As now we are telling the necessity of post DMA flush per CPU type,
there is no need to select ARCH_HAS_SYNC_DMA_FOR_CPU on per platform
bias, just select it unconditionally and we can sort it at runtime.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch_setup_dma_ops on MIPS sets coherency information in struct device.
It's essential for per-device coherency to work.
Select it for all non-coherent platforms.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 1b00767fd8 ("MIPS: Remove PMC MSP71xx platform") removes all uses
of the config IRQ_MSP_CIC and IRQ_MSP_SLP.
Remove these two obsolete configs IRQ_MSP_CIC and IRQ_MSP_SLP.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 85b9686dae ("MIPS: ath79: drop platform device registration code")
removes all files arch/mips/ath79/dev-*.[ch], adjusts the Makefile, but
misses to adjust the Kconfig file. Hence, since then, the configs
ATH79_DEV_* are really dead.
Commit 3a77e0d75e ("MIPS: ath79: drop machfiles") already removes all
configs that select ATH79_DEV_* config. So at that point, they was not a
way to enable them with a kernel build configuration.
Remove these obsolete ATH79_DEV_* configs.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MT7620 SoCs have their own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
So that MT7620_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
RT288X SoCs have their own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
So that RT2880_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
RT3883 SoC have its own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
So that RT3883_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
RT305x SoCs have their own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
So that RT305X_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add two Loongson-1 based boards: LSGZ 1B and Smartloong 1C.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It is clearly stated on "Loongson 3A3000/3B3000 processor
user manual vol 2" that
"All access requests using a non-cached algorithm are executed in a
blocking order. That is, before the current read request data is
returned to the processor, all subsequent requests are blocked and issued;
All subsequent requests are blocked until the write request data has been
sent or the issued write request has not received a write reply from the
final receiver."
Which means uncached read/write is strongly ordered. So we won't need this
workaround.
This option was introduced when we add initial support for GS464E, it looks
like a misinterpretation of another section in the manual saying we need
barriers to ensure MMIO order against DMA requests.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Q: Do we have really have write buffer
A: Yes, on newer Loongson processors there is a "store fill buffer"
that will collect *cached* writes, on all Loongson processors
AXI crossbar will buffer all writes.
Q: Then why do we want to remove CPU_HAS_WB?
A: Because CPU_HAS_WB introduces wbflush, which intends to flush
all write reuqests to mmio device. We won't be affected by store
fill buffer because it won't buffer uncached writes. And a regular
memory barrier is sufficient to flush crossbar write buffer.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Previously every write to SMP regisers are followed by nudge_writes,
this incures a huge performance penalty because nudge_writes involves
SYNC, which will be globalized on chip.
Only set off nudge_writes when we really want other cores to see the
result ASAP. Also replace read/write functions to relaxed version because
we don't need extra barriers to protect against DMA.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
wbflush here intends to let other cores see the results ASAP,
nudge_writes fits this purpose better.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
They are truely mmio pointers, so give them proper prefix.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It's a BCM5358 based home router. One of very few bcm47xx devices with
cellular modems (here: LTE).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This reverts part of commit 015b8cc5e7 ("wifi: cfg80211: Fix use after
free for wext")
This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZA5EKRIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JJ8AEAsyyMKJ73ETZlac1S4ZOfEsEl1gZ6+cFb
UuuNcz+XfuYBAOHmrFy3DKqLM58Jgf3OUn4C0i7ldNbkv6WTidifVG8B
=rCK8
-----END PGP SIGNATURE-----
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d5 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d5 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
* Fix an off by one error when discarding folios after writeback
failure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZAYvQwAKCRBKO3ySh0YR
pjMXAP9X9HozNYESlg/cMq6nY2XfbHIR2qvNOfopiRpWby5xQAEAqBiEhafIJ0A1
mTt+0TqQxDsH+uxr/QEUm76Q7F3f1gE=
=0zU0
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Here are 4 small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to execute
various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as now
in 6.3-rc1 we have a "real" wifi driver for one that includes support
for many many more devices than this old driver did. So it's time to
remove it as it is no longer needed. The maintainers of this driver all
have acked its removal. Many thanks to them over the years for working
to clean it up and keep it working while the real driver was being
developed.
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZA3mHQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZRgCeJOPM59FrL5n6MUnxyBfjLW8v/rUAmweESb6C
ofjiP1rkzkE9zocXSQiI
=clcQ
-----END PGP SIGNATURE-----
Merge tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
impact to anything as those machines will fallback to XSAVEC which is
equivalent there.
-----BEGIN PGP SIGNATURE-----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=u6kj
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZA2l2QAKCRCRxhvAZXjc
okR1AP9UjPVvVTU3DRp7Giqyv1rdv/iaCVRtEDQmhzDflksioQEAyJXTt+3YOTNl
sSocNYBhVBsijelICeq7hZrmVP9CrgM=
=C0cC
-----END PGP SIGNATURE-----
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZA2yXAAKCRCRxhvAZXjc
opK7AP0fqkk75P1bRZL36iNOgCV0RDiSN/Ynk/oMYpsOyBndlAD7BKCEZFF2OKzP
aeJrY0F+guwL67X+18X+yiLZrk2rag4=
=2Wa/
-----END PGP SIGNATURE-----
Merge tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQNVwIACgkQ8vlZVpUN
gaMwmgf/ZAasXZEMV0zaQZa8zP4KvMKZjWe6azkcJg4sb/HG9Q7JzeJDCurhhWUj
8+QnyUcuKTyWKYWjGf0f5CZaYEM5AZYij41UJzu2qMkz5hVXSqBVuY8KywxuiJv5
kfuIvQh0Onv0Yrg2qAc52/kZkq1lu2sl/F5ertBWjdpTUXdBUdrCxkUk+1BgQWAj
vNwi1/+gNuX7RxMboHqYmwXFP39vECd+wteNdsiK1hR8bLqL68duLLq8xQdHt4gS
sbVmJKR4j2Giw4ZnlYi9RiwKIO0beqocanp+cfOPulyj5mTM8X1lr0uvaLZgx2AF
lqrS3/5ksp45cRT70qCIz8je70hTSg==
=nN3T
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* final coversions of drivers away from deprecated .probe
* make .probe_new the standard probe and convert I2C core to use it
-----BEGIN PGP SIGNATURE-----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=jm/G
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes: 91cc8fbcc8 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
20 Fixes all in drivers except the one zone storage revalidation fix
to sd. The megaraid_sas fixes are more on the level of a driver
update (enabling crash dump and increasing lun number) but I thought
you could let this slide on -rc1 and the next most extensive update is
a load of fixes to mpi3mr.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAuqwyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVm/AP4t1E3w
Jc19sSzMV6OZc5x1eTSGzso80fkTeFgVXWOmcQD9G6ymH78hS0cb7FRIwtnHcV5r
6TwbInHF2LwNKzPhuMI=
=BdqN
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
