount wouldn't result in any change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the new mount API we'll be setting our compression well before we
call open_ctree. We don't want to overwrite our settings, so set the
default in btrfs_init_fs_info instead of open_ctree.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to need to validate mount options after they're all parsed
with the new mount API, split this code out into its own helper so we
can use it when we swap over to the new mount API.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor adjustments in the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
We already communicate to filesystems when a remount request comes from
the old mount API as some filesystems choose to implement different
behavior in the new mount API than the old mount API to e.g., take the
chance to fix significant API bugs. Allow the same for regular mount
requests.
Fixes: b330966f79 ("fuse: reject options on reconfigure via fsconfig(2)")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit ac3c0d36a2 ("btrfs: make fiemap more efficient and accurate
reporting extent sharedness") we no longer need to create special extent
maps during fiemap that have a block start with the EXTENT_MAP_DELALLOC
value. So this block start value for extent maps is no longer used since
then, therefore remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs extent buffer helpers are doing all the cross-page
handling, as there is no guarantee that all those eb pages are
contiguous.
However on systems with enough memory, there is a very high chance the
page cache for btree_inode are allocated with physically contiguous
pages.
In that case, we can skip all the complex cross-page handling, thus
speeding up the code.
This patch adds a new member, extent_buffer::addr, which is only set to
non-NULL if all the extent buffer pages are physically contiguous.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reflow btrfs_free_tree_block() so that there is one level of indentation
needed.
This patch has no functional changes.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use memset_page() in memset_extent_buffer() instead of opencoding it.
This does not not change any functionality.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not clearing the dirty flag off of extent_buffers in zoned mode,
all that is left of btrfs_redirty_list_add() is a memzero() and some
ASSERT()ions.
As we're also memzero()ing the buffer on write-out btrfs_redirty_list_add()
has become obsolete and can be removed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One a zoned filesystem, never clear the dirty flag of an extent buffer,
but instead mark it as zeroout.
On writeout, when encountering a marked extent_buffer, zero it out.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
EXTENT_BUFFER_ZONED_ZEROOUT better describes the state of the extent buffer,
namely it is written as all zeros. This is needed in zoned mode, to
preserve I/O ordering.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_io_tree is embedded in several structures, notably in struct
btrfs_inode. The fs_info is only used for reporting errors and for
reference in trace points. We can get to the pointer through the inode,
but not all io trees set it. However, we always know the owner and
can recognize if inode is valid. For access helpers are provided, const
variant for the trace points.
This reduces size of extent_io_tree by 8 bytes and following structures
in turn:
- btrfs_inode 1104 -> 1088
- btrfs_device 520 -> 512
- btrfs_root 1360 -> 1344
- btrfs_transaction 456 -> 440
- btrfs_fs_info 3600 -> 3592
- reloc_control 1520 -> 1512
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the type of the extent io tree operation which failed in the report
helper. The message wording and contents is updated, though locking
might be the cause of the error it's probably not the only one and we're
interested in the state.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The printk helpers take const fs_info if it's used just for the
identifier in the messages, __btrfs_panic() lacks that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper insert_state errors are handled in all callers and reported
by extent_io_tree_panic so we don't need to do it twice.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The per-inode file extent tree was added in 41a2ee75aa ("btrfs:
introduce per-inode file extent tree"), it's the only tree type
that requires the lockdep class. Move it to the file where it is
actually used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not needed to have a local variable to store the stripe size at
insert_dev_extents(), we can just take from the chunk map as it's only
used once and typing 'map->stripe_size' is not much more verbose than
simply typing 'stripe_size'. So remove the local variable.
This was added before the recent addition of a dedicated structure for
chunk mappings because the stripe size was encoded in the 'orig_block_len'
field of an extent_map structure, so the use of the local variable made
things more readable.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we abuse the extent_map structure for two purposes:
1) To actually represent extents for inodes;
2) To represent chunk mappings.
This is odd and has several disadvantages:
1) To create a chunk map, we need to do two memory allocations: one for
an extent_map structure and another one for a map_lookup structure, so
more potential for an allocation failure and more complicated code to
manage and link two structures;
2) For a chunk map we actually only use 3 fields (24 bytes) of the
respective extent map structure: the 'start' field to have the logical
start address of the chunk, the 'len' field to have the chunk's size,
and the 'orig_block_len' field to contain the chunk's stripe size.
Besides wasting a memory, it's also odd and not intuitive at all to
have the stripe size in a field named 'orig_block_len'.
We are also using 'block_len' of the extent_map structure to contain
the chunk size, so we have 2 fields for the same value, 'len' and
'block_len', which is pointless;
3) When an extent map is associated to a chunk mapping, we set the bit
EXTENT_FLAG_FS_MAPPING on its flags and then make its member named
'map_lookup' point to the associated map_lookup structure. This means
that for an extent map associated to an inode extent, we are not using
this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform);
4) Extent maps associated to a chunk mapping are never merged or split so
it's pointless to use the existing extent map infrastructure.
So add a dedicated data structure named 'btrfs_chunk_map' to represent
chunk mappings, this is basically the existing map_lookup structure with
some extra fields:
1) 'start' to contain the chunk logical address;
2) 'chunk_len' to contain the chunk's length;
3) 'stripe_size' for the stripe size;
4) 'rb_node' for insertion into a rb tree;
5) 'refs' for reference counting.
This way we do a single memory allocation for chunk mappings and we don't
waste memory for them with unused/unnecessary fields from an extent_map.
We also save 8 bytes from the extent_map structure by removing the
'map_lookup' pointer, so the size of struct extent_map is reduced from
144 bytes down to 136 bytes, and we can now have 30 extents map per 4K
page instead of 28.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no reason to open code what btrfs_next_item() does when searching
for extent items at scrub.c:scrub.c:find_first_extent_item(), so remove
the logic to find the next item and use btrfs_next_item() instead, making
the code shorter and less nested code blocks. While at it also fix the
comment to the plural "items" instead of "item" and end it with proper
punctuation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper extent_map_block_end() is currently not used anywhere outside
extent_map.c, so move into from extent_map.h into extent_map.c. While at
it, also make the extent map pointer argument as const.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
