The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193441.0b54484d@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
By default clock source is selected as internal clock of 96Mhz
which is not configurable. Now we select the clock source to
external clock (ACLK) which can be configurable to different clock
ranges depending on usecase.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-3-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By default the position updates are read from dsp box when streambox
size is not defined.if the streambox size is defined to some value
then position updates can be read from the streambox.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-2-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Nicolas Frattaroli <frattaroli.nicolas@gmail.com>:
This patchset refactors the Rockchip I2S/TDM driver in order to
support the RK3588 SoC, and then adds the necessary compatible
string to load the driver for it.
Patch 1 rectifies a problem with the bindings where we were too
strict about requiring the rockchip,grf property. Most features
of this audio device don't need access to the GRF to function.
Patch 2 modifies the driver to adjust its behaviour to what the
changed bindings now allow, namely using most things without the
GRF.
Patch 3 and 4 are boring compatible string stuff that enables
RK3588 support. No special data is needed to initialise the
driver for this instance of the I2S/TDM IP.
The ADAU1372 contains 24bit ADCs and DACs. Allow the driver to use
its native mode which uses the same settings as the current 32 bit
mode.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-3-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAPM control for PGAx uses the PGA mute bit for
power management. This bit is active high but is set to
non-inverted (ie when powering, it will mute).
The ALSA control "PGA x Capture Switch" uses the active
high PGA_ENx bit, but is set to inverted. So when
enabling this switch, the PGA gets disabled.
To correct the behaviour, invert both these bits.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-4-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
"mclk" is retrieved from the configuration and assigned to adau1372->clk.
However adau1372->mclk (==NULL) is used for clk_prepare_enable() and
clk_disable_unprepare() which don't have any effect.
Remove .clk from struct adau1372 and use .mclk throughout.
This change ensures that the input clock is switched on/off when the
bias level is changed.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-2-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.
Fixes: 4bd8597dc3 ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".
Fixes: 1877c9fda1 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only IO Multiplex and two TRCM modes need access to the GRF, so
making it a hard requirement is not a wise idea, as it complicates
support for newer SoCs which do not do these things.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221025124132.399729-3-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Turns out most things don't require the GRF, so making the property
optional is the obvious move.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221025124132.399729-2-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Use EXPORT_SYMBOL_NS_GPL() instead of EXPORT_SYMBOL_GPL() and patch the
three drivers that use cs_dsp to add the MODULE_IMPORT_NS().
To make the namespace more specific the KConfig symbol for cs_dsp is
changed from CS_DSP to FW_CS_DSP.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The code in drivers/soundwire/intel_init.c is hardware-dependent and the
code does not apply to new generations starting with MeteorLake. Refactor
and clean-up the code to make this intel_init.c hardware-agnostic and
move all hardware-dependencies in the SOF driver using chip descriptors.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Writing a firmware control should be returning 1 if the control value
changed, so these two patches add that.
Though this is an ALSA requirement it is also useful for non-ALSA clients
of cs_dsp to know if the control value changed, so the main handling is
implemented in cs_dsp. TLV controls are specifically an ALSA thing so they
are handled specially in wm_adsp.
Simon Trimmer (2):
firmware: cs_dsp: cs_dsp_coeff_write_ctrl() should report changed
ASoC: wm_adsp: Return whether changed when writing controls
drivers/firmware/cirrus/cs_dsp.c | 17 ++++++++++++-----
sound/soc/codecs/wm_adsp.c | 27 ++++++++++++++++++---------
2 files changed, 30 insertions(+), 14 deletions(-)
--
2.30.2
Move all the exports into a namespace.
This also adds the MODULE_IMPORT_NS to the 3 drivers that use the
exported functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that
it is more explicit what is being referred to. This is preparation for
using the symbol to namespace the exports.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-604-uwe@kleine-koenig.org
Reviewed-by: Matt Flax <flatmax@flatmax.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-603-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-605-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-602-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In mt8186 platform, I2S2 should be the main I2S port that provide
the clock, on the contrary I2S3 should be the second I2S port that
use this clock.
Fixes: 9986bdaee4 ("ASoC: mediatek: mt8186: Configure shared clocks")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221124023050.4470-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio amplifier NAU8318 is almost functionally identical to NAU8315.
Adds compatible string "nuvoton,nau8318" for driver reuse.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20221124055658.53828-2-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_QCOM_COMMON depends on SOUNDWIRE for some symbols but this
is not explicitly specified using Kconfig depends. On the other hand
SND_SOC_QCOM_COMMON is also directly selected by the sound card
Kconfigs, this could result in various combinations and some symbols
ending up in modules and soundcard that uses those symbols as in-build
driver.
Fix these issues by explicitly specifying the dependencies of
SND_SOC_QCOM_COMMON and also use imply a to select SND_SOC_QCOM_COMMON
so that the symbol is selected based on its dependencies.
Also remove dummy stubs in common.c around CONFIG_SOUNDWIRE
Fixes: 3bd975f3ae ("ASoC: qcom: sm8250: move some code to common")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124140351.407506-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes: 24caf8d9eb ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221124140510.63468-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions that update cs_dsp controls need to handle return codes that
indicate whether the control value changed. A return code of 1 indicates
a change, 0 indicates no-change and a negative value is an error
condition.
Acked controls implicitly change value when written so a successful
write shall always report that the value changed.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165811.3014472-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA callers need to know whether there was a change to the value so
that they can report a control write change correctly.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165811.3014472-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no reason to delay the multi-link parsing, this can be done
earlier before checking the SoundWire capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The number of links is checked with a chip-dependent helper in the
caller, remove the check in drivers/soundwire/intel_init.c
This change makes intel_init.c hardware-agnostic - which is quite
fitting for a layer that only creates auxiliary devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20221111042653.45520-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functionality is implemented with per-chip callbacks, there are no
users of this symbol, remove the code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20221111042653.45520-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The number of links is stored in different registers depending on the
IP version, add sdw_check_lcount() callback. This callback only checks
that the number of links supported in hardware is compatible with the
number of links exposed in ACPI _DSD properties.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no real rationale for enabling the SoundWire interrupt in the
init, this can be done from the enable_sdw_irq() callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The offsets and sequences are identical for interrupt enabling and
disabling, we can refactor the code with a single routine and a
boolean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Different generations of Intel hardware rely on different programming
sequences to enable SoundWire IP. In existing hardware, the SoundWire
interrupt is enabled with a register field in the DSP register
space. With HDaudio multi-link extensions registers, the SoundWire
interrupt will be enabled with a generic interrupt enable field in
LCTL, without any dependency on the DSP being enabled.
Add a per-chip callback following the example of the check_sdw_irq()
model already upstream.
Note that the callback is not populated yet for MeteorLake (MTL) since
the interrupts are already enabled in the init. A follow-up patch will
move the functionality to this callback after a couple of cleanups.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the code reaches the SoundWire interrupt thread handling, the
interrupt was enabled already, and there is no code that disables it
-> this is a no-op sequence.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20221111042653.45520-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Two fixes that are result of the recent discussions [1][2].
First adds missing locking around snd_pcm_stop() while the second fix
sets substream state to DISCONNECTED if any suspend/resume related
operation fails so that userspace has means to be aware that something
went wrong during said operation.
For a BE link snd_soc_link_be_hw_params_fixup() is called by
dpcm_be_dai_hw_params() to initialize the params before it passes them
to __soc_pcm_hw_params(). Then __soc_pcm_hw_params() refines params to
match the BE codec and passes that to snd_soc_dai_hw_params().
The second call of snd_soc_link_be_hw_params_fixup() within
snd_soc_dai_hw_params() was overwriting the refined params with the
original BE CPU DAI params. This would then lead to various problems,
for example passing an invalid number of channels to the codec driver
hw_params(), or enabling more AIF widgets on the codec than are actually
mapped by TDM slots.
These errors may not be noticed on a simple 1:1 link between one CPU DAI
and one codec DAI, because most likely they have the same DAI config
(though this is not necessarily true, for example if the CPU end has dummy
TDM slots to achieve a desirable BCLK).
For 1:N mappings there are likely to be multiple codecs using different
subsets of the TDM slots and this overwriting of the refined params
can cause incorrect configuration of each codec on the link.
The erroneous extra call to the BE fixup function() was introduced
by:
commit a655de808c ("ASoC: core: Allow topology to override machine
driver FE DAI link config.")
at that time, the call to the BE fixup was already done by
dpcm_be_dai_hw_params(), which was introduced several years earlier
by:
commit 01d7584cd2 ("ASoC: dpcm: Add Dynamic PCM core operations.")
The erroneous code has changed and moved to a different source file
since the patch that introduced it, so this fix patch won't directly
apply as a fix on top of code older than:
commit 8b4ba1d317 ("ASoC: soc-dai: fix up hw params only if it is
needed")
though it can be applied with some minor adjustment to code before
that patch but after:
commit aa6166c2ac ("ASoC: soc-dai: mv soc_dai_hw_params() to soc-dai")
On any tree older than that the code is in soc-pcm.c.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221104160252.166114-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some HALO-based codecs need some additional custom setup in the
pre_run stage of cs_dsp. Implement the callback in wm_adsp to call
an optional codec driver callback.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109165331.29332-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To improve performance and overall system stability, suspend/resume
operations for ASoC cards always return success status and defer the
actual work.
Because of that, if a substream fails to resume, userspace may still
attempt to invoke commands on it as from their perspective the operation
completed successfully. Set substream's state to DISCONNECTED to ensure
no further commands are attempted.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221116115550.1100398-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_stop() shall be called with stream lock held to prevent any
races between nonatomic streaming operations.
Fixes: 2f1f570cd7 ("ASoC: Intel: avs: Coredump and recovery flow")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221116115550.1100398-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBL platform is missing the definition of 'max98357a' audio amplifier.
This amplifier is used on many KBL Chromebooks, for instance variant
'nami' of 'Google/poppy' baseboard.
Reported-by: CoolStar <coolstarorganization@gmail.com>
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Link: https://lore.kernel.org/r/Y3wHyJ/EcsLRHGr3@tora
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio hardware configuration of SKU 0C11 product is rt711 on link0,
two rt1318s on link1 and link2, rt714 on link3
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221117002758.496211-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKU 0C11 product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221117002758.496211-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
