We dereference r10_bio->read_slot too many times in fix_read_error().
Optimize it by using a variable to store read_slot.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230623173236.2513554-2-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
New disk should be added to "removed" position first instead of to be a
replacement. Commit 6090368abc ("md/raid10: prioritize adding disk to
'removed' mirror") has fixed this issue for raid10. Fix it for raid1 now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230627014332.3810102-1-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
use md_account_bio() to enable io accounting, also make sure
mddev_suspend() will wait for all io to be done.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-9-yukuai1@huaweicloud.com
use md_account_bio() to enable io accounting, also make sure
mddev_suspend() will wait for all io to be done.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-8-yukuai1@huaweicloud.com
use md_account_bio() to enable io accounting, also make sure
mddev_suspend() will wait for all io to be done.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-7-yukuai1@huaweicloud.com
Make sure that 'active_io' will represent inflight io instead of io that
is dispatching, and io accounting from all levels will be consistent.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-6-yukuai1@huaweicloud.com
Two problems can be fixed this way:
1) 'active_io' will represent inflight io instead of io that is
dispatching.
2) If io accounting is enabled or disabled while io is still inflight,
bio_start_io_acct() and bio_end_io_acct() is not balanced and io
inflight counter will be leaked.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-5-yukuai1@huaweicloud.com
Io will only be accounted as done from raid5_align_endio() if the io
succeeded, and io inflight counter will be leaked if such io failed.
Fix this problem by switching to use md_account_bio() for io accounting.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-4-yukuai1@huaweicloud.com
Currently, 'active_io' is grabbed before make_reqeust() is called, and
it's dropped immediately make_reqeust() returns. Hence 'active_io'
actually means io is dispatching, not io is inflight.
For raid0 and raid456 that io accounting is enabled, 'active_io' will
also be grabbed when bio is cloned for io accounting, and this 'active_io'
is dropped until io is done.
Always clone new bio so that 'active_io' will mean that io is inflight,
raid1 and raid10 will switch to use this method in later patches.
Now that bio will be cloned even if io accounting is disabled, also
rename related structure from '*_acct_*' to '*_clone_*'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-3-yukuai1@huaweicloud.com
'io_acct_set' is only used for raid0 and raid456, prepare to use it for
raid1 and raid10, so that io accounting from different levels can be
consistent.
By the way, follow up patches will also use this io clone mechanism to
make sure 'active_io' represents in flight io, not io that is dispatching,
so that mddev_suspend will wait for io to be done as designed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-2-yukuai1@huaweicloud.com
The support for bitmaps on files is a very bad idea abusing various kernel
APIs, and fundamentally requires the file to not be on the actual array
without a way to check that this is actually the case. Add a deprecation
warning to see if we might be able to eventually drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-12-hch@lst.de
The support for write intent bitmaps in files on an external files in md
is a hot mess that abuses ->bmap to map file offsets into physical device
objects, and also abuses buffer_heads in a creative way.
Make this code optional so that MD can be built into future kernels
without buffer_head support, and so that we can eventually deprecate it.
Note this does not affect the internal bitmap support, which has none of
the problems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-11-hch@lst.de
The md driver allocates pages for storing the bitmap file data, which
are not page cache pages, and then stores the page granularity file
offset in page->index, which is a field that isn't really valid except
for page cache pages.
Use a separate index for the superblock, and use the scheme used at
read size to recalculate the index for the bitmap pages instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-10-hch@lst.de
Diretly apply mddev->bitmap_info.offset to the sector number to read
instead of doing that in both callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-9-hch@lst.de
Convert read_sb_page to the normal kernel coding style, calculate the
target sector only once, and add a local iosize variable to make the call
to sync_page_io more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-8-hch@lst.de
Split the confusing loop in md_bitmap_init_from_disk that iterates over
all chunks but also needs to read and map the pages into three separate
loops: one that iterates over the pages to read them, a second optional
one to iterate over the pages to mark them invalid if the bitmaps are
out of date, and a final one that actually iterates over the chunks.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306160552.smw0qbmb-lkp@intel.com/
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-7-hch@lst.de
Make the difference to read_sb_page clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-6-hch@lst.de
Split the file write code out of write_page into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-5-hch@lst.de
Don't bother allocating an extra buffer in the I/O failure handler and
instead use the printk built-in format to print the last 4 path name
components.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-4-hch@lst.de
Just a small tidyup to prepare for bigger changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-3-hch@lst.de
Set BITMAP_WRITE_ERROR directly in write_sb_page instead of propagating
the error to the caller and setting it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-2-hch@lst.de
For md_check_recovery():
1) if 'MD_RECOVERY_RUNING' is not set, register new sync_thread.
2) if 'MD_RECOVERY_RUNING' is set:
a) if 'MD_RECOVERY_DONE' is not set, don't do anything, wait for
md_do_sync() to be done.
b) if 'MD_RECOVERY_DONE' is set, unregister sync_thread. Current code
expects that sync_thread is not NULL, otherwise new sync_thread will
be registered, which will corrupt the array.
Make sure md_check_recovery() won't register new sync_thread if
'MD_RECOVERY_RUNING' is still set, and a new WARN_ON_ONCE() is added for
the above corruption,
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-7-yukuai1@huaweicloud.com
md_reap_sync_thread() is just replaced with wait_event(resync_wait, ...)
from action_store(), just make sure action_store() will still wait for
everything to be done in md_reap_sync_thread().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-6-yukuai1@huaweicloud.com
Our test found a following deadlock in raid10:
1) Issue a normal write, and such write failed:
raid10_end_write_request
set_bit(R10BIO_WriteError, &r10_bio->state)
one_write_done
reschedule_retry
// later from md thread
raid10d
handle_write_completed
list_add(&r10_bio->retry_list, &conf->bio_end_io_list)
// later from md thread
raid10d
if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
list_move(conf->bio_end_io_list.prev, &tmp)
r10_bio = list_first_entry(&tmp, struct r10bio, retry_list)
raid_end_bio_io(r10_bio)
Dependency chain 1: normal io is waiting for updating superblock
2) Trigger a recovery:
raid10_sync_request
raise_barrier
Dependency chain 2: sync thread is waiting for normal io
3) echo idle/frozen to sync_action:
action_store
mddev_lock
md_unregister_thread
kthread_stop
Dependency chain 3: drop 'reconfig_mutex' is waiting for sync thread
4) md thread can't update superblock:
raid10d
md_check_recovery
if (mddev_trylock(mddev))
md_update_sb
Dependency chain 4: update superblock is waiting for 'reconfig_mutex'
Hence cyclic dependency exist, in order to fix the problem, we must
break one of them. Dependency 1 and 2 can't be broken because they are
foundation design. Dependency 4 may be possible if it can be guaranteed
that no io can be inflight, however, this requires a new mechanism which
seems complex. Dependency 3 is a good choice, because idle/frozen only
requires sync thread to finish, which can be done asynchronously that is
already implemented, and 'reconfig_mutex' is not needed anymore.
This patch switch 'idle' and 'frozen' to wait sync thread to be done
asynchronously, and this patch also add a sequence counter to record how
many times sync thread is done, so that 'idle' won't keep waiting on new
started sync thread.
Noted that raid456 has similiar deadlock([1]), and it's verified[2] this
deadlock can be fixed by this patch as well.
[1] https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t
[2] https://lore.kernel.org/linux-raid/e9067438-d713-f5f3-0d3d-9e6b0e9efa0e@huaweicloud.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-5-yukuai1@huaweicloud.com
Currently, for idle and frozen, action_store will hold 'reconfig_mutex'
and call md_reap_sync_thread() to stop sync thread, however, this will
cause deadlock (explained in the next patch). In order to fix the
problem, following patch will release 'reconfig_mutex' and wait on
'resync_wait', like md_set_readonly() and do_md_stop() does.
Consider that action_store() will set/clear 'MD_RECOVERY_FROZEN'
unconditionally, which might cause unexpected problems, for example,
frozen just set 'MD_RECOVERY_FROZEN' and is still in progress, while
'idle' clear 'MD_RECOVERY_FROZEN' and new sync thread is started, which
might starve in progress frozen. A mutex is added to synchronize idle
and frozen from action_store().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-4-yukuai1@huaweicloud.com
Prepare to handle 'idle' and 'frozen' differently to fix a deadlock, there
are no functional changes except that MD_RECOVERY_RUNNING is checked
again after 'reconfig_mutex' is held.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-3-yukuai1@huaweicloud.com
This reverts commit 9dfbdafda3.
Because it will introduce a defect that sync_thread can be running while
MD_RECOVERY_RUNNING is cleared, which will cause some unexpected problems,
for example:
list_add corruption. prev->next should be next (ffff0001ac1daba0), but was ffff0000ce1a02a0. (prev=ffff0000ce1a02a0).
Call trace:
__list_add_valid+0xfc/0x140
insert_work+0x78/0x1a0
__queue_work+0x500/0xcf4
queue_work_on+0xe8/0x12c
md_check_recovery+0xa34/0xf30
raid10d+0xb8/0x900 [raid10]
md_thread+0x16c/0x2cc
kthread+0x1a4/0x1ec
ret_from_fork+0x10/0x18
This is because work is requeued while it's still inside workqueue:
t1: t2:
action_store
mddev_lock
if (mddev->sync_thread)
mddev_unlock
md_unregister_thread
// first sync_thread is done
md_check_recovery
mddev_try_lock
/*
* once MD_RECOVERY_DONE is set, new sync_thread
* can start.
*/
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery)
INIT_WORK(&mddev->del_work, md_start_sync)
queue_work(md_misc_wq, &mddev->del_work)
test_and_set_bit(WORK_STRUCT_PENDING_BIT, ...)
// set pending bit
insert_work
list_add_tail
mddev_unlock
mddev_lock_nointr
md_reap_sync_thread
// MD_RECOVERY_RUNNING is cleared
mddev_unlock
t3:
// before queued work started from t2
md_check_recovery
// MD_RECOVERY_RUNNING is not set, a new sync_thread can be started
INIT_WORK(&mddev->del_work, md_start_sync)
work->data = 0
// work pending bit is cleared
queue_work(md_misc_wq, &mddev->del_work)
insert_work
list_add_tail
// list is corrupted
The above commit is reverted to fix the problem, the deadlock this
commit tries to fix will be fixed in following patches.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-2-yukuai1@huaweicloud.com
If a problem occurs in the process of creating an integrity payload, the
status of bio is always BLK_STS_RESOURCE.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230725051839epcms2p8e4d20ad6c51326ad032e8406f59d0aaa@epcms2p8
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_run_queue() runs the queue asynchronously if BLK_MQ_F_BLOCKING
has been set. This is suboptimal since running the queue asynchronously
is slower than running the queue synchronously. This patch modifies
blk_mq_run_queue() as follows if BLK_MQ_F_BLOCKING has been set:
- Run the queue synchronously if it is allowed to sleep.
- Run the queue asynchronously if it is not allowed to sleep.
Additionally, blk_mq_run_hw_queue(hctx, false) calls are modified into
blk_mq_run_hw_queue(hctx, hctx->flags & BLK_MQ_F_BLOCKING) if the caller
may be invoked from atomic context.
The following caller chains have been reviewed:
blk_mq_run_hw_queue(hctx, false)
blk_mq_get_tag() /* may sleep, hence the functions it calls may also sleep */
blk_execute_rq() /* may sleep */
blk_mq_run_hw_queues(q, async=false)
blk_freeze_queue_start() /* may sleep */
blk_mq_requeue_work() /* may sleep */
scsi_kick_queue()
scsi_requeue_run_queue() /* may sleep */
scsi_run_host_queues()
scsi_ioctl_reset() /* may sleep */
blk_mq_insert_requests(hctx, ctx, list, run_queue_async=false)
blk_mq_dispatch_plug_list(plug, from_sched=false)
blk_mq_flush_plug_list(plug, from_schedule=false)
__blk_flush_plug(plug, from_schedule=false)
blk_add_rq_to_plug()
blk_mq_submit_bio() /* may sleep if REQ_NOWAIT has not been set */
blk_mq_plug_issue_direct()
blk_mq_flush_plug_list() /* see above */
blk_mq_dispatch_plug_list(plug, from_sched=false)
blk_mq_flush_plug_list() /* see above */
blk_mq_try_issue_directly()
blk_mq_submit_bio() /* may sleep if REQ_NOWAIT has not been set */
blk_mq_try_issue_list_directly(hctx, list)
blk_mq_insert_requests() /* see above */
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230721172731.955724-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_kick_requeue_list() calls blk_mq_run_hw_queues() asynchronously.
Leave out the direct blk_mq_run_hw_queues() call. This patch causes
scsi_run_queue() to call blk_mq_run_hw_queues() asynchronously instead
of synchronously. Since scsi_run_queue() is not called from the hot I/O
submission path, this patch does not affect the hot path.
This patch prepares for allowing blk_mq_run_hw_queue() to sleep if
BLK_MQ_F_BLOCKING has been set. scsi_run_queue() may be called from
atomic context and must not sleep. Hence the removal of the
blk_mq_run_hw_queues(q, false) call. See also scsi_unblock_requests().
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230721172731.955724-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline scsi_kick_queue() to prepare for modifying the second argument
passed to blk_mq_run_hw_queues().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230721172731.955724-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to pass the bio to bio_try_merge_hw_seg. Just
pass the current bvec and rename the function to bvec_try_merge_hw_page.
This will allow reusing this function for supporting multi-page integrity
payload bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The update of bi_size is the only thing in __bio_try_merge_page that
needs a bio. Move it to the callers, and merge __bio_try_merge_page
and page_is_mergeable into a single bvec_try_merge_page that only takes
the current bvec instead of a full bio. This will allow reusing this
function for supporting multi-page integrity payload bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_add_page already checks that there is space in bi_size a little
earlier. So after we failed to add to an existing segment, just check
that there is another one available instead of duplicating the bi_size
check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Checking for availability in bi_size in a function that attempts to
merge into an existing segment is a bit odd, as the limit also applies
when adding a new segment. This code works fine as we always call
__bio_try_merge_page, but contributes to sub-optimal calling conventions
and doesn't lead to clear code.
Move it to two of the callers instead, the third one already has a more
strict check that includes max_hw_segments anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the bi_vcnt out of __bio_try_merge_page and into the two callers
that don't already have it in preparation for additional changes to
__bio_try_merge_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__bio_try_merge_page is a way too low-level helper to assert that the
bio is not cloned. Move the check into bio_add_page and
bio_iov_iter_get_pages instead, which are the high level entry points
that should enforce this variant. bio_add_hw_page already this
check, coverig the third (indirect) caller of __bio_try_merge_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the SECTOR_SHIFT magic constant instead of the magic number.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_add_hw_page already checks if the number of bytes trying to be added
even fit into max_hw_sectors limit of the queue. Remove the call to
bio_full and just do a check for the smaller of the number of segments
in the bio and the queue max segments limit, and do this cheap check
before the more expensive gap to previous check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reduce some code by making use of bio_integrity_bytes().
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230719121608.32105-1-nj.shetty@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we don't need to maintain inflight flush_data requests list
anymore, we can reuse rq->queuelist for flush pending list.
Note in mq_flush_data_end_io(), we need to re-initialize rq->queuelist
before reusing it in the state machine when end, since the rq->rq_next
also reuse it, may have corrupted rq->queuelist by the driver.
This patch decrease the size of struct request by 16 bytes.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230717040058.3993930-5-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flush state machine use a double list to link all inflight
flush_data requests, to avoid issuing separate post-flushes for
these flush_data requests which shared PREFLUSH.
So we can't reuse rq->queuelist, this is why we need rq->flush.list
In preparation of the next patch that reuse rq->queuelist for flush
state machine, we change the double linked list to unsigned long
counter, which count all inflight flush_data requests.
This is ok since we only need to know if there is any inflight
flush_data request, so unsigned long counter is good.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230717040058.3993930-4-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the policy == (REQ_FSEQ_DATA | REQ_FSEQ_POSTFLUSH), it means that the
data sequence and post-flush sequence need to be done for this request.
The rq->flush.seq should record what sequences have been done (or don't
need to be done). So in this case, pre-flush doesn't need to be done,
we should init rq->flush.seq to REQ_FSEQ_PREFLUSH not REQ_FSEQ_POSTFLUSH.
Fixes: 615939a2ae ("blk-mq: defer to the normal submission path for post-flush requests")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230717040058.3993930-3-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If request need to be completed remotely, we insert it into percpu llist,
and smp_call_function_single_async() if llist is empty previously.
We don't need to use per-rq csd, percpu csd is enough. And the size of
struct request is decreased by 24 bytes.
This way is cleaner, and looks correct, given block softirq is guaranteed
to be scheduled to consume the list if one new request is added to this
percpu list, either smp_call_function_single_async() returns -EBUSY or 0.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230717040058.3993930-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the write_cache attribute allows enabling the QUEUE_FLAG_WC
flag on devices that never claimed the capability.
Fix that by adding a QUEUE_FLAG_HW_WC flag that is set by
blk_queue_write_cache and guards re-enabling the cache through sysfs.
Note that any rescan that calls blk_queue_write_cache will still
re-enable the write cache as in the current code.
Fixes: 93e9d8e836 ("block: add ability to flag write back caching on a device")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the local queue_wc_store variable and handling setting and
clearing the QUEUE_FLAG_WC flag diretly instead the if / else if.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a module alias to nbd.ko that allows the generic netlink core to
automatically load the module when netlink messages for nbd are
received.
This frees the user from manually having to load the module before using
nbd functionality via netlink.
If the system policy allows it this can even be used to load the nbd
module from containers which would otherwise not have access to the
necessary module files to do a normal "modprobe nbd".
For example this avoids the following error when using nbd-client:
$ nbd-client localhost 10809 /dev/nbd0
...
Error: Couldn't resolve the nbd netlink family, make sure the nbd module is loaded and your nbd driver supports the netlink interface.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Josef Bacik <josef@toxicpadna.com>
Link: https://lore.kernel.org/r/20230713-b4-nbd-genl-v3-1-226cbddba04b@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
