The Intel visual sensing controller (IVSC) device is designed to control
the camera sharing between host IPU for media usage and IVSC for context
sensing (face detection).
IVSC is exposed to HOST as an SPI device and the message protocol over
the SPI BUS for communicating with the IVSC device is implemented. This
is the backend of mei framework for IVSC device, which usually handles
the hardware data transfer. The mei_csi and mei_ace are the clients of
IVSC mei framework.
The firmware downloading for the IVSC device is implemented as well.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hao Yao <hao.yao@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/1701651344-20723-2-git-send-email-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Failure to register SGI for firmware event notification is non-fatal error
when feature is not supported by other modules such as Xen and TF-A. Add
_info level log message for such special case.
Also add XST_PM_INVALID_VERSION error code and map it to -EOPNOSUPP Linux
kernel error code. If feature is not supported or EEMI API version is
mismatch, firmware can return XST_PM_INVALID_VERSION = 4 or
XST_PM_NO_FEATURE = 19 error code.
Co-developed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-5-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use family code in order to register event manager
driver for Versal and Versal NET platforms, instead
of using compatible string.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-4-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support feature check for all modules, append the module id of the API
that is being checked to the feature check API so it could be routed to
the target module for processing.
There is no need to check compatible string because the board information
is taken via firmware interface.
Co-developed-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-3-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
System-level platform management layer (do_fw_call()) has support for
maximum of 5 arguments as of now (1 EEMI API ID + 4 command arguments).
In order to support new EEMI PM_IOCTL IDs (Secure Read/Write), this
support must be extended to support one additional argument, which
results in a configuration of - 1 EEMI API ID + 5 command arguments.
Update zynqmp_pm_invoke_fn() and do_fw_call() with this new definition
containing variable arguments. As a result, update all the references
to pm invoke function with the updated definition.
Co-developed-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-2-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are systems with more than 8 memory slots where the i2c bus for
SPD is multiplexed. i2c_register_spd() isn't used yet on such systems,
but it's planned. So we need to extend ee1004 accordingly.
With this extension a maximum of 8 i2c busses is supported.
I don't have such a system for testing, therefore I just verified
that the driver still works on a system with a single i2c bus.
For the sake of simplicity the extension uses the existing global
mutex to protect access on all busses. This could be improved,
but we support 8 busses only, and SPD data is small and rarely
accessed, so it shouldn't be a problem.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f1a216a8-e77c-49f2-8838-561349b30ab8@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of parport_register_dev_model() callers pass a 'name' that is a
constant string.
So kstrdup_const() can be used to save the duplication of this string
when it is not needed. This saves a few bytes of memory.
Use kfree_const() accordingly when this string is freed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/0eba5f2ddd142ab0f577f67e482d1152b40ee720.1700860416.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
comedi_fops.c utilizes memdup_user() to copy a userspace array.
The new function memdup_array_user() provides a standardized way to copy
userspace-arrays. It makes it easier to see that an array is being
copied and, additionally, performs a generic overflow-check which might
help make the code more robust in case of changes in the future.
Replace memdup_user() with memdup_array_user().
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20231103112932.75795-2-pstanner@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/filesystems/ramfs-rootfs-initramfs.rst states:
If CONFIG_TMPFS is enabled, rootfs will use tmpfs instead of ramfs by
default. To force ramfs, add "rootfstype=ramfs" to the kernel command
line.
This currently does not work when root= is provided since then
saved_root_name contains a string and rootfstype= is ignored. Therefore,
ramfs is currently always chosen when root= is provided.
The current behavior for rootfs's filesystem is:
root= | rootfstype= | chosen rootfs filesystem
------------+-------------+--------------------------
unspecified | unspecified | tmpfs
unspecified | tmpfs | tmpfs
unspecified | ramfs | ramfs
provided | ignored | ramfs
rootfstype= should be respected regardless whether root= is given,
as shown below:
root= | rootfstype= | chosen rootfs filesystem
------------+-------------+--------------------------
unspecified | unspecified | tmpfs (as before)
unspecified | tmpfs | tmpfs (as before)
unspecified | ramfs | ramfs (as before)
provided | unspecified | ramfs (compatibility with before)
provided | tmpfs | tmpfs (new)
provided | ramfs | ramfs (new)
This table represents the new behavior.
Fixes: 6e19eded36 ("initmpfs: use initramfs if rootfstype= or root= specified")
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Landley <rob@landley.net>
Link: https://lore.kernel.org/lkml/8244c75f-445e-b15b-9dbf-266e7ca666e2@landley.net/
Reviewed-and-Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231120011248.396012-1-stefanb@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The alloc->mutex is a highly contended lock that causes performance
issues on Android devices. When a low-priority task is given this lock
and it sleeps, it becomes difficult for the task to wake up and complete
its work. This delays other tasks that are also waiting on the mutex.
The problem gets worse when there is memory pressure in the system,
because this increases the contention on the alloc->mutex while the
shrinker reclaims binder pages.
Switching to a spinlock helps to keep the waiters running and avoids the
overhead of waking up tasks. This significantly improves the transaction
latency when the problematic scenario occurs.
The performance impact of this patchset was measured by stress-testing
the binder alloc contention. In this test, several clients of different
priorities send thousands of transactions of different sizes to a single
server. In parallel, pages get reclaimed using the shinker's debugfs.
The test was run on a Pixel 8, Pixel 6 and qemu machine. The results
were similar on all three devices:
after:
| sched | prio | average | max | min |
|--------+------+---------+-----------+---------|
| fifo | 99 | 0.135ms | 1.197ms | 0.022ms |
| fifo | 01 | 0.136ms | 5.232ms | 0.018ms |
| other | -20 | 0.180ms | 7.403ms | 0.019ms |
| other | 19 | 0.241ms | 58.094ms | 0.018ms |
before:
| sched | prio | average | max | min |
|--------+------+---------+-----------+---------|
| fifo | 99 | 0.350ms | 248.730ms | 0.020ms |
| fifo | 01 | 0.357ms | 248.817ms | 0.024ms |
| other | -20 | 0.399ms | 249.906ms | 0.020ms |
| other | 19 | 0.477ms | 297.756ms | 0.022ms |
The key metrics above are the average and max latencies (wall time).
These improvements should roughly translate to p95-p99 latencies on real
workloads. The response time is up to 200x faster in these scenarios and
there is no penalty in the regular path.
Note that it is only possible to convert this lock after a series of
changes made by previous patches. These mainly include refactoring the
sections that might_sleep() and changing the locking order with the
mmap_lock amongst others.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-29-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The locking order currently requires the alloc->mutex to be acquired
first followed by the mmap lock. However, the alloc->mutex is converted
into a spinlock in subsequent commits so the order needs to be reversed
to avoid nesting the sleeping mmap lock under the spinlock.
The shrinker's callback binder_alloc_free_page() is the only place that
needs to be reordered since other functions have been refactored and no
longer nest these locks.
Some minor cosmetic changes are also included in this patch.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-28-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prefer logging vma offsets instead of addresses or simply drop the debug
log altogether if not useful. Note this covers the instances affected by
the switch to store addresses as unsigned long. However, there are other
sections in the driver that could do the same.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-27-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Skip the freelist call immediately as needed, instead of continuing the
pointless checks. Also, drop the debug logs that we don't really need.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-26-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code in print_binder_buffer() is quite small so it can be collapsed
into its single caller binder_alloc_print_allocated().
No functional change in this patch.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-25-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code to determine the page range for binder_lru_freelist_del() is
quite obscure. It leverages the buffer_size calculated before doing an
oversized buffer split. This is used to figure out if the last page is
being shared with another active buffer. If so, the page gets trimmed
out of the range as it has been previously removed from the freelist.
This would be equivalent to getting the start page of the next in-use
buffer explicitly. However, the code for this is much larger as we can
see in binder_free_buf_locked() routine. Instead, lets settle on
documenting the tricky step and using better names for now.
I believe an ideal solution would be to count the binder_page->users to
determine when a page should be added or removed from the freelist.
However, this is a much bigger change than what I'm willing to risk at
this time.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-24-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the page allocation step is done separately we should rename
the binder_free_page_range() and binder_allocate_page_range() functions
to provide a more accurate description of what they do. Lets borrow the
freelist concept used in other parts of the kernel for this.
No functional change here.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-23-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sections in binder_alloc_new_buf_locked() dealing with oversized
buffers are scattered which makes them difficult to read. Instead,
consolidate this code into a single block to improve readability.
No functional change here.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-22-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The debug information in this statement is already logged earlier in the
same function. We can get rid of this duplicate log.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-21-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split out the insertion of pages to be outside of the alloc->mutex in a
separate binder_install_buffer_pages() routine. Since this is no longer
serialized, we must look at the full range of pages used by the buffers.
The installation is protected with mmap_sem in write mode since multiple
tasks might race to install the same page.
Besides avoiding unnecessary nested locking this helps in preparation of
switching the alloc->mutex into a spinlock_t in subsequent patches.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-20-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than repeatedly initializing some of the binder_lru_page members
during binder_alloc_new_buf(), perform this initialization just once in
binder_alloc_mmap_handler(), after the pages have been created.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-19-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preallocate new_buffer before acquiring the alloc->mutex and hand it
down to binder_alloc_new_buf_locked(). The new buffer will be used in
the vast majority of requests (measured at 98.2% in field data). The
buffer is discarded otherwise. This change is required in preparation
for transitioning alloc->mutex into a spinlock in subsequent commits.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-18-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of looping through the page range twice to first determine if
the mmap lock is required, simply do it per-page as needed. Split out
all this logic into a separate binder_install_single_page() function.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-17-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move this function up along with binder_alloc_get_page() so that their
prototypes aren't necessary.
No functional change in this patch.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-16-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the low async space calculation to debug_low_async_space_locked().
This logic not only fits better here but also offloads some of the many
tasks currently done in binder_alloc_new_buf_locked().
No functional change in this patch.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-15-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the no-space debugging logic into a separate function. Lets also
mark this branch as unlikely in binder_alloc_new_buf_locked() as most
requests will fit without issue.
Also add a few cosmetic changes and suggestions from checkpatch.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-14-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binder attributes the buffer allocation to the current->tgid everytime.
There is no need to pass this as a parameter so drop it.
Also add a few touchups to follow the coding guidelines. No functional
changes are introduced in this patch.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-13-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract non-critical sections from binder_alloc_new_buf_locked() that
don't require holding the alloc->mutex. While we are here, consolidate
the checks for size overflow and zero-sized padding into a separate
sanitized_size() helper function.
Also add a few touchups to follow the coding guidelines.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-12-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The binder_update_page_range() function performs both allocation and
freeing of binder pages. However, these two operations are unrelated and
have no common logic. In fact, when a free operation is requested, the
allocation logic is skipped entirely. This behavior makes the error path
unnecessarily complex. To improve readability of the code, this patch
splits the allocation and freeing operations into separate functions.
No functional changes are introduced by this patch.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-11-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vma addresses in binder are currently stored as void __user *. This
requires casting back and forth between the mm/ api which uses unsigned
long. Since we also do internal arithmetic on these addresses we end up
having to cast them _again_ to an integer type.
Lets stop all the unnecessary casting which kills code readability and
store the virtual addresses as the native unsigned long from mm/. Note
that this approach is preferred over uintptr_t as Linus explains in [1].
Opportunistically add a few cosmetic touchups.
Link: https://lore.kernel.org/all/CAHk-=wj2OHy-5e+srG1fy+ZU00TmZ1NFp6kFLbVLMXHe7A1d-g@mail.gmail.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-10-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from drivers/android/binder_alloc.h as they
are not needed.
No functional changes in this patch.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-9-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the comments of binder_alloc_new_buf() to reflect that the return
value of the function is now ERR_PTR(-errno) on failure.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 57ada2fb22 ("binder: add log information for binder transaction failures")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-8-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix minor misspelling of the function in the comment section.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 0f966cba95 ("binder: add flag to clear buffer on txn complete")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-7-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each transaction is associated with a 'struct binder_buffer' that stores
the metadata about its buffer area. Since commit 74310e06be ("android:
binder: Move buffer out of area shared with user space") this struct is
no longer embedded within the buffer itself but is instead allocated on
the heap to prevent userspace access to this driver-exclusive info.
Unfortunately, the space of this struct is still being accounted for in
the total buffer size calculation, specifically for async transactions.
This results in an additional 104 bytes added to every async buffer
request, and this area is never used.
This wasted space can be substantial. If we consider the maximum mmap
buffer space of SZ_4M, the driver will reserve half of it for async
transactions, or 0x200000. This area should, in theory, accommodate up
to 262,144 buffers of the minimum 8-byte size. However, after adding
the extra 'sizeof(struct binder_buffer)', the total number of buffers
drops to only 18,724, which is a sad 7.14% of the actual capacity.
This patch fixes the buffer size calculation to enable the utilization
of the entire async buffer space. This is expected to reduce the number
of -ENOSPC errors that are seen on the field.
Fixes: 74310e06be ("android: binder: Move buffer out of area shared with user space")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-6-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the padding of 0-sized buffers to an earlier stage to account for
this round up during the alloc->free_async_space check.
Fixes: 74310e06be ("android: binder: Move buffer out of area shared with user space")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-5-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Task A calls binder_update_page_range() to allocate and insert pages on
a remote address space from Task B. For this, Task A pins the remote mm
via mmget_not_zero() first. This can race with Task B do_exit() and the
final mmput() refcount decrement will come from Task A.
Task A | Task B
------------------+------------------
mmget_not_zero() |
| do_exit()
| exit_mm()
| mmput()
mmput() |
exit_mmap() |
remove_vma() |
fput() |
In this case, the work of ____fput() from Task B is queued up in Task A
as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup
work gets executed. However, Task A instead sleep, waiting for a reply
from Task B that never comes (it's dead).
This means the binder_deferred_release() is blocked until an unrelated
binder event forces Task A to go back to userspace. All the associated
death notifications will also be delayed until then.
In order to fix this use mmput_async() that will schedule the work in
the corresponding mm->async_put_work WQ instead of Task A.
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmap read lock is used during the shrinker's callback, which means
that using alloc->vma pointer isn't safe as it can race with munmap().
As of commit dd2283f260 ("mm: mmap: zap pages with read mmap_sem in
munmap") the mmap lock is downgraded after the vma has been isolated.
I was able to reproduce this issue by manually adding some delays and
triggering page reclaiming through the shrinker's debug sysfs. The
following KASAN report confirms the UAF:
==================================================================
BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8
Read of size 8 at addr ffff356ed50e50f0 by task bash/478
CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70
Hardware name: linux,dummy-virt (DT)
Call trace:
zap_page_range_single+0x470/0x4b8
binder_alloc_free_page+0x608/0xadc
__list_lru_walk_one+0x130/0x3b0
list_lru_walk_node+0xc4/0x22c
binder_shrink_scan+0x108/0x1dc
shrinker_debugfs_scan_write+0x2b4/0x500
full_proxy_write+0xd4/0x140
vfs_write+0x1ac/0x758
ksys_write+0xf0/0x1dc
__arm64_sys_write+0x6c/0x9c
Allocated by task 492:
kmem_cache_alloc+0x130/0x368
vm_area_alloc+0x2c/0x190
mmap_region+0x258/0x18bc
do_mmap+0x694/0xa60
vm_mmap_pgoff+0x170/0x29c
ksys_mmap_pgoff+0x290/0x3a0
__arm64_sys_mmap+0xcc/0x144
Freed by task 491:
kmem_cache_free+0x17c/0x3c8
vm_area_free_rcu_cb+0x74/0x98
rcu_core+0xa38/0x26d4
rcu_core_si+0x10/0x1c
__do_softirq+0x2fc/0xd24
Last potentially related work creation:
__call_rcu_common.constprop.0+0x6c/0xba0
call_rcu+0x10/0x1c
vm_area_free+0x18/0x24
remove_vma+0xe4/0x118
do_vmi_align_munmap.isra.0+0x718/0xb5c
do_vmi_munmap+0xdc/0x1fc
__vm_munmap+0x10c/0x278
__arm64_sys_munmap+0x58/0x7c
Fix this issue by performing instead a vma_lookup() which will fail to
find the vma that was isolated before the mmap lock downgrade. Note that
this option has better performance than upgrading to a mmap write lock
which would increase contention. Plus, mmap_write_trylock() has been
recently removed anyway.
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Cc: stable@vger.kernel.org
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use EPOLLERR instead of POLLERR to make sure it is cast to the correct
__poll_t type. This fixes the following sparse issue:
drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types)
drivers/android/binder.c:5030:24: expected restricted __poll_t
drivers/android/binder.c:5030:24: got int
Fixes: f88982679f ("binder: check for binder_thread allocation failure in binder_poll()")
Cc: stable@vger.kernel.org
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We receive an ACPI notification every time the VM Generation ID changes
and use the new ID as fresh randomness added to the entropy pool. This
commits emits a uevent every time we receive the ACPI notification, as a
means to notify the user space that it now is in a new VM.
Signed-off-by: Babis Chalios <bchalios@amazon.es>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Lennart Poettering <mzxreary@0pointer.de>
Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.es
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running Linux inside a Nitro Enclave, the hypervisor provides a
special virtio device called "Nitro Security Module" (NSM). This device
has 3 main functions:
1) Provide attestation reports
2) Modify PCR state
3) Provide entropy
This patch adds a driver for NSM that exposes a /dev/nsm device node which
user space can issue an ioctl on this device with raw NSM CBOR formatted
commands to request attestation documents, influence PCR states, read
entropy and enumerate status of the device. In addition, the driver
implements a hwrng backend.
Originally-by: Petre Eftime <petre.eftime@gmail.com>
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231011213522.51781-1-graf@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e9e3300b6e ("vgacon: rework Kconfig dependencies") turns the
dependencies into a positive list of supported architectures, which
includes the IA64 architecture, but in the meantime, this architecture is
removed in commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture").
Drop the reference to IA64 architecture in the dependency list of the
VGA_CONSOLE config definition.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20231110114400.30882-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231112000029.151117-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rc is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20231113015229.12074-1-kunyu@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The link pointer does not need to cast the type.
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20231113014533.11064-1-zeming@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The irq pointer does not need to cast the type.
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20231113012202.7887-1-zeming@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ctx pointer does not need to cast the type.
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20231113011543.6940-1-zeming@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
