Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/task.c:383: warning: Function parameter or member 'isci_host' not described in 'isci_task_send_lu_reset_sas'
drivers/scsi/isci/task.c:383: warning: Function parameter or member 'isci_device' not described in 'isci_task_send_lu_reset_sas'
drivers/scsi/isci/task.c:677: warning: Excess function parameter 'lun' description in 'isci_task_query_task'
Link: https://lore.kernel.org/r/20210317091230.2912389-23-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/host.c:93: warning: Cannot understand *
drivers/scsi/isci/host.c:108: warning: Function parameter or member 'x' not described in 'NORMALIZE_PUT_POINTER'
drivers/scsi/isci/host.c:121: warning: Function parameter or member 'x' not described in 'NORMALIZE_EVENT_POINTER'
drivers/scsi/isci/host.c:130: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER'
drivers/scsi/isci/host.c:139: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER_CYCLE_BIT'
drivers/scsi/isci/host.c:146: warning: Function parameter or member 'x' not described in 'COMPLETION_QUEUE_CYCLE_BIT'
drivers/scsi/isci/host.c:646: warning: Function parameter or member 'ihost' not described in 'isci_host_start_complete'
drivers/scsi/isci/host.c:646: warning: Excess function parameter 'isci_host' description in 'isci_host_start_complete'
drivers/scsi/isci/host.c:680: warning: Function parameter or member 'ihost' not described in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:680: warning: Excess function parameter 'controller' description in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:903: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:903: warning: Excess function parameter 'scic' description in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:1159: warning: Function parameter or member 'ihost' not described in 'sci_controller_stop'
drivers/scsi/isci/host.c:1159: warning: Excess function parameter 'controller' description in 'sci_controller_stop'
drivers/scsi/isci/host.c:1184: warning: Function parameter or member 'ihost' not described in 'sci_controller_reset'
drivers/scsi/isci/host.c:1184: warning: Excess function parameter 'controller' description in 'sci_controller_reset'
drivers/scsi/isci/host.c:1352: warning: Function parameter or member 'ihost' not described in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:1352: warning: Excess function parameter 'controller' description in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'ihost' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'idev' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: expecting prototype for This method allocates remote node index and the reserves the remote node(). Prototype was for sci_controller_allocate_remote_node_context() instead
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'idev' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ireq' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'controller' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'remote_device' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'task_request' description in 'sci_controller_start_task'
Link: https://lore.kernel.org/r/20210317091230.2912389-22-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/request.c:211: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:414: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:472: warning: Function parameter or member 'ireq' not described in 'scu_ssp_task_request_construct_task_context'
drivers/scsi/isci/request.c:472: warning: expecting prototype for The(). Prototype was for scu_ssp_task_request_construct_task_context() instead
drivers/scsi/isci/request.c:501: warning: Function parameter or member 'ireq' not described in 'scu_sata_request_construct_task_context'
drivers/scsi/isci/request.c:501: warning: expecting prototype for This method is will fill in the SCU Task Context for any type of SATA(). Prototype was for scu_sata_request_construct_task_context() instead
drivers/scsi/isci/request.c:597: warning: Cannot understand *
drivers/scsi/isci/request.c:785: warning: expecting prototype for sci_req_tx_bytes(). Prototype was for SCU_TASK_CONTEXT_SRAM() instead
drivers/scsi/isci/request.c:1399: warning: Cannot understand *
drivers/scsi/isci/request.c:1446: warning: Cannot understand *
drivers/scsi/isci/request.c:2465: warning: Function parameter or member 'task' not described in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2465: warning: Excess function parameter 'sas_task' description in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2501: warning: Function parameter or member 'task' not described in 'isci_request_set_open_reject_status'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'idev' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'task' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:3337: warning: Function parameter or member 'idev' not described in 'isci_io_request_build'
drivers/scsi/isci/request.c:3337: warning: Excess function parameter 'sci_device' description in 'isci_io_request_build'
[mkp: fix typo reported by checkpatch]
Link: https://lore.kernel.org/r/20210317091230.2912389-21-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/phy.c:354: warning: Function parameter or member 'iphy' not described in 'phy_get_non_dummy_port'
drivers/scsi/isci/phy.c:354: warning: expecting prototype for If the phy is(). Prototype was for phy_get_non_dummy_port() instead
drivers/scsi/isci/phy.c:371: warning: Function parameter or member 'iphy' not described in 'sci_phy_set_port'
drivers/scsi/isci/phy.c:371: warning: Function parameter or member 'iport' not described in 'sci_phy_set_port'
Link: https://lore.kernel.org/r/20210317091230.2912389-20-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/phy.c:354: warning: Function parameter or member 'iphy' not described in 'phy_get_non_dummy_port'
drivers/scsi/isci/phy.c:354: warning: expecting prototype for If the phy is(). Prototype was for phy_get_non_dummy_port() instead
drivers/scsi/isci/phy.c:364: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/phy.c:401: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/phy.c:611: warning: Function parameter or member 'iphy' not described in 'sci_phy_complete_link_training'
drivers/scsi/isci/phy.c:611: warning: Excess function parameter 'sci_phy' description in 'sci_phy_complete_link_training'
drivers/scsi/isci/phy.c:1170: warning: Cannot understand *
drivers/scsi/isci/phy.c:1222: warning: Cannot understand *
drivers/scsi/isci/phy.c:1432: warning: Function parameter or member 'sas_phy' not described in 'isci_phy_control'
drivers/scsi/isci/phy.c:1432: warning: Excess function parameter 'phy' description in 'isci_phy_control'
Link: https://lore.kernel.org/r/20210317091230.2912389-17-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fnic/fnic_fcs.c:308: warning: expecting prototype for Check if the Received FIP FLOGI frame is rejected(). Prototype was for is_fnic_fip_flogi_reject() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-19-lee.jones@linaro.org
Cc: Satish Kharat <satishkh@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fnic/fnic_scsi.c:183: warning: Function parameter or member 'fnic' not described in '__fnic_set_state_flags'
drivers/scsi/fnic/fnic_scsi.c:183: warning: Function parameter or member 'st_flags' not described in '__fnic_set_state_flags'
drivers/scsi/fnic/fnic_scsi.c:183: warning: Function parameter or member 'clearbits' not described in '__fnic_set_state_flags'
drivers/scsi/fnic/fnic_scsi.c:2296: warning: Function parameter or member 'fnic' not described in 'fnic_scsi_host_start_tag'
drivers/scsi/fnic/fnic_scsi.c:2296: warning: Function parameter or member 'sc' not described in 'fnic_scsi_host_start_tag'
drivers/scsi/fnic/fnic_scsi.c:2316: warning: Function parameter or member 'fnic' not described in 'fnic_scsi_host_end_tag'
drivers/scsi/fnic/fnic_scsi.c:2316: warning: Function parameter or member 'sc' not described in 'fnic_scsi_host_end_tag'
Link: https://lore.kernel.org/r/20210317091230.2912389-18-lee.jones@linaro.org
Cc: Satish Kharat <satishkh@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/be2iscsi/be_main.c:4937: warning: Function parameter or member 'data' not described in 'beiscsi_show_boot_tgt_info'
drivers/scsi/be2iscsi/be_main.c:4937: warning: Function parameter or member 'type' not described in 'beiscsi_show_boot_tgt_info'
drivers/scsi/be2iscsi/be_main.c:4937: warning: Function parameter or member 'buf' not described in 'beiscsi_show_boot_tgt_info'
Link: https://lore.kernel.org/r/20210317091230.2912389-16-lee.jones@linaro.org
Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-drivers@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pmcraid.c:4079: warning: expecting prototype for pmcraid_show_io_adapter_id(). Prototype was for pmcraid_show_adapter_id() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-14-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/myrs.c:1965: warning: Function parameter or member 'dev' not described in 'myrs_is_raid'
drivers/scsi/myrs.c:1978: warning: Function parameter or member 'dev' not described in 'myrs_get_resync'
drivers/scsi/myrs.c:2002: warning: Function parameter or member 'dev' not described in 'myrs_get_state'
Link: https://lore.kernel.org/r/20210317091230.2912389-13-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Linux GmbH <hare@suse.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/a100u2w.c:278: warning: expecting prototype for orc_exec_sb(). Prototype was for orc_exec_scb() instead
drivers/scsi/a100u2w.c:596: warning: Function parameter or member 'target' not described in 'orc_device_reset'
drivers/scsi/a100u2w.c:739: warning: Function parameter or member 'host' not described in 'orchid_abort_scb'
drivers/scsi/a100u2w.c:739: warning: Function parameter or member 'scb' not described in 'orchid_abort_scb'
drivers/scsi/a100u2w.c:915: warning: expecting prototype for inia100_queue(). Prototype was for inia100_queue_lck() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-12-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/initio.c:560: warning: Excess function parameter 'num_scbs' description in 'initio_init'
drivers/scsi/initio.c:1899: warning: expecting prototype for int_initio_scsi_resel(). Prototype was for int_initio_resel() instead
drivers/scsi/initio.c:2615: warning: expecting prototype for i91u_queuecommand(). Prototype was for i91u_queuecommand_lck() instead
drivers/scsi/initio.c:2667: warning: Function parameter or member 'dev' not described in 'i91u_biosparam'
drivers/scsi/initio.c:2667: warning: expecting prototype for i91u_biospararm(). Prototype was for i91u_biosparam() instead
drivers/scsi/initio.c:2740: warning: Function parameter or member 'host_mem' not described in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Function parameter or member 'cblk_mem' not described in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Excess function parameter 'host' description in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Excess function parameter 'cmnd' description in 'i91uSCBPost'
Link: https://lore.kernel.org/r/20210317091230.2912389-11-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Brian Macy <bmacy@sunshinecomputing.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'acb' not described in 'adapter_init'
drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'io_port_len' not described in 'adapter_init'
drivers/scsi/dc395x.c:4353: warning: Excess function parameter 'host' description in 'adapter_init'
Link: https://lore.kernel.org/r/20210317091230.2912389-10-lee.jones@linaro.org
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Ali Akcaagac <aliakc@web.de>
Cc: Jamie Lenehan <lenehan@twibble.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "C.L. Huang" <ching@tekram.com.tw>
Cc: Erich Chen <erich@tekram.com.tw>
Cc: Kurt Garloff <garloff@suse.de>
Cc: dc395x@twibble.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic94xx/aic94xx_dump.c:729: warning: expecting prototype for ads_dump_seq_state(). Prototype was for asd_dump_seq_state() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-8-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: David Chaw <david_chaw@adaptec.com>
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sd.c:1537: warning: expecting prototype for sd_ioctl(). Prototype was for sd_ioctl_common() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-7-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Drew Eckhardt <drew@colorado.edu>
Cc: Eric Youngdale <eric@andante.org>
Cc: Jirka Hanika <geo@ff.cuni.cz>
Cc: Richard Gooch <rgooch@atnf.csiro.au>
Cc: Torben Mathiasen <tmm@image.dk>
Cc: Alex Davis <letmein@erols.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: willy@debian.org
Cc: Kurt Garloff <garloff@suse.de>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pmcraid.c:455: warning: Function parameter or member 'intrs' not described in 'pmcraid_enable_interrupts'
drivers/scsi/pmcraid.c:455: warning: Excess function parameter 'intr' description in 'pmcraid_enable_interrupts'
drivers/scsi/pmcraid.c:543: warning: Function parameter or member '' not described in 'pmcraid_ioa_reset'
drivers/scsi/pmcraid.c:543: warning: expecting prototype for pmcraid_bist_done(). Prototype was for pmcraid_ioa_reset() instead
drivers/scsi/pmcraid.c:603: warning: Function parameter or member 't' not described in 'pmcraid_reset_alert_done'
drivers/scsi/pmcraid.c:603: warning: Excess function parameter 'cmd' description in 'pmcraid_reset_alert_done'
drivers/scsi/pmcraid.c:638: warning: Function parameter or member '' not described in 'pmcraid_notify_ioastate'
drivers/scsi/pmcraid.c:638: warning: Function parameter or member 'u32' not described in 'pmcraid_notify_ioastate'
drivers/scsi/pmcraid.c:638: warning: expecting prototype for pmcraid_reset_alert(). Prototype was for pmcraid_notify_ioastate() instead
drivers/scsi/pmcraid.c:687: warning: Function parameter or member 't' not described in 'pmcraid_timeout_handler'
drivers/scsi/pmcraid.c:687: warning: Excess function parameter 'cmd' description in 'pmcraid_timeout_handler'
drivers/scsi/pmcraid.c:858: warning: expecting prototype for pmcraid_fire_command(). Prototype was for _pmcraid_fire_command() instead
drivers/scsi/pmcraid.c:972: warning: Function parameter or member '' not described in 'pmcraid_querycfg'
drivers/scsi/pmcraid.c:972: warning: expecting prototype for pmcraid_get_fwversion_done(). Prototype was for pmcraid_querycfg() instead
drivers/scsi/pmcraid.c:1398: warning: Function parameter or member 'aen_msg' not described in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1398: warning: Function parameter or member 'data_size' not described in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1398: warning: Excess function parameter 'type' description in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1781: warning: Function parameter or member '' not described in 'pmcraid_initiate_reset'
drivers/scsi/pmcraid.c:1781: warning: expecting prototype for pmcraid_process_ldn(). Prototype was for pmcraid_initiate_reset() instead
drivers/scsi/pmcraid.c:1887: warning: Function parameter or member '' not described in 'pmcraid_reinit_buffers'
drivers/scsi/pmcraid.c:1887: warning: expecting prototype for pmcraid_reset_enable_ioa(). Prototype was for pmcraid_reinit_buffers() instead
drivers/scsi/pmcraid.c:2704: warning: Function parameter or member 'timeout' not described in 'pmcraid_reset_device'
drivers/scsi/pmcraid.c:3025: warning: expecting prototype for pmcraid_eh_xxxx_reset_handler(). Prototype was for pmcraid_eh_device_reset_handler() instead
drivers/scsi/pmcraid.c:3327: warning: expecting prototype for pmcraid_queuecommand(). Prototype was for pmcraid_queuecommand_lck() instead
drivers/scsi/pmcraid.c:3437: warning: Function parameter or member 'inode' not described in 'pmcraid_chr_open'
drivers/scsi/pmcraid.c:3437: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_open'
drivers/scsi/pmcraid.c:3437: warning: expecting prototype for pmcraid_open(). Prototype was for pmcraid_chr_open() instead
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'fd' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'mode' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: expecting prototype for pmcraid_fasync(). Prototype was for pmcraid_chr_fasync() instead
drivers/scsi/pmcraid.c:3574: warning: Function parameter or member 'ioctl_cmd' not described in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3574: warning: Function parameter or member 'buflen' not described in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3574: warning: Excess function parameter 'cmd' description in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'cmd' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'arg' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: expecting prototype for pmcraid_ioctl(). Prototype was for pmcraid_chr_ioctl() instead
drivers/scsi/pmcraid.c:3969: warning: cannot understand function prototype: 'const struct file_operations pmcraid_fops = '
drivers/scsi/pmcraid.c:3993: warning: Function parameter or member 'attr' not described in 'pmcraid_show_log_level'
drivers/scsi/pmcraid.c:4015: warning: Function parameter or member 'attr' not described in 'pmcraid_store_log_level'
drivers/scsi/pmcraid.c:4055: warning: Function parameter or member 'attr' not described in 'pmcraid_show_drv_version'
drivers/scsi/pmcraid.c:4081: warning: Function parameter or member 'attr' not described in 'pmcraid_show_adapter_id'
drivers/scsi/pmcraid.c:4081: warning: expecting prototype for pmcraid_show_io_adapter_id(). Prototype was for pmcraid_show_adapter_id() instead
drivers/scsi/pmcraid.c:4600: warning: Function parameter or member 'pinstance' not described in 'pmcraid_allocate_cmd_blocks'
drivers/scsi/pmcraid.c:5153: warning: Function parameter or member 'minor' not described in 'pmcraid_release_minor'
Link: https://lore.kernel.org/r/20210317091230.2912389-6-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sd_zbc.c:137: warning: wrong kernel-doc identifier on line:
Link: https://lore.kernel.org/r/20210317091230.2912389-5-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Le Moal <damien.lemoal@hgst.com>
Cc: Shaun Tancheff <shaun.tancheff@seagate.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mvumi.c:191: warning: Function parameter or member 'sg_count' not described in 'mvumi_make_sgl'
drivers/scsi/mvumi.c:1301: warning: Function parameter or member 'ob_frame' not described in 'mvumi_complete_cmd'
drivers/scsi/mvumi.c:2084: warning: Function parameter or member 'shost' not described in 'mvumi_queue_command'
drivers/scsi/mvumi.c:2084: warning: Excess function parameter 'done' description in 'mvumi_queue_command'
Link: https://lore.kernel.org/r/20210317091230.2912389-4-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Marvell <jyli@marvell.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ipr.c:5335: warning: expecting prototype for ipr_eh_dev_reset(). Prototype was for __ipr_eh_dev_reset() instead
drivers/scsi/ipr.c:5594: warning: expecting prototype for ipr_eh_abort(). Prototype was for ipr_scan_finished() instead
drivers/scsi/ipr.c:5616: warning: expecting prototype for ipr_eh_host_reset(). Prototype was for ipr_eh_abort() instead
drivers/scsi/ipr.c:6725: warning: expecting prototype for ipr_info(). Prototype was for ipr_ioa_info() instead
[mkp: tweaked ipr_scan_finished() comment]
Link: https://lore.kernel.org/r/20210317091230.2912389-3-lee.jones@linaro.org
Cc: Brian King <brking@us.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/myrb.c:91: warning: Function parameter or member 'pdev' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:91: warning: Function parameter or member 'cb' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:141: warning: Function parameter or member 'cb' not described in 'myrb_destroy_mempools'
drivers/scsi/myrb.c:153: warning: Function parameter or member 'cmd_blk' not described in 'myrb_reset_cmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cb' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cmd_blk' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cb' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cmd_blk' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'op' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'addr' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'op' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'sdev' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'pdev_info' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:341: warning: Function parameter or member 'cb' not described in 'myrb_get_errtable'
drivers/scsi/myrb.c:388: warning: Function parameter or member 'cb' not described in 'myrb_get_ldev_info'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'cb' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'rbld' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:472: warning: Function parameter or member 'cb' not described in 'myrb_update_rbld_progress'
drivers/scsi/myrb.c:533: warning: Function parameter or member 'cb' not described in 'myrb_get_cc_progress'
drivers/scsi/myrb.c:580: warning: Function parameter or member 'cb' not described in 'myrb_bgi_control'
drivers/scsi/myrb.c:671: warning: Function parameter or member 'cb' not described in 'myrb_hba_enquiry'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'cb' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'sdev' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'state' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'cb' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'mmio_init_fn' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:913: warning: Function parameter or member 'cb' not described in 'myrb_get_hba_config'
drivers/scsi/myrb.c:1200: warning: Function parameter or member 'cb' not described in 'myrb_unmap'
drivers/scsi/myrb.c:1236: warning: Function parameter or member 'cb' not described in 'myrb_cleanup'
drivers/scsi/myrb.c:2249: warning: Function parameter or member 'dev' not described in 'myrb_is_raid'
drivers/scsi/myrb.c:2260: warning: Function parameter or member 'dev' not described in 'myrb_get_resync'
drivers/scsi/myrb.c:2287: warning: Function parameter or member 'dev' not described in 'myrb_get_state'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'cb' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'error' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm0' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm1' not described in 'myrb_err_status'
Link: https://lore.kernel.org/r/20210317091230.2912389-2-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Linux GmbH <hare@suse.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/nsp32.c: In function ‘nsp32_setup_sg_table’:
drivers/scsi/nsp32.c:879:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘unsigned int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:879:52: note: format string is defined here
drivers/scsi/nsp32.c: In function ‘nsp32_detect’:
drivers/scsi/nsp32.c:2719:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:2719:22: note: format string is defined here
drivers/scsi/nsp32.c:2719:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:2719:28: note: format string is defined here
drivers/scsi/nsp32.c: In function ‘nsp32_suspend’:
drivers/scsi/nsp32.c:3267:23: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘pm_message_t’ {aka ‘struct pm_message’} [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:3267:56: note: format string is defined here
Link: https://lore.kernel.org/r/20210317091125.2910058-9-lee.jones@linaro.org
Cc: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: gotom@debian.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port.c:65:13: warning: no previous prototype for ‘port_state_name’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20210317091125.2910058-8-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_device.c:1387:6: warning: no previous prototype for ‘isci_remote_device_wait_for_resume_from_abort’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20210317091125.2910058-7-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Take the opportunity to rework the comment a little.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sim710.c: In function ‘sim710_init’:
drivers/scsi/sim710.c:216:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210317091125.2910058-6-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Richard Hirst <richard@sleepie.demon.co.uk>
Cc: c by <James.Bottomley@SteelEye.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/FlashPoint.c: In function ‘FlashPoint_AbortCCB’:
drivers/scsi/FlashPoint.c:1618:16: warning: variable ‘TID’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210317091125.2910058-5-lee.jones@linaro.org
Cc: Khalid Aziz <khalid@gonehiking.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/nsp32.c: In function ‘nsp32_selection_autoscsi’:
drivers/scsi/nsp32.c:584:17: warning: variable ‘execph’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_msgout_occur’:
drivers/scsi/nsp32.c:1785:7: warning: variable ‘new_sgtp’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_analyze_sdtr’:
drivers/scsi/nsp32.c:2227:20: warning: variable ‘syncnum’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c:2223:20: warning: variable ‘synct’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_do_bus_reset’:
drivers/scsi/nsp32.c:2841:17: warning: variable ‘intrdat’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_getprom_param’:
drivers/scsi/nsp32.c:2912:11: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210317091125.2910058-4-lee.jones@linaro.org
Cc: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: gotom@debian.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/nsp32.c: In function ‘nsp32_message’:
drivers/scsi/nsp32.c:318:2: warning: function ‘nsp32_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Link: https://lore.kernel.org/r/20210317091125.2910058-3-lee.jones@linaro.org
Cc: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: gotom@debian.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/BusLogic.c:51:
drivers/scsi/BusLogic.c: In function ‘blogic_msg’:
drivers/scsi/BusLogic.c:3591:2: warning: function ‘blogic_msg’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Link: https://lore.kernel.org/r/20210317091125.2910058-2-lee.jones@linaro.org
Cc: Khalid Aziz <khalid@gonehiking.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All sbitmap code uses implied preemption protection to update
sb->alloc_hint except sbitmap_put(). Using implied preemption protection is
safe since the value of sb->alloc_hint only affects performance of sbitmap
allocations but not their correctness. Change this_cpu_ptr() in
sbitmap_put() into raw_cpu_ptr() to suppress the following kernel warning
that appears with preemption debugging enabled (CONFIG_DEBUG_PREEMPT):
BUG: using smp_processor_id() in preemptible [00000000] code: scsi_eh_0/152
caller is debug_smp_processor_id+0x17/0x20
CPU: 1 PID: 152 Comm: scsi_eh_0 Tainted: G W 5.12.0-rc1-dbg+ #6
Call Trace:
show_stack+0x52/0x58
dump_stack+0xaf/0xf3
check_preemption_disabled+0xce/0xd0
debug_smp_processor_id+0x17/0x20
scsi_device_unbusy+0x13a/0x1c0 [scsi_mod]
scsi_finish_command+0x4d/0x290 [scsi_mod]
scsi_eh_flush_done_q+0x1e7/0x280 [scsi_mod]
ata_scsi_port_error_handler+0x592/0x750 [libata]
ata_scsi_error+0x1a0/0x1f0 [libata]
scsi_error_handler+0x19e/0x330 [scsi_mod]
kthread+0x222/0x250
ret_from_fork+0x1f/0x30
Link: https://lore.kernel.org/r/20210317032648.9080-1-bvanassche@acm.org
Fixes: c548e62bcf ("scsi: sbitmap: Move allocation hint into sbitmap")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix warning:
drivers/target/target_core_transport.c:1661: WARNING: Block quote ends
without a blank line; unexpected unindent.
Link: https://lore.kernel.org/r/20210318225858.11863-1-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are similar code implementations for WB configuration in
ufshcd_wb_{ctrl, toggle_flush_during_h8, toggle_flush}. Extract the common
parts to create a new helper with a flag parameter to reduce code
duplication.
Meanwhile, rename ufshcd_wb_ctrl() to ufshcd_wb_toggle() for better
readability. And remove unnecessary log messages from ufshcd_wb_config()
since relevant toggle function will emit messages. Also change
ufshcd_wb_toggle_flush{__during_h8} to void type accordingly.
Link: https://lore.kernel.org/r/20210318095536.2048-1-zbestahu@gmail.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rudimentary typo fixes throughout the fnic_trace.c file.
Link: https://lore.kernel.org/r/20210317092240.927822-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/csiostor/csio_scsi.c:150:9-10: WARNING: return of 0/1 in
function 'csio_scsi_itnexus_loss_error' with return type bool.
Link: https://lore.kernel.org/r/1615282668-36935-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
./drivers/scsi/3w-sas.c:866:5-11: Unneeded variable: "retval". Return "1"
on line 898
Link: https://lore.kernel.org/r/1615272064-42109-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/mvumi.c:69:9-10: WARNING: return of 0/1 in function
'tag_is_empty' with return type bool.
Link: https://lore.kernel.org/r/1613643371-122635-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply post array buffers can not cross
a 4 GB boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply post buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, reply buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, sense buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, chain buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dynamic memory allocation isn't actually needed and it can be replaced by
statically allocating memory for struct object io_unit_pg3 with 36
hardcoded entries for its GPIOVal array.
Also, this helps the with ongoing efforts to enable -Warray-bounds by
fixing the following warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/
Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
