Commit graph

967837 commits

Author SHA1 Message Date
Takashi Iwai 61cc2d775e ALSA: usb-audio: Fix EP matching for continuous rates
The function to evaluate the match of the parameters with an EP
assumes only the discrete rate tables and doesn't handle the
continuous rates properly.

This patch fixes match_endpoint_audioformats() to handle the
continuous rates.  Also the almost useless debug prints there are
dropped.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:06 +01:00
Takashi Iwai 75c16b5147 ALSA: usb-audio: Always set up the parameters after resume
The commit 92adc96f8e ("ALSA: usb-audio: set the interface format
after resume on Dell WD19") introduced the workaround for the broken
setup after the resume specifically on a Dell dock model.  However,
the full setup should have been performed after the resume on all
devices, as we can't guarantee the same state.  So this patch removes
the conditional check and applies the workaround always.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:54 +01:00
Takashi Iwai 96e221f379 ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback()
The prepare_data_urb and retire_data_urb fields of the endpoint object
are set dynamically at PCM trigger start/stop.  Those are evaluated in
the endpoint handler, but there can be a race, especially if two
different PCM substreams are handling the same endpoint for the
implicit feedback case.  Also, the data_subs field of the endpoint is
set and accessed dynamically, too, which has the same risk.

As a slight improvement for the concurrency, this patch introduces the
function to set the callbacks and the data in a shot with the memory
barrier.  In the reader side, it's also fetched with the memory
barrier.

There is still a room of race if prepare and retire callbacks are set
during executing the URB completion.  But such an inconsistency may
happen only for the implicit fb source, i.e. it's only about the
capture stream.  And luckily, the capture stream never sets the
prepare callback, hence the problem doesn't happen practically.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:44 +01:00
Takashi Iwai 57234bc103 ALSA: usb-audio: Stop both endpoints properly at error
start_endpoints() may leave the data endpoint running if an error
happens at starting the sync endpoint.  We should stop both streams
properly, instead.

While we're at it, move the debug prints into the endpoint.c that is a
more suitable place.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:36 +01:00
Takashi Iwai 73037c8dc1 ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments
A preliminary change for the later big changes.  This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:27 +01:00
Takashi Iwai 953a446b50 ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments
A preliminary change for the later big changes.  This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:18 +01:00
Takashi Iwai d767aba202 ALSA: usb-audio: Pass snd_usb_audio object to quirk functions
A preliminary patch for the later big change.  Just a minor code
refactoring.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:09 +01:00
Takashi Iwai c7f902015e ALSA: usb-audio: Don't set altsetting before initializing sample rate
Setting the active altsetting at changing sample rate seems
unrecommended.  The host should deselect the altsetting at first
before that, then select it again.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:00 +01:00
Takashi Iwai e42a09bc52 ALSA: usb-audio: Add snd_usb_get_host_interface() helper
Add a helper function to retrieve the usb_host_interface object from
the given interface and altsetting number pair, which is a commonly
used procedure in the driver code.

No functional changes, just minor code refactoring.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:13:47 +01:00
Takashi Iwai 982150560c ALSA: usb-audio: Drop keep_interface flag again
This behavior turned out to be invalid from the USB spec POV and
shouldn't be applied.  As it's an optional flag that is set only via
an card control element that must be hardly used, let's drop it
again.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:13:37 +01:00
Takashi Iwai 54cb31901b ALSA: usb-audio: Create endpoint objects at parsing phase
Currently snd_usb_endpoint objects are created at first when the
substream is opened and tries to assign the endpoints corresponding to
the matching audioformat.  But since basically the all endpoints have
been already parsed and the information have been obtained, we may
create the endpoint objects statically at the init phase.  It's easier
to manage for the implicit fb case, for example.

This patch changes the endpoint object management and lets the parser
to create the all endpoint objects.

This change shouldn't bring any functional changes.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:13:26 +01:00
Takashi Iwai 5fd255f4fe ALSA: usb-audio: Avoid doubly initialization for implicit fb
The implicit feedback mode initializes both the main data stream and
the sync data stream.  When a sync stream was already opened, this
would result in the doubly initialization and might screw up things.

Add the check of already opened sync streams and skip the unnecessary
initialization.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:13:15 +01:00
Takashi Iwai 7ec827b946 ALSA: usb-audio: Drop debug.h
The file debug.h contains a simple macro for debug prints, and it's
used only in two places, the format parser and the hw_params rules.
The former actually should print a more informative message instead,
so the only users are the hw_parmas rules.

This patch moves the contents of debug.h into the hw_params rules
local code and remove the unneeded includes.  Also, the debug print in
the format parser is replaced with the information print with more
useful information, and the raw printk() call is replaced with
pr_debug().

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:13:06 +01:00
Takashi Iwai 7726dce14c ALSA: usb-audio: Simplify hw_params rules
Several hw_params functions narrows the interval via min/max rule in
the very similar way, so factor out those into a helper function and
use commonly.

No functional changes, just minor code refactoring.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:12:56 +01:00
Takashi Iwai 5a6c3e11c9 ALSA: usb-audio: Add hw constraint for implicit fb sync
In the current code, there is no check at the stream open time whether
the endpoint is being already used by others.  In the normal
operations, this shouldn't happen, but in the case of the implicit
feedback mode, it's a common problem with the full duplex operation,
because the capture stream is always opened by the playback stream as
an implicit sync source.

Although we recently introduced the check of such a conflict of
parameters at the PCM hw_params time, it doesn't give any hint at the
hw_params itself and just gives the error.  This isn't quite
comfortable, and it caused problems on many applications.

This patch attempts to make the parameter handling easier by
introducing the strict hw constraint matching with the counterpart
stream that is being used.  That said, when an implicit feedback
playback stream is running before a capture stream is opened, the
capture stream carries the PCM hw-constraint to allow only the same
sample rate, format, periods and period frames as the running playback
stream.  If not opened or there is no conflict of endpoints, the
behavior remains as same as before.

Note that this kind of "weak link" should work for most cases, but
this is no concrete solution; e.g. if an application changes the hw
params multiple times while another stream is opened, this would lead
to inconsistencies.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:12:46 +01:00
Takashi Iwai 1865211d67 ALSA: usb-audio: Move snd_usb_autoresume() call out of setup_hw_info()
This is a preliminary work for the upcoming hw-constraint change for
the implicit feedback mode.

Currently snd_usb_autoresume() is called at the end of
setup_hwinfo().  It's a bit confusing; because of this implicit
refcount usage, the caller side needs to call snd_usb_autosuspend()
later in the error path although it's not seen inside the function.
Instead, it's clearer to call both snd_usb_autoresume() and suspend()
in the very same function.

It's only refactoring and no functional changes.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:12:36 +01:00
Takashi Iwai f6581c0e5d ALSA: usb-audio: Track implicit fb sync endpoint in audioformat list
Instead of parsing and evaluating the sync endpoint and the implicit
feedback mode at each time the audio stream is opened, let's parse it
once at the probe time, as the all needed information can be obtained
statically from the descriptor or from the quirk.

This patch extends audioformat struct to record the sync endpoint,
interface and altsetting as well as the implicit feedback flag, which
are filled at parsing the streams.  Then, set_sync_endpoint() is much
simplified just to follow the already parsed data.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:12:26 +01:00
Takashi Iwai e93e890e16 ALSA: usb-audio: Improve some debug prints
There are a few rooms for improvements wrt the debug prints:
- The EP debug print is shown only at starting, not at stopping
- The EP debug print contains useless object addresses
- Some helpers show the urb and the EP object addresses, too

This patch addresses those shortcomings.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:12:17 +01:00
Takashi Iwai 1803503fe9 ALSA: usb-audio: Set and clear sync EP link properly
The sync EP setup isn't cleared at stopping the stream but expected to
be cleared at the next stream start.  This may leave the sync link
setup stale and can spoof wrongly when full duplex streams were
running in the implicit fb sync.  Let's initialize them properly at
start and end of the stream.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:12:07 +01:00
Takashi Iwai c7474d0977 ALSA: usb-audio: Add snd_usb_get_endpoint() helper
Factor out the code to obtain snd_usb_endpoint object matching with
the given endpoint.  It'll be used in the later patch to add the
implicit feedback hw-constraint.

No functional change by this patch itself.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:11:56 +01:00
Takashi Iwai 2e43aae2bf ALSA: usb-audio: Check implicit feedback EP generically for UAC2
It seems that many UAC2 devices are with the implicit feedback, but
they couldn't be probed properly because the assumption the driver
takes currently isn't applied: they have the single endpoint for both
data and implicit-fb streams, while we checked only the classical sync
endpoints assigned to the next altsetting in the same interface.

This patch extends the search to match with those typical cases where
the implicit fb stream is found in the next interface number.

While we're at it, slightly refactor the code, not returning 0/-ERROR
but use the standard bool to success/failur, which is more intuitive
in this particular case.

Reported-by: Dylan Robinson <dylan_robinson@motu.com>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:11:46 +01:00
Takashi Iwai 93db51d06b ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3
The current driver code assumes blindly that all found sample rates for
the same endpoint from the UAC2 and UAC3 descriptors can be used no
matter which altsetting, but actually this was wrong: some devices
accept only limited sample rates in each altsetting.  For determining
which altsetting supports which rate, we need to verify each sample rate
and check the validity via UAC2_AS_VAL_ALT_SETTINGS.  This control
reports back the available altsettings as a bitmap.

This patch implements the missing piece above, the verification and
reconstructs the sample rate tables based on the result.

An open question is how to deal with the altsettings that ended up
with no valid sample rates after verification.  At least, there is a
device that showed this problem although the sample rates did work in
the later usage (see bug link).  For now, we accept such an altset as
is, assuming that it's a firmware bug.

Reported-by: Dylan Robinson <dylan_robinson@motu.com>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203
Link: https://lore.kernel.org/r/20201123085347.19667-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:11:33 +01:00
Takashi Iwai 4974b79509 ALSA: usb-audio: Don't call usb_set_interface() at trigger callback
The PCM trigger callback is atomic, hence we must not call a function
like usb_set_interface() there.  Calling it from there would lead to a
kernel Oops.

Fix it by moving the usb_set_interface() call to set_sync_endpoint().

Also, apply the snd_usb_set_interface_quirk() for consistency, too.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:11:22 +01:00
Takashi Iwai bc4e94aa8e ALSA: usb-audio: Handle discrete rates properly in hw constraints
In the current code, when the device provides the discrete sample rate
tables with unusual sample rates, the driver tries to gather the whole
values from the audioformat entries and create a hw-constraint rule to
restrict with this single rate list.  This is rather inefficient and
may overlook the rates that are associated only with the certain
audioformat entries.

This patch improves the hw constraint setup by rewriting the existing
hw_rule_rate().  The discrete sample rates (identified by rate_table
and nr_rates of format entry) are checked in the existing
hw_rule_rate() instead of extra rules; in the case of discrete rates,
the function compares with each rate table entry and calculates the
min/max values from there.  For the contiguous rates, the behavior
doesn't change.

Along with it, snd_usb_pcm_check_knot() and snb_usb_substream
rate_list field become superfluous, thus those are dropped.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:11:02 +01:00
Linus Torvalds 418baf2c28 Linux 5.10-rc5 2020-11-22 15:36:08 -08:00
Linus Torvalds d5530d82ef Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:

 - Various functionality / regression fixes for Logitech devices from
   Hans de Goede

 - Fix for (recently added) GPIO support in mcp2221 driver from Lars
   Povlsen

 - Power management handling fix/quirk in i2c-hid driver for certain
   BIOSes that have strange aproach to power-cycle from Hans de Goede

 - a few device ID additions and device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
  HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
  HID: Add Logitech Dinovo Edge battery quirk
  HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
  HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
  HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
  HID: mcp2221: Fix GPIO output handling
  HID: hid-sensor-hub: Fix issue with devices with no report ID
  HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
  HID: add support for Sega Saturn
  HID: cypress: Support Varmilo Keyboards' media hotkeys
  HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
  HID: logitech-hidpp: Add PID for MX Anywhere 2
  HID: uclogic: Add ID for Trust Flex Design Tablet
2020-11-22 14:36:06 -08:00
Linus Torvalds f4b936f5d6 A couple of scheduler fixes:
- Make the conditional update of the overutilized state work correctly by
    caching the relevant flags state before overwriting them and checking
    them afterwards.
 
  - Fix a data race in the wakeup path which caused loadavg on ARM64
    platforms to become a random number generator.
 
  - Fix the ordering of the iowaiter accounting operations so it can't be
    decremented before it is incremented.
 
  - Fix a bug in the deadline scheduler vs. priority inheritance when a
    non-deadline task A has inherited the parameters of a deadline task B
    and then blocks on a non-deadline task C.
 
    The second inheritance step used the static deadline parameters of task
    A, which are usually 0, instead of further propagating task B's
    parameters. The zero initialized parameters trigger a bug in the
    deadline scheduler.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+6edsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaJCEAC7VGr9IlWRzCI/173tKAXkLRrGXHVb
 yOYc/YjLMCTcERNxqpf8uIURd/ATSHU/RMwfFcB558NedKZ/QKZDoKmLqeCXnVeM
 e20tXv/fmpqRS7lgtmbBfhQ8mSDhst960oD1mHifdEwEBCCm7mLEaipTuTWjnZ0x
 rOz70Hir1mSjsP0E7ZorsxCr1yExbrt+jZfKCe9D2kUSvlWHf1ipzAYNlqb/DsfG
 n81G7q9LYV8NUhX3lt8oSZDq0K44aO6G6fEaP4EkfwsIAOh37yPHwuEuqDZCBmXw
 rQ17XUU3jQ2MtubPvVEKG/6Z+hAUyOsAKynpq/RhzueXQm/9Ns6+qHX/xY8yh39y
 S5qPd5DLRlac8f7cFwz2zPxP5E+xTJLONgRkuN1XlitMJZBxru9AzDNa0/6on8TM
 OtvbvVR+bPUfHiHULk4fTz7fLcbgYgxbCgfGoFsVlfskOxnzgEG8WfuI2Up2rRJ0
 nr1MCER+5fprciqPPs+18rVEFiC4mQSrV01cnwrNbpW8pqibZSomMilQ0oQvcTGL
 VDEHkaDTa5YbR92Szq4rYbr7Sf0ihFU0EZUNVQnu7SujdVFxTdHb1yr8UYcYp09b
 LqGFhr1FHBNYKbw3rEPx2R/FGuCii21oQkhz94ujDo1Np8EGVZYwFGh+iwbsa2Xn
 K1u0HzqLTfTkMw==
 =HiGq
 -----END PGP SIGNATURE-----

Merge tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "A couple of scheduler fixes:

   - Make the conditional update of the overutilized state work
     correctly by caching the relevant flags state before overwriting
     them and checking them afterwards.

   - Fix a data race in the wakeup path which caused loadavg on ARM64
     platforms to become a random number generator.

   - Fix the ordering of the iowaiter accounting operations so it can't
     be decremented before it is incremented.

   - Fix a bug in the deadline scheduler vs. priority inheritance when a
     non-deadline task A has inherited the parameters of a deadline task
     B and then blocks on a non-deadline task C.

     The second inheritance step used the static deadline parameters of
     task A, which are usually 0, instead of further propagating task
     B's parameters. The zero initialized parameters trigger a bug in
     the deadline scheduler"

* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix priority inheritance with multiple scheduling classes
  sched: Fix rq->nr_iowait ordering
  sched: Fix data-race in wakeup
  sched/fair: Fix overutilized update in enqueue_task_fair()
2020-11-22 13:26:07 -08:00
Linus Torvalds 48da330589 A single fix for the x86 perf sysfs interfaces which used kobject
attributes instead of device attributes and therefore making Clangs control
 flow integrity checker upset.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+6diATHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaVKD/9pbxJEopP0ojZx8MbGVxPn1dzgii6k
 YgWOemMPGV/hi87pCSah1RcNVY8aMwMUBnzMJEhx9bCYFMxCummM7wcoN7bJneWU
 f548CesgeKP662vFYjAXrsASX0DZAUUQm/MTnkLqVlD11yaqudxKEjEYNi2jVehq
 7tTip8Eb88w5dyQJLN7sjZuV9AdZCiXeiyGgYb3jVjfdfTuq4KRp6XdL9SghEfwV
 3qDOrcBuLKgQbz+eE2C1tVX+/kSNfG1stNAWkENHBWfrnmbeCt7YdT6Gd6bays0b
 1Ul0LgZwXbDdkQrtmoEGtI8j/Q+yiozeJY7+eeh/Z9nw0eviZ8ir36y96wRukOqw
 od+EjENiF1hIJk21r6mIuQoMyezHraIMgg0WF4/YT1XRGqwR1wqgHpmwqMjmem0Y
 Kuab7aYC4g8vGk9ah2/FmTnTHooEyk8GyxnVXO+aSdLbFI04L7HBDILvgvpHPyCS
 BnUDZE785W8yLydhKslfy92kVQGKuGaSqQUQcHD+c/L7m2AexoKrp1RJgA0gXtDj
 ilmE7KNCCbeNXt3cDep6BQzymw9YStPNSPBSv4dK73DM/Y2qKBk3RD0BfMqdCkOy
 sBqUCWRY1/q6Z+64zwDlER5Fn+KflE0ihobTxhA6m0yx7AOn9BoMDWfo3xGKw6Mn
 nhVDpafF8YuVIw==
 =xsma
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fix from Thomas Gleixner:
 "A single fix for the x86 perf sysfs interfaces which used kobject
  attributes instead of device attributes and therefore making clang's
  control flow integrity checker upset"

* tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: fix sysfs type mismatches
2020-11-22 13:23:43 -08:00
Linus Torvalds 855cf1ee47 A single fix for lockdep which makes the recursion protection cover graph
lock/unlock.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+6dQ4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXLiD/91TaQTrgVht6NxF5CmvEpoYPzGg/TO
 MeU7GmgeXv7ciIIDaPONsCLOGjGx5dSxk1QJ5OH+GhJ/lIXbtvbVUgbs7Ezjkl4d
 SyjRHNv3wYV7VJySEgqxo+Rd6fCQN7rOf/J3ZbzPHtMl40qxSpz1FeXTRft7cn62
 pkunRKM+f/tE/Ue96tiHCQVbwRxG3LEPIuXtLJQqtPvgMzb9zhC9mZpUcr5ZJyVD
 BfX69iIs1W1XKql6yH/KuBUY9d3qRzzmhko6a2mMSL3+VX0j4o46LMlP4HRndKTT
 5fEsUC3UOItqn7X4f3HHeQhckEAKXNGEMR30th84CligiEanQuIIHNNKazsnp87A
 GT/XA8RO9+OAd5TRP4CEaFDUR0a0OOZjiw3vW6E77BObi31Se9/EO3Z7XpJC2BSl
 vTsukplOmeilyspQJT7inVgZrtUlF0lpVV5YbMLjtbn5kzLu/75GZN3JagwCmflN
 GKbix/8tnH0KrbizCE8ujUZl+aNjk2TM64mAzOXMlmg+yZ47af31hFs846tCMhv5
 JHXkiMaXpWx3PapgGHM+4PJ1WDGTxm6mUvgAcyCVWgT4gxVXsppnkn0RLdRTGQ50
 C9movzOn1K2fEe7Pp40arG0tm18l9Ukp7mqN1CL+givRKNb61Owybe6qh2qk0IWT
 DAcgdC9h2rdTqQ==
 =dsm4
 -----END PGP SIGNATURE-----

Merge tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fix from Thomas Gleixner:
 "A single fix for lockdep which makes the recursion protection cover
  graph lock/unlock"

* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Put graph lock/unlock under lock_recursion protection
2020-11-22 13:19:53 -08:00
Linus Torvalds 68d3fa235f Couple of EFI fixes for v5.10:
- fix memory leak in efivarfs driver
 - fix HYP mode issue in 32-bit ARM version of the EFI stub when built in
   Thumb2 mode
 - avoid leaking EFI pgd pages on allocation failure
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl+tRcoACgkQwjcgfpV0
 +n1LZQf/af1p9A0zT1nC3IrcaABceJDnD3dJuV9SD6QhFuD2Dw/Mshr+MVzDsO+3
 btvuu0r4CzQ5ajfpfcGcvBFFWbbPTwKvWQe++9Unwoz5acw7hpV5yxNwMivdaJEh
 3o4pkgpCmwtliTwiroDficO7Vlqefqf4LZd7/iQYQTnuPK3waYQBjwp9t2D9tlx7
 kXiEQDP2BDRCUrKEjlR7AHTZ156mw+UsiquAuxMCGTKBqwiELEEV6aPseqa5MmNV
 RDV1IXWdhOQyQfzg0s6vTzwGeN0JubSxHng6O9UbE+tctz4EqaaHIEsRuMBq8oLD
 Y8JeGp1ovypTJxeLE5t6eEzsfvTRsg==
 =GnmM
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI fixes from Borislav Petkov:
 "Forwarded EFI fixes from Ard Biesheuvel:

   - fix memory leak in efivarfs driver

   - fix HYP mode issue in 32-bit ARM version of the EFI stub when built
     in Thumb2 mode

   - avoid leaking EFI pgd pages on allocation failure"

* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Free efi_pgd with free_pages()
  efivarfs: fix memory leak in efivarfs_create()
  efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
2020-11-22 13:05:48 -08:00
Linus Torvalds 7d53be55c9 * An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
same because the proper one is going through the IOMMU tree. (Thomas Gleixner)
 
 * An Intel microcode loader fix to save the correct microcode patch to
   apply during resume. (Chen Yu)
 
 * A fix to not access user memory of other processes when dumping opcode
   bytes. (Thomas Gleixner)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+6QnYACgkQEsHwGGHe
 VUpMgg//cE4GvK7dFihq5iNYS16yKKgyVBLwHiHoCxQkOu4CPSf0EejTMLKPSKpA
 hS7pJm6dMYLJ7PhIKRwlQD1NYet3SHCOi1h0Y2/3rVay82Vz/As2nZRd7paEkP9k
 kiNd/Ib2uAQ9ZwCKhmLanOWDoXXFo5Fwmpw+O/zhn31Y3kBx05mc2ojXnEwCERK/
 j6GwOBkfOq+q6D7HzsfEehlX0iy2rlPSq6OUN1H/Z4w+W9zfpubLX9bhhr9RvDmS
 6Hsmwos8fM/cQXZC2oxoKUP6zeYk5lDF/Qf7hOFt3WgdCpTZP2z6uLwUL6+NXu/C
 Ms+77Cx+Loe8UaDkyxXXruiv7mZIZCnl0phZulE4ibOjzL7W7w5cEf0LHdDS7uDL
 JzZwTJlbK9RjrSp4pXR+rn+U/PdluZJYpjh/Gj8+V23QszvbDsVd55SV5+CLSTM/
 qwrNp5ffLEnIFHmW98/OQKMvNTTzBFdlltnJm7mMW2JucgfCZMx4zwY0+dZ+ocDq
 /Kt/HNCzez1jHWiS5jdZCM15KuIhPTNuTpq0ipU+UAXxZOaNtTo1st1lhKoPvTz/
 k4y7S/EibX6PK4lxBQMM3fBG/T1KK7ZMgNEN0jbhWegqEmdWtgwc57p1gVE70XUU
 f6elyUupD65TMwgio2I8sQuiNBCKfF2Wj144dxXGJnGnOoZKey8=
 =z/Gq
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
   same because the proper one is going through the IOMMU tree (Thomas
   Gleixner)

 - An Intel microcode loader fix to save the correct microcode patch to
   apply during resume (Chen Yu)

 - A fix to not access user memory of other processes when dumping
   opcode bytes (Thomas Gleixner)

* tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"
  x86/dumpstack: Do not try to access user space code of other tasks
  x86/microcode/intel: Check patch signature before saving microcode for early loading
  iommu/vt-d: Take CONFIG_PCI_ATS into account
2020-11-22 12:55:50 -08:00
Linus Torvalds 4a51c60a11 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (madvise, pagemap,
  readahead, memcg, userfaultfd), kbuild, and vfs"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix madvise WILLNEED performance problem
  libfs: fix error cast of negative value in simple_attr_write()
  mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
  mm: memcg/slab: fix root memcg vmstats
  mm: fix readahead_page_batch for retry entries
  mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
  compiler-clang: remove version check for BPF Tracing
  mm/madvise: fix memory leak from process_madvise
2020-11-22 12:14:46 -08:00
Linus Torvalds d27637ece8 Staging/IIO fixes for 5.10-rc5
Here are some small Staging and IIO driver fixes for 5.10-rc5.  They
 include:
 	- IIO fixes for reported regressions and problems
 	- new device ids for IIO drivers
 	- new device id for rtl8723bs driver
 	- staging ralink driver Kconfig dependency fix
 	- staging mt7621-pci bus resource fix
 
 All of these have been in linux-next all week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7pN0A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymnAACgrCPVrnWr2mblmLhBWYpq3LjLri0AoIsYd7FG
 138ClPlHDOjNTzKQaF5Q
 =YLIp
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information
2020-11-22 11:58:49 -08:00
Linus Torvalds de75803570 TTY fixes for 5.10-rc5
Here are some small tty/serial fixes for 5.10-rc5 that resolve some
 reported issues:
 	- speakup crash when telling the kernel to use a device that
 	  isn't really there
 	- imx serial driver fixes for reported problems
 	- ar933x_uart driver fix for probe error handling path
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7pOWQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynoYACeL51JkQiL72sGLe8T+nuMzKptckEAniCgLHb0
 0IBcBzMM/PgpqmOIQRRE
 =CDRI
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty fixes from Greg KH:
 "Here are some small tty/serial fixes for 5.10-rc5 that resolve some
  reported issues:

   - speakup crash when telling the kernel to use a device that isn't
     really there

   - imx serial driver fixes for reported problems

   - ar933x_uart driver fix for probe error handling path

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: ar933x_uart: disable clk on error handling path in probe
  tty: serial: imx: keep console clocks always on
  speakup: Do not let the line discipline be used several times
  tty: serial: imx: fix potential deadlock
2020-11-22 11:52:10 -08:00
Linus Torvalds a7f07fc14f A final set of miscellaneous bug fixes for ext4
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+6tkoACgkQ8vlZVpUN
 gaO1xgf/aJ5chEWFEQVrdSdd+cvhuILz1Hp2iW8xdZgPeN2ovWIC3LPCTDr9FWB0
 MhpGS9avYIf8mHZgsw7HVzqUv6gPcT0khragPp348QJzxnbz/saZ5ujK/WR2zJxr
 SoB9f2vdqW0gBbKMO6avXm0gTnuNemcK5oH6tzI5ECBpV3Ltk1dJWtgQkVp9rAyP
 EFEb9hUYpdZ3J1cm8SCUIO99Tu2KMd+yNRv42z0BKNTfBNe2P5aG56p1sMYMcIr7
 BiVUrhPkbAf3gMsMDzZQE5mHZHyzJoHNHssLHWcEU/o9Wd2wZHjAEzzn9Tz49rUg
 yhYTrhLcQJcfmL0XvgrIhJaXTfMc6w==
 =s/1A
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "A final set of miscellaneous bug fixes for ext4"

* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix bogus warning in ext4_update_dx_flag()
  jbd2: fix kernel-doc markups
  ext4: drop fast_commit from /proc/mounts
2020-11-22 11:39:32 -08:00
David Howells a9e5c87ca7 afs: Fix speculative status fetch going out of order wrt to modifications
When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.

To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).

When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.

A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes.  What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.

This results in something like the following being seen in dmesg:

	kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus

showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification.  This was causing the cache to be
invalidated for that vnode when it shouldn't have been.  If it happens
on a data file, this might lead to local changes being lost.

Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.

Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway.  It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.

Fixes: 5cf9dd55a0 ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 11:27:03 -08:00
Matthew Wilcox (Oracle) 66383800df mm: fix madvise WILLNEED performance problem
The calculation of the end page index was incorrect, leading to a
regression of 70% when running stress-ng.

With this fix, we instead see a performance improvement of 3%.

Fixes: e6e88712e4 ("mm: optimise madvise WILLNEED")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/20201109134851.29692-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Yicong Yang 488dac0c92 libfs: fix error cast of negative value in simple_attr_write()
The attr->set() receive a value of u64, but simple_strtoll() is used for
doing the conversion.  It will lead to the error cast if user inputs a
negative value.

Use kstrtoull() instead of simple_strtoll() to convert a string got from
the user to an unsigned value.  The former will return '-EINVAL' if it
gets a negetive value, but the latter can't handle the situation
correctly.  Make 'val' unsigned long long as what kstrtoull() takes,
this will eliminate the compile warning on no 64-bit architectures.

Fixes: f7b88631a8 ("fs/libfs.c: fix simple_attr_write() on 32bit machines")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/1605341356-11872-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Gerald Schaefer bfe8cc1db0 mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
Alexander reported a syzkaller / KASAN finding on s390, see below for
complete output.

In do_huge_pmd_anonymous_page(), the pre-allocated pagetable will be
freed in some cases.  In the case of userfaultfd_missing(), this will
happen after calling handle_userfault(), which might have released the
mmap_lock.  Therefore, the following pte_free(vma->vm_mm, pgtable) will
access an unstable vma->vm_mm, which could have been freed or re-used
already.

For all architectures other than s390 this will go w/o any negative
impact, because pte_free() simply frees the page and ignores the
passed-in mm.  The implementation for SPARC32 would also access
mm->page_table_lock for pte_free(), but there is no THP support in
SPARC32, so the buggy code path will not be used there.

For s390, the mm->context.pgtable_list is being used to maintain the 2K
pagetable fragments, and operating on an already freed or even re-used
mm could result in various more or less subtle bugs due to list /
pagetable corruption.

Fix this by calling pte_free() before handle_userfault(), similar to how
it is already done in __do_huge_pmd_anonymous_page() for the WRITE /
non-huge_zero_page case.

Commit 6b251fc96c ("userfaultfd: call handle_userfault() for
userfaultfd_missing() faults") actually introduced both, the
do_huge_pmd_anonymous_page() and also __do_huge_pmd_anonymous_page()
changes wrt to calling handle_userfault(), but only in the latter case
it put the pte_free() before calling handle_userfault().

  BUG: KASAN: use-after-free in do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
  Read of size 8 at addr 00000000962d6988 by task syz-executor.0/9334

  CPU: 1 PID: 9334 Comm: syz-executor.0 Not tainted 5.10.0-rc1-syzkaller-07083-g4c9720875573 #0
  Hardware name: IBM 3906 M04 701 (KVM/Linux)
  Call Trace:
    do_huge_pmd_anonymous_page+0xcda/0xd90 mm/huge_memory.c:744
    create_huge_pmd mm/memory.c:4256 [inline]
    __handle_mm_fault+0xe6e/0x1068 mm/memory.c:4480
    handle_mm_fault+0x288/0x748 mm/memory.c:4607
    do_exception+0x394/0xae0 arch/s390/mm/fault.c:479
    do_dat_exception+0x34/0x80 arch/s390/mm/fault.c:567
    pgm_check_handler+0x1da/0x22c arch/s390/kernel/entry.S:706
    copy_from_user_mvcos arch/s390/lib/uaccess.c:111 [inline]
    raw_copy_from_user+0x3a/0x88 arch/s390/lib/uaccess.c:174
    _copy_from_user+0x48/0xa8 lib/usercopy.c:16
    copy_from_user include/linux/uaccess.h:192 [inline]
    __do_sys_sigaltstack kernel/signal.c:4064 [inline]
    __s390x_sys_sigaltstack+0xc8/0x240 kernel/signal.c:4060
    system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

  Allocated by task 9334:
    slab_alloc_node mm/slub.c:2891 [inline]
    slab_alloc mm/slub.c:2899 [inline]
    kmem_cache_alloc+0x118/0x348 mm/slub.c:2904
    vm_area_dup+0x9c/0x2b8 kernel/fork.c:356
    __split_vma+0xba/0x560 mm/mmap.c:2742
    split_vma+0xca/0x108 mm/mmap.c:2800
    mlock_fixup+0x4ae/0x600 mm/mlock.c:550
    apply_vma_lock_flags+0x2c6/0x398 mm/mlock.c:619
    do_mlock+0x1aa/0x718 mm/mlock.c:711
    __do_sys_mlock2 mm/mlock.c:738 [inline]
    __s390x_sys_mlock2+0x86/0xa8 mm/mlock.c:728
    system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

  Freed by task 9333:
    slab_free mm/slub.c:3142 [inline]
    kmem_cache_free+0x7c/0x4b8 mm/slub.c:3158
    __vma_adjust+0x7b2/0x2508 mm/mmap.c:960
    vma_merge+0x87e/0xce0 mm/mmap.c:1209
    userfaultfd_release+0x412/0x6b8 fs/userfaultfd.c:868
    __fput+0x22c/0x7a8 fs/file_table.c:281
    task_work_run+0x200/0x320 kernel/task_work.c:151
    tracehook_notify_resume include/linux/tracehook.h:188 [inline]
    do_notify_resume+0x100/0x148 arch/s390/kernel/signal.c:538
    system_call+0xe6/0x28c arch/s390/kernel/entry.S:416

  The buggy address belongs to the object at 00000000962d6948 which belongs to the cache vm_area_struct of size 200
  The buggy address is located 64 bytes inside of 200-byte region [00000000962d6948, 00000000962d6a10)
  The buggy address belongs to the page: page:00000000313a09fe refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x962d6 flags: 0x3ffff00000000200(slab)
  raw: 3ffff00000000200 000040000257e080 0000000c0000000c 000000008020ba00
  raw: 0000000000000000 000f001e00000000 ffffffff00000001 0000000096959501
  page dumped because: kasan: bad access detected
  page->mem_cgroup:0000000096959501

  Memory state around the buggy address:
   00000000962d6880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00000000962d6900: 00 fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb
  >00000000962d6980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                        ^
   00000000962d6a00: fb fb fc fc fc fc fc fc fc fc 00 00 00 00 00 00
   00000000962d6a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================

Fixes: 6b251fc96c ("userfaultfd: call handle_userfault() for userfaultfd_missing() faults")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>	[4.3+]
Link: https://lkml.kernel.org/r/20201110190329.11920-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Muchun Song 8faeb1ffd7 mm: memcg/slab: fix root memcg vmstats
If we reparent the slab objects to the root memcg, when we free the slab
object, we need to update the per-memcg vmstats to keep it correct for
the root memcg.  Now this at least affects the vmstat of
NR_KERNEL_STACK_KB for !CONFIG_VMAP_STACK when the thread stack size is
smaller than the PAGE_SIZE.

David said:
 "I assume that without this fix that the root memcg's vmstat would
  always be inflated if we reparented"

Fixes: ec9f02384f ("mm: workingset: fix vmstat counters for shadow nodes")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: <stable@vger.kernel.org>	[5.3+]
Link: https://lkml.kernel.org/r/20201110031015.15715-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Matthew Wilcox (Oracle) 4349a83a31 mm: fix readahead_page_batch for retry entries
Both btrfs and fuse have reported faults caused by seeing a retry entry
instead of the page they were looking for.  This was caused by a missing
check in the iterator.

As can be seen in the below panic log, the accessing 0x402 causes a
panic.  In the xarray.h, 0x402 means RETRY_ENTRY.

  BUG: kernel NULL pointer dereference, address: 0000000000000402
  CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1
  Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020
  RIP: 0010:fuse_readahead+0x152/0x470 [fuse]
  Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01
  RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246
  RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60
  RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0
  R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68
  FS:  00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0
  Call Trace:
    read_pages+0x83/0x270
    page_cache_readahead_unbounded+0x197/0x230
    generic_file_buffered_read+0x57a/0xa20
    new_sync_read+0x112/0x1a0
    vfs_read+0xf8/0x180
    ksys_read+0x5f/0xe0
    do_syscall_64+0x33/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 042124cc64 ("mm: add new readahead_control API")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Dan Williams a927bd6ba9 mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid().  That
symbol is exported for modules.  However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:

	CONFIG_NUMA_KEEP_MEMINFO=y
	CONFIG_MEMORY_HOTPLUG=y

...and:

	CONFIG_NUMA_KEEP_MEMINFO=n
	CONFIG_MEMORY_HOTPLUG=y

...it failed to export the symbol in the case of:

	CONFIG_NUMA_KEEP_MEMINFO=y
	CONFIG_MEMORY_HOTPLUG=n

Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.

Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols.  Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.

The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h.  In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h.  An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.

The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.

[dan.j.williams@intel.com: v4]
  Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
  Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com

Fixes: a035b6bf86 ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Nick Desaulniers bc2dc4406c compiler-clang: remove version check for BPF Tracing
bpftrace parses the kernel headers and uses Clang under the hood.

Remove the version check when __BPF_TRACING__ is defined (as bpftrace
does) so that this tool can continue to parse kernel headers, even with
older clang sources.

Fixes: commit 1f7a44f63e ("compiler-clang: add build check for clang 10.0.1")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Reported-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lkml.kernel.org/r/20201104191052.390657-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Eric Dumazet 450677dcb0 mm/madvise: fix memory leak from process_madvise
The early return in process_madvise() will produce a memory leak.

Fix it.

Fixes: ecb8ac8b1f ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201116155132.GA3805951@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Linus Torvalds a349e4c659 Fixes for 5.10-rc5:
- Fix various deficiencies in online fsck's metadata checking code.
 - Fix an integer casting bug in the xattr code on 32-bit systems.
 - Fix a hang in an inode walk when the inode index is corrupt.
 - Fix error codes being dropped when initializing per-AG structures
 - Fix nowait directio writes that partially succeed but return EAGAIN.
 - Revert last week's rmap comparison patch because it was wrong.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl+38UwACgkQ+H93GTRK
 tOtMFQ/9EV2/I673TJj8GY5gJE9mUXGbiUyMedl8XammhNPL0JZMAGsnMXBWCtjO
 0pmO+TS4epwlYpZ4XVLlxNUxUwDkxgq3nHKbEz2jezepKPTCasL7XZOECGQ1gKdA
 11BRNP7Y91ndYtVZGxHu+92oeZAzJgTh6OVYtJytniTgF9r96hgr/+3dA8GQxkqm
 bkkfWfKxxCwMYLRLRNcnVbkj0xDMgmKOILyFR63ZhW8RtrfmdIUYDUty7RGvj4bJ
 csZmrkcu/wIj+9NeXw8KS5KpNOWu2q3baORXe6EodoVgFMa4I11kiuGucZehsIbH
 yNgTLDaFNUm1aBCkSrYtz7m4iwLq8No7XB/OIXrALSd5yJqaXhDyMnEV/tBeAL7D
 MXn032Sc6hPSyGBtCmurTSo61oKP3HjgMXA4vvNw5CxJ7Q4EoZyBXCdHtZcRnB7+
 MSa+ylBTbmP/AJ2AQrPiArGlAKUTnJM6WknIBCWiIueRtadTh1cquBFVbDxoEIX5
 eKcjdQrX2xNrFNE2rRuYI4ml+wwtdgk7JO41gjAw+NA2V1LJW6Q5A5RKX2PiOidC
 oGdNPTLG7Rfh7sMaPo66X3xTQPoOwcV0O+ArXlFNDBZXDUw0d1tWzVfYo+/2Zym6
 3sFcTKMdTKtG8NasNjvbanmZTV1VLbZAJRdevH1NFAWUICiTBkY=
 =HoPI
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.10-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "The critical fixes are for a crash that someone reported in the xattr
  code on 32-bit arm last week; and a revert of the rmap key comparison
  change from last week as it was totally wrong. I need a vacation. :(

  Summary:

   - Fix various deficiencies in online fsck's metadata checking code

   - Fix an integer casting bug in the xattr code on 32-bit systems

   - Fix a hang in an inode walk when the inode index is corrupt

   - Fix error codes being dropped when initializing per-AG structures

   - Fix nowait directio writes that partially succeed but return EAGAIN

   - Revert last week's rmap comparison patch because it was wrong"

* tag 'xfs-5.10-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: revert "xfs: fix rmap key and record comparison functions"
  xfs: don't allow NOWAIT DIO across extent boundaries
  xfs: return corresponding errcode if xfs_initialize_perag() fail
  xfs: ensure inobt record walks always make forward progress
  xfs: fix forkoff miscalculation related to XFS_LITINO(mp)
  xfs: directory scrub should check the null bestfree entries too
  xfs: strengthen rmap record flags checking
  xfs: fix the minrecs logic when dealing with inode root child blocks
2020-11-21 10:36:25 -08:00
Linus Torvalds ba911108f4 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl+4JHgACgkQnJ2qBz9k
 QNlXOQf/YHs4q4HgBI0tsStS/U4xFtmY77Rcm1pllqH6BZPBg1vRpzfh7hZvIPMa
 GceTcMAX4OmG6++fRzVgNDIuem3Jl0oDCm++pWPev+S/V06PuTu36viuFWJ3e/5g
 0wDLYXRj4dRUiQtjbSkI7LAgIX1wbTANOKSZeaKFYaGHfEcFm1GkHUuHzEBVX1Jw
 bRpaod3ikmjoaoI6TTZlKKnrKksSw6F5wHUiHu2ZHdZ6kQ36elwHFu8QXJCzkZ7F
 F9vt4IIKq6xzEVdwDXAPjsFkPp2B4Bz+AgcSpoitg/2L5hc2d/kxgI4zvpXY8TGs
 hpW6YPXEXIjhHjKX22f99ThI4BqXww==
 =bBTT
 -----END PGP SIGNATURE-----

Merge tag 'fsnotify_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull fanotify fix from Jan Kara:
 "A single fanotify fix from Amir"

* tag 'fsnotify_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: fix logic of reporting name info with watched parent
2020-11-21 10:33:33 -08:00
Linus Torvalds ea0ab64306 seccomp fixes for v5.10-rc5
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
 
 - Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël Salaün)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl+4FQgACgkQiXL039xt
 wCYERA/8Cwb8p8PWbtOq6uUKsZ4kJQuMZee3crP+LM0B1a427hOCSuezoDtOY1wO
 N7IEOr3ipHxoxZ1Zf2Ln4lGyktxlwzA8pqlGZyqR5zFIl+0HArbXdAfcRMcaeqUp
 eSV30CNBD5XfGLc2R5s1qHnrshVBJFebCpgMfSCOQQWMpZ51nnaoFN8N8iSEx6PN
 kYHC1C1WX5g3vtKo29xS2Y7KCThMOXvcNI7eFpVD0C4ZwEr8lywbTTzBBhXUIGBX
 6NoNOV7kVxIjNLQ8x17F1OacrC6h4ZzNTl4MEYnMZ/Mw0NVB3MvoHQohwW+Y98Rf
 97sPQPZjYeJ6xURolRsWX+kvXC7PyLYvfldsQi00QDfdc6RGu0pnsG4UuivsldlY
 OhswE9Q/KKHmzXiHnZBmcw4NcSyhZiL3LYB1VZl3jDobeOhVKyHw72vo8Zrhhz8A
 ksCDg3vNvOo/x2iH9GSUG4Fjk8coXRif8P6lH5Btw6V+x9ZlFiaW5WbSbP0G3PzJ
 zS5nPu8PE6Sm70XlRn0BbRmIjV9AhEZqNNZoOsndrbR86klH6WolyCB4ifj2MKuR
 ZwbeDblUrYyRne/Ll9XGQVDSFv8J5phxtDQM0phiGK0jOsvXqbl8RvlckCKqBwm0
 7VgtEumU5vJTx01avrXw86Sj7B2IR4M1nTgpwWJ2EVs9U98Emew=
 =1Mse
 -----END PGP SIGNATURE-----

Merge tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull seccomp fixes from Kees Cook:
 "This gets the seccomp selftests running again on powerpc and sh, and
  fixes an audit reporting oversight noticed in both seccomp and ptrace.

   - Fix typos in seccomp selftests on powerpc and sh (Kees Cook)

   - Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
     Salaün)"

* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: sh: Fix register names
  selftests/seccomp: powerpc: Fix typo in macro variable name
  seccomp: Set PF_SUPERPRIV when checking capability
  ptrace: Set PF_SUPERPRIV when checking capability
2020-11-21 10:24:05 -08:00
Linus Torvalds 27bba9c532 SCSI fixes on 20201120
Fixes for two fairly obscure but annoying when triggered races in
 iSCSI.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX7gmiiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcJeAP4v9I6j
 fh/0E3tU+Hb8ZerNoD8p2q7vdxeKkihXWw5/EwEA2SoFW6VNTrJdhUq1+hJ1QWOR
 Awrex3uy1m11ETLgIcM=
 =A1lM
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Fixes for two fairly obscure but annoying when triggered races in
  iSCSI"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: iscsi: Fix cmd abort fabric stop race
  scsi: libiscsi: Fix NOP race condition
2020-11-20 16:24:28 -08:00
Linus Torvalds 4fd84bc969 block-5.10-2020-11-20
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+4C/oQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpnlQD/40VMzxToudShz6bHyYYaJnA9TDEklQ/aUM
 rW5dyUthc7jap7bv5Yy6hRcoqXCjy77+3hBZ536q9XyX+jFZ/q34XqwHBOJ4tBwZ
 teBACT+sLxB3n41B/AecSvcG40GfINHyIONIeWc4JQmB5IqX4eX3PMIp+rsN+6yx
 IILnkZg9XULZ/IS48GBo8lgxaJHTU0qcOa20YZ3F9yY+/EsROwcy4ClyM+VUcoXe
 3jmXpYm/MucH4YIFPv0BhQI2TVQYzo2VK11YF6JgcDAJk15NNRjglCGesUwSfreZ
 45KdeXmReS5zKeJ9kSna1ifAwT7C7ag2EjHXUaDIhnqSKoClCuevv8cXb+0sk88X
 T3fifR0JKCrVcn2z8QTAVUJU9mq7+fTsj7HdwV/yuhonpiu61p1NlgThLQmamA9N
 Cm2yam/VdND6w7i5ZbR4pxDo7YAWg48WRZ5YOYPcHsXhqv6sxdrgxyX0ufK8CJaz
 ZDxcFKpG8LTjpKFhz/A5fDp06CdYWngCjE4+3ATFhNTo04pSNJ/3warPR+4n0Lb8
 KEMe+lgrwX9nQY65XPFFO5S/K1upzOmFpJQ6R6+NYJUS94IE/5pNUwSCa/kX07x4
 nniUUq6WkOR276K427iZVChUp2yc4bGTMJrZHd4Rs9OqD6IF7qhJM2G1YGrgPup6
 8pb9tB/5Tw==
 =v5pS
 -----END PGP SIGNATURE-----

Merge tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
      - Doorbell Buffer freeing fix (Minwoo Im)
      - CSE log leak fix (Keith Busch)

 - blk-cgroup hd_struct leak fix (Christoph)

 - Flush request state fix (Ming)

 - dasd NULL deref fix (Stefan)

* tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block:
  s390/dasd: fix null pointer dereference for ERP requests
  blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostats
  nvme: fix memory leak freeing command effects
  nvme: directly cache command effects log
  nvme: free sq/cq dbbuf pointers when dbbuf set fails
  block: mark flush request as IDLE when it is really finished
2020-11-20 12:03:40 -08:00
Linus Torvalds fa5fca78bb io_uring-5.10-2020-11-20
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+4DAwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgphdOD/9xOEnYPuekvVH9G9nyNd//Q9fPArG2+j6V
 /MCnze07GNtDt7z15oR+T07hKXmf+Ejh4nu3JJ6MUNfe/47hhJqHSxRHU6+PJCjk
 hPrsaTsDedxxLEDiLmvhXnUPzfVzJtefxVAAaKikWOb3SBqLdh7xTFSlor1HbRBl
 Zk4d343cjBDYfvSSt/zMWDzwwvramdz7rJnnPMKXITu64ITL5314vuK2YVZmBOet
 YujSah7J8FL1jKhiG1Iw5rayd2Q3smnHWIEQ+lvW6WiTvMJMLOxif2xNF4/VEZs1
 CBGJUQt42LI6QGEzRBHohcefZFuPGoxnduSzHCOIhh7d6+k+y9mZfsPGohr3g9Ov
 NotXpVonnA7GbRqzo1+IfBRve7iRONdZ3/LBwyRmqav4I4jX68wXBNH5IDpVR0Sn
 c31avxa/ZL7iLIBx32enp0/r3mqNTQotEleSLUdyJQXAZTyG2INRhjLLXTqSQ5BX
 oVp0fZzKCwsr6HCPZpXZ/f2G7dhzuF0ghoceC02GsOVooni22gdVnQj+AWNus398
 e+wcimT4MX6AHNFxO2aUtJow0KWWZRzC1p5Mxu/9W3YiMtJiC0YOGePfSqiTqX0g
 Uk0H5dOAgBUQrAsusf7bKr0K6W25yEk/JipxhWqi0rC71x42mLTsCT1wxSCvLwqs
 WxhdtVKroQ==
 =7PAe
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.10-2020-11-20' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Mostly regression or stable fodder:

   - Disallow async path resolution of /proc/self

   - Tighten constraints for segmented async buffered reads

   - Fix double completion for a retry error case

   - Fix for fixed file life times (Pavel)"

* tag 'io_uring-5.10-2020-11-20' of git://git.kernel.dk/linux-block:
  io_uring: order refnode recycling
  io_uring: get an active ref_node from files_data
  io_uring: don't double complete failed reissue request
  mm: never attempt async page lock if we've transferred data already
  io_uring: handle -EOPNOTSUPP on path resolution
  proc: don't allow async path resolution of /proc/self components
2020-11-20 11:47:22 -08:00