Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=AoVg
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZQsZLQAKCRCRxhvAZXjc
op0vAP96hkSUnmXmxTr8GHId3yfElN8ZZ3aSfePeBdljjKEZVAEA2+cbHLy4GqRi
TpjP1HNIdmtbVSC2ZnrgqkbwGageQgg=
=s92y
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull finegrained timestamp reverts from Christian Brauner:
"Earlier this week we sent a few minor fixes for the multi-grained
timestamp work in [1]. While we were polishing those up after Linus
realized that there might be a nicer way to fix them we received a
regression report in [2] that fine grained timestamps break gnulib
tests and thus possibly other tools.
The kernel will elide fine-grain timestamp updates when no one is
actively querying for them to avoid performance impacts. So a sequence
like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may
result in timestamp f1 to be older than the final f2 timestamp even
though f1 was last written too but the second write didn't update the
timestamp.
Such plotholes can lead to subtle bugs when programs compare
timestamps. For example, the nap() function in [2] will estimate that
it needs to wait one ns on a fine-grain timestamp enabled filesytem
between subsequent calls to observe a timestamp change. But in general
we don't update timestamps with more than one jiffie if we think that
no one is actively querying for fine-grain timestamps to avoid
performance impacts.
While discussing various fixes the decision was to go back to the
drawing board and ultimately to explore a solution that involves only
exposing such fine-grained timestamps to nfs internally and never to
userspace.
As there are multiple solutions discussed the honest thing to do here
is not to fix this up or disable it but to cleanly revert. The general
infrastructure will probably come back but there is no reason to keep
this code in mainline.
The general changes to timestamp handling are valid and a good cleanup
that will stay. The revert is fully bisectable"
Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1]
Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2]
* tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "fs: add infrastructure for multigrain timestamps"
Revert "btrfs: convert to multigrain timestamps"
Revert "ext4: switch to multigrain timestamps"
Revert "xfs: switch to multigrain timestamps"
Revert "tmpfs: add support for multigrain timestamps"
- A fix for breakpoint handling which was using get_user() while atomic.
- Fix the Power10 HASHCHK handler which was using get_user() while atomic.
- A few build fixes for issues caused by recent changes.
Thanks to: Benjamin Gray, Christophe Leroy, Kajol Jain, Naveen N Rao.
-----BEGIN PGP SIGNATURE-----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=piWL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for breakpoint handling which was using get_user() while atomic
- Fix the Power10 HASHCHK handler which was using get_user() while
atomic
- A few build fixes for issues caused by recent changes
Thanks to Benjamin Gray, Christophe Leroy, Kajol Jain, and Naveen N Rao.
* tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/dexcr: Move HASHCHK trap handler
powerpc/82xx: Select FSL_SOC
powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
powerpc/watchpoints: Annotate atomic context in more places
powerpc/watchpoint: Disable pagefaults when getting user instruction
powerpc/watchpoints: Disable preemption in thread_change_pc()
powerpc/perf/hv-24x7: Update domain value check
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZQv/2QAKCRCAXGG7T9hj
vlaAAQCsmQ0V9N9I4SW3G2JKGGIWW6+/IzsKF4RhNlSgm15MNgD9E0nHfEQpRGkL
6qKO7wc/C3PJRrcq8RxWS8jergeT+wY=
=vBS0
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- remove some unused functions in the Xen event channel handling
- fix a regression (introduced during the merge window) when booting as
Xen PV guest
- small cleanup removing another strncpy() instance
* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/efi: refactor deprecated strncpy
x86/xen: allow nesting of same lazy mode
x86/xen: move paravirt lazy code
arm/xen: remove lazy mode related definitions
xen: simplify evtchn_do_upcall() call maze
Fix several compilation errors and warnings in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmUL2P0QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kSniB/9crPnn5y/AvzqA/AiRAvK9pbYj8t3lZyRC
PFvqHqg6OOQA2AN7VHcxaty6nMYMnr6Myk8lxmY45tpW6wp16XcFtoGYZAllBwTm
GoqyhRnREDHp7Z0FtKFGcdXm4AYSzEFIlQymoLFJ5S/fGDiBxBd53pacqS0JrL6X
TKKG1wLPiW9Vq/G90dL6N8qgA4vel9/UoE0aKEWHSEiGhhgcEh+foBoOs0F8DR9y
o/GZFVJfW5Jek6D7kWzMMq37dPS4TVJWN8df2Q2Ljy5f64i9sT/3rm+/dV6bmarB
1gjQtI+YoTeu+bZ1I9zJBWwTsMjyjhyZEk1zZxys89+qOnwaCTHF
=bA+b
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test fixes from Mike Rapoport:
"Fix several compilation errors and warnings in memblock tests"
* tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
memblock tests: fix warning: "__ALIGN_KERNEL" redefined
memblock tests: Fix compilation errors.
A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks
-----BEGIN PGP SIGNATURE-----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=1MuW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
One patch to drop a non-existent alarm attribute in the nct6775 driver
-----BEGIN PGP SIGNATURE-----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=7x+T
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to drop a non-existent alarm attribute in the nct6775 driver"
* tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix non-existent ALARM warning
Don't populate read-only const arrays on the stack, instead make them
static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230919093606.24446-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arseniy Krasnov says:
====================
vsock/virtio/vhost: MSG_ZEROCOPY preparations
this patchset is first of three parts of another big patchset for
MSG_ZEROCOPY flag support:
https://lore.kernel.org/netdev/20230701063947.3422088-1-AVKrasnov@sberdevices.ru/
During review of this series, Stefano Garzarella <sgarzare@redhat.com>
suggested to split it for three parts to simplify review and merging:
1) virtio and vhost updates (for fragged skbs) <--- this patchset
2) AF_VSOCK updates (allows to enable MSG_ZEROCOPY mode and read
tx completions) and update for Documentation/.
3) Updates for tests and utils.
This series enables handling of fragged skbs in virtio and vhost parts.
Newly logic won't be triggered, because SO_ZEROCOPY options is still
impossible to enable at this moment (next bunch of patches from big
set above will enable it).
====================
Link: https://lore.kernel.org/r/20230916130918.4105122-1-avkrasnov@salutedevices.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds handling of MSG_ZEROCOPY flag on transmission path:
1) If this flag is set and zerocopy transmission is possible (enabled
in socket options and transport allows zerocopy), then non-linear
skb will be created and filled with the pages of user's buffer.
Pages of user's buffer are locked in memory by 'get_user_pages()'.
2) Replaces way of skb owning: instead of 'skb_set_owner_sk_safe()' it
calls 'skb_set_owner_w()'. Reason of this change is that
'__zerocopy_sg_from_iter()' increments 'sk_wmem_alloc' of socket, so
to decrease this field correctly, proper skb destructor is needed:
'sock_wfree()'. This destructor is set by 'skb_set_owner_w()'.
3) Adds new callback to 'struct virtio_transport': 'can_msgzerocopy'.
If this callback is set, then transport needs extra check to be able
to send provided number of buffers in zerocopy mode. Currently, the
only transport that needs this callback set is virtio, because this
transport adds new buffers to the virtio queue and we need to check,
that number of these buffers is less than size of the queue (it is
required by virtio spec). vhost and loopback transports don't need
this check.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For tap device new skb is created and data from the current skb is
copied to it. This adds copying data from non-linear skb to new
the skb.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For non-linear skb use its pages from fragment array as buffers in
virtio tx queue. These pages are already pinned by 'get_user_pages()'
during such skb creation.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dTwV
-----END PGP SIGNATURE-----
Merge tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
The following three patches fix regressions in the netfilter subsystem:
1. Reject attempts to repeatedly toggle the 'dormant' flag in a single
transaction. Doing so makes nf_tables lose track of the real state
vs. the desired state. This ends with an attempt to unregister hooks
that were never registered in the first place, which yields a splat.
2. Fix element counting in the new nftables garbage collection infra
that came with 6.5: More than 255 expired elements wraps a counter
which results in memory leak.
3. Since 6.4 ipset can BUG when a set is renamed while a CREATE command
is in progress, fix from Jozsef Kadlecsik.
* tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
====================
Link: https://lore.kernel.org/r/20230920084156.4192-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Several places in TC offload code assumed that the return from
rhashtable_lookup_get_insert_fast() was always either NULL or a valid
pointer to an existing entry, but in fact that function can return an
error pointer. In that case, perform the usual cleanup of the newly
created entry, then pass up the error, rather than attempting to take a
reference on the old entry.
Fixes: d902e1a737 ("sfc: bare bones TC offload on EF100")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230919183949.59392-1-edward.cree@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.
Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.
This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.
How to test:
User can get the coalesce value using ethtool command.
Example command:
Get: ethtool -c <interface>
Previous output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
New output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
Fixes: 8c5ad0dae9 ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sebastian Andrzej Siewior says:
====================
Add missing xdp_do_flush() invocations.
I've been looking at the drivers/ XDP users and noticed that some
XDP_REDIRECT user don't invoke xdp_do_flush() at the end.
====================
Link: https://lore.kernel.org/r/20230918153611.165722-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.
Invoke xdp_do_flush() before leaving NAPI.
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77b2 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).
Invoke xdp_do_flush() also in the error path.
Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70ad1 ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Tr0P
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- driver fixes due to incorrect fwnode_handle_put() call
- bt8xx: bttv_risc_packed(): remove field checks
- vb2: frame_vector.c: replace WARN_ONCE with a comment
- imx219: a couple typo fixes and perform a full mode set
unconditionally
- uvcvideo: Fix OOB read
- some dependency fixes
* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
media: vb2: frame_vector.c: replace WARN_ONCE with a comment
media: uvcvideo: Fix OOB read
media: bt8xx: bttv_risc_packed(): remove field checks
media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
media: i2c: imx219: Perform a full mode set unconditionally
media: i2c: imx219: Fix crop rectangle setting when changing format
media: i2c: imx219: Fix a typo referring to a wrong variable
media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
media: ivsc: Depend on VIDEO_DEV
media: via: Use correct dependency for camera sensor drivers
media: v4l: Use correct dependency for camera sensor drivers
media: pci: ivsc: Select build dependencies
-----BEGIN PGP SIGNATURE-----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=0eEg
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more followup fixes to the directory listing.
People have noticed different behaviour compared to other filesystems
after changes in 6.5. This is now unified to more "logical" and
expected behaviour while still within POSIX. And a few more fixes for
stable.
- change behaviour of readdir()/rewinddir() when new directory
entries are created after opendir(), properly tracking the last
entry
- fix race in readdir when multiple threads can set the last entry
index for a directory
Additionally:
- use exclusive lock when direct io might need to drop privs and call
notify_change()
- don't clear uptodate bit on page after an error, this may lead to a
deadlock in subpage mode
- fix waiting pattern when multiple readers block on Merkle tree
data, switch to folios"
* tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between reading a directory and adding entries to it
btrfs: refresh dir last index during a rewinddir(3) call
btrfs: set last dir index to the current last index when opening dir
btrfs: don't clear uptodate on write errors
btrfs: file_remove_privs needs an exclusive lock in direct io write
btrfs: convert btrfs_read_merkle_tree_page() to use a folio
A small collection of fixes, plus a new device ID for Intel Granite
Rapids systems. The fix for the i.MX driver is fairly urgent, it's
fixing a data corruption issue when bits per word isn't 8. There's also
one fix which was queued but not sent for v6.4 due to being minor and
arriving at the end of the release.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUK64oACgkQJNaLcl1U
h9AbJgf9F4aRSuHTYThemL6PRHpW2b0QCRFe4rbeho+H3JPmgQBPlrnriwbnL2kL
oTcPQJgrP7wPQxoN4MSJ4JRh8Rkj7v5I9KOxe+TeIsxGeYpDnyLUDnhOAP6f2FZZ
nlJ0fUKFRzobqAd2n9Wb15hF08rf/fFSI0KSjyN2EHCj02OLSu+IJQReXHvtbuZ3
TX3gW7FAgFqV/YzR3A2IBLteMhJPqQAY5U6x3DlIAVhgafww9nj4OyVjP5HftRSv
zArx+mRoeaqqsUd/oodyPpMSuaspMyathdWvPfpNkGiRJgCVZ2FB3pfZbyK7tTk2
hAxGPpfe8WRMD4JpifSJggm4HR46Ng==
=WxRo
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes, plus a new device ID for Intel Granite
Rapids systems.
The fix for the i.MX driver is fairly urgent, it's fixing a data
corruption issue when bits per word isn't 8.
There's also one fix which was queued but not sent for v6.4 due to
being minor and arriving at the end of the release"
* tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: Take in account bits per word instead of assuming 8-bits
spi: intel-pci: Add support for Granite Rapids SPI serial flash
spi: stm32: add a delay before SPI disable
spi: nxp-fspi: reset the FLSHxCR1 registers
spi: zynqmp-gqspi: fix clock imbalance on probe failure
One fix for the tps6287x driver which was incorrectly specifying the
field for voltage range selection leading to incorrect voltages being
set.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUK680ACgkQJNaLcl1U
h9APfwf9EmhIJcm1kfaT4mExcronA/gzPgZQ/8cHyrf4B1AFFBjddISeCq8rKtQR
vJ7hKzKlQ3UEGAn0gNTsd3k1MshKIAI3vjuqpOiMJfEZ48MUMkvS4A6j5fETvUr/
T2TA/uNqr2reaHnPSiJjnVm/dQT2e4gNZv/kClEpTfSsLIqjI3NNR8AJWToHzim+
vbWs3OKmKz/c+Wuppkb+8PIVj6t8IC57t8u+EDOwhKS1494w5XPo2BOXbldhTH4k
2KtisFLRLXr/n2SsR+s+CQ9ODGPajN6RLGMwIwcVes4u1kD4kIDwNRzd/ov8TrSY
iXbfkiVmVEm2b3qRiO3WIYwVzDQ1LA==
=UlNw
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for the tps6287x driver which was incorrectly specifying the
field for voltage range selection leading to incorrect voltages being
set"
* tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix voltage range selection
This reverts commit ffb6cf19e0.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 50e9ceef1d.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 0269b58586.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit e44df26647.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit d48c339729.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Quite a large collection of fixes, with numbers boosted by multiple
vendors sending multi-patch serieses. Nothing super major, and also one
device quirk.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUK6tUACgkQJNaLcl1U
h9CF5Af+IhyN4/WaqDOl6hgKJr206SDHkiW5SAq+cRMsTGWLzM32MXDYxHg21Lke
hD6weld3cjvN/yqPOxLGS6+Sf5S6BXIdSmTrjVKyrRag6qn+ArzzO2sQpOWdeYs3
SJAa36Ias/Mz8IPNOZpoQLdF8p7ncXYqUyqnx579pPMO5P2IeLSf0MbBdAxxrw8V
Q0OOulaLxwKaDx2ss0mL4KAnfbgYe8e9c0xYhyBCNElAU/m+FCWazslXF5tOWkjI
vZFmqJ1jBsCXLctWnCceER4A/nTK2m8WIJ6ep97cuD2dhVuzJxY3BmhN+aL2zgDQ
dvl5f8gv8PhYX2aM8gCXP5SE+Lczvg==
=MePv
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.6
Quite a large collection of fixes, with numbers boosted by multiple
vendors sending multi-patch serieses. Nothing super major, and also one
device quirk.
Alexei Starovoitov says:
====================
bpf-next 2023-09-19
The following pull-request contains BPF updates for your *net-next* tree.
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 4 files changed, 9 insertions(+), 13 deletions(-).
The main changes are:
1) A set of fixes for bpf exceptions, from Kumar and Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't populate the read-only array lanes on the stack, instead make
it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't populate the const read-only array lanes on the stack, instead make
it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
'hwdev' is checked too late and hwdev will not be NULL, so remove the check
Fixes: 2acf960e3b ("net: hinic: Add support for configuration of rx-vlan-filter by ethtool")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202309112354.pikZCmyk-lkp@intel.com/
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: better Tx SG handling
The primary patch here is to be sure we're not hitting linearize on a Tx
skb when we don't really need to. The other two are related details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When processing a TSO we may have frags spread across several
descriptors, and the total count of frags in one skb may exceed
our per descriptor IONIC_MAX_FRAGS: this is fine as long as
each descriptor has fewer frags than the limit. Since the skb
could have as many as MAX_SKB_FRAGS, and the first descriptor
is where we track and map the frag buffers, we need to be sure
we can map buffers for all of the frags plus the TSO header in
the first descriptor's buffer array.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a check of the queue's max_sg_elems against the maximum frags we
expect to see per SKB and take the smaller of the two as our max for
the queues' descriptor buffer allocations.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some cases where an skb carries more frags than the
number of SGs that ionic can support per descriptor - this
forces the driver to linearize the skb. However, if this
is a TSO packet that is going to become multiple descriptors
(one per MTU-sized packet) and spread the frags across them,
this time-consuming linearization is likely not necessary.
We scan the frag list and count up the number of SGs that
would be created for each descriptor that would be generated,
and only linearize if we hit the SG limit on a descriptor.
In most cases, we won't even get to the frag list scan, so
this doesn't affect typical traffic.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-09-18 (ice)
This series contains updates to ice driver only.
Sergey prepends ICE_ to PTP timer commands to clearly convey namespace
of commands.
Karol adds retrying to acquire hardware semaphore for cross-timestamping
and avoids writing to timestamp registers on E822 devices. He also
renames some defines to be more clear and align with the data sheet.
Additionally, a range check is moved in order to reduce duplicated code.
Jake adds cross-timestamping support for E823 devices as well as adds
checks against netlist to aid in determining support for GNSS. He also
corrects improper pin assignment for certain E810-T devices and
refactors/cleanups PTP related code such as adding PHY model to ease checks
for different needed implementations, removing unneeded EXTTS flag, and
adding macro to check for source timer owner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König says:
====================
net: mdio: Convert to platform remove callback returning void
this series convert all platform drivers below drivers/net/mdio to
use remove_new. The motivation is to get rid of an integer return code
that is (mostly) ignored by the platform driver core and error prone on
the driver side.
See commit 5c5a7680e6 ("platform: Provide a remove callback that
returns no value") for an extended explanation and the eventual goal.
There are no interdependencies between the patches. As there are still
quite a few drivers to convert, I'm happy about every patch that makes
it in. So even if there is a merge conflict with one patch until you
apply, please apply the remainder of this series anyhow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>