A CI system might want to run all tests in verbose mode so that there is
enough information to diagnose issues. This LLVM test is the only test
that uses "-v" to signify to not skip the test if the preconditions
aren't met (LLVM isn't installed). This means that running the test in
verbose mode without LLVM installed causes a test failure.
For consistency with the other tests, remove this verbose/skip check. An
alternate solution would be to make _all_ tests not skip when run in
verbose mode, but I don't think that would be intuitive.
Also change the search_program() call to search_program_and_warn().
Previously the hint about installing LLVM was only printed by the actual
test because this check was skipped in verbose mode. To maintain the old
behaviour, the precondition check must also print the full warning.
Previous output:
$ ./perf test llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Skip
$ ./perf test -v llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 2085835
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF. Check your $PATH
...
test child finished with -1
---- end ----
LLVM search and compile subtest 1: FAILED!
New output (non verbose mode is identical, verbose changes from fail to
skip):
$ ./perf test llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Skip
$ ./perf test -v llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 2087680
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF. Check your $PATH
...
No clang, skip this test
test child finished with -2
---- end ----
LLVM search and compile subtest 1: Skip
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210831145501.2135754-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The same warning is duplicated in two places so refactor it into a
single function "search_program_and_warn". This will be used a third
time in a later commit.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210831145501.2135754-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the tool runs with compat mode on Arm platform, the kernel is in
64-bit mode and user space is in 32-bit mode; the user space can use
instructions "ldrd" and "strd" for 64-bit value atomicity.
This patch adds compat_auxtrace_mmap__{read_head|write_tail} for arm
building, it uses "ldrd" and "strd" instructions to ensure accessing
atomicity for aux head and tail. The file arch/arm/util/auxtrace.c is
built for arm and arm64 building, these two functions are not needed for
arm64, so check the compiler macro "__arm__" to only include them for
arm building.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Russell King (oracle)" <linux@armlinux.org.uk>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210829102238.19693-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf runs in compat mode (kernel in 64-bit mode and the perf is in
32-bit mode), the 64-bit value atomicity in the user space cannot be
assured, E.g. on some architectures, the 64-bit value accessing is split
into two instructions, one is for the low 32-bit word accessing and
another is for the high 32-bit word.
This patch introduces weak functions compat_auxtrace_mmap__read_head()
and compat_auxtrace_mmap__write_tail(), as their naming indicates, when
perf tool works in compat mode, it uses these two functions to access
the AUX head and tail. These two functions can allow the perf tool to
work properly in certain conditions, e.g. when perf tool works in
snapshot mode with only using AUX head pointer, or perf tool uses the
AUX buffer and the incremented tail is not bigger than 4GB.
When perf tool cannot handle the case when the AUX tail is bigger than
4GB, the function compat_auxtrace_mmap__write_tail() returns -1 and
tells the caller to bail out for the error.
These two functions are declared as weak attribute, this allows to
implement arch specific functions if any arch can support the 64-bit
value atomicity in compat mode.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Russell King (oracle)" <linux@armlinux.org.uk>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210829102238.19693-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BTF needs to be freed with btf__free().
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210826184833.408563-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is currently only 1 'perf data' command, but supporting extra
commands was breaking the help output. Simplify for now so that the help
output is correct.
Before:
$ perf data -h
Usage: perf data [<common options>] <command> [<options>]
$ perf data
Usage:
perf data [<common options>] <command> [<options>]
Available commands:
convert - converts data file between formats
After:
$ perf data
Usage: perf data convert [<options>]
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose
--all Convert all events
--to-ctf ... Convert to CTF format
--to-json ... Convert to JSON format
--tod Convert time to wall clock time
$ perf data -h
Usage: perf data convert [<options>]
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose
--all Convert all events
--to-ctf ... Convert to CTF format
--to-json ... Convert to JSON format
--tod Convert time to wall clock time
Signed-off-by: Joshua Martinez <joshuamart@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210826121801.13281-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Such as cross building on Android, so just add EXTRA_CFLAGS to the
dlfilters rules as it is where --sysroot= has been specified.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YS1JwIMTNNWcbGdT@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
DEBUG_PI_LIST was renamed to DEBUG_PLIST since
8e18faeac3 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
- It's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
CC: "Rafael J. Wysocki" <rjw@rjwysocki.net>
CC: Viresh Kumar <viresh.kumar@linaro.org>
CC: linux-pm@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
SYNC was removed since
aff9da10e2 ("staging/android: make sync_timeline internal to sw_sync")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_SYNC= of sync/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
* tip/sched/arm64: (785 commits)
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system
arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0
arm64: Implement task_cpu_possible_mask()
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
Linux 5.14-rc6
lib: use PFN_PHYS() in devmem_is_allowed()
...
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* display perf.data header
* display PIDs of user stacks
* added option to change color scheme
* default to blue/green color scheme to improve accessibility
* correctly identify kernel stacks when kernel-debuginfo is installed
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210830164729.116049-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane found that the name of the forked process in a system-wide
mode is wrong when --delay option is used. For example,
# perf record -a --delay=1000 noploop 3
The noploop process will run a busy loop for 3 second. And on an idle
machine it should show up at the top in the perf report. It works
well without the --delay option. But if I add the option, it showed
'perf' not 'noploop'.
# perf report -s comm -q | head -3
52.94% perf
16.65% swapper
12.04% chrome
It turned out that the dummy event didn't work at all and it missed
COMM and MMAP events for the noploop process (and others too). We
should enable the dummy event immediately in system-wide mode, as the
enable-on-exec would work only for task events.
With this change,
# perf report -s comm -q | head -3
52.75% noploop
17.03% swapper
12.83% chrome
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210827233212.3121037-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cgroup mode should work with cpu events. Warn if --for-each-cgroup
option is used with a task target like existing -G option.
# perf stat --for-each-cgroup . sleep 1
both cgroup and no-aggregation modes only available in system-wide mode
Usage: perf stat [<options>] [<command>]
-G, --cgroup <name> monitor event in cgroup name only
-A, --no-aggr disable CPU count aggregation
-a, --all-cpus system-wide collection from all CPUs
--for-each-cgroup <name>
expand events for each cgroup
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210830170200.55652-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
73 9.00 ubuntu:18.04-x-powerpc : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
bench/evlist-open-close.c: In function 'bench_evlist_open_close__run':
bench/evlist-open-close.c:173:12: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'u64 {aka long long unsigned int}' [-Werror=format=]
pr_debug("Iteration %d took:\t%ldus\n", i, runtime_us);
^
bench/../util/debug.h:18:21: note: in definition of macro 'pr_fmt'
#define pr_fmt(fmt) fmt
^~~
bench/evlist-open-close.c:173:3: note: in expansion of macro 'pr_debug'
pr_debug("Iteration %d took:\t%ldus\n", i, runtime_us);
^~~~~~~~
cc1: all warnings being treated as errors
/git/perf-5.14.0/tools/build/Makefile.build:139: recipe for target 'bench' failed
Cc: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 4241eabf59 ("perf bench: Add benchmark for evlist open/close operations")
Link: http://lore.kernel.org/lkml/YS0oTcA9Zuy8Wjm9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU updates from Paul McKenney:
"RCU changes for this cycle were:
- Documentation updates
- Miscellaneous fixes
- Offloaded-callbacks updates
- Updates to the nolibc library
- Tasks-RCU updates
- In-kernel torture-test updates
- Torture-test scripting, perhaps most notably the pinning of
torture-test guest OSes so as to force differences in memory
latency. For example, in a two-socket system, a four-CPU guest OS
will have one pair of its CPUs pinned to threads in a single core
on one socket and the other pair pinned to threads in a single core
on the other socket. This approach proved able to force race
conditions that earlier testing missed. Some of these race
conditions are still being tracked down"
* 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
torture: Replace deprecated CPU-hotplug functions.
rcu: Replace deprecated CPU-hotplug functions
rcu: Print human-readable message for schedule() in RCU reader
rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU
rcu: Use per_cpu_ptr to get the pointer of per_cpu variable
rcu: Remove useless "ret" update in rcu_gp_fqs_loop()
rcu: Mark accesses in tree_stall.h
rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack
rcu: Mark lockless ->qsmask read in rcu_check_boost_fail()
srcutiny: Mark read-side data races
rcu: Start timing stall repetitions after warning complete
rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()
rcu/tree: Handle VM stoppage in stall detection
rculist: Unify documentation about missing list_empty_rcu()
rcu: Mark accesses to ->rcu_read_lock_nesting
rcu: Weaken ->dynticks accesses and updates
rcu: Remove special bit at the bottom of the ->dynticks counter
rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
rcu: Fix to include first blocked task in stall warning
torture: Make kvm-test-1-run-qemu.sh check for reboot loops
...
The commit 4d6101f5fd ("perf probe: Clarify error message about
not finding kernel modules debuginfo") changed the error message "Failed
to find the path for kernel" to "Failed to find the path for the
kernel".
Update the regex so that the tests still skip rather than fail when
kernel debug symbols aren't present.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20210825164259.833222-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The build on fedora:35 and fedora:rawhide with clang is failing with:
49 41.00 fedora:35 : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35)
bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable]
u64 len = 0;
^
1 error generated.
make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2
50 41.11 fedora:rawhide : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35)
bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable]
u64 len = 0;
^
1 error generated.
make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2
That 'len' variable is not used at all, so just make sure all the
synthesize_RECORD() routines return ssize_t to propagate the writen()
return, as it may fail, ditch the 'ret' var and bail out if those
routines fail.
Fixes: 0bf02a0d80 ("perf bench: Add build-id injection benchmark")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/CAM9d7cgEZNSor+B+7Y2C+QYGme_v5aH0Zn0RLfxoQ+Fy83EHrg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acaict, perf_home_perfconfig() is supposed to cache the result of
home_perfconfig, which returns the default location of perfconfig for
the user, given the HOME environment variable.
However, the current implementation calls home_perfconfig every time
perf_home_perfconfig() is called (so no caching is actually performed),
replacing the previous pointer, thus also causing a memory leak.
This patch adds a check of whether either config or failed is set and,
in that case, directly returns config without calling home_perfconfig at
each invocation.
Fixes: f5f03e19ce ("perf config: Add perf_home_perfconfig function")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: http://lore.kernel.org/lkml/20210820130817.740536-1-rickyman7@gmail.com
[ Removed needless double check for the 'failed' variable ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strdup() prototype doesn't live in stdlib.h .
Add limits.h for PATH_MAX definition as well.
This fixes the build on Android.
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YRukaQbrgDWhiwGr@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:
(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.
Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.
After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.
In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch adds similar retry logic to more places where read() is used, to
reduce flakyness in slow CI environment.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825184745.2680830-1-fallentree@fb.com
Transactional Memory was removed from the architecture in ISA v3.1. For
threads running in P8/P9 compatibility mode on P10 a synthetic TM
implementation is provided. In this implementation, tbegin. always sets
cr0 eq meaning the abort handler is always called. This is not an issue
as users of TM are expected to have a fallback non transactional way to
make forward progress in the abort handler. The TEXASR indicates if a
transaction failure is due to a synthetic implementation.
Some of the TM self tests need a non-degenerate TM implementation for
their testing to be meaningful so check for a synthetic implementation
and skip the test if so.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729041317.366612-2-jniethe5@gmail.com
ISA v3.1 removes TM but includes a synthetic implementation for
backwards compatibility. With this implementation, the tests
ptrace-tm-spd-gpr and ptrace-tm-gpr should never be able to make any
forward progress and eventually should be killed by the timeout.
Instead on a P10 running in P9 mode, ptrace_tm_gpr fails like so:
test: ptrace_tm_gpr
tags: git_version:unknown
Starting the child
...
...
GPR[27]: 1 Expected: 2
GPR[28]: 1 Expected: 2
GPR[29]: 1 Expected: 2
GPR[30]: 1 Expected: 2
GPR[31]: 1 Expected: 2
[FAIL] Test FAILED on line 98
failure: ptrace_tm_gpr
selftests: ptrace-tm-gpr [FAIL]
The problem is in the inline assembly of the child. r0 is loaded with a
value in the child's transaction abort handler but this register is not
included in the clobbers list. This means it is possible that this
statement:
cptr[1] = 0;
which is meant to signal the parent to wait may actually use the value
placed into r0 by the inline assembly incorrectly signal the parent to
continue.
By inspection the same problem is present in ptrace-tm-spd-gpr.
Adding r0 to the clobbbers list makes the test fail correctly via a
timeout on a P10 running in P8/P9 compatibility mode.
Suggested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729041317.366612-1-jniethe5@gmail.com
This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.
By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.
No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.
Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.
Additionally, enable veth-based tests by default.
v1 -> v2:
- drop unused code in setup_veth_ns() - Willem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes the bpf_dctcp test to fallback to cubic by
using setsockopt(TCP_CONGESTION) when the tcp flow is not
ecn ready.
It also checks setsockopt() is not available to release().
The settimeo() from the network_helpers.h is used, so the local
one is removed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173026.3979130-1-kafai@fb.com
The next test requires to setsockopt(TCP_CONGESTION) before
connect(), so a new arg is needed for the connect_to_fd() to specify
the cc's name.
This patch adds a new "struct network_helper_opts" for the future
option needs. It starts with the "cc" and "timeout_ms" option.
A new helper connect_to_fd_opts() is added to take the new
"const struct network_helper_opts *opts" as an arg.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173019.3977910-1-kafai@fb.com
Add sk_state define to bpf_tcp_helpers.h. Rename the existing
global variable "sk_state" in the kfunc_call test to "sk_state_res".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173013.3977316-1-kafai@fb.com
A glibc 2.34 feature adds support for variable MINSIGSTKSZ and SIGSTKSZ.
When _DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ
and SIGSTKSZ are no longer constant on Linux. glibc 2.34 flags code paths
assuming MINSIGSTKSZ or SIGSTKSZ are constant. Fix these error in x86 test.
Feature description and build error:
NEWS for version 2.34
=====================
Major new features:
* Add _SC_MINSIGSTKSZ and _SC_SIGSTKSZ. When _DYNAMIC_STACK_SIZE_SOURCE
or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ are no longer
constant on Linux. MINSIGSTKSZ is redefined to sysconf(_SC_MINSIGSTKSZ)
and SIGSTKSZ is redefined to sysconf (_SC_SIGSTKSZ). This supports
dynamic sized register sets for modern architectural features like
Arm SVE.
=====================
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as:
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
Build error with the GNU C Library 2.34:
DEBUG: | sigreturn.c:150:13: error: variably modified 'altstack_data' at file scope
| sigreturn.c:150:13: error: variably modified 'altstack_data' at file scope
DEBUG: | 150 | static char altstack_data[SIGSTKSZ];
| 150 | static char altstack_data[SIGSTKSZ];
DEBUG: | | ^~~~~~~~~~~~~
DEBUG: | single_step_syscall.c:60:22: error: variably modified 'altstack_data' at file scope
DEBUG: | 60 | static unsigned char altstack_data[SIGSTKSZ];
DEBUG: | | ^~~~~~~~~~~~~
Fixed commit log to improve formatting and clarity:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://sourceware.org/pipermail/libc-alpha/2021-January/121996.html
Link: https://sourceware.org/pipermail/libc-alpha/2021-August/129718.html
Suggested-by: Jianwei Hu <jianwei.hu@windriver.com>
Signed-off-by: Jun Miao <jun.miao@windriver.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Clean up the following includecheck warning:
./tools/testing/selftests/sched/cs_prctl_test.c:
Include files sys/types.h and sys/wait.h are included more than
once.
No functional change.
Fixed commit header and log:
Shuah Khan <skhan@linuxfoundation.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The openat2 test suite fails on ARM64 because the definition of
O_LARGEFILE is different on ARM64. Fix the problem by defining
the correct O_LARGEFILE definition on ARM64.
"openat2 unexpectedly returned # 3['.../tools/testing/selftests/openat2']
with 208000 (!= 208000)
not ok 102 openat2 with incompatible flags (O_PATH | O_LARGEFILE) fails
with -22 (Invalid argument)"
Fixed change log to improve formatting and clarity:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Generate packets from a specification instead of something hard
coded. The idea is that a test generates one or more packet
specifications and provides it/them to both Tx and Rx. The Tx thread
will generate from this specification and Rx will validate that it
receives what is in the specification. The specification can be the
same on both ends, meaning that everything that was sent should be
received, or different which means that Rx will only receive part of
the sent packets.
Currently, the packet specification is the same for both Rx and Tx and
the same for each test. This will change in later work as features
and tests are added.
The data path functions are also renamed to better reflect what
actions they are performing after introducing this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-15-magnus.karlsson@gmail.com
Generate the packet directly in the umem instead of in a temporary
buffer that is copied out. Simplifies the code and improves
performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-14-magnus.karlsson@gmail.com
Simpify the cleanup of ifobjects right before the program exits by
introducing functions for creating and destroying these objects.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-13-magnus.karlsson@gmail.com
Decrease sending speed to avoid potentially overflowing some buffers
in the skb case that leads to dropped packets we cannot control (and
thus the tests may generate false negatives). Decrease batch size and
introduce a usleep in the transmit thread to not overflow the
receiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-12-magnus.karlsson@gmail.com
Validate the tx stats on the Tx thread instead of the Rx
thread. Depending on your settings, you might not be allowed to query
the statistics of a socket you do not own, so better to do this on the
correct thread to start with.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-11-magnus.karlsson@gmail.com
Simplify packet validation in the xsk selftests by performing it at
once for every packet. The current code performed this per batch and
did this on copied packet data. Make it simpler and faster by
validating it at once and on the umem packet data thus skipping the
copy and the memory allocation for the temprary buffer.
The optional packet dump feature is also simplified in the same
manner. Memory allocation and copying is removed and the dump is
performed directly on the umem data.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-10-magnus.karlsson@gmail.com
Rename worker_* functions that are not thread entry points to
something else. This was confusing. Now only thread entry points are
worker_something.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-9-magnus.karlsson@gmail.com
Disassociate the number of packets sent with the number of buffers in
the umem. This so we can loop over the umem to test more things. Set
the size of the umem to be a multiple of 2M. A requirement for huge
pages that are needed in unaligned mode.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-8-magnus.karlsson@gmail.com
Get rid of the end-of-test packet and just count the number of packets
received and quit when the expected number as been
received. Simplifies the code.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-7-magnus.karlsson@gmail.com
Simplify the retry code and make it more efficient by waiting first,
instead of trying immediately which always fails due to the
asynchronous nature of xsk socket close. Also decrease the wait time
to significantly lower the run-time of the test suite.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-6-magnus.karlsson@gmail.com
Remove the number of tx packet option as this should be decided by the
test itself. Also change the number of packets to be sent to 4096
speeding up the execution.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-3-magnus.karlsson@gmail.com
Remove color mode since it does not add any value and having less code
means less maintenance which is a good thing.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-2-magnus.karlsson@gmail.com
The motivation behind this helper is to access userspace pt_regs in a
kprobe handler.
uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace
pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a
kprobe handler. The final case (kernelspace pt_regs in uprobe) is
pretty rare (usermode helper) so I think that can be solved later if
necessary.
More concretely, this helper is useful in doing BPF-based DWARF stack
unwinding. Currently the kernel can only do framepointer based stack
unwinds for userspace code. This is because the DWARF state machines are
too fragile to be computed in kernelspace [0]. The idea behind
DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace
stack (while in prog context) and send it up to userspace for unwinding
(probably with libunwind) [1]. This would effectively enable profiling
applications with -fomit-frame-pointer using kprobes and uprobes.
[0]: https://lkml.org/lkml/2012/2/10/356
[1]: https://github.com/danobi/bpf-dwarf-walk
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
This patch added a function chk_fail_nr to check the mibs for MP_FAIL.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several test cases in the net directory are still using
exit 0 or exit 1 when they need to be skipped. Use kselftest
framework skip code instead so it can help us to distinguish the
return status.
Criterion to filter out what should be fixed in net directory:
grep -r "exit [01]" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20210823085854.40216-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
orig_nents should represent the number of entries with pages,
but __sg_alloc_table_from_pages sets orig_nents as the number of
total entries in the table. This is wrong when the API is used for
dynamic allocation where not all the table entries are mapped with
pages. It wasn't observed until now, since RDMA umem who uses this
API in the dynamic form doesn't use orig_nents implicit or explicit
by the scatterlist APIs.
Fix it by changing the append API to track the SG append table
state and have an API to free the append table according to the
total number of entries in the table.
Now all APIs set orig_nents as number of enries with pages.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20210824142531.3877007-3-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of copying the whole header in, just add the struct definitions
we need for now. In the future it can be synced as a copy of in-tree
header if required.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-3-memxor@gmail.com
This would happend when we run the tests after install kselftests
root@lkp-skl-d01 ~# /kselftests/run_kselftest.sh -t bpf:test_doc_build.sh
TAP version 13
1..1
# selftests: bpf: test_doc_build.sh
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_ADDRESS = "en_US.UTF-8",
LC_NAME = "en_US.UTF-8",
LC_MONETARY = "en_US.UTF-8",
LC_PAPER = "en_US.UTF-8",
LC_IDENTIFICATION = "en_US.UTF-8",
LC_TELEPHONE = "en_US.UTF-8",
LC_MEASUREMENT = "en_US.UTF-8",
LC_TIME = "en_US.UTF-8",
LC_NUMERIC = "en_US.UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
# skip: bpftool files not found!
#
ok 1 selftests: bpf: test_doc_build.sh # SKIP
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820025549.28325-1-lizhijian@cn.fujitsu.com
test_bpftool.sh relies on bpftool and test_bpftool.py.
'make install' will install bpftool to INSTALL_PATH/bpf/bpftool, and
export it to PATH so that it can be used after installing.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820015556.23276-5-lizhijian@cn.fujitsu.com
Previously, it fails as below:
-------------
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf# ./test_doc_build.sh
++ realpath --relative-to=/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf ./test_doc_build.sh
+ SCRIPT_REL_PATH=test_doc_build.sh
++ dirname test_doc_build.sh
+ SCRIPT_REL_DIR=.
++ realpath /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/./../../../../
+ KDIR_ROOT_DIR=/opt/rootfs/v5.14-rc4
+ cd /opt/rootfs/v5.14-rc4
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs
make: *** No rule to make target 'docs'. Stop.
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs-clean
make: *** No rule to make target 'docs-clean'. Stop.
-----------
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-3-lizhijian@cn.fujitsu.com
0Day robot observed that it's easily timeout on a heavy load host.
-------------------
# selftests: bpf: test_maps
# Fork 1024 tasks to 'test_update_delete'
# Fork 1024 tasks to 'test_update_delete'
# Fork 100 tasks to 'test_hashmap'
# Fork 100 tasks to 'test_hashmap_percpu'
# Fork 100 tasks to 'test_hashmap_sizes'
# Fork 100 tasks to 'test_hashmap_walk'
# Fork 100 tasks to 'test_arraymap'
# Fork 100 tasks to 'test_arraymap_percpu'
# Failed sockmap unexpected timeout
not ok 3 selftests: bpf: test_maps # exit=1
# selftests: bpf: test_lru_map
# nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.
In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
RDMA is the only in-kernel user that uses __sg_alloc_table_from_pages to
append pages dynamically. In the next patch. That mode will be extended
and that function will get more parameters. So separate it into a unique
function to make such change more clear.
Link: https://lore.kernel.org/r/20210824142531.3877007-2-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
libperf's verbose printing checks the -v option every time the macro _T_ START
is called.
Since there are currently four libperf tests registered, the macro _T_ START is
called four times, but verbose printing after the second time is not output.
Resets the index of the element processed by getopt() and fix verbose printing
so that it prints in all tests.
Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210820093908.734503-3-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing newline at the end of file parse-sublevel-options.h.
Thus removing relevant warning reported by checkpatch.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http //lore.kernel.org/lkml/20210824085947.224062-1-nghialm78@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch added an extra test for the singal_address_tests() to do the
ADD_ADDR and ADD_ADDR_ECHO race test.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends wait time in timer_mim. As observed in slow CI environment,
it is possible to have interrupt/preemption long enough to cause the test to
fail, almost 1 failure in 5 runs.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210823213629.3519641-1-fallentree@fb.com
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.
Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.
As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.
bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.
To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
Currently this doesn't actually verify that the register contents do the
right thing, it just verifes that a SVE context with appropriate size
appears.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We do not support changing the SVE vector length as part of signal return,
verify that this is the case if the system supports multiple vector lengths.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As a basic check that the SVE signal frame is being set up correctly
verify that the vector length in the signal frame is the vector length
that the process has.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A signal frame with SVE may validly either be a bare struct sve_context or
a struct sve_context followed by vector length dependent register data.
Support either in the generic helpers for the signal tests, and while we're
at it validate the SVE vector length reported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Allow testcases for SVE signal handling to flag the dependency and be
skipped on systems without SVE support.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a test to test event probes, by creating a synthetic event across
sys_enter_openat and sys_exit_openat that passes the filename pointer from
the enter of the system call to the exit, and then add an event probe to
the synthetic event to make sure that the file name is seen.
Link: https://lore.kernel.org/linux-kselftest/20210819152825.526931866@goodmis.org/
Link: https://lkml.kernel.org/r/20210820204742.463259900@goodmis.org
Cc: "Tzvetomir Stoyanov" <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The selftest for ftrace checks some features by checking if the README has
text that states the feature is supported by that kernel. Unfortunately,
this check gives false positives because it many not be checked if there's
spaces in the string to check. This is due to the compare between the
required variable with the ":README" string stripped, because neither has
quotes around them.
Link: https://lkml.kernel.org/r/20210820204742.087177341@goodmis.org
Cc: "Tzvetomir Stoyanov" <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 1b8eec510b ("selftests/ftrace: Support ":README" suffix for requires")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Modify debug_regs test to create a pending interrupt
and see that it is blocked when single stepping is done
with KVM_GUESTDBG_BLOCKIRQ
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bucket_size field should be non-zero for linear histogram stats and
should be zero for other stats types.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-4-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a function to remove all dynamic events from the tracing directory. It
requires a loop as some of the dynamic events may depend on others being
removed first. Also add a safety that prevents it from looping infinitely
due to a bug where an event never gets removed.
Link: https://lkml.kernel.org/r/20210819152825.348941368@goodmis.org
Cc: "Tzvetomir Stoyanov" <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In dlfilter-test.c, check_filter_desc() calls get_filter_desc() which
allocates 'desc' and 'long_desc'. However, these variables are never
deallocated.
This patch adds the missing free() calls.
Fixes: 9f9c9a8de2 ("perf tests: Add dlfilter test")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210820113132.724034-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This silences the following coccinelle warning:
"WARNING: sum of probable bitmasks, consider |"
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PAC tests check to see if the system supports the relevant PAC features
but instead of skipping the tests if they can't be executed they fail the
tests which makes things look like they're not working when they are.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819165723.43903-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When skipping the tests due to a lack of system support for MTE we
currently print a message saying FAIL which makes it look like the test
failed even though the test did actually report KSFT_SKIP, creating some
confusion. Change the error message to say SKIP instead so things are
clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819172902.56211-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Adding selftests for the newly added functionality to call bpf_setsockopt()
and bpf_getsockopt() from setsockopt BPF programs.
Test Details:
1. BPF Program
Checks for changes in IPV6_TCLASS(SOL_IPV6) via setsockopt
If the cca for the socket is not cubic do nothing
If the newly set value for IPV6_TCLASS is 45 (0x2d) (as per our use-case)
then change the cc from cubic to reno
2. User Space Program
Creates an AF_INET6 socket and set the cca for that to be "cubic"
Attach the program and set the IPV6_TCLASS to 0x2d using setsockopt
Verify the cca for the socket changed to reno
Signed-off-by: Prankur Gupta <prankgup@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210817224221.3257826-3-prankgup@fb.com
mac80211 trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path barriers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEepAYACgkQMUZtbf5S
IrugdhAAo6/T9A8MmxU711gwq9BKcubOr2BQC0GYGjhM6Pnhign44kDGdBbl1fmL
lt4LTgOwIKZ4bpLYJuwXnq0KpwWG8YKpgdgjvXsc0jXYtDHJvFjzL42vjGGGvAc4
rwIe784dNt3LYppEsADAad2ZdQO25tB+jhQO8MttipNGq8Qvkjib2ttvmLri/hEl
hKRHnyQMEZCXbMV4zn+ILjlqLxZ5a2ZPk97qGL9fAafi1O3cjfv5ZDwvOjM3TGE3
DPLdEvYFRDTECGJO3QOK7SzC1NoQA49Bj1hqwbWRUi9tm8A0lPXEUjNleCbC2i7n
qi6JBexmme6ZiimJJPeKacn8BcgorPDWm6friL9jiWpndvrWycBmqw5LurgdLVHC
nFHjnbji885P6DBZLx8tDbTSXGSpcLoHuv7M3aQbD2DZqQKk/9irKaJMUZ6XwOYm
EXM6oqQ13vaSjFH1GOsK0wx/XjcL5t42uRAtG9INlYusaU+ZvFu12TzEt1+PcWpO
nF7VUQWQatcidSYdYolciw383siKRiSV1F8d6IEon907GHVrod9ty+yii33CamBf
/aUyFULMEf/vaXjmJzhzWABV9vu3QVWd0IxL9oqbbRqNTwFr86hnnRhntqUCje/c
vY0VFWQ4CuaTvohKl0I+IhyvUPLUp1iTD51qSbOSKybG6IZ77+U=
=ofv+
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
This patch copies sparse context/locking annotations from
include/compiler-types.h to tools/include/compiler-types.h.
Committer notes:
This will be used in the upcoming workqueue patchset.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http //lore.kernel.org/lkml/58b2f161ce856ec8b499f4dcf60a10adc84651e0.1627657061.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a test for aarch64 that ensures CPU resets induced by PSCI are
reflected in the target vCPU's state, even if the target is never run
again. This is a regression test for a race between vCPU migration and
PSCI.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818202133.1106786-5-oupton@google.com
Add test to use get_netns_cookie() from BPF_PROG_TYPE_SOCK_OPS.
Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210818105820.91894-3-liuxu623@gmail.com
The FORTIFY_SOURCE tests were split between bugs.c and fortify.c. Move
tests into fortify.c, standardize their naming, add CONFIG hints, and
add them to the lkdtm selftests.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818174855.2307828-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CONFIG hints about why the ARRAY_BOUNDS test might fail, and
similarly include the CONFIGs needed to pass the ARRAY_BOUNDS test via
the selftests, and add to selftests.
Cc: kernelci@groups.io
Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818174855.2307828-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 09e856d54b ("vrf: Reset skb conntrack connection on VRF rcv")
fixes the "reverse-DNAT" of an SNAT-ed packet over a VRF.
This patch adds a test for this scenario.
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the NCI testcase reading T4T Tag that has NFC TEST in plain text.
the virtual device application acts as T4T Tag in this testcase.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reuse the start/stop discovery code in other testcase, extract the code.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reuse the send_cmd_mt_nla for NLM_F_REQUEST and NLM_F_DUMP flag,
add the flags parameter to the function.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
memcpy should be executed only in case nla_len's value is greater than 0.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nlattr could have a padding for 4 bytes alignment. So next nla's offset
should be calculated with a padding.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because the virtual NCI device uses Wait Queue, the virtual device
application doesn't need to poll the NCI frame.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The removing addresses testcases can only deal with the continuous ids.
This patch added the uncontinuous removing ids support.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the testcases for the fullmesh address flag of the path
manager.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch dealt with the MPTCP_PM_ADDR_FLAG_FULLMESH flag in add_addr()
and print_addr(), to set and print out the fullmesh flag.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull LKMM changes from Paul E. McKenney:
"These changes focus on documentation, providing additional
examples and use cases."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
libbpf CI has reported send_signal test is flaky although
I am not able to reproduce it in my local environment.
But I am able to reproduce with on-demand libbpf CI ([1]).
Through code analysis, the following is possible reason.
The failed subtest runs bpf program in softirq environment.
Since bpf_send_signal() only sends to a fork of "test_progs"
process. If the underlying current task is
not "test_progs", bpf_send_signal() will not be triggered
and the subtest will fail.
To reduce the chances where the underlying process is not
the intended one, this patch boosted scheduling priority to
-20 (highest allowed by setpriority() call). And I did
10 runs with on-demand libbpf CI with this patch and I
didn't observe any failures.
[1] https://github.com/libbpf/libbpf/actions/workflows/ondemand.yml
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817190923.3186725-1-yhs@fb.com
Replace CHECK in send_signal.c with ASSERT_* macros as
ASSERT_* macros are generally preferred. There is no
funcitonality change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817190918.3186400-1-yhs@fb.com
This patch adds '-a' and '-d' arguments supporting both exact string match as
well as using '*' wildcard in test/subtests selection. '-a' and '-t' can
co-exists, same as '-d' and '-b', in which case they just add to the list of
allowed or denied test selectors.
Caveat: Same as the current substring matching mechanism, test and subtest
selector applies independently, 'a*/b*' will execute all tests matching "a*",
and with subtest name matching "b*", but tests matching "a*" that has no
subtests will also be executed.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-5-fallentree@fb.com
This patch add test name in subtest status message line, making it possible to
grep ':OK' in the output to generate a list of passed test+subtest names, which
can be processed to generate argument list to be used with "-a", "-d" exact
string matching.
Example:
#1/1 align/mov:OK
..
#1/12 align/pointer variable subtraction:OK
#1 align:OK
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-4-fallentree@fb.com
In skip_account(), test->skip_cnt is set to 0 at the end, this makes next print
statement never display SKIP status for the subtest. This patch moves the
accounting logic after the print statement, fixing the issue.
This patch also added SKIP status display for normal tests.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-3-fallentree@fb.com
When using "-l", test_progs often is executed as non-root user,
load_bpf_testmod() will fail and output errors. This patch skips loading bpf
testmod when "-l" is specified, making output cleaner.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-2-fallentree@fb.com
Using a fixed delay of 1 microsecond has proven flaky in slow CPU environment,
e.g. Github Actions CI system. This patch adds exponential backoff with a cap
of 50ms to reduce the flakiness of the test. Initial delay is chosen at random
in the range [0ms, 5ms).
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817045713.3307985-1-fallentree@fb.com
As previously discussed with David Ahern, here is a refactored and improved
version of the IOAM self-test. It is now more complete and more robust. Now,
all tests are divided into three categories: OUTPUT (evaluates the IOAM
processing by the sender), INPUT (evaluates the IOAM processing by the receiver)
and GLOBAL (evaluates wider use cases that do not fall into the other two
categories). Both OUTPUT and INPUT tests only use a two-node topology (alpha and
beta), while GLOBAL tests use the entire three-node topology (alpha, beta,
gamma). Each test is documented inside its own handler in the (bash) script.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using a fixed delay of 1 microsecond has proven flaky in slow CPU environment,
e.g. Github Actions CI system. This patch adds exponential backoff with a cap
of 50ms to reduce the flakiness of the test. Initial delay is chosen at random
in the range [0ms, 5ms).
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210816175250.296110-1-fallentree@fb.com
Add two new test cases in sockmap tests, where unix stream is
redirected to tcp and vice versa.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-6-jiang.wang@bytedance.com
This is to prepare for adding new unix stream tests.
Mostly renames, also pass the socket types as an argument.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-5-jiang.wang@bytedance.com
Add two tests for unix stream to unix stream redirection
in sockmap tests.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-4-jiang.wang@bytedance.com
Add test for btf__load_vmlinux_btf/btf__load_module_btf APIs. The test
loads bpf_testmod module BTF and check existence of a symbol which is
known to exist.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210815081035.205879-1-hengqi.chen@gmail.com
Extend attach_probe selftests to specify ref_ctr_offset for uprobe/uretprobe
and validate that its value is incremented from zero.
Turns out that once uprobe is attached with ref_ctr_offset, uretprobe for the
same location/function *has* to use ref_ctr_offset as well, otherwise
perf_event_open() fails with -EINVAL. So this test uses ref_ctr_offset for
both uprobe and uretprobe, even though for the purpose of test uprobe would be
enough.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-17-andrii@kernel.org
When attaching to uprobes through perf subsystem, it's possible to specify
offset of a so-called USDT semaphore, which is just a reference counted u16,
used by kernel to keep track of how many tracers are attached to a given
location. Support for this feature was added in [0], so just wire this through
uprobe_opts. This is important to enable implementing USDT attachment and
tracing through libbpf's bpf_program__attach_uprobe_opts() API.
[0] a6ca88b241 ("trace_uprobe: support reference counter in fd-based uprobe")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-16-andrii@kernel.org
Add selftest with few subtests testing proper bpf_cookie usage.
Kprobe and uprobe subtests are pretty straightforward and just validate that
the same BPF program attached with different bpf_cookie will be triggered with
those different bpf_cookie values.
Tracepoint subtest is a bit more interesting, as it is the only
perf_event-based BPF hook that shares bpf_prog_array between multiple
perf_events internally. This means that the same BPF program can't be attached
to the same tracepoint multiple times. So we have 3 identical copies. This
arrangement allows to test bpf_prog_array_copy()'s handling of bpf_prog_array
list manipulation logic when programs are attached and detached. The test
validates that bpf_cookie isn't mixed up and isn't lost during such list
manipulations.
Perf_event subtest validates that two BPF links can be created against the
same perf_event (but not at the same time, only one BPF program can be
attached to perf_event itself), and that for each we can specify different
bpf_cookie value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-15-andrii@kernel.org
Extract two helpers used for working with uprobes into trace_helpers.{c,h} to
be re-used between multiple uprobe-using selftests. Also rename get_offset()
into more appropriate get_uprobe_offset().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-14-andrii@kernel.org
Wire through bpf_cookie for all attach APIs that use perf_event_open under the
hood:
- for kprobes, extend existing bpf_kprobe_opts with bpf_cookie field;
- for perf_event, uprobe, and tracepoint APIs, add their _opts variants and
pass bpf_cookie through opts.
For kernel that don't support BPF_LINK_CREATE for perf_events, and thus
bpf_cookie is not supported either, return error and log warning for user.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-12-andrii@kernel.org
Add ability to specify bpf_cookie value when creating BPF perf link with
bpf_link_create() low-level API.
Given BPF_LINK_CREATE command is growing and keeps getting new fields that are
specific to the type of BPF_LINK, extend libbpf side of bpf_link_create() API
and corresponding OPTS struct to accomodate such changes. Add extra checks to
prevent using incompatible/unexpected combinations of fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-11-andrii@kernel.org
Detect kernel support for BPF perf link and prefer it when attaching to
perf_event, tracepoint, kprobe/uprobe. Underlying perf_event FD will be kept
open until BPF link is destroyed, at which point both perf_event FD and BPF
link FD will be closed.
This preserves current behavior in which perf_event FD is open for the
duration of bpf_link's lifetime and user is able to "disconnect" bpf_link from
underlying FD (with bpf_link__disconnect()), so that bpf_link__destroy()
doesn't close underlying perf_event FD.When BPF perf link is used, disconnect
will keep both perf_event and bpf_link FDs open, so it will be up to
(advanced) user to close them. This approach is demonstrated in bpf_cookie.c
selftests, added in this patch set.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-10-andrii@kernel.org
bpf_link->destroy() isn't used by any code, so remove it. Instead, add ability
to override deallocation procedure, with default doing plain free(link). This
is necessary for cases when we want to "subclass" struct bpf_link to keep
extra information, as is the case in the next patch adding struct
bpf_link_perf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-9-andrii@kernel.org
Ensure libbpf.so is re-built whenever libbpf.map is modified. Without this,
changes to libbpf.map are not detected and versioned symbols mismatch error
will be reported until `make clean && make` is used, which is a suboptimal
developer experience.
Fixes: 306b267cb3 ("libbpf: Verify versioned symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-8-andrii@kernel.org
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.
BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.
Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.
One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.
The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org
Fixes in virtio,vhost,vdpa drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmEZ7l0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdoQH/ir3ycgBco4pgDlpo0EQzw1eqwuyT69L7fvE
hlEZOqYOE39WvRTbFZLdrk4RQsULuu4x1vBr9AZ/qV2kHIHUlIGkuNqXnJiihsZE
bHGzKV7XGuzwRFXzCEmzTCDo6SFICVpqN9sb+tKMEsb/qiANi22OuDuDqffHldOH
wYmw6BaHPdj+w1+w6PYW8R/M0A9yaI7HngfBxt9OiVCYXNK2QQDiUWOsAaxmshSt
wsTDSwz4T6rRn/chztWC4JxlpossWJ7zywJexPKW02PSBqOV+z6irPkr7Ku3MhJ7
T2OjLzSSub1R+ikuQikZWKY67mvr45fnWFglUsPtO7H4f6biDeA=
=06n4
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes in virtio, vhost, and vdpa drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix queue type selection logic
vdpa/mlx5: Avoid destroying MR on empty iotlb
tools/virtio: fix build
virtio_ring: pull in spinlock header
vringh: pull in spinlock header
virtio-blk: Add validation for block size in config space
vringh: Use wiov->used to check for read/write desc order
virtio_vdpa: reject invalid vq indices
vdpa: Add documentation for vdpa_alloc_device() macro
vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
vp_vdpa: Fix return value check for vdpa_alloc_device()
vdpa_sim: Fix return value check for vdpa_alloc_device()
vhost: Fix the calculation in vhost_overflow()
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
virtio_pci: Support surprise removal of virtio pci device
virtio: Protect vqs list access
virtio: Keep vring_del_virtqueue() mirror of VQ create
virtio: Improve vq->broken access to avoid any compiler optimization
Update ktest example for the boot-time tracing with histogram
options. Note that since the histogram option uses "trace()" action
instead of "EVENT()", this updates the matching pattern too.
Link: https://lkml.kernel.org/r/162856130208.203126.4458319094852152589.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add group or all event enabling syntax support to bconf2ftrace.sh.
User can pass a bootconfig file which includes
ftrace[.instance.INSTANCE].event.enable
and
ftrace[.instance.INSTANCE].event.GROUP.enable
correctly.
Link: https://lkml.kernel.org/r/162856127850.203126.16694505101982548237.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch adds various "positive" patterns for "%c" and two "negative"
patterns for wide character.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210814015718.42704-5-kuniyu@amazon.co.jp
The iterator can output almost the same result compared to /proc/net/unix.
The header line is aligned, and the Inode column uses "%8lu" because "%5lu"
can be easily overflown.
# cat /sys/fs/bpf/unix
Num RefCount Protocol Flags Type St Inode Path
ffff963c06689800: 00000002 00000000 00010000 0001 01 18697 private/defer
ffff963c7c979c00: 00000002 00000000 00000000 0001 01 598245 @Hello@World@
# cat /proc/net/unix
Num RefCount Protocol Flags Type St Inode Path
ffff963c06689800: 00000002 00000000 00010000 0001 01 18697 private/defer
ffff963c7c979c00: 00000002 00000000 00000000 0001 01 598245 @Hello@World@
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210814015718.42704-4-kuniyu@amazon.co.jp
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of dax_direct_access
paths preparing for stray-write protection.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYRhC0wAKCRDfioYZHlFs
Z6InAQD+duS9GS5DnnFInmRDj/rMRQFVB4X25mmSlViYOR0gNwEAtJQP03CGAp+G
+DP7/nu2HrIhx8Ng8vTsu8ZnO8ge7Qw=
=zmii
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A couple of fixes for long standing bugs, a warning fixup, and some
miscellaneous dax cleanups.
The bugs were recently found due to new platforms looking to use the
ACPI NFIT "virtual" device definition, and new error injection
capabilities to trigger error responses to label area requests. Ira's
cleanups have been long pending, I neglected to send them earlier, and
see no harm in including them now. This has all appeared in -next with
no reported issues.
Summary:
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of
dax_direct_access paths preparing for stray-write protection"
* tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix missing 'fallthrough' warning
libnvdimm/region: Fix label activation vs errors
ACPI: NFIT: Fix support for virtual SPA ranges
dax: Ensure errno is returned from dax_direct_access
fs/dax: Clarify nr_pages to dax_direct_access()
fs/fuse: Remove unneeded kaddr parameter
Using asm goto in __WARN_FLAGS() and WARN_ON() allows more
flexibility to GCC.
For that add an entry to the exception table so that
program_check_exception() knowns where to resume execution
after a WARNING.
Here are two exemples. The first one is done on PPC32 (which
benefits from the previous patch), the second is on PPC64.
unsigned long test(struct pt_regs *regs)
{
int ret;
WARN_ON(regs->msr & MSR_PR);
return regs->gpr[3];
}
unsigned long test9w(unsigned long a, unsigned long b)
{
if (WARN_ON(!b))
return 0;
return a / b;
}
Before the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
3c0: 80 63 00 0c lwz r3,12(r3)
3c4: 4e 80 00 20 blr
0000000000000bf0 <.test9w>:
bf0: 7c 89 00 74 cntlzd r9,r4
bf4: 79 29 d1 82 rldicl r9,r9,58,6
bf8: 0b 09 00 00 tdnei r9,0
bfc: 2c 24 00 00 cmpdi r4,0
c00: 41 82 00 0c beq c0c <.test9w+0x1c>
c04: 7c 63 23 92 divdu r3,r3,r4
c08: 4e 80 00 20 blr
c0c: 38 60 00 00 li r3,0
c10: 4e 80 00 20 blr
After the patch:
000003a8 <test>:
3a8: 81 23 00 84 lwz r9,132(r3)
3ac: 71 29 40 00 andi. r9,r9,16384
3b0: 40 82 00 0c bne 3bc <test+0x14>
3b4: 80 63 00 0c lwz r3,12(r3)
3b8: 4e 80 00 20 blr
3bc: 0f e0 00 00 twui r0,0
0000000000000c50 <.test9w>:
c50: 7c 89 00 74 cntlzd r9,r4
c54: 79 29 d1 82 rldicl r9,r9,58,6
c58: 0b 09 00 00 tdnei r9,0
c5c: 7c 63 23 92 divdu r3,r3,r4
c60: 4e 80 00 20 blr
c70: 38 60 00 00 li r3,0
c74: 4e 80 00 20 blr
In the first exemple, we see GCC doesn't need to duplicate what
happens after the trap.
In the second exemple, we see that GCC doesn't need to emit a test
and a branch in the likely path in addition to the trap.
We've got some WARN_ON() in .softirqentry.text section so it needs
to be added in the OTHER_TEXT_SECTIONS in modpost.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/389962b1b702e3c78d169e59bcfac56282889173.1618331882.git.christophe.leroy@csgroup.eu
Default to prefixed pkg-config when crosscompiling, this matches what
other parts of the tools/ directory already do.
[dlezcano] : Reworked description
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/31302992.qZodDJZGDc@devpool47
- Remove empty macros assignments
- Use directory creation parameter for the install tool
- Use $OBJ instead of building the list of object for the 'clean' target
[dlezcano] : Changed title and description
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1951386.ZPQrlMDjM2@devpool47
Add more test-case for link failures scenario,
including recovery from link failure using only
backup subflows and bi-directional transfer.
Additionally explicitly check for stale count
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This Kselftest fixes update for Linux 5.14-rc6 consists of a single patch
to sgx test to fix Q1 and Q2 calculation.
-----BEGIN PGP SIGNATURE-----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=wKY6
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A single patch to sgx test to fix Q1 and Q2 calculation"
* tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
