return value form directly instead of
taking this in another redundant variable.
Link: https://lore.kernel.org/linux-media/20211210024721.425145-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
return value form directly instead of
taking this in another redundant variable.
Link: https://lore.kernel.org/linux-media/20211209015009.409428-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the dev_err_probe() helper, instead of open-coding the same
operation. While at it retrieve the error once and use it from
'ret' instead of retrieving it twice.
Link: https://lore.kernel.org/linux-media/20211208121756.3051565-1-niklas.soderlund+renesas@ragnatech.se
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Niklas S\xF6derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The configure_channels() function has a double free because
configure_memdma_and_inputblock() calls free_input_block() and then
it's called again in the error handling code.
Link: https://lore.kernel.org/linux-media/20211208073544.GA22020@kili
Fixes: c5f5d0f997 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes: b0444f18e0 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pointer common is being assigned a value in a for-loop and the pointer
is never read afterwards. The assignment is redundant and can be removed.
Link: https://lore.kernel.org/linux-media/20211205002242.202769-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The variable i is assigned the value 0 and each time the value is
never read after it has been assigned. The assignments are redundant
and can be removed.
Link: https://lore.kernel.org/linux-media/20211205001717.178416-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A lot of userspace depends on a descriptive name for vdev. Without this
patch, users have a hard time figuring out which camera shall they use
for their video conferencing.
This reverts commit e3f60e7e1a.
Link: https://lore.kernel.org/linux-media/20211207003840.1212374-2-ribalda@chromium.org
Cc: <stable@vger.kernel.org>
Fixes: e3f60e7e1a ("media: uvcvideo: Set unique vdev name based in type")
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the first thing this function does is to call
v4l2_device_register(), it should call v4l2_device_unregister()
if an error occurs, the same way as done at saa7146_vv_release().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.
Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'ent_enum->bmap' is a bitmap. So use 'bitmap_zalloc()' to simplify
code, improve the semantic and avoid some open-coded arithmetic in
allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
While at it, remove a useless 'bitmap_zero()'.
Link: https://lore.kernel.org/linux-media/b11f646dda189f490c06bf671f64a2cc0af4d45c.1638397089.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The only usage of max96712_subdev_ops is to pass its address to
v4l2_i2c_subdev_init() which takes a pointer to const struct
v4l2_subdev_ops as argument. Make it const to allow the compiler to put
it in read-only memory.
Link: https://lore.kernel.org/linux-media/20211127094945.27985-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Niklas S\xF6derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
msi001_probe+0x13b/0x24b [msi001]
spi_probe+0xeb/0x130
...
do_syscall_64+0x35/0xb0
In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().
Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.
Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com
Fixes: 93203dd6c7 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While testing Rockchip RK3399 with both ISPs enabled, a dmesg error
was observed:
```
[ 15.559141] debugfs: Directory 'rkisp1' with parent '/' already present!
```
Fix it by using the device name for the debugfs subdirectory name
instead of the driver name, thus preventing name collision.
Link: https://lore.kernel.org/linux-media/20211010175457.438627-1-mike.rudenko@gmail.com
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
pt3_probe() did not free one of IO mappings in case when one of them was
successful while another one failed. The patch fixed that by using
functions pcim_*. Also, it simplifies error handling through switching
to devm_* functions.
Found by Linux Driver Verification project (linuxtesting.org).
Link: https://lore.kernel.org/linux-media/20210814155742.11392-1-novikov@ispras.ru
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597
The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.
[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ru
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Fixes: 299c7007e9 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Step 5 expects that the sensor is in LP11 mode. Use the new
pre_streamon callback to signal the sensor that it should switch into
LP11.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The lirc core already introduces gaps, so there is no need for this in
the driver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
These struct members do not serve any purpose.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove superfluous messages which add no information.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The usb pid/vid can be found elsewhere, the idVendor/idProduct usb sysfs
files for example.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no reason to have a reset after an IR timeout.
Calling ir_raw_event_handle() twice for the same interrupt has no
affect.
Fixes: 56b0ec30c4 ("[media] rc/streamzap: fix reporting response times")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
An IR reset is only used when the IR hardware reports an error.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
An IR reset is only used when the IR hardware reports an error.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without timeout reports, it is impossible to decode many protocols since
it is not known when the transmission ends. timeout reports are sent by
default, but can be turned off. There is no reason to turn them off, and
I cannot find any software which does this, so we can safely remove it.
This makes the ioctl LIRC_SET_REC_TIMEOUT_REPORTS a no-op.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the name of the read function of the sysfs attribute is normalized,
there is a natural association.
Link: https://lore.kernel.org/linux-media/20210603071009.11438-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
An spi remove callback is never called with an spi_device pointer that
is NULL. Also it is only called for devices that probed successfully. As
cxd2880_spi_probe() always sets driver data, spi_get_drvdata() cannot be
NULL.
Also the return value of spi remove callbacks is ignored anyway and not
freeing resources in .remove() is a bad idea.
Link: https://lore.kernel.org/linux-media/20211012153945.2651412-8-u.kleine-koenig@pengutronix.de
Cc: Mark Brown <broonie@kernel.org>, kernel@pengutronix.de, linux-media@vger.kernel.org, linux-spi@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If disabling the hardware fails the driver propagates the error code to
the i2c core. However this only results in a generic error message; the
device still disappears.
So instead emit a message that better describes the actual problem than
the i2c core's "remove failed (ESOMETHING), will be ignored" and return
0 to suppress the generic message.
Link: https://lore.kernel.org/linux-media/20211026194010.109029-1-u.kleine-koenig@pengutronix.de
Cc: linux-media@vger.kernel.org, kernel@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The module currently prints only "Rafael Micro r820t successfully
identified" when successfully loaded, which might be misleading as the
module actually supports various chip types.
Link: https://lore.kernel.org/linux-media/20211119234401.271193-1-dkk089@gmail.com
Cc: linux-kernel@vger.kernel.org, Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit e955f959ac ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:
[ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 312.264334] si2157 16-0060: firmware version: 3.0.5
[ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 342.295743] si2157 16-0060: firmware version: 3.0.5
[ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 372.385035] si2157 16-0060: firmware version: 3.0.5
Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.
Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.
Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03
Fixes: e955f959ac ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The beginning part of the "existing HSV/HSL formats" table (line 7742)
reads:
.. raw:: latex
\begingroup
\tiny
\setlength{\tabcolsep}{2pt}
However, the ending part (line 7834) reads:
.. raw:: latex
\normalsize
Fix the imbalance by replacing the \normalsize with \endgroup.
Note:
Actually, the imbalance is harmless and just results in an
informative message near the bottom of userspace-api.log:
(\end occurred inside a group at level 1)
### semi simple group (level 1) entered at line 70696 (\begingroup)
### bottom level
Link: https://lore.kernel.org/linux-media/b3eeec4d-1a34-0a1a-3097-1ddea3b5f1c8@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't populate the array idx_map on the stack but instead make it
static const. Also makes the object code smaller by 16 bytes.
Link: https://lore.kernel.org/linux-media/20211129230626.549090-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In function vb2_set_plane_payload, report if the given bytesused is
bigger than the buffer size, and clamp it to the buffer size.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In many places the bytesused field of struct vb2_buffer is set
directly. Replace that with the function call
vb2_set_plane_payload
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03 (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This field is only set, but never used. Drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The only usage of the v4l2_m2m_ops structs is to pass their address to
v4l2_m2m_init() which takes a pointer to const struct v4l2_m2m_ops as
argument. Make them const to allow the compiler to put them in read-only
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 03b1930efd ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
