RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cesa driver mixes use of iomem pointers and normal kernel
pointers. Sometimes it uses memcpy_toio/memcpy_fromio on both
while other times it would use straight memcpy on both, through
the sg_pcopy_* helpers.
This patch fixes this by adding a new field sram_pool to the engine
for the normal pointer case which then allows us to use the right
interface depending on the value of engine->pool.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While ctr(aes) requires the use of a special descriptor on SEC2 (see
commit 70d355ccea ("crypto: talitos - fix ctr-aes-talitos")), that
special descriptor doesn't work on SEC1, see commit e738c5f155
("powerpc/8xx: Add DT node for using the SEC engine of the MPC885").
However, the common nonsnoop descriptor works properly on SEC1 for
ctr(aes).
Add a second template for ctr(aes) that will be registered
only on SEC1.
Fixes: 70d355ccea ("crypto: talitos - fix ctr-aes-talitos")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Talitos Security Engine AESU considers any input
data size that is not a multiple of 16 bytes to be an error.
This is not a problem in general, except for Counter mode
that is a stream cipher and can have an input of any size.
Test Manager for ctr(aes) fails on 4th test vector which has
a length of 499 while all previous vectors which have a 16 bytes
multiple length succeed.
As suggested by Freescale, round up the input data length to the
nearest 16 bytes.
Fixes: 5e75ae1b3c ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uacce SysFS support more algorithms inqury such as
'ecdh/ecdsa/sm2/x25519/x448'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.One CE error is detecting timeout of generating a random number.
2.Another is detecting timeout of SVA prefetching address.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete 'HPRE_RAS_ECC1BIT_TH' register setting of hpre,
since register 'QM_RAS_CE_THRESHOLD' of qm has done this work.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Taking ownership of the FPU in kernel mode disables preemption, and
this may result in excessive scheduling blackouts if the size of the
data being processed on the FPU is unbounded.
Given that taking and releasing the FPU is cheap these days on x86, we
can limit the impact of this issue easily for skcipher implementations,
by moving the FPU begin/end calls inside the skcipher walk processing
loop. Considering that skcipher walks operate on at most one page at a
time, doing so fully mitigates this issue.
This also permits the skcipher walk logic to use non-atomic kmalloc()
calls etc so we can change the 'atomic' bool argument in the calls to
skcipher_walk_virt() to false as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Indirect calls are very expensive on x86, so use a static call to set
the system-wide AES-NI/CTR asm helper.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
src_size and aad_size are defined as u32, so the following expressions are
currently being evaluated using 32-bit arithmetic:
bit_len = src_size * 8;
...
bit_len = aad_size * 8;
However, bit_len is used afterwards in a context that expects a valid
64-bit value (the lower and upper 32-bit words of bit_len are extracted
and written to hw).
In order to make sure the correct bit length is generated and the 32-bit
multiplication does not wrap around, cast src_size and aad_size to u64.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With no mod_exit function, users are unable to unload the module after
use. I'm not aware of any reason why module unloading should be
prohibited for this one, so this commit simply adds an empty exit
function.
Reported-and-tested-by: John Donnelly <john.p.donnelly@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Attach LFs to CPT VF to process the crypto requests and register
LF interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Marvell OcteonTX2 CPT virtual function
driver. This patch includes probe, PCI specific initialization
and interrupt handling.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds support to get engine capabilities and adds a new mailbox
to share capabilities with VF driver.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT RVU Local Functions(LFs) needs to be attached to the
PF/VF to submit the instructions to CPT.
This patch adds the interface to initialize and attach
the LFs. It also adds interface to register the LF's
interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT includes microcoded GigaCypher symmetric engines(SEs), IPsec
symmetric engines(IEs), and asymmetric engines (AEs).
Each engine receives CPT instructions from the engine groups it has
subscribed to. This patch loads microcode, configures three engine
groups(one for SEs, one for IEs and one for AEs), and configures
all engines.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds 'sriov_configure' to enable/disable virtual functions (VFs).
Also Initializes VF<=>PF mailbox IRQs, register handlers for
processing these mailbox messages.
Admin function (AF) handles resource allocation and configuration for
PFs and their VFs. PFs request the AF directly, via mailboxes.
Unlike PFs, VFs cannot send a mailbox request directly. A VF sends
mailbox messages to its parent PF, with which it shares a mailbox
region. The PF then forwards these messages to the AF. After handling
the request, the AF sends a response back to the VF, through the PF.
This patch adds support for this 'VF <=> PF <=> AF' mailbox
communication.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the resource virtualization unit (RVU) each of the PF and AF
(admin function) share a 64KB of reserved memory region for
communication. This patch initializes PF <=> AF mailbox IRQs,
registers handlers for processing these communication messages.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds skeleton for the Marvell OcteonTX2 CPT physical function
driver which includes probe, PCI specific initialization and
hardware register defines.
RVU defines are present in AF driver
(drivers/net/ethernet/marvell/octeontx2/af), header files from
AF driver are included here to avoid duplication.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerated, instruction based implementations of SHA1, SHA2 and
SHA3 are autoloaded based on CPU capabilities, given that the code is
modest in size, and widely used, which means that resolving the algo
name, loading all compatible modules and picking the one with the
highest priority is taken to be suboptimal.
However, if these algorithms are requested before this CPU feature
based matching and autoloading occurs, these modules are not even
considered, and we end up with suboptimal performance.
So add the missing module aliases for the various SHA implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike many other structure types defined in the crypto API, the
'shash_desc' structure is permitted to live on the stack, which
implies its contents may not be accessed by DMA masters. (This is
due to the fact that the stack may be located in the vmalloc area,
which requires a different virtual-to-physical translation than the
one implemented by the DMA subsystem)
Our definition of CRYPTO_MINALIGN_ATTR is based on ARCH_KMALLOC_MINALIGN,
which may take DMA constraints into account on architectures that support
non-cache coherent DMA such as ARM and arm64. In this case, the value is
chosen to reflect the largest cacheline size in the system, in order to
ensure that explicit cache maintenance as required by non-coherent DMA
masters does not affect adjacent, unrelated slab allocations. On arm64,
this value is currently set at 128 bytes.
This means that applying CRYPTO_MINALIGN_ATTR to struct shash_desc is both
unnecessary (as it is never used for DMA), and undesirable, given that it
wastes stack space (on arm64, performing the alignment costs 112 bytes in
the worst case, and the hole between the 'tfm' and '__ctx' members takes
up another 120 bytes, resulting in an increased stack footprint of up to
232 bytes.) So instead, let's switch to the minimum SLAB alignment, which
does not take DMA constraints into account.
Note that this is a no-op for x86.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the following additional dependencies for CRYPTO_DEV_KEEMBAY_OCS_HCU:
- HAS_IOMEM to prevent build failures
- ARCH_KEEMBAY to prevent asking the user about this driver when
configuring a kernel without Intel Keem Bay platform support.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The first argument to WARN() is a condition and the messages is the
second argument is the string, so this WARN() will only display the
__func__ part of the message.
Fixes: ae832e329a ("crypto: keembay-ocs-hcu - Add HMAC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Camellia, Serpent and Twofish related header files only contain
declarations that are shared between different implementations of the
respective algorithms residing under arch/x86/crypto, and none of their
contents should be used elsewhere. So move the header files into the
same location, and use local #includes instead.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All dependencies on the x86 glue helper module have been replaced by
local instantiations of the new ECB/CBC preprocessor helper macros, so
the glue helper module can be retired.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86 glue helper module is starting to show its age:
- It relies heavily on function pointers to invoke asm helper functions that
operate on fixed input sizes that are relatively small. This means the
performance is severely impacted by retpolines.
- It goes to great lengths to amortize the cost of kernel_fpu_begin()/end()
over as much work as possible, which is no longer necessary now that FPU
save/restore is done lazily, and doing so may cause unbounded scheduling
blackouts due to the fact that enabling the FPU in kernel mode disables
preemption.
- The CBC mode decryption helper makes backward strides through the input, in
order to avoid a single block size memcpy() between chunks. Consuming the
input in this manner is highly likely to defeat any hardware prefetchers,
so it is better to go through the data linearly, and perform the extra
memcpy() where needed (which is turned into direct loads and stores by the
compiler anyway). Note that benchmarks won't show this effect, given that
the memory they use is always cache hot.
- It implements blockwise XOR in terms of le128 pointers, which imply an
alignment that is not guaranteed by the API, violating the C standard.
GCC does not seem to be smart enough to elide the indirect calls when the
function pointers are passed as arguments to static inline helper routines
modeled after the existing ones. So instead, let's create some CPP macros
that encapsulate the core of the ECB and CBC processing, so we can wire
them up for existing users of the glue helper module, i.e., Camellia,
Serpent, Twofish and CAST6.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Blowfish in counter mode is never used in the kernel, so there
is no point in keeping an accelerated implementation around.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DES or Triple DES in counter mode is never used in the kernel, so there
is no point in keeping an accelerated implementation around.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The glue helper's CTR routines are no longer used, so drop them.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Twofish in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAST6 in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAST5 in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Serpent in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Camellia in CTR mode is never used by the kernel directly, and is highly
unlikely to be relied upon by dm-crypt or algif_skcipher. So let's drop
the accelerated CTR mode implementation, and instead, rely on the CTR
template and the bare cipher.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The glue helper's XTS routines are no longer used, so drop them.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Twofish in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Serpent in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement CAST6 in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Camellia in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register SEC device to uacce framework for user space.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
