Eric Dumazet says:
====================
ipv6: more data-race annotations
Small follow up series, taking care of races around
np->mcast_oif and np->ucast_oif.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
np->ucast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_UNICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->mcast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b8dbbbc535 ("net: rtnetlink: remove local list
in __linkwatch_run_queue()"). It's evidently broken when there's a
non-urgent work that gets added back, and then the loop can never
finish.
While reverting, add a note about that.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b8dbbbc535 ("net: rtnetlink: remove local list in __linkwatch_run_queue()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device supports UDP hardware segmentation offload, which helps
improving the performance. Thus, this patch adds support for UDP
segmentation offload from the driver side.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow jumbo frames by changing maximum MTU size and number of RX queues.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver would like to transmit a jumbo frame like 2KiB or more,
it should be split into multiple queues. In the near future, to support
this, add handling specific descriptor types F{START,MID,END}. However,
such jumbo frames will not happen yet because the maximum MTU size is
still default for now.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If this hardware receives a jumbo frame like 2KiB or more, it will be
split into multiple queues. In the near future, to support this,
add handling specific descriptor types F{START,MID,END}. However, such
jumbo frames will not happen yet because the maximum MTU size is still
default for now.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support jumbo frames, set GWMDNC register with acceptable maximum
values for TX and RX.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver would like to transmit a jumbo frame like 2KiB or more,
it should be split into multiple queues. In the near future, to support
this, add a setting ext descriptor function to improve code readability.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver would like to transmit a jumbo frame like 2KiB or more,
it should be split into multiple queues. In the near future, to support
this, add unmap_addrs array to unmap dma mapping address instead of dma
address in each TX descriptor because the descriptors may not have
the top dma address.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If this hardware receives a jumbo frame like 2KiB or more, it will be
split into multiple queues. In the near future, to support this, use
build_skb() instead of netdev_alloc_skb_ip_align().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Array index should not be negative, so use unsigned int for
descriptors related array index.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop unused argument and return value of rswitch_tx_free() to
simplify the code.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect mdiodev->modalias to be NUL-terminated based on its usage with
strcmp():
| return strcmp(mdiodev->modalias, drv->name) == 0;
Moreover, mdiodev->modalias is already zero-allocated:
| mdiodev = kzalloc(sizeof(*mdiodev), GFP_KERNEL);
... which means the NUL-padding strncpy provides is not necessary.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect fw_info->fw_file_name to be NUL-terminated based on its use
within _request_firmware_prepare() wherein `name` refers to it:
| if (firmware_request_builtin_buf(firmware, name, dbuf, size)) {
| dev_dbg(device, "using built-in %s\n", name);
| return 0; /* assigned */
| }
... and with firmware_request_builtin() also via `name`:
| if (strcmp(name, b_fw->name) == 0) {
There is no evidence that NUL-padding is required.
Additionally replace size macro (QLC_FW_FILE_NAME_LEN) with
sizeof(fw_info->fw_file_name) to more directly tie the maximum buffer
size to the destination buffer:
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
host_info allocation is done in ena_com_allocate_host_info() via
dma_alloc_coherent() and is not zero initialized by alloc_etherdev_mq().
However zero initialization of the destination doesn't matter in this case,
because strscpy() guarantees a NULL termination.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
My prior patch went a bit too far, because apparently fib6_has_expires()
could be true while f6i->gc_link is not hashed yet.
fib6_set_expires_locked() can indeed set RTF_EXPIRES
while f6i->fib6_table is NULL.
Original syzbot reports were about corruptions caused
by dangling f6i->gc_link.
Fixes: 5a08d0065a ("ipv6: add debug checks in fib6_info_release()")
Reported-by: syzbot+c15aa445274af8674f41@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231207201322.549000-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My previous patch added a call to linkwatch_sync_dev(),
but that of course needs to be called under RTNL, which
I missed earlier, but now saw RCU warnings from.
Fix that by acquiring the RTNL in a similar fashion to
how other files do it here.
Fixes: facd15dfd6 ("net: core: synchronize link-watch when carrier is queried")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231206172122.859df6ba937f.I9c80608bcfbab171943ff4942b52dbd5e97fe06e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value from nla_len() is never expected to be negative, and can
never be more than struct nlattr::nla_len (a u16). Adjust the prototype
on the function. This will let GCC's value range optimization passes
know that the return can never be negative, and can never be larger than
u16. As recently discussed[1], this silences the following warning in
GCC 12+:
net/wireless/nl80211.c: In function 'nl80211_set_cqm_rssi.isra':
net/wireless/nl80211.c:12892:17: warning: 'memcpy' specified bound 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
12892 | memcpy(cqm_config->rssi_thresholds, thresholds,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12893 | flex_array_size(cqm_config, rssi_thresholds,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12894 | n_thresholds));
| ~~~~~~~~~~~~~~
A future change would be to clamp the subtraction to make sure it never
wraps around if nla_len is somehow less than NLA_HDRLEN, which would
have the additional benefit of being defensive in the face of nlattr
corruption or logic errors.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311090752.hWcJWAHL-lkp@intel.com/ [1]
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Michael Walle <mwalle@kernel.org>
Cc: Max Schulze <max.schulze@online.de>
Link: https://lore.kernel.org/r/20231202202539.it.704-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231206205904.make.018-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the use of define DSA_TAG_PROTO_LAN937X_VALUE to
DSA_TAG_PROTO_LAN937X to improve readability.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20231206160124.1935451-1-sean@geanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 227b60f510 added a seqlock to ensure that the low and high
port numbers were always updated together.
This is overkill because the two 16bit port numbers can be held in
a u32 and read/written in a single instruction.
More recently 91d0b78c51 added support for finer per-socket limits.
The user-supplied value is 'high << 16 | low' but they are held
separately and the socket options protected by the socket lock.
Use a u32 containing 'high << 16 | low' for both the 'net' and 'sk'
fields and use READ_ONCE()/WRITE_ONCE() to ensure both values are
always updated together.
Change (the now trival) inet_get_local_port_range() to a static inline
to optimise the calling code.
(In particular avoiding returning integers by reference.)
Signed-off-by: David Laight <david.laight@aculab.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/4e505d4198e946a8be03fb1b4c3072b0@AcuMS.aculab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
Convert net selftests to run in unique namespace (Part 2)
Here is the 2nd part of converting net selftests to run in unique namespace.
This part converts all bridge, vxlan, vrf tests.
Here is the part 1 link:
https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./vrf-xfrm-tests.sh
No qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
netem qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
Tests passed: 14
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./vrf_strict_mode_test.sh
################################################################################
TEST SECTION: VRF strict_mode test on init network namespace
################################################################################
TEST: init: net.vrf.strict_mode is available [ OK ]
TEST: init: strict_mode=0 by default, 0 vrfs [ OK ]
...
TEST: init: check strict_mode=1 [ OK ]
TEST: testns-HvoZkB: check strict_mode=0 [ OK ]
Tests passed: 37
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./vrf_route_leaking.sh
###########################################################################
IPv4 (sym route): VRF ICMP ttl error route lookup ping
###########################################################################
TEST: Basic IPv4 connectivity [ OK ]
TEST: Ping received ICMP ttl exceeded [ OK ]
...
TEST: Basic IPv6 connectivity [ OK ]
TEST: Traceroute6 reports a hop on r1 [ OK ]
Tests passed: 18
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./test_vxlan_vnifiltering.sh
TEST: Create traditional vxlan device [ OK ]
TEST: Cannot create vnifilter device without external flag [ OK ]
TEST: Creating external vxlan device with vnifilter flag [ OK ]
...
TEST: VM connectivity over traditional vxlan (ipv6 default rdst) [ OK ]
TEST: VM connectivity over metadata nonfiltering vxlan (ipv4 default rdst) [ OK ]
Tests passed: 27
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./test_vxlan_nolocalbypass.sh
TEST: localbypass enabled [ OK ]
TEST: Packet received by local VXLAN device - localbypass [ OK ]
TEST: localbypass disabled [ OK ]
TEST: Packet not received by local VXLAN device - nolocalbypass [ OK ]
TEST: localbypass enabled [ OK ]
TEST: Packet received by local VXLAN device - localbypass [ OK ]
Tests passed: 6
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./test_vxlan_mdb.sh
Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay
--------------------------------------------------------------------
TEST: MDB entry addition [ OK ]
...
Data path: MDB torture test - IPv6 overlay / IPv6 underlay
----------------------------------------------------------
TEST: Torture test [ OK ]
Tests passed: 620
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./test_bridge_neigh_suppress.sh
Per-port ARP suppression - VLAN 10
----------------------------------
TEST: arping [ OK ]
TEST: ARP suppression [ OK ]
...
TEST: NS suppression (VLAN 20) [ OK ]
Tests passed: 148
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no h1 h2 actually. Remove it. Here is the test result after
conversion.
]# ./test_bridge_backup_port.sh
Backup port
-----------
TEST: Forwarding out of swp1 [ OK ]
TEST: No forwarding out of vx0 [ OK ]
TEST: swp1 carrier off [ OK ]
TEST: No forwarding out of swp1 [ OK ]
...
Backup nexthop ID - ping
------------------------
TEST: Ping with backup nexthop ID [ OK ]
TEST: Ping after disabling backup nexthop ID [ OK ]
Backup nexthop ID - torture test
--------------------------------
TEST: Torture test [ OK ]
Tests passed: 83
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Justin Stitt says:
====================
ethtool: Add ethtool_puts()
This series aims to implement ethtool_puts() and send out a wave 1 of
conversions from ethtool_sprintf(). There's also a checkpatch patch
included to check for the cases listed below.
This was sparked from recent discussion here [1]
The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
| ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
| ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
| ethtool_puts(&data, buffer[i].name);
The first case commonly triggers a -Wformat-security warning with Clang
due to potential problems with format flags present in the strings [3].
The second is just a bit weird with a plain-ol' "%s".
Changes found with Cocci [4] and grep [5].
[1]: https://lore.kernel.org/all/202310141935.B326C9E@keescook/
[2]: https://lore.kernel.org/all/?q=dfb%3Aethtool_sprintf+AND+f%3Ajustinstitt
[3]: https://lore.kernel.org/all/202310101528.9496539BE@keescook/
[4]: (script authored by Kees w/ modifications from Joe)
@replace_2_args@
expression BUF;
expression VAR;
@@
- ethtool_sprintf(BUF, VAR)
+ ethtool_puts(BUF, VAR)
@replace_3_args@
expression BUF;
expression VAR;
@@
- ethtool_sprintf(BUF, "%s", VAR)
+ ethtool_puts(BUF, VAR)
- ethtool_sprintf(&BUF, "%s", VAR)
+ ethtool_puts(&BUF, VAR)
[5]: $ rg "ethtool_sprintf\(\s*[^,)]+\s*,\s*[^,)]+\s*\)"
Signed-off-by: Justin Stitt <justinstitt@google.com>
---
Changes in v5:
- updated documentation to include info about the lack of a trailing newline
(Thanks Russell)
- rebased onto mainline
- Link to v4: https://lore.kernel.org/r/20231102-ethtool_puts_impl-v4-0-14e1e9278496@google.com
Changes in v4:
- update documentation to match:
https://lore.kernel.org/all/20231028192511.100001-1-andrew@lunn.ch/
- Link to v3: https://lore.kernel.org/r/20231027-ethtool_puts_impl-v3-0-3466ac679304@google.com
Changes in v3:
- fix force_speed_maps merge conflict + formatting (thanks Vladimir)
- rebase onto net-next (thanks Andrew, Vladimir)
- change subject (thanks Vladimir)
- fix checkpatch formatting + implementation (thanks Joe)
- Link to v2: https://lore.kernel.org/r/20231026-ethtool_puts_impl-v2-0-0d67cbdd0538@google.com
Changes in v2:
- wrap lines better in replacement (thanks Joe, Kees)
- add --fix to checkpatch (thanks Joe)
- clean up checkpatch formatting (thanks Joe, et al.)
- rebase against next
- Link to v1: https://lore.kernel.org/r/20231025-ethtool_puts_impl-v1-0-6a53a93d3b72@google.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts some basic cases of ethtool_sprintf() to
ethtool_puts().
The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
| ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
| ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
| ethtool_puts(&data, buffer[i].name);
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some warnings for using ethtool_sprintf() where a simple
ethtool_puts() would suffice.
The two cases are:
1) Use ethtool_sprintf() with just two arguments:
| ethtool_sprintf(&data, driver[i].name);
or
2) Use ethtool_sprintf() with a standalone "%s" fmt string:
| ethtool_sprintf(&data, "%s", driver[i].name);
The former may cause -Wformat-security warnings while the latter is just
not preferred. Both are safely in the category of warnings, not errors.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use strscpy() to implement ethtool_puts().
Functionally the same as ethtool_sprintf() when it's used with two
arguments or with just "%s" format specifier.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Madhuri Sripada <madhuri.sripada@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Louis Peens says:
====================
nfp: add ext_ack messages to supported callbacks
This is a mostly cosmetic series to add error messages to devlink and
ethtool callbacks which supports them but did not have them added in the
nfp driver yet.
====================
Link: https://lore.kernel.org/r/20231206151209.20296-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add descriptive error messages to common devlink failures to
be more user friendly.
Signed-off-by: Ryno Swart <ryno.swart@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231206151209.20296-3-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add descriptive error messages to common ethtool failures to be more
user friendly.
Update `nfp_net_coalesce_para_check` to only check one argument, which
facilitates unique error messages.
Additionally, three error codes are updated to `EOPNOTSUPP` to reflect
that these operations are not supported.
Signed-off-by: Ryno Swart <ryno.swart@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231206151209.20296-2-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- 3 fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bkyC
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
Just one patch.
f5d39b0208 ("freezer,sched: Rewrite core freezer logic") changed how
freezing state is recorded which cgroup_freezing() disagree with the actual
state of the task while thawing triggering a warning. Fix it by updating
cgroup_freezing().
-----BEGIN PGP SIGNATURE-----
iIMEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZXDMtQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGX2kAQDqVMZJ+fq3+nGYZNWdsCP+GtDOjsMf8GaadsMT
e8Iu4QDzBo6QwRyFIA4glPQVWiTh3R35XeN0TCN1qEfCTYEICw==
=F8Zn
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Just one fix.
Commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
changed how freezing state is recorded which made cgroup_freezing()
disagree with the actual state of the task while thawing triggering a
warning. Fix it by updating cgroup_freezing()"
* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup_freezer: cgroup_freezing: Check if not frozen
Just one patch to fix a bug which can crash the kernel if the housekeeping
and wq_unbound_cpu cpumask configuration combination leaves the latter
empty.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZXDKTg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGTmMAP9kuC9JkII2J5JnxQpkJLDd/qeRHrigrClx3F0+
gBiK8AD/XgsGY5J/OOMjsU1Px7BYvy6w0MEEqqhx2vOVEkEFPAo=
=pH9n
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one patch to fix a bug which can crash the kernel if the
housekeeping and wq_unbound_cpu cpumask configuration combination
leaves the latter empty"
* tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Make sure that wq_unbound_cpumask is never empty
An incremental fix for the fix introduced during the merge window for
caching of the selector for windowed register ranges, we were
incorrectly leaking an error code in the case where the last selector
accessed was for some reason not cached.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVwemYACgkQJNaLcl1U
h9DecggAhT3ijchVwpm+8o3d7WK177kJlTQlH70Qr91v5tr5tfW0hva8XMSk8Q6R
DItUN8GKg25nJ3SjNE/DV+LygtGNOrgFUvF8r1FIzELNbi6MwCtbub9oR6B/mpGY
FvHD+7AgiA4nGNaY5DODe+/I9WSSpwc+eJqzKBGPsAw69kc+4M1Ab43h7g1T6OWV
oepA20niqQzMs2tmzW1T+yjBEc7jvhQyvU2VY39atJG9KvLQxhj3zQdGbOxfpOdU
Vk0PfHDoZA0IKiJROfU7tOOUVQ8P5JiZPPLo8hXf2zIENZanuf4QAPA86Bh8KHRp
atgNPjXyncr/T3o+fyszoNGoiteamw==
=bsmE
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"An incremental fix for the fix introduced during the merge window for
caching of the selector for windowed register ranges. We were
incorrectly leaking an error code in the case where the last selector
accessed was for some reason not cached"
* tag 'regmap-fix-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix bogus error on regcache_sync success
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmVw93wACgkQ+vtdtY28
YcM6yQ/9F7BXsgx/QSkvrBUB0yx7LqO7fD8daDyYm6YQm36LzTfLvi/m+AlycPXL
O6JuW05+/aS2wIpjRnnUuaGeuHIMrIkYIG0BN/evonsqWFc6qwokr/0VOFJaz1wR
sj1A0M2pKsBBEzq4Nd0BdmRLj04EfOzQzjll0rtRdk+TvNbbK6OnZ4XXQjBEgStz
J/F5PR6tFkdSCaZicpCjkP3Y77Wdt1hH7zWPnZ8IMyykiPGqKjL8FlmpvX2ujG+E
vrHwPEHrMHomZ9l07ybHpve/LIA1P0xlUuv3u59dfFRxLYE3QZJwfZA8eVbt4z3z
UcAfwcfdQbvU6Pz7uENpsI7hYhMGO9a+kRHV8X9gSEdUO4lu7ZW+z4/OunD13eeQ
gJF+GInvzhVPbK9ufwe1CixtTy1rhN0RapiloMQmQmx5/y3T1RpWqhIOraxYR/QM
aIGXDlAS5djoeErcqvkrsHYeJw9K99hL9q58xi4TC3jhiwLFYl4YqY7g+Tjoenmu
4+jsJkTkEjVOVPrjv7d1Z69iP878IvR6EHJrhxBTdE3eWJU9yR7icllzt/3SHaHJ
39zXVTWU/0OLhhU5NTg3j9AN4EhFJnRCSdLpOQ8btZNLgYdJ0qO2P8EZJdkf4QpA
WjpeTRJiRoo2LbrQ85JUTiALxhWqArMaDiEPeDf55hyrq6M81Ck=
=+lyN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
dt-bindings: lcdif: Properly describe the i.MX23 interrupts
dt-bindings: interrupt-controller: Allow #power-domain-cells
of: dynamic: Fix of_reconfig_get_state_change() return value documentation
dt-bindings: display: mediatek: dsi: remove Xinlei's mail
dt: dt-extract-compatibles: Don't follow symlinks when walking tree
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZXC60QAKCRBZrE9hU+XO
McbwAPwIlGYIdYzUXGVGCrCBq7wtBR8ADfFqIa42hUlkDyZ4tAEA8LgrZutAFwhq
35kVk6FSwrUGuIhX5TkxTxnp814nzwE=
=iiB1
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Fix i8042 filter resource handling, input, and suspend issues in
asus-wmi
- Skip zero instance WMI blocks to avoid issues with some laptops
- Differentiate dev/production keys in mlxbf-bootctl
- Correct surface serdev related return value to avoid leaking errno
into userspace
- Error checking fixes
* tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Check devm_hwmon_device_register_with_groups() return value
platform/mellanox: Add null pointer checks for devm_kasprintf()
mlxbf-bootctl: correctly identify secure boot with development keys
platform/x86: wmi: Skip blocks with zero instances
platform/surface: aggregator: fix recv_buf() return value
platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend
platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd
platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter
platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code
-----BEGIN PGP SIGNATURE-----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=Mfxv
-----END PGP SIGNATURE-----
Merge tag 'x86-int80-20231207' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 int80 fixes from Dave Hansen:
"Avoid VMM misuse of 'int 0x80' handling in TDX and SEV guests.
It also has the very nice side effect of getting rid of a bunch of
assembly entry code"
* tag 'x86-int80-20231207' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Allow 32-bit emulation by default
x86/entry: Do not allow external 0x80 interrupts
x86/entry: Convert INT 0x80 emulation to IDTENTRY
x86/coco: Disable 32-bit emulation by default on TDX and SEV
After backporting commit 581512a6dc ("vsock/virtio: MSG_ZEROCOPY
flag support") in CentOS Stream 9, CI reported the following error:
In file included from ./include/linux/kernel.h:17,
from ./include/linux/list.h:9,
from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:56,
from net/vmw_vsock/virtio_transport_common.c:9:
net/vmw_vsock/virtio_transport_common.c: In function ‘virtio_transport_can_zcopy‘:
./include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck‘
26 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp‘
36 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
./include/linux/minmax.h:45:25: note: in expansion of macro ‘__careful_cmp‘
45 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
net/vmw_vsock/virtio_transport_common.c:63:37: note: in expansion of macro ‘min‘
63 | int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS);
We could solve it by using min_t(), but this operation seems entirely
unnecessary, because we also pass MAX_SKB_FRAGS to iov_iter_npages(),
which performs almost the same check, returning at most MAX_SKB_FRAGS
elements. So, let's eliminate this unnecessary comparison.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Cc: avkrasnov@salutedevices.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://lore.kernel.org/r/20231206164143.281107-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The byte order conversions of ISM GID and DMB token are missing in
process of CLC accept and confirm. So fix it.
Fixes: 3d9725a6a1 ("net/smc: common routine for CLC accept and confirm")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
