- Enable i.MX7D and LS1021A SoC support
- Enable support for WL1271 WIFI/BT, SX8654 I2C touchscreen and PCF8523
RTC, which can be found on Armadeus Systems APF6 and Cubox-i boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVbArDAAoJEFBXWFqHsHzOaMoIAJrdhMHWKpTys4OmQOao0qE1
uHCrGHlAcWGy8xgoA617D3PLahP9QMID9GUFxH8cWRa4ifBEybn9nqyQFU/Sp6CM
cwRNXvscupvnPQcZIbpQlJezaBH2pqm43BOWi5b77/ASdh+xad7JFGniOb6P5L2Q
iplE12VVDkg70t3tOh7lHgrRs5I/1DL3/JSCTh7KEEjxr0wBkR68/b3ONP3eqnhP
txa+mW1fh61l3VZ8qzff8T1yvyft/onoqbzfN9BVITlKDrWe3NSM/jalM9h1o5T3
orlj3rLacJhdSpWUtCK+M8BovdaI549wNk7HnDH1lNzawUJ3m8b7Y1uuAfkAhGI=
=DIH7
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "The i.MX defconfig updates for 4.2" from Shawn Guo:
- Enable i.MX7D and LS1021A SoC support
- Enable support for WL1271 WIFI/BT, SX8654 I2C touchscreen and PCF8523
RTC, which can be found on Armadeus Systems APF6 and Cubox-i boards.
* tag 'imx-defconfig-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards
ARM: config: imx_v6_v7_defconfig add imx7d support
ARM: imx_v6_v7_defconfig: Select LS1021A
ARM: imx_v6_v7_defconfig: Enable RTC PCF8523 support
Remove the generic 8250 config option so that the LPC18xx
specific option gets picked instead.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family,
Exynos5250, Exynos5440 and Exynos542x/5800 family.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
allows detection of overheat and handling this gracefully.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, fuel gauge (max17042),
used on: Trats2,
- s5m/s2mps: RTC, clock,
used on: Arndale, Arndale Octa, Gear 1, Gear 2
This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and
Exynos5250. Enable it in default configuration to reduce energy
consumption.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cypress All Points Addressable (APA) I2C Trackpad is used in the
Samsung Exynos 5250 Snow Chromebook. Build the driver as a module so
the device is supported.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The I2C GPIO arbitration driver is used on the Exynos5250 Snow Chromebook
to arbitrate the access to a I2C bus by the Application Processor or a EC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many Exynos devices have devices attached to their display ports.
This patch enables the needed Kconfig options to support different
configuration such as simple panel, embedded DisplayPort (eDP) to
LVDS bridges and HDMI displays.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rtc-s3c driver supports a range of S3C series Real-Time-Clocks found
on many Samsung SoCs. Build the driver as a module to support these RTC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the Generic PWM Samsung driver as a module to support PWM
devices used in platforms with a Samsung SoC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the needed Kconfig options to have support for the ChromeOS EC
I2C transport, I2C tunnel and chardev user-space interface.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the needed kconfig options to have support for Samsung USB 2.0
and USB 3.0 PHY drivers to support the USB PHYs found on Exynos SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Maxim max77802 Power Management IC is used on many Exynos machines.
Besides a bunch of regulators, this chip has a Real-Time-Clock (RTC)
and 2-channel 32kHz clock outputs.
Enable the kernel config options to have the drivers for these devices
built as a module.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: removing useless REGULATOR_MAX77802 config]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the spi-s3c64xx driver as a module to have support for
the SPI controller in several Samsung SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Select ARM_SINGLE_ARMV7M in defconfigs of the converted ARMv7-M
platforms.
[arnd: moved the efm32_defconfig change to the patch that
originally introduces the symbol, to avoid intermittent regression]
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add defconfig for Linux on Vybrid (vf610) on the secondary Cortex-
M4 CPU. The use of a XIP image has been tested which needs to be
loaded (e.g. using the custom m4boot loader) to the end of the
available RAM at address 0x8f000000. The Cortex-M4 has a code-alias
which makes sure that the instructions get fetched through the code
bus (alias starts at 0x00800000 => 0x80800000 in system address).
Hence, to get optimal performance, use 0x0f000000 as XIP_PHYS_ADDR.
This address is additionally shifted by the length of the minimal
loader which is inserted by m4boot. Currently, this offset is 0x80.
The standard DRAM base address is configured to 0x8C000000, which
gives the Cortex-M4 48MiB of RAM.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJVWz/rAAoJEAf03oE53VmQ13wH/1G0Ynxs9CKPvw6QRpt+wRkS
yD03sSjihCKF6AD+8nBtwfOpf2PikzSunAyARLAcbQT4I0K9gqOkqIV8JhNM9CD+
DSIMds60wAWxvem9CWVQzDv+NdYjNA/bke3zYhlLsKrelIJiaAxOnc3SfPWTBaTO
tRS1Gsshb+x+KrXNS2lJh3YBRb2PuaPDsM8gE0o9ztRnymGaHYdHiy/SuXDInNZQ
iZY2Q16fjX43SV/2hBlPfKjRzaC7t1+7WSWN12IR+lBq2PvIFEpu2Kh9cdjZmC9m
x5o2lryrQU9VKK5LgajZrPra9NGfnwFqYdCddIo7PvY0kFLWj+YHyIImOD4vSvo=
=qvSQ
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig
Merge "First batch of defconfig changes for 4.2" from Nicolas Ferre:
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig
* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: multi_v7_defconfig: Add Atmel SAMA5 family
ARM: at91/defconfig: add CONFIG_REGULATOR_FIXED_VOLTAGE for mmc driver
Conflicts:
arch/arm/configs/multi_v7_defconfig
The original stm32 defconfig file looks for a ./rootfs.cpio file,
but that breaks with
../scripts/gen_initramfs_list.sh: Cannot open './rootfs.cpio'
when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
The original zx defconfig file looks for a ./rootfs.cpio file,
but that breaks with
scripts/gen_initramfs_list.sh: Cannot open 'initramfs.cpio.gz'
when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jun Nie <jun.nie@linaro.org>
Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig.
Note that the console will be ttyAT0 instead of the usual ttyS0.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
As an update of the sd/mmc DT definition needs the fixed voltage regulator, add
it to the at91 defconfigs.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs
CONFIG_BT_HCIUART_LL.
APF6Dev carrier board has a SX8654 I2C touchscreen controller.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds a new config for STM32 MCUs.
STM32F429 Discovery board boots successfully with this config applied.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add basic defconfig support to zx SOC, including uart, mmc
and other common config
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a set of changes to the Tegra default configuration that enable
various new features (HDMI audio, watchdog) on Toradex Apalis T30.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wg5M
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Merge "ARM: tegra: Default configuration updates for v4.2-rc1" from Thierry Reding:
This is a set of changes to the Tegra default configuration that enable
various new features (HDMI audio, watchdog) on Toradex Apalis T30.
* tag 'tegra-for-4.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update default configuration
This enables the CoreSight blocks found on the Ux500 SoC
into the Ux500 defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Ux500 has a perfectly working PMU so let's put the perf
events into the defconfig. This will activate HW_PERF_EVENTS
by default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable all drivers under CONFIG_ARM_CRYPTO as modules. Enable
CONFIG_KERNEL_MODE_NEON as well so that the modules that either
contain a NEON alternative or consist solely of a NEON (or ARMv8
crypto extensions) accelerated implementation are enabled fully as
well.
Note that the ARMv8 modules will only be built if the detected
toolchain version is recent enough (binutils 2.23 or higher).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only
PHY_RCAR_GEN2 driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add UniPhier, a new citizen in the ARM multi platform.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the digicolor drivers that are already merged as
part of the multi_v7_defconfig file.
[arnd: change rtc and i2c to loadable modules]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull drm fixes from Dave Airlie:
"I really need to get back to sending these on my Friday, instead of my
Monday morning, but nothing too amazing in here: a few amdkfd fixes, a
few radeon fixes, i915 fixes, one tegra fix and one core fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
drm/tegra: Don't use vblank_disable_immediate on incapable driver.
drm/radeon: stop trying to suspend UVD sessions
drm/radeon: more strictly validate the UVD codec
drm/radeon: make UVD handle checking more strict
drm/radeon: make VCE handle check more strict
drm/radeon: fix userptr lockup
drm/radeon: fix userptr BO unpin bug v3
drm/amdkfd: Initialize sdma vm when creating sdma queue
drm/amdkfd: Don't report local memory size
drm/amdkfd: allow unregister process with queues
drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
drm/i915: Sink rate read should be saved in deca-kHz
drm/i915/dp: there is no audio on port A
drm/i915: Add missing MacBook Pro models with dual channel LVDS
drm/i915: Assume dual channel LVDS if pixel clock necessitates it
drm/radeon: don't setup audio on asics that don't support it
drm/radeon: disable semaphores for UVD V1 (v2)
misc i915 fixes.
* tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
drm/i915: Sink rate read should be saved in deca-kHz
drm/i915/dp: there is no audio on port A
drm/i915: Add missing MacBook Pro models with dual channel LVDS
drm/i915: Assume dual channel LVDS if pixel clock necessitates it
Since commit 844b03f277 we make
sure that after vblank irq off, we return the last valid
(vblank count, vblank timestamp) pair to clients, e.g., during
modesets, which is good.
An overlooked side effect of that commit for kms drivers without
support for precise vblank timestamping is that at vblank irq
enable, when we update the vblank counter from the hw counter, we
can't update the corresponding vblank timestamp, so now we have a
totally mismatched timestamp for the new count to confuse clients.
Restore old client visible behaviour from before Linux 3.17, but
zero out the timestamp at vblank counter update (instead of disable
as in original implementation) if we can't generate a meaningful
timestamp immediately for the new vblank counter. This will fix
this regression, so callers know they need to retry again later
if they need a valid timestamp, but at the same time preserves
the improvements made in the commit mentioned above.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> #v3.17+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull ARM fixes from Russell King:
"A set of ARM fixes:
- fix an off-by-one error in the iommu DMA ops, which caused errors
with a 4GiB size.
- remove comments mentioning the non-existent CONFIG_CPU_ARM1020_CPU_IDLE
macro.
- remove useless CONFIG_CPU_ICACHE_STREAMING_DISABLE blocks, where
this symbol never appeared in any Kconfig.
- fix Feroceon code to cope with a previous change correctly (it
incorrectly left an additional word in an assembly structure
definition)
- avoid a misleading IRQ affinity warning in the ARM PMU code for
IRQs which are already affine to their CPUs.
- fix the node name printed in the IRQ affinity warning"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8352/1: perf: Fix the pmu node name in warning message
ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs
ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro
ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block
ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE
ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops
- fixes commit ea08de16eb ("ARM: dts: Add DISP1 power
domain for exynos5420") which causes 'unhandled fault:
imprecise external abort' error when PD turned off.
: make DP a consumer of DISP1 power domain
- fixes 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards.
: add 'rtc_src' clock to rtc node for source clock of rtc
- fixes typo for 'cpu-crit-0' trip point on exynos5420/5440
- fixes S2R failure on exynos5250-snow due to card power of
Marvell WiFi driver (suspend/resume)
: add keep-power-in-susped to WiFi SDIO node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=YBxq
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung
Pull samsung fixes from Kukjin Kim:
"Here is Samsung fixes for v4.1. Since I've missed to send this via
arm-soc tree before v4.1-rc3, so I'm sending this to you directly
- fix commit ea08de16eb ("ARM: dts: Add DISP1 power domain for
exynos5420") which causes 'unhandled fault: imprecise external
abort' error when PD turned off. ("make DP a consumer of DISP1
power domain")
- fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add
'rtc_src' clock to rtc node for source clock of rtc")
- fix typo for 'cpu-crit-0' trip point on exynos5420/5440
- fix S2R failure on exynos5250-snow due to card power of Marvell
WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi
SDIO node")"
* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow
ARM: dts: Fix typo in trip point temperature for exynos5420/5440
ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards
ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
