The CRYPTO_TFM_RES_WEAK_KEY flag was apparently meant as a way to make
the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
There are also no tests that verify that all algorithms actually set (or
don't set) it correctly.
This is also the last remaining CRYPTO_TFM_RES_* flag, which means that
it's the only thing still needing all the boilerplate code which
propagates these flags around from child => parent tfms.
And if someone ever needs to distinguish this error in the future (which
is somewhat unlikely, as it's been unneeded for a long time), it would
be much better to just define a new return value like -EKEYREJECTED.
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flag CRYPTO_TFM_RES_BAD_BLOCK_LEN is never checked for, and it's
only set by one driver. And even that single driver's use is wrong
because the driver is setting the flag from ->encrypt() and ->decrypt()
with no locking, which is unsafe because ->encrypt() and ->decrypt() can
be executed by many threads in parallel on the same tfm.
Just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tfm result flags CRYPTO_TFM_RES_BAD_KEY_SCHED and
CRYPTO_TFM_RES_BAD_FLAGS are never used, so remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HMAC keys can be of any length, and atmel_sha_hmac_key_set() can only
fail due to -ENOMEM. But atmel_sha_hmac_setkey() incorrectly treated
any error as a "bad key length" error. Fix it to correctly propagate
the -ENOMEM error code and not set any tfm result flags.
Fixes: 81d8750b2b ("crypto: atmel-sha - add support to hmac(shaX)")
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The chelsio crypto driver is casting 'struct crypto_aead' directly to
'struct crypto_tfm', which is incorrect because the crypto_tfm isn't the
first field of 'struct crypto_aead'. Consequently, the calls to
crypto_tfm_set_flags() are modifying some other field in the struct.
Also, the driver is setting CRYPTO_TFM_RES_BAD_KEY_LEN in
->setauthsize(), not just in ->setkey(). This is incorrect since this
flag is for bad key lengths, not for bad authentication tag lengths.
Fix these bugs by removing the broken crypto_tfm_set_flags() calls from
->setauthsize() and by fixing them in ->setkey().
Fixes: 324429d741 ("chcr: Support for Chelsio's Crypto Hardware")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
skcipher_walk_aead() is unused and is identical to
skcipher_walk_aead_encrypt(), so remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update tee.txt with AMD-TEE driver details. The driver is written
to communicate with AMD's TEE.
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AMD-TEE driver should check if TEE is available before
registering itself with TEE subsystem. This ensures that
there is a TEE which the driver can talk to before proceeding
with tee device node allocation.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds AMD-TEE driver.
* targets AMD APUs which has AMD Secure Processor with software-based
Trusted Execution Environment (TEE) support
* registers with TEE subsystem
* defines tee_driver_ops function callbacks
* kernel allocated memory is used as shared memory between normal
world and secure world.
* acts as REE (Rich Execution Environment) communication agent, which
uses the services of AMD Secure Processor driver to submit commands
for processing in TEE environment
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow compilation of tee subsystem for AMD's CPUs which have a dedicated
AMD Secure Processor for Trusted Execution Environment (TEE).
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow the user to choose whether to build support for all algorithms
(default), hashes-only, or skciphers-only.
The QCE engine does not appear to scale as well as the CPU to handle
multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
QCE handles only 2 requests in parallel.
Ipsec throughput seems to improve when disabling either family of
algorithms, sharing the load with the CPU. Enabling skciphers-only
appears to work best.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where
AES-192 is not handled by the qce hardware, and don't allocate & free
the fallback skcipher for other algorithms.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the IV after the completion of each cipher operation.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When ctr-aes-qce is used for gcm-mode, an extra sg entry for the
authentication tag is present, causing trouble when the qce driver
prepares the dst-results sg table for dma.
It computes the number of entries needed with sg_nents_for_len, leaving
out the tag entry. Then it creates a sg table with that number plus
one, used to store a result buffer.
When copying the sg table, there's no limit to the number of entries
copied, so the extra slot is filled with the authentication tag sg.
When the driver tries to add the result sg, the list is full, and it
returns EINVAL.
By limiting the number of sg entries copied to the dest table, the slot
for the result buffer is guaranteed to be unused.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
XTS-mode uses two keys, so the keysizes should be doubled in
skcipher_def, and halved when checking if it is AES-128/192/256.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher,
adding the definition for chucksize instead, where the underlying block
size belongs.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces the skcipher_ialg_simple helper which fetches
the crypto_alg structure from a simple skcipher instance's spawn.
This allows us to remove the third argument from the function
skcipher_alloc_instance_simple.
In doing so the reference count to the algorithm is now maintained
by the Crypto API and the caller no longer needs to drop the alg
refcount.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Freed work request skbs when connection terminates.
enqueue_wr()/ dequeue_wr() is shared between softirq
and application contexts, should be protected by socket
lock. Moved dequeue_wr() to appropriate file.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support to set 256 bit key to the hardware from
setsockopt for AES256-GCM based ciphers.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The i.MX8M Mini uses the same crypto engine as the i.MX8MQ, but
the driver is restricting the check to just the i.MX8MQ.
This patch expands the check for either i.MX8MQ or i.MX8MM.
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes crypto_grab_spawn to retain the reference count
on the algorithm. This is because the caller needs to access the
algorithm parameters and without the reference count the algorithm
can be freed at any time.
The reference count will be subsequently dropped by the crypto API
once the instance has been registered. The helper crypto_drop_spawn
will also conditionally drop the reference count depending on whether
it has been registered.
Note that the code is actually added to crypto_init_spawn. However,
unless the caller activates this by setting spawn->dropref beforehand
then nothing happens. The only caller that sets dropref is currently
crypto_grab_spawn.
Once all legacy users of crypto_init_spawn disappear, then we can
kill the dropref flag.
Internally each instance will maintain a list of its spawns prior
to registration. This memory used by this list is shared with
other fields that are only used after registration. In order for
this to work a new flag spawn->registered is added to indicate
whether spawn->inst can be used.
Fixes: d6ef2f198d ("crypto: api - Add crypto_grab_spawn primitive")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sun4i_ss_pm_ops is not referenced outside the driver
except via a pointer, so make it static to avoid the following
warning:
drivers/crypto/allwinner/sun4i-ss/sun4i-ss-core.c:276:25: warning: symbol 'sun4i_ss_pm_ops' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Somehow these were dropped when Zinc was being integrated, which is
problematic, because testing the library interface for Curve25519 is
important.. This commit simply adds them back and wires them in in the
same way that the blake2s selftests are wired in.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some of the algorithm unregistration functions return -ENOENT when asked
to unregister a non-registered algorithm, while others always return 0
or always return void. But no users check the return value, except for
two of the bulk unregistration functions which print a message on error
but still always return 0 to their caller, and crypto_del_alg() which
calls crypto_unregister_instance() which always returns 0.
Since unregistering a non-registered algorithm is always a kernel bug
but there isn't anything callers should do to handle this situation at
runtime, let's simplify things by making all the unregistration
functions return void, and moving the error message into
crypto_unregister_alg() and upgrading it to a WARN().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In an effort to clarify and simplify the annotation of assembly functions
in the kernel new macros have been introduced. These replace ENTRY and
ENDPROC and also add a new annotation for static functions which previously
had no ENTRY equivalent. Update the annotations in the crypto code to the
new macros.
There are a small number of files imported from OpenSSL where the assembly
is generated using perl programs, these are not currently annotated at all
and have not been modified.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CTR transfer works in fragments of data of maximum 1 MByte because
of the 16 bit CTR counter embedded in the IP. Fix the CTR counter
overflow handling for messages larger than 1 MByte.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 781a08d974 ("crypto: atmel-aes - Fix counter overflow in CTR mode")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
chcr driver was not using the number of channels from lld and
assuming that there are always two channels available. With following
patch chcr will use number of channel as passed by cxgb4.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not update the IV in case of errors.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even when deferring, we would like to know what caused it.
Update dev_warn to dev_err because if the DMA init fails,
the probe is stopped.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'direction' member of the dma_slave_config will be going away
as it duplicates the direction given in the prepare call.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
device_terminate_all() is used to abort all the pending and
ongoing transfers on the channel, it should be used just in the
error path.
Also, dmaengine_terminate_all() is deprecated and one should use
dmaengine_terminate_async() or dmaengine_terminate_sync(). The method
is not used in atomic context, use dmaengine_terminate_sync().
A secondary aspect of this patch is that it luckily avoids a deadlock
between atmel_aes and at_hdmac.c. While in tasklet with the lock held,
the dma controller invokes the client callback (dmaengine_terminate_all),
which tries to get the same lock. The at_hdmac fix would be to drop the
lock before invoking the client callback, a fix on at_hdmac will follow.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:
ld: drivers/crypto/amlogic/amlogic-gxl-core.o: in function `meson_crypto_probe':
drivers/crypto/amlogic/amlogic-gxl-core.c:240: undefined reference to `devm_platform_ioremap_resource'
Fix the build error by adding the unspecified dependency.
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently CONFIG_CRYPTO_DEV_SAFEXCEL=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:
ld: drivers/crypto/inside-secure/safexcel.o: in function `safexcel_probe':
drivers/crypto/inside-secure/safexcel.c:1692: undefined reference to `devm_platform_ioremap_resource'
Fix the build error by adding the unspecified dependency.
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes another hang case on the EIP97 caused by sending
invalidation tokens to the hardware when doing basic (3)DES ECB/CBC
operations. Invalidation tokens are an EIP197 feature and needed nor
supported by the EIP97. So they should not be sent for that device.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The EIP97 hardware cannot handle zero length input data and will (usually)
hang when presented with this anyway. This patch converts any zero length
input to a 1 byte dummy input to prevent this hanging.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the additions of support for modes like AES-CCM and AES-GCM, which
require large command tokens, the size of the descriptor has grown such that
it now does not fit into the descriptor cache of a standard EIP97 anymore.
This means that the driver no longer works on the Marvell Armada 3700LP chip
(as used on e.g. Espressobin) that it has always supported.
Additionally, performance on EIP197's like Marvell A8K may also degrade
due to being able to fit less descriptors in the on-chip cache.
Putting these tokens into the descriptor was really a hack and not how the
design was supposed to be used - resource allocation did not account for it.
So what this patch does, is move the command token out of the descriptor.
To avoid having to allocate buffers on the fly for these command tokens,
they are stuffed in a "shadow ring", which is a circular buffer of fixed
size blocks that runs in lock-step with the descriptor ring. i.e. there is
one token block per descriptor. The descriptor ring itself is then pre-
populated with the pointers to these token blocks so these do not need to
be filled in when building the descriptors later.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y, the first lookup of an
algorithm that needs to be instantiated using a template will always get
the generic implementation, even when an accelerated one is available.
This happens because the extra self-tests for the accelerated
implementation allocate the generic implementation for comparison
purposes, and then crypto_alg_tested() for the generic implementation
"fulfills" the original request (i.e. sets crypto_larval::adult).
This patch fixes this by only fulfilling the original request if
we are currently the best outstanding larval as judged by the
priority. If we're not the best then we will ask all waiters on
that larval request to retry the lookup.
Note that this patch introduces a behaviour change when the module
providing the new algorithm is unregistered during the process.
Previously we would have failed with ENOENT, after the patch we
will instead redo the lookup.
Fixes: 9a8a6b3f09 ("crypto: testmgr - fuzz hashes against...")
Fixes: d435e10e67 ("crypto: testmgr - fuzz skciphers against...")
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against...")
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously double buffering was used for storing previous and next
"less-than-block-size" bytes. Double buffering can be removed by moving
the copy of next "less-than-block-size" bytes after current request is
executed by HW.
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously double buffering was used for storing previous and next
"less-than-block-size" bytes. Double buffering can be removed by moving
the copy of next "less-than-block-size" bytes after current request is
executed by HW.
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since tasklet is needed to be initialized before registering IRQ
handler, adjust the position of tasklet_init to fix the wrong order.
Besides, to fix the missed tasklet_kill, this patch adds a helper
function and uses devm_add_action to kill the tasklet automatically.
Fixes: ce92136843 ("crypto: picoxcell - add support for the picoxcell crypto engines")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Just like in 4a97bfc796 ("crypto: hisilicon - no need to check return
value of debugfs_create functions"), there still is no need to ever
check the return value. The function can work or not, but the code
logic should never do something different based on this.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the functionality of AMD Secure Processor (SP) driver by
providing an in-kernel API to submit commands to TEE ring buffer for
processing by Trusted OS running on AMD Secure Processor.
Following TEE commands are supported by Trusted OS:
* TEE_CMD_ID_LOAD_TA : Load Trusted Application (TA) binary into
TEE environment
* TEE_CMD_ID_UNLOAD_TA : Unload TA binary from TEE environment
* TEE_CMD_ID_OPEN_SESSION : Open session with loaded TA
* TEE_CMD_ID_CLOSE_SESSION : Close session with loaded TA
* TEE_CMD_ID_INVOKE_CMD : Invoke a command with loaded TA
* TEE_CMD_ID_MAP_SHARED_MEM : Map shared memory
* TEE_CMD_ID_UNMAP_SHARED_MEM : Unmap shared memory
Linux AMD-TEE driver will use this API to submit command buffers
for processing in Trusted Execution Environment. The AMD-TEE driver
shall be introduced in a separate patch.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
