Update the maintainer of starfive dwmac driver.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible for syzbot to side-step the restriction imposed by the
blamed commit in the Fixes: tag, because the taprio UAPI permits a
cycle-time different from (and potentially shorter than) the sum of
entry intervals.
We need one more restriction, which is that the cycle time itself must
be larger than N * ETH_ZLEN bit times, where N is the number of schedule
entries. This restriction needs to apply regardless of whether the cycle
time came from the user or was the implicit, auto-calculated value, so
we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)"
branch. This way covers both conditions and scenarios.
Add a selftest which illustrates the issue triggered by syzbot.
Fixes: b5b73b26b3 ("taprio: Fix allowing too small intervals")
Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000007d66bc06196e7c66@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit b5b73b26b3 ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.
The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.
Add a selftest to make sure the issue doesn't get reintroduced.
Fixes: 09dbdf28f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240527153955.553333-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().
Fixes: e9b4ece7d7 ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one creates a socket, adds it to the map and closes it.
That will trigger the WARN_ON_ONCE:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Modules linked in:
CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02
RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293
RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000
RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0
RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3
R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840
R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870
FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0
Call Trace:
<TASK>
unix_release+0x87/0xc0 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0xbe/0x240 net/socket.c:1421
__fput+0x42b/0x8a0 fs/file_table.c:422
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close fs/open.c:1541 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1541
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb37d618070
Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c
RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070
RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Use sk_psock, which will only check that the pointer is not been set to
NULL yet, which should only happen after the callbacks are restored. If,
then, a reference can still be gotten, we may call sk_psock_stop and cancel
psock->work.
As suggested by Paolo Abeni, reorder the condition so the control flow is
less convoluted.
After that change, the reproducer does not trigger the WARN_ON_ONCE
anymore.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: syzbot+07a2e4a1a57118ef7355@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=07a2e4a1a57118ef7355
Fixes: aadb2bb83f ("sock_map: Fix a potential use-after-free in sock_map_close()")
Fixes: 5b4a79ba65 ("bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240524144702.1178377-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
selftests: mptcp: mark unstable subtests as flaky
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs where tests are more
unstable than on our side, some subtests have been marked as flaky. As a
result, errors with these subtests (if any) are ignored.
Note that the MPTCP CI will continue to track these flaky subtests. All
these unstable subtests are also tracked by our bug tracker.
These are fixes for the -net tree, because the instabilities are visible
there. The first patch introducing the flake support has no 'Fixes'
tags, mainly because it requires recent and important refactoring done
in all MPTCP selftests. Backporting that to old versions where the flaky
tests have been introduced would be too difficult, and probably not
worth it. The other patches, adding MPTCP_LIB_SUBTEST_FLAKY=1, have a
Fixes tag, simply to ease the backport of the future fixes removing them
along with the proper fix.
====================
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-0-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests are rarely unstable. It depends on the CI running the tests,
especially if it is also busy doing other tasks in parallel, and if a
debug kernel config is being used.
It looks like this issue is sometimes present with the NetDev CI. While
this is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel, and if a debug kernel config is
being used.
It looks like this issue is often present with the NetDev CI. While this
is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes: 01542c9bf9 ("selftests: mptcp: add fastclose testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-3-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel.
A first analysis shown that the transfer can be slowed down when there
are some re-injections at the MPTCP level. Such re-injections can of
course happen, and disturb the transfer, but it looks strange to have
them in this lab. That could be caused by the kernel having access to
less CPU cycles -- e.g. when other activities are executed in parallel
-- or by a misinterpretation on the MPTCP packet scheduler side.
While this is being investigated, the tests are marked as flaky not to
create noises in other CIs.
Fixes: 219d04992b ("mptcp: push pending frames when subflow has free space")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-2-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs, it is important to have a
simple way to mark subtests as flaky, and ignore the errors. This is
what this patch introduces: subtests can be marked as flaky by setting
MPTCP_LIB_SUBTEST_FLAKY env var to 1, e.g.
MPTCP_LIB_SUBTEST_FLAKY=1 <run flaky subtest>
The subtest will be executed, and errors (if any) will be ignored. It is
still good to run these subtests, as it exercises code, and the results
can still be useful for the on-going investigations.
Note that the MPTCP CI will continue to track these flaky subtests by
setting SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var to 1, and a ticket
has to be created before marking subtests as flaky.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-1-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2024-05-23 (ice, idpf)
This series contains two fixes which finished up testing.
First, Alexander fixes an issue in idpf caused by enabling NAPI and
interrupts prior to actually allocating the Rx buffers.
Second, Jacob fixes the ice driver VSI VLAN counting logic to ensure that
addition and deletion of VLANs properly manages the total VSI count.
====================
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-0-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the tagged commit, @netdev got documented twice and the kdoc
script didn't notice that. Remove the second description added later
and move the initial one according to the field position.
After merging commit 5f8e4007c1 ("kernel-doc: fix
struct_group_tagged() parsing"), kdoc requires to describe struct
groups as well. &page_pool_params has 2 struct groups which
generated new warnings, describe them to resolve this.
Fixes: 403f11ac9a ("page_pool: don't use driver-set flags field directly")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240524112859.2757403-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong. We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.
Fixes: a8f1a19d27 ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When fec_probe() fails or fec_drv_remove() needs to release the
fec queue and remove a NAPI context, therefore add a function
corresponding to fec_enet_init() and call fec_enet_deinit() which
does the opposite to release memory and remove a NAPI context.
Fixes: 59d0f74656 ("net: fec: init multi queue date structure")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240524050528.4115581-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints and all the undocumented properties exposed by the fix.
Fixes: f562202fed ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints, and fix the fallout of wrong manager node regex and
missing properties.
Fixes: 9c1de033af ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171732.2836880-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason commit made checks against ACK sequence less strict
and can be exploited by attackers to establish spoofed flows
with less probes.
Innocent users might use tcp_rmem[1] == 1,000,000,000,
or something more reasonable.
An attacker can use a regular TCP connection to learn the server
initial tp->rcv_wnd, and use it to optimize the attack.
If we make sure that only the announced window (smaller than 65535)
is used for ACK validation, we force an attacker to use
65537 packets to complete the 3WHS (assuming server ISN is unknown)
Fixes: 378979e94e ("tcp: remove 64 KByte limit for initial tp->rcv_wnd value")
Link: https://datatracker.ietf.org/meeting/119/materials/slides-119-tcpm-ghost-acks-00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240523130528.60376-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller was able to trigger
kernel BUG at net/core/gro.c:424 !
RIP: 0010:gro_pull_from_frag0 net/core/gro.c:424 [inline]
RIP: 0010:gro_try_pull_from_frag0 net/core/gro.c:446 [inline]
RIP: 0010:dev_gro_receive+0x242f/0x24b0 net/core/gro.c:571
Due to using an incorrect NAPI_GRO_CB(skb)->network_offset.
The referenced commit sets this offset to 0 in skb_gro_reset_offset.
That matches the expected case in dev_gro_receive:
pp = INDIRECT_CALL_INET(ptype->callbacks.gro_receive,
ipv6_gro_receive, inet_gro_receive,
&gro_list->list, skb);
But syzkaller injected an skb with protocol ETH_P_TEB into an ip6gre
device (by writing the IP6GRE encapsulated version to a TAP device).
The result was a first call to eth_gro_receive, and thus an extra
ETH_HLEN in network_offset that should not be there. First issue hit
is when computing offset from network header in ipv6_gro_pull_exthdrs.
Initialize both offsets in the network layer gro_receive.
This pairs with all reads in gro_receive, which use
skb_gro_receive_network_offset().
Fixes: 186b1ea73a ("net: gro: use cb instead of skb->network_header")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240523141434.1752483-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit started returning an error when user space requests to dump
the interface's IPv4 addresses and IPv4 is disabled on the interface.
Restore the previous behavior and do not return an error.
Before cited commit:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
inet6 fe80::e040:68ff:fe98:d018/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
After cited commit:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 32:2d:69:f2:9c:99 brd ff:ff:ff:ff:ff:ff
inet6 fe80::302d:69ff:fef2:9c99/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
RTNETLINK answers: No such device
Dump terminated
With this patch:
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
inet6 fe80::dc17:56ff:febb:57c0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 67
# ip address show dev dummy1
10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
I fixed the exact same issue for IPv6 in commit c04f7dfe6e ("ipv6: Fix
address dump when IPv6 is disabled on an interface"), but noted [1] that
I am not doing the change for IPv4 because I am not aware of a way to
disable IPv4 on an interface other than unregistering it. I clearly
missed the above case.
[1] https://lore.kernel.org/netdev/20240321173042.2151756-1-idosch@nvidia.com/
Fixes: cdb2f80f1c ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Carolina Jubran <cjubran@nvidia.com>
Reported-by: Yamen Safadi <ysafadi@nvidia.com>
Tested-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240523110257.334315-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZlTGFAAKCRDbK58LschI
g5NXAP0QRn8nBSxJHIswFSOwRiCyhOhR7YL2P0c+RGcRMA+ZSAD9E1cwsYXsPu3L
ummQ52AMaMfouHg6aW+rFIoupkGSnwc=
=QctA
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Verifier enforces that only certain program types can mutate sock{map,hash}
maps, that is update it or delete from it. Add test coverage for these
checks so we don't regress.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com
This reverts commit ff91059932.
This check is no longer needed. BPF programs attached to tracepoints are
now rejected by the verifier when they attempt to delete from a
sockmap/sockhash maps.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-2-944b372f2101@cloudflare.com
We have seen an influx of syzkaller reports where a BPF program attached to
a tracepoint triggers a locking rule violation by performing a map_delete
on a sockmap/sockhash.
We don't intend to support this artificial use scenario. Extend the
existing verifier allowed-program-type check for updating sockmap/sockhash
to also cover deleting from a map.
From now on only BPF programs which were previously allowed to update
sockmap/sockhash can delete from these map types.
Fixes: ff91059932 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=ec941d6e24f633a59172
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-1-944b372f2101@cloudflare.com
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes: f293501c61 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are two type of classes. "Leaf classes" that are the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.
Root
/ \
/ \
1 2
/\
/ \
4 5
classes 1,4 and 5 are leaf classes.
class 2 is a inner class.
When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.
Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzkaller reported data-race of sk->sk_hash in unix_autobind() [0],
and the same ones exist in unix_bind_bsd() and unix_bind_abstract().
The three bind() functions prefetch sk->sk_hash locklessly and
use it later after validating that unix_sk(sk)->addr is NULL under
unix_sk(sk)->bindlock.
The prefetched sk->sk_hash is the hash value of unbound socket set
in unix_create1() and does not change until bind() completes.
There could be a chance that sk->sk_hash changes after the lockless
read. However, in such a case, non-NULL unix_sk(sk)->addr is visible
under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using
the prefetched value.
The KCSAN splat is false-positive, but let's silence it by reading
sk->sk_hash under unix_sk(sk)->bindlock.
[0]:
BUG: KCSAN: data-race in unix_autobind / unix_autobind
write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:331 [inline]
unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1:
unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x000000e4 -> 0x000001e3
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: afd20b9290 ("af_unix: Replace the big lock with small locks.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once unix_sk(sk)->addr is assigned under net->unx.table.locks and
unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are
fully set up, and unix_sk(sk)->addr is never changed.
unix_getname() and unix_copy_addr() access the two fields locklessly,
and commit ae3b564179 ("missing barriers in some of unix_sock ->addr
and ->path accesses") added smp_store_release() and smp_load_acquire()
pairs.
In other functions, we still read unix_sk(sk)->addr locklessly to check
if the socket is bound, and KCSAN complains about it. [0]
Given these functions have no dependency for *(unix_sk(sk)->addr) and
unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race.
Note that it is safe to access unix_sk(sk)->addr locklessly if the socket
is found in the hash table. For example, the lockless read of otheru->addr
in unix_stream_connect() is safe.
Note also that newu->addr there is of the child socket that is still not
accessible from userspace, and smp_store_release() publishes the address
in case the socket is accept()ed and unix_getname() / unix_copy_addr()
is called.
[0]:
BUG: KCSAN: data-race in unix_bind / unix_listen
write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:329 [inline]
unix_bind_bsd net/unix/af_unix.c:1241 [inline]
unix_bind+0x881/0x1000 net/unix/af_unix.c:1319
__sys_bind+0x194/0x1e0 net/socket.c:1847
__do_sys_bind net/socket.c:1858 [inline]
__se_sys_bind net/socket.c:1856 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1856
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1:
unix_listen+0x72/0x180 net/unix/af_unix.c:734
__sys_listen+0xdc/0x160 net/socket.c:1881
__do_sys_listen net/socket.c:1890 [inline]
__se_sys_listen net/socket.c:1888 [inline]
__x64_sys_listen+0x2e/0x40 net/socket.c:1888
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x0000000000000000 -> 0xffff88807b5b1b40
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154002.77857-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The hsr_ping test reports the following errors:
INFO: preparing interfaces for HSRv0.
INFO: Initial validation ping.
INFO: Longer ping test.
INFO: Cutting one link.
INFO: Delay the link and drop a few packages.
INFO: All good.
INFO: preparing interfaces for HSRv1.
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
INFO: Initial validation ping.
That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f67
("test: hsr: Remove script code already implemented in lib.sh").
This patch fixes it by re-setup the namespaces using
setup_ns ns1 ns2 ns3
command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.
Fixes: 680fda4f67 ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.
Fixes: f8bd909183 ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When running Cilium connectivity test suite with netkit in L2 mode, we
found that compared to tcx a few tests were failing which pushed traffic
into an L7 proxy sitting in host namespace. The problem in particular is
around the invocation of eth_type_trans() in netkit.
In case of tcx, this is run before the tcx ingress is triggered inside
host namespace and thus if the BPF program uses the bpf_skb_change_type()
helper the newly set type is retained. However, in case of netkit, the
late eth_type_trans() invocation overrides the earlier decision from the
BPF program which eventually leads to the test failure.
Instead of eth_type_trans(), split out the relevant parts, meaning, reset
of mac header and call to eth_skb_pkt_type() before the BPF program is run
in order to have the same behavior as with tcx, and refactor a small helper
called eth_skb_pull_mac() which is run in case it's passed up the stack
where the mac header must be pulled. With this all connectivity tests pass.
Fixes: 35dfaad718 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240524163619.26001-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running Cilium connectivity test suite with netkit in L2 mode, we
found that it is expected to be able to specify a custom MAC address for
the devices, in particular, cilium-cni obtains the specified MAC address
by querying the endpoint and sets the MAC address of the interface inside
the Pod. Thus, fix the missing support in netkit for L2 mode.
Fixes: 35dfaad718 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20240524163619.26001-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
Fix BPF multi-uprobe PID filtering logic
It turns out that current implementation of multi-uprobe PID filtering logic
is broken. It filters by thread, while the promise is filtering by process.
Patch #1 fixes the logic trivially. The rest is testing and mitigations that
are necessary for libbpf to not break users of USDT programs.
v1->v2:
- fix selftest in last patch (CI);
- use semicolon in patch #3 (Jiri).
====================
Link: https://lore.kernel.org/r/20240521163401.3005045-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Validate libbpf's USDT-over-multi-uprobe logic by adding USDTs to
existing multi-uprobe tests. This checks correct libbpf fallback to
singular uprobes (when run on older kernels with buggy PID filtering).
We reuse already established child process and child thread testing
infrastructure, so additions are minimal. These test fail on either
older kernels or older version of libbpf that doesn't detect PID
filtering problems.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend existing multi-uprobe tests to test that PID filtering works
correctly. We already have child *process* tests, but we need also child
*thread* tests. This patch adds spawn_thread() helper to start child
thread, wait for it to be ready, and then instruct it to trigger desired
uprobes.
Additionally, we extend BPF-side code to track thread ID, not just
process ID. Also we detect whether extraneous triggerings with
unexpected process IDs happened, and validate that none of that happened
in practice.
These changes prove that fixed PID filtering logic for multi-uprobe
works as expected. These tests fail on old kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf is automatically (and transparently to user) detecting
multi-uprobe support in the kernel, and, if supported, uses
multi-uprobes to improve USDT attachment speed.
USDTs can be attached system-wide or for the specific process by PID. In
the latter case, we rely on correct kernel logic of not triggering USDT
for unrelated processes.
As such, on older kernels that do support multi-uprobes, but still have
broken PID filtering logic, we need to fall back to singular uprobes.
Unfortunately, whether user is using PID filtering or not is known at
the attachment time, which happens after relevant BPF programs were
loaded into the kernel. Also unfortunately, we need to make a call
whether to use multi-uprobes or singular uprobe for SEC("usdt") programs
during BPF object load time, at which point we have no information about
possible PID filtering.
The distinction between single and multi-uprobes is small, but important
for the kernel. Multi-uprobes get BPF_TRACE_UPROBE_MULTI attach type,
and kernel internally substitiute different implementation of some of
BPF helpers (e.g., bpf_get_attach_cookie()) depending on whether uprobe
is multi or singular. So, multi-uprobes and singular uprobes cannot be
intermixed.
All the above implies that we have to make an early and conservative
call about the use of multi-uprobes. And so this patch modifies libbpf's
existing feature detector for multi-uprobe support to also check correct
PID filtering. If PID filtering is not yet fixed, we fall back to
singular uprobes for USDTs.
This extension to feature detection is simple thanks to kernel's -EINVAL
addition for pid < 0.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), so there is no point to do this one extra time.
This is a drive-by improvement and has no correctness implications.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.
Fix the check in uprobe_prog_run() to perform the same task->mm check.
While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.
Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.
We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.
Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes: b733eeade4 ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.
Fixes: fbbb68de80 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de
Tariq Toukan says:
====================
mlx5 fixes 24-05-22
This patchset provides bug fixes to mlx5 core and Eth drivers.
Series generated against:
commit 9c91c7fadb ("net: mana: Fix the extra HZ in mana_hwc_send_request")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.
Fixes: 689adf0d48 ("net/mlx5e: Add UDP GSO support")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.
According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.
Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.
Fixes: 269e6b3af3 ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ptp channel instance is only initialized when ptp traffic is first
processed by the driver. This means that there is a window in between when
port timestamping is enabled and ptp traffic is sent where the ptp channel
instance is not initialized. Accessing statistics during this window will
lead to an access violation (NULL + member offset). Check the validity of
the instance before attempting to query statistics.
BUG: unable to handle page fault for address: 0000000000003524
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 109dfc067 P4D 109dfc067 PUD 1064ef067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204
RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5e_stats_ts_get+0x4c/0x130
? mlx5e_stats_ts_get+0x20/0x130
mlx5e_get_ts_stats+0x15/0x20
<snip>
Fixes: 3579032c08 ("net/mlx5e: Implement ethtool hardware timestamping statistics")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove faulty check disabling checksum offload and GSO for offload of
simple IPsec tunnel L4 traffic. Comment previously describing the deleted
code incorrectly claimed the check prevented double tunnel (or three layers
of ip headers).
Fixes: f1267798c9 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rx_create no longer allocates a modify_hdr instance that needs to be
cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer
dereference. A leak in the rules also previously occurred since there are
now two rules populated related to status.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 109907067 P4D 109907067 PUD 116890067 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? free_to_partial_list.constprop.0+0x79/0x150
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5_modify_header_dealloc+0xd/0x70
rx_create+0x374/0x590
rx_add_rule+0x3ad/0x500
? rx_add_rule+0x3ad/0x500
? mlx5_cmd_exec+0x2c/0x40
? mlx5_create_ipsec_obj+0xd6/0x200
mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0
mlx5e_xfrm_add_state+0x426/0xc00
<snip>
Fixes: 94af50c0a9 ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
