The rule to copy this file doesn't have to be forced. However
lib1funcs.[So] have to be listed amongst the targets.
This prevents zImage from being recreated needlessly.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
Some old bootloaders can't be updated to a device tree capable one,
yet they provide ATAGs with memory configuration, the ramdisk address,
the kernel cmdline string, etc. To allow a device tree enabled
kernel to be used with such bootloaders, it is necessary to convert those
ATAGs into FDT properties and fold them into the DTB appended to zImage.
Currently the following ATAGs are converted:
ATAG_CMDLINE
ATAG_MEM
ATAG_INITRD2
If the corresponding information already exists in the appended DTB, it
is replaced, otherwise the required node is created to hold it.
The code looks for ATAGs at the location pointed by the value of r2 upon
entry into the zImage code. If no ATAGs are found there, an attempt at
finding ATAGs at the typical 0x100 offset from start of RAM is made.
Otherwise the DTB is left unchanged.
Thisstarted from an older patch from John Bonesio <bones@secretlab.ca>,
with contributions from David Brown <davidb@codeaurora.org>.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
This is a small subset of string functions needed by commits to come.
Except for memcpy() which is unchanged from its original location, their
implementation is meant to be small, and -Os is enforced to prevent gcc
from doing pointless loop unrolling.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
The appended DTB gets relocated with the decompressor code to get out
of the way of the decompressed kernel. However the kernel's .bss section
may be larger than the relocated code and data, and then the DTB gets
overwritten. Let's make sure the relocation takes care of moving zImage
far enough so no such conflict with .bss occurs.
Thanks to Tony Lindgren <tony@atomide.com> for figuring out this issue.
While at it, let's clean up the code a bit so that the wont_overwrite
symbol is used while determining if a conflict exists, making the above
change more precise as well as eliminating some ARM/THUMB alternates.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
This patch provides the ability to boot using a device tree that is appended
to the raw binary zImage (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
Signed-off-by: John Bonesio <bones@secretlab.ca>
[nico: ported to latest zImage changes plus additional cleanups/improvements]
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
This is needed for proper alignment when the DTB appending feature
is used.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
Currently, armpmu_enable iterates through the events for a given
counter set, calling armpmu->enable on each before calling
armpmu->start to start the PMU's counters.
As armpmu->enable is called when each event is added, each event is
already configured in hardware. Due to this, calling armpmu->enable
in armpmu_enable is unnecessary and confusing.
This patch removes the unnecessary calls to armpmu->enable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, struct arm_pmu and related functions are only visible to
{,arch/arm/}/kernel/perf_event.c. This prevents new drivers from using
the framework.
This patch moves declarations to asm/pmu.h, allowing new PMU drivers
to use the framework.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently struct cpu_hw_events stores data on events running on a
PMU associated with a CPU. As this data is general enough to be used
for system PMUs, this name is a misnomer, and may cause confusion when
it is used for system PMUs.
Additionally, 'armpmu' is commonly used as a parameter name for an
instance of struct arm_pmu. The name is also used for a global instance
which represents the CPU's PMU.
As cpu_hw_events is now not tied to CPU PMUs, it is renamed to
pmu_hw_events, with instances of it renamed similarly. As the global
'armpmu' is CPU-specfic, it is renamed to cpu_pmu. This should make it
clearer which code is generic, and which is coupled with the CPU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently the event accounting data in pmu_hw_events is stored in
fixed-sized arrays within the structure.
This patch refactors the accounting data to allow any number of events
to be managed.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, a single static instance of struct pmu is used when
registering an ARM PMU with the main perf subsystem. This limits
the ARM perf code to supporting a single PMU.
This patch replaces the static struct pmu instance with a member
variable on struct arm_pmu. This provides bidirectional mapping
between the two structs, and therefore allows for support of multiple
PMUs. The function 'to_arm_pmu' is provided for convenience.
PMU-generic functions are also updated to use the new mapping, and
PMU-generic initialisation of the member variables is moved into a new
function: armpmu_init.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently mapping an event type to a hardware configuration value
depends on the data being pointed to from struct arm_pmu. These fields
(cache_map, event_map, raw_event_mask) are currently specific to CPU
PMUs, and do not serve the general case well.
This patch replaces the event map pointers on struct arm_pmu with a new
'map_event' function pointer. Small shim functions are used to reuse
the existing common code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, the ARM perf code assumes all PMUs it will handle are
CPU PMUs, having ARM_PMU_DEVICE_CPU hardcoded when reserving or
releasing hardware. This means that currently, the ARM perf code can't
support system PMUs.
This patch adds a 'type' field to struct arm_pmu, which allows the code
to reserve & release the hardware regardless of the PMU type.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, a single lock serialises access to CPU PMU registers. This
global locking is unnecessary as PMU registers are local to the CPU
they monitor.
This patch replaces the global lock with a per-CPU lock. As the lock is
in struct cpu_hw_events, PMUs providing a single cpu_hw_events instance
can be locked globally.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As armpmu_disable will call armpmu->stop when the last event has been
removed, this is pointless and simply adds to the noise when debugging.
Additionally, due to this call occurring in a preemptible context, this
is problematic for per-cpu locking of PMU registers (where we will
attempt to access per-cpu spinlock for use with raw_spin_lock_irqsave).
This patch removes the call to armpmu->stop.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, cpu_hw_events is a global per-CPU variable. To enable
support for multiple PMUs, there needs to be a mapping from an instance
of arm_pmu to its cpu_hw_events. Additionally, as system PMUs are not
CPU-affine, they should not have this stored per-CPU.
This patch moves access to the hardware events data behind an accessor
function (arm_pmu::get_hw_events). This allows each instance to have
its own hardware event data, which can be stored per-CPU or globally as
required.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently the ARM perf code supports having a single struct
platform_device to supply IRQ numbers, limiting it to supporting a
single PMU.
This patch makes a platform_device instance variable on struct arm_pmu.
This should allow for multiple PMUs to be supported in future.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch moves the active_events counter into struct arm_pmu, in
preparation for supporting multiple PMUs. This also moves
pmu_reserve_mutex, as it is used to guard accesses to active_events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, pmu_hw_events::active_mask is used to keep track of which
events are active in hardware. As we can stop counters and their
interrupts, this is unnecessary.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, event group validation compares each event's 'pmu' pointer
against the static 'pmu' pointer. This limits the code to supporting
only 1 PMU.
This patch changes the behaviour to consider an event's group leader's
'pmu' pointer as canonical for validation. This should ease later
generalisation of the code to support multiple PMUs at once.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, an "empty" struct pmu is registered as the CPU PMU,
regardless of whether there is a physical PMU. This burdens the
accessor functions with checks to see whether a PMU is actually
present.
This patch changes initialisation to register a PMU only if there is a
supported PMU present, and removes the checks that this change makes
redundant.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, an event's 'pmu' field is set after pmu::event_init() is
called. This means that pmu::event_init() must figure out which struct
pmu the event was initialised from. This makes it difficult to
consolidate common event initialisation code for similar PMUs, and
very difficult to implement drivers for PMUs which can have multiple
instances (e.g. a USB controller PMU, a GPU PMU, etc).
This patch sets the 'pmu' field before initialising the event, allowing
event init code to identify the struct pmu instance easily. In the
event of failure to initialise an event, the event is destroyed via
kfree() without calling perf_event::destroy(), so this shouldn't
result in bad behaviour even if the destroy field was set before
failure to initialise was noted.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1313062280-19123-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ARM hw_breakpoint backend is currently a bit too noisy when things
start to go awry.
This patch removes a couple of over-zealous WARN_ONCE invocations and
replaces then with pr_warnings instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM debug registers can only be accessed if the DBGSWENABLE signal
to the core is driven HIGH by the DAP. The architecture does not provide
a way to detect the value of this signal, so the best we can do is
register an undef_hook to trap debug register co-processor accesses and
then fail if the trap is taken.
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARM debug architecture 7.1 mandates that the DFAR is updated on a
watchpoint debug exception to contain the faulting virtual address
of the memory access. This allows us to determine which watchpoints
have fired and therefore report useful information to userspace.
This patch adds support for using the DFAR in the watchpoint handler,
which allows us to support multiple watchpoints on CPUs implementing
the new debug architecture.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The current hw_breakpoint code on ARM reserves 1 breakpoint for each
watchpoint that is available. Since debug architectures prior to 7.1
are restricted to 1 watchpoint anyway, only one breakpoint was ever
reserved.
This patch changes the reservation strategy so that a single breakpoint
is reserved, regardless of the number of watchpoints. This is in
preparation for multiple-watchpoint support on debug architectures
from 7.1 onwards.
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds initial support for Cortex-A15 (debug architecture v7.1)
to the hw_breakpoint ARM backend.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The Cortex-A15 PMU implements the PMUv2 specification and therefore
has support for some mode exclusion.
This patch adds support for excluding user, kernel and hypervisor counts
from a given event.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Modern PMUs allow for mode exclusion, so we no longer wish to return
-EPERM if it is requested.
This patch provides a hook in the armpmu structure for implementing
mode exclusion. The hw_perf_event initialisation is slightly delayed so
that the backend code can update the structure if required.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARM PMU code used to use 1-based indices for PMU registers. This caused
several data structures (pmu_hw_events::{active_events, used_mask, events})
to have an unused element at index zero. ARMPMU_MAX_HWEVENTS still takes
this indexing into account, and currently equates to 33.
This patch updates the core ARM perf code to use the 0th index again.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the ARMv7 PMU backend indexes event counters from zero, follow
suit and do the same for ARMv6 and Xscale.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The current ARMv7 PMU backend indexes event counters from two, with
index zero being reserved and index one being used to represent the
cycle counter.
This patch tidies up the code by indexing from one instead (with zero
for the cycle counter). This allows us to remove many of the accessor
macros along with the counter enumeration and makes the code much more
readable.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch ensures that integers are used to represent event indices in
the ARMv7 PMU backend. This ensures consistency between functions and
also with the arm_pmu structure.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARMv7 perf backend mixes up u32 and unsigned long, which is rather
ugly.
This patch makes the ARMv7 PMU code consistently use the u32 type
instead.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 5dfc54e0 ("ARM: GIC: avoid routing interrupts to offline CPUs")
prevents the GIC from setting the affinity of an IRQ to a CPU with
id >= nr_cpu_ids. This was previously abused by perf on some platforms
where more IRQs were registered than possible CPUs.
This patch fixes the problem by using a cpumask_t to keep track of the
active (requested) interrupts in perf. The same effect could be achieved
by limiting the number of IRQs to the number of CPUs, but using a mask
instead will be useful for adding extended CPU hotplug support in the
future.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Once upon a time, OProfile and Perf fought hard over who could play with
the PMU. To stop all hell from breaking loose, pmu.c offered an internal
reserve/release API and took care of parsing PMU platform data passed in
from board support code.
Now that Perf has ingested OProfile, let's move the platform device
handling into the Perf driver and out of the PMU locking code.
Unfortunately, the lock has to remain to prevent Perf being bitten by
out-of-tree modules such as LTTng, which still claim a right to the PMU
when Perf isn't looking.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch removes const qualifiers from instances of struct arm_pmu,
and functions initialising them, in preparation for generalising
arm_pmu usage to system (AKA uncore) PMUs.
This will allow for dynamically modifiable structures (locks,
struct pmu) to be added as members of struct arm_pmu.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: pm: avoid writing the auxillary control register for ARMv7
ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness
ARM: pm: arm920/926: fix number of registers saved
ARM: pm: CPU specific code should not overwrite r1 (v:p offset)
ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU
ARM: 7065/1: kexec: ensure new kernel is entered in ARM state
ARM: 7003/1: vexpress: Add clock definition for the SP805.
ARM: 7051/1: cpuimx* boards: fix mach-types errors
ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER
ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss enabled
ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation.
ARM: 6967/1: ep93xx: ts72xx: fix board model detection
ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boards
ARM: cache: detect VIPT aliasing I-cache on ARMv6
ARM: twd: register clockevents device before enabling PPI
ARM: realview: ensure visibility of writes during reset
ARM: perf: make name of arm_pmu_type consistent
ARM: perf: fix prototype of release_pmu
ARM: fix perf build with uclibc toolchains
These were missed in commit f5b9409973 "All Arch: remove linkage
for sys_nfsservctl system call" due to them having no sys_ prefix
(presumably).
Cc: NeilBrown <neilb@suse.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
netpoll: fix incorrect access to skb data in __netpoll_rx
cassini: init before use in cas_interruptN.
can: ti_hecc: Fix uninitialized spinlock in probe
can: ti_hecc: Fix unintialized variable
net: sh_eth: fix the compile error
net/phy: fix DP83865 phy interrupt handler
sendmmsg/sendmsg: fix unsafe user pointer access
ibmveth: Fix leak when recycling skb and hypervisor returns error
arp: fix rcu lockdep splat in arp_process()
bridge: fix a possible use after free
bridge: Pseudo-header required for the checksum of ICMPv6
mcast: Fix source address selection for multicast listener report
MAINTAINERS: Update GIT trees for network development
ath9k: Fix PS wrappers in ath9k_set_coverage_class
carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlock
wl12xx: add max_sched_scan_ssids value to the hw description
wl12xx: Fix validation of pm_runtime_get_sync return value
wl12xx: Remove obsolete testmode NVS push command
bcma: add uevent to the bus, to autoload drivers
ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC address
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and timer interrupt
sparc: Remove another reference to nfsservctl
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x:
sh: fix the compile error in setup-sh7757.c
serial: sh-sci: report CTS as active for get_mctrl
sh: Add unaligned memory access for PC relative intructions
sh: Fix unaligned memory access for branches without delay slots
sh: Fix up fallout from cpuidle changes.
serial: sh-sci: console Runtime PM support
sh: Fix conflicting definitions of ptrace_triggered
serial: sh-sci: fix DMA build by including dma-mapping.h
serial: sh-sci: Fix up default regtype probing.
sh: intc: enable both edges GPIO interrupts on sh7372
shwdt: fix usage of mod_timer
clocksource: sh_cmt: wait for CMCNT on init V2
As Paul has not much time for it I take over maintaining the
framebuffer subsystem.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts
and has a specialized interrupt handler. IPI is currently set to use IRQ 14
as well, which causes it to trigger the timer interrupt handler, and not the
IPI interrupt handler.
The IPI interrupt is therefore changed to IRQ 13, which is the highest
normally handled interrupt. This IRQ is also used for SBUS interrupts,
however there is nothing in the IPI/SBUS interrupt handlers that indicate
that they will not handle sharing the interrupt.
(IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a
sun4d system)
Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
