The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.
Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Intel platforms (Skylake and newer), ASPM support in r8169 is the
last missing puzzle to let CPU's Package C-State reaches PC8. Without
ASPM support, the CPU cannot reach beyond PC3. PC8 can save additional
~3W in comparison with PC3 on a Coffee Lake platform, Dell G3 3779.
This is based on the work from Chunhao Lin <hau@realtek.com>.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable or disable ASPM should be done in PCI core instead of in the
device driver.
Commit ba04c7c93b ("r8169: disable ASPM") uses
pci_disable_link_state() to disable ASPM, but it's not the best way to
do it. If the device really wants to disable ASPM, we can use a quirk in
PCI core to prevent the PCI core from setting ASPM before probe.
Let's remove pci_disable_link_state() for now. Use PCI core quirks if
any regression happens.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit makes BBR use only the MSS (without any headers) to
calculate pacing rates when internal TCP-layer pacing is used.
This is necessary to achieve the correct pacing behavior in this case,
since tcp_internal_pacing() uses only the payload length to calculate
pacing delays.
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior says:
====================
net/usb: Use irqsave in USB's complete callback
This is about using _irqsave() primitives in the completion callback in
order to get rid of local_irq_save() in __usb_hcd_giveback_urb().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: Petko Manolov <petkan@nucleusys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior says:
====================
ISDN: use irqsave() in URB completion + usb_fill_int_urb
This series is mostly about using _irqsave() primitives in the
completion callback in order to get rid of local_irq_save() in
__usb_hcd_giveback_urb(). While at it, I also tried to move drivers to
use usb_fill_int_urb() otherwise it is hard find users of a certain API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The USB completion callback does not disable interrupts while acquiring
the ->lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using usb_fill_int_urb() helps to find code which initializes an
URB. A grep for members of the struct (like ->complete) reveal lots
of other things, too.
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using usb_fill_int_urb() helps to find code which initializes an
URB. A grep for members of the struct (like ->complete) reveal lots
of other things, too.
The `interval' parameter is now set differently on HS and SS. The
argument is fed from bInterval so it should be the right thing to do.
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using usb_fill_int_urb() helps to find code which initializes an
URB. A grep for members of the struct (like ->complete) reveal lots
of other things, too.
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: gigaset307x-common@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
fixes for ipsec selftests
A couple of bad behaviors in the ipsec selftest were pointed out
by Anders Roxell <anders.roxell@linaro.org> and are addressed here.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Find an IP address on this machine to use as a source IP, and
make up a destination IP address based on the source IP. No
actual messages will be sent, just a couple of IPsec rules are
created and deleted.
Fixes: 5e596ee171 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the "ip xfrm monitor" subprogram so as to not see
a "Terminated" message when the subprogram is killed.
Fixes: 5e596ee171 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving multiple packets with the same ts ecr value, only try
to compute rcv_rtt sample with the earliest received packet.
This is because the rcv_rtt calculated by later received packets
could possibly include long idle time or other types of delay.
For example:
(1) server sends last packet of reply with TS val V1
(2) client ACKs last packet of reply with TS ecr V1
(3) long idle time passes
(4) client sends next request data packet with TS ecr V1 (again!)
At this time, the rcv_rtt computed on server with TS ecr V1 will be
inflated with the idle time and should get ignored.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NeilBrown says:
====================
Assorted rhashtables cleanups.
Following 7 patches are selections from a recent RFC series I posted
that have all received suitable Acks.
The most visible changes are that rhashtable-types.h is now preferred
for inclusion in include/linux/*.h rather than rhashtable.h, and
that the full hash is used - no bits a reserved for a NULLS pointer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using rht_dereference_bucket() to dereference
->future_tbl looks like a type error, and could be confusing.
Using rht_dereference_rcu() to test a pointer for NULL
adds an unnecessary barrier - rcu_access_pointer() is preferred
for NULL tests when no lock is held.
This uses 3 different ways to access ->future_tbl.
- if we know the mutex is held, use rht_dereference()
- if we don't hold the mutex, and are only testing for NULL,
use rcu_access_pointer()
- otherwise (using RCU protection for true dereference),
use rht_dereference_rcu().
Note that this includes a simplification of the call to
rhashtable_last_table() - we don't do an extra dereference
before the call any more.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than borrowing one of the bucket locks to
protect ->future_tbl updates, use cmpxchg().
This gives more freedom to change how bucket locking
is implemented.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we don't use the hash value or shift in nested_table_alloc()
there is room for simplification.
We only need to pass a "is this a leaf" flag to nested_table_alloc(),
and don't need to track as much information in
rht_bucket_nested_insert().
Note there is another minor cleanup in nested_table_alloc() here.
The number of elements in a page of "union nested_tables" is most naturally
PAGE_SIZE / sizeof(ntbl[0])
The previous code had
PAGE_SIZE / sizeof(ntbl[0].bucket)
which happens to be the correct value only because the bucket uses all
the space in the union.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'ht' and 'hash' arguments to INIT_RHT_NULLS_HEAD() are
no longer used - so drop them. This allows us to also
remove the nhash argument from nested_table_alloc().
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This "feature" is unused, undocumented, and untested and so doesn't
really belong. A patch is under development to properly implement
support for detecting when a search gets diverted down a different
chain, which the common purpose of nulls markers.
This patch actually fixes a bug too. The table resizing allows a
table to grow to 2^31 buckets, but the hash is truncated to 27 bits -
any growth beyond 2^27 is wasteful an ineffective.
This patch results in NULLS_MARKER(0) being used for all chains,
and leaves the use of rht_is_a_null() to test for it.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the use of rhashtables in net namespaces,
rhashtable.h is included in lots of the kernel,
so a small changes can required a large recompilation.
This makes development painful.
This patch splits out rhashtable-types.h which just includes
the major type declarations, and does not include (non-trivial)
inline code. rhashtable.h is no longer included by anything
in the include/ directory.
Common include files only include rhashtable-types.h so a large
recompilation is only triggered when that changes.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
print_ht in rhashtable_test calls rht_dereference() with neither
RCU protection or the mutex. This triggers an RCU warning.
So take the mutex to silence the warning.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dst_cid and src_cid are 64 bits, therefore 64 bit accessors should be
used, and in fact in virtio_transport_common.c only 64 bit accessors are
used. Using 32 bit accessors for 64 bit values breaks big endian systems.
This patch fixes a wrong use of le32_to_cpu in virtio_transport_send_pkt.
Fixes: b911682318 ("VSOCK: add loopback to virtio_transport")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function cpdma_desc_pool_create is local to the source and does not
need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'cpdma_desc_pool_create' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ross Lagerwall says:
====================
xen-netfront: Fix issues with commit f599c64fdf
Fix a couple of issues with commit f599c64fdf ("xen-netfront: Fix race
between device setup and open").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the features after calling register_netdev() otherwise the
device features are not set up correctly and it not possible to change
the MTU of the device. After this change, the features reported by
ethtool match the device's features before the commit which introduced
the issue and it is possible to change the device's MTU.
Fixes: f599c64fdf ("xen-netfront: Fix race between device setup and open")
Reported-by: Liam Shepherd <liam@dancer.es>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: f599c64fdf ("xen-netfront: Fix race between device setup and open")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If flower filter is created without the skip_sw flag, fl_mask_put()
can race with fl_classify() and we can destroy the mask rhashtable
while a lookup operation is accessing it.
BUG: unable to handle kernel paging request at 00000000000911d1
PGD 0 P4D 0
SMP PTI
CPU: 3 PID: 5582 Comm: vhost-5541 Not tainted 4.18.0-rc1.vanilla+ #1950
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
RIP: 0010:rht_bucket_nested+0x20/0x60
Code: 31 c8 c1 c1 18 29 c8 c3 66 90 8b 4f 04 ba 01 00 00 00 8b 07 48 8b bf 80 00 00 0
RSP: 0018:ffffafc5cfbb7a48 EFLAGS: 00010206
RAX: 0000000000001978 RBX: ffff9f12dff88a00 RCX: 00000000ffff9f12
RDX: 00000000000911d1 RSI: 0000000000000148 RDI: 0000000000000001
RBP: ffff9f12dff88a00 R08: 000000005f1cc119 R09: 00000000a715fae2
R10: ffffafc5cfbb7aa8 R11: ffff9f1cb4be804e R12: ffff9f1265e13000
R13: 0000000000000000 R14: ffffafc5cfbb7b48 R15: ffff9f12dff88b68
FS: 0000000000000000(0000) GS:ffff9f1d3f0c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000911d1 CR3: 0000001575a94006 CR4: 00000000001626e0
Call Trace:
fl_lookup+0x134/0x140 [cls_flower]
fl_classify+0xf3/0x180 [cls_flower]
tcf_classify+0x78/0x150
__netif_receive_skb_core+0x69e/0xa50
netif_receive_skb_internal+0x42/0xf0
tun_get_user+0xdd5/0xfd0 [tun]
tun_sendmsg+0x52/0x70 [tun]
handle_tx+0x2b3/0x5f0 [vhost_net]
vhost_worker+0xab/0x100 [vhost]
kthread+0xf8/0x130
ret_from_fork+0x35/0x40
Modules linked in: act_mirred act_gact cls_flower vhost_net vhost tap sch_ingress
CR2: 00000000000911d1
Fix the above waiting for a RCU grace period before destroying the
rhashtable: we need to use tcf_queue_work(), as rhashtable_destroy()
must run in process context, as pointed out by Cong Wang.
v1 -> v2: use tcf_queue_work to run rhashtable_destroy().
Fixes: 05cd271fd6 ("cls_flower: Support multiple masks per priority")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sha: 702353b538 ("selftest: add test for TCP_INQ") forgot to add
tcp_inq to .gitignore.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When delta passed to gem_ptp_adjtime is negative, the sign is
maintained in the ns_to_timespec64 conversion. Hence timespec_add
should be used directly. timespec_sub will just subtract the negative
value thus increasing the time difference.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 296d485680 ("ipvlan: inherit MTU from master device") adjusted
the mtu from the master device when creating a ipvlan device, but it
would also override the mtu value set in rtnl_create_link. It causes
IFLA_MTU param not to take effect.
So this patch is to not adjust the mtu if IFLA_MTU param is set when
creating a ipvlan device.
Fixes: 296d485680 ("ipvlan: inherit MTU from master device")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it is incrementing SctpFragUsrMsgs when the user message size
is of the exactly same size as the maximum fragment size, which is wrong.
The fix is to increment it only when user message is bigger than the
maximum fragment size.
Fixes: bfd2e4b873 ("sctp: refactor sctp_datamsg_from_user")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 9facc33687 ("bpf: reject any prog that failed read-only lock")
offsetof(struct bpf_binary_header, image) became 3 instead of 4,
breaking powerpc BPF badly, since instructions need to be word aligned.
Fixes: 9facc33687 ("bpf: reject any prog that failed read-only lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When injecting frames in the Ocelot switch driver an injection header
(IFH) should be used to configure various parameters related to a given
frame, such as the port onto which the frame should be departed or its
vlan id. Other parameters in the switch configuration can led to an
injected frame being sent without an IFH but this led to various issues
as the per-frame parameters are then not used. This is especially true
when using multiple ports for injection.
The IFH was injected with the wrong endianness which led to the switch
not taking it into account as the IFH_INJ_BYPASS bit was then unset.
(The bit tells the switch to use the IFH over its internal
configuration). This patch fixes it.
In addition to the endianness fix, the IFH is also fixed. As it was
(unwillingly) unused, some of its fields were not configured the right
way.
Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device tree based systems without of_dev_auxdata will have the mdio
device named differently than "davinci_mdio(.0)". In this case use the
device's parent's compatible string for matching
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the correct thing to rtl8169_interrupt() from netpoll.
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: netdev@vger.kernel.org
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: ebcd5daa7f ("r8169: change interrupt handler argument type")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function strp_data_ready(), it is useless to call queue_work if
the state of strparser is already paused. The state checking should
be done before calling queue_work. The change reduces the context
switches and improves the ktls-rx throughput by approx 20% (measured
on cortex-a53 based platform).
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add fragments to pass bridge and vlan tests.
Fixes: 33b01b7b4f ("selftests: add rtnetlink test script")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use $(OBJDUMP) instead of literal 'objdump' to avoid
using host toolchain when cross compiling.
Fixes: 421780fd49 ("bpfilter: fix build error")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gjuy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Here are eight fairly small fixes collected over the last two weeks.
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/rxe: Fix missing completion for mem_reg work requests
RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
IB/mlx5: Fix return value check in flow_counters_set_data()
IB/mlx5: Fix memory leak in mlx5_ib_create_flow
IB/rxe: avoid double kfree skb
Pull networking fixes from David Miller:
1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.
2) Fix ATM VCC memory accounting, from David Woodhouse.
3) fib6_info objects need RCU freeing, from Eric Dumazet.
4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.
5) Fix clobbered error code in enic_open() failure path, from
Govindarajulu Varadarajan.
6) Propagate dev_get_valid_name() error returns properly, from Li
RongQing.
7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.
8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
Davide Caratti.
9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
ip: limit use of gso_size to udp
stmmac: fix DMA channel hang in half-duplex mode
net: stmmac: socfpga: add additional ocp reset line for Stratix10
net: sungem: fix rx checksum support
bpfilter: ignore binary files
bpfilter: fix build error
net/usb/drivers: Remove useless hrtimer_active check
net/sched: act_ife: preserve the action control in case of error
net/sched: act_ife: fix recursive lock and idr leak
net: ethernet: fix suspend/resume in davinci_emac
net: propagate dev_get_valid_name return code
enic: do not overwrite error code
net/tcp: Fix socket lookups with SO_BINDTODEVICE
ptp: replace getnstimeofday64() with ktime_get_real_ts64()
net/ipv6: respect rcu grace period before freeing fib6_info
net: net_failover: fix typo in net_failover_slave_register()
ipvlan: use ETH_MAX_MTU as max mtu
net: hamradio: use eth_broadcast_addr
enic: initialize enic->rfs_h.lock in enic_probe
MAINTAINERS: Add Sam as the maintainer for NCSI
...
Pull HID fixes from Jiri Kosina:
- Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke
- fix for hibernation in Intel ISH driver, from Even Xu
- crash fix for hid-steam driver, from Rodrigo Rivas Costa
- new device ID addition to google-hammer driver
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large
HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation
HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
HID: google: Add support for whiskers
-----BEGIN PGP SIGNATURE-----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=PrOL
-----END PGP SIGNATURE-----
Merge tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping rename from Christoph Hellwig:
"Move all the dma-mapping code to kernel/dma and lose their dma-*
prefixes"
* tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move all DMA mapping code to kernel/dma
dma-mapping: use obj-y instead of lib-y for generic dma ops
