ACPICA commit da9a83e1a845f2d7332bdbc0632466b2595e5424
For acpi_set_gpe()/acpi_enable_gpe(), our target is to purify them to be APIs
that can be used for various GPE handling models, so we need them to be
pure GPE enabling APIs. GPE enabling/disabling has 2 use cases:
1. Driver may permanently enable/disable GPEs according to the usage
counts.
1. When upper layers (the users of the driver) submit requests to the
driver, it means they care about the underlying hardware. GPE need
to be enabled for the first request submission and disabled for the
last request completion.
2. When the GPE is shared between 2+ silicon logics. GPE need to be
enabled for either silicon logic's driver and disabled when all of
the drivers are not started.
For these cases, acpi_enable_gpe()/acpi_disable_gpe() should be used. When
the usage count is increased from 0 to 1, the GPE is enabled and it is
disabled when the usage count is decrased from 1 to 0.
2. Driver may temporarily disables the GPE to enter an GPE polling mode and
wants to re-enable it later.
1. Prevent GPE storming: when a driver cannot fully solve the condition
that triggered the GPE in the GPE context, in order not to trigger
GPE storm, driver has to disable GPE to switch into the polling mode
and re-enables it in the non interrupt context after the storming
condition is cleared.
2. Meet throughput requirement: some IO drivers need to poll hardware
again and again until nothing indicated instead of just handling once
for one interruption, this need to be done in the polling mode or the
IO flood may prevent the GPE handler from returning.
3. Meet realtime requirement: in order not to block CPU to handle higher
realtime prioritized GPEs, lower priority GPEs can be handled in the
polling mode.
For these cases, acpi_set_gpe() should be used to switch to/from the
polling mode.
This patch adds unconditional GPE enabling support into acpi_set_gpe() so
that this API can be used by the drivers to switch back from the GPE
polling mode unconditionally.
Originally this function includes GPE clearing logic in it.
First, the GPE clearing is typically used in the GPE handling code to:
1. Acknowledge the GPE when we know there is an edge triggered GPE raised
and is about to handle it, otherwise the unexpected clearing may lead to
a GPE loss;
2. Issue actions after we have handled a level triggered GPE, otherwise
the unexpected clearing may trigger unwanted OSPM actions to the
hardware (for example, clocking in out-dated write FIFO data).
Thus the GPE clearing is not suitable to be used in the GPE enabling APIs.
Second, the combination of acknowledging and enabling may also not be
expected by the hardware drivers. For GPE clearing, we have a seperate API
acpi_clear_gpe(). There are cases drivers do want the 2 operations to be
split. So splitting these 2 operations could facilitates drivers the
maximum possibilities to achieve success. For a combined one, we already
have acpi_finish_gpe() ready to be invoked.
Given the fact that drivers should complete all outstanding requests before
putting themselves into the sleep states, as this API is executed for
outstanding requests, it should also have nothing to do with the
"RUN"/"WAKE" distinguishing. That's why the acpi_set_gpe(ACPI_GPE_ENABLE)
should not be implemented by acpi_hw_low_set_gpe(ACPI_GPE_CONDITIONAL_ENABLE).
This patch thus converts acpi_set_gpe(ACPI_GPE_ENABLE) into
acpi_hw_low_set_gpe(ACPI_GPE_ENABLE) to achieve a seperate GPE enabling API.
Drivers then are encouraged to use this API when they need to switch
to/from the GPE polling mode.
Note that the acpi_set_gpe()/acpi_finish_gpe() should be first introduced to
Linux using a divergence reduction patch before sending a linuxized version
of this patch. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/da9a83e1
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This can help to reduce source code differences between Linux and ACPICA
upstream. Further driver cleanups also require these APIs to eliminate GPE
storms.
1. acpi_set_gpe(): An API that driver should invoke in the case it wants
to disable/enable IRQ without honoring the reference
count implemented in the acpi_disable_gpe() and
acpi_enable_gpe(). Note that this API should only be
invoked inside a acpi_enable_gpe()/acpi_disable_gpe()
pair.
2. acpi_finish_gpe(): Drivers returned ACPI_REENABLE_GPE unset from the
GPE handler should use this API instead of
invoking acpi_set_gpe()/acpi_enable_gpe() to
re-enable the GPE.
The GPE APIs can be invoked inside of a GPE handler or in the task context
with a driver provided lock held. This driver provided lock is safe to be
held in the GPE handler by the driver.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 199cad16530a45aea2bec98e528866e20c5927e1
Since whether the GPE should be disabled/enabled/cleared should only be
determined by the GPE driver's state machine:
1. GPE should be disabled if the driver wants to switch to the GPE polling
mode when a GPE storm condition is indicated and should be enabled if
the driver wants to switch back to the GPE interrupt mode when all of
the storm conditions are cleared. The conditions should be protected by
the driver's specific lock.
2. GPE should be enabled if the driver has accepted more than one request
and should be disabled if the driver has completed all of the requests.
The request count should be protected by the driver's specific lock.
3. GPE should be cleared either when the driver is about to handle an edge
triggered GPE or when the driver has completed to handle a level
triggered GPE. The handling code should be protected by the driver's
specific lock.
Thus the GPE enabling/disabling/clearing operations are likely to be
performed with the driver's specific lock held while we currently cannot do
this. This is because:
1. We have the acpi_gbl_gpe_lock held before invoking the GPE driver's
handler. Driver's specific lock is likely to be held inside of the
handler, thus we can see some dead lock issues due to the reversed
locking order or recursive locking. In order to solve such dead lock
issues, we need to unlock the acpi_gbl_gpe_lock before invoking the
handler. BZ 1100.
2. Since GPE disabling/enabling/clearing should be determined by the GPE
driver's state machine, we shouldn't perform such operations inside of
ACPICA for a GPE handler to mess up the driver's state machine. BZ 1101.
Originally this patch includes a logic to flush GPE handlers, it is dropped
due to the following reasons:
1. This is a different issue;
2. Linux OSL has fixed this by flushing SCI in acpi_os_wait_events_complete().
We will pick up this topic when the Linux OSL fix turns out to be not
sufficient.
Note that currently the internal operations and the acpi_gbl_gpe_lock are
also used by ACPI_GPE_DISPATCH_METHOD and ACPI_GPE_DISPATCH_NOTIFY. In
order not to introduce regressions, we add one
ACPI_GPE_DISPATCH_RAW_HANDLER type to be distiguished from
ACPI_GPE_DISPATCH_HANDLER. For which the acpi_gbl_gpe_lock is unlocked before
invoking the GPE handler and the internal enabling/disabling operations are
bypassed to allow drivers to perform them at a proper position using the
GPE APIs and ACPI_GPE_DISPATCH_RAW_HANDLER users should invoke acpi_set_gpe()
instead of acpi_enable_gpe()/acpi_disable_gpe() to bypass the internal GPE
clearing code in acpi_enable_gpe(). Lv Zheng.
Known issues:
1. Edge-triggered GPE lost for frequent enablings
On some buggy silicon platforms, GPE enable line may not be directly
wired to the GPE trigger line. In that case, when GPE enabling is
frequently performed for edge-triggered GPEs, GPE status may stay set
without being triggered.
This patch may maginify this problem as it allows GPE enabling to be
parallel performed during the process the GPEs are handled.
This is an existing issue, because:
1. For task context:
Current ACPI_GPE_DISPATCH_METHOD practices have proven that this
isn't a real issue - we can re-enable edge-triggered GPE in a work
queue where the GPE status bit might already be set.
2. For IRQ context:
This can even happen when the GPE enabling occurs before returning
from the GPE handler and after unlocking the GPE lock.
Thus currently no code is included to protect this.
Link: https://github.com/acpica/acpica/commit/199cad16
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit e06b1624b02dc8317d144e9a6fe9d684c5fa2f90
Version 20150204.
Link: https://github.com/acpica/acpica/commit/e06b1624
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36
Link: https://github.com/acpica/acpica/commit/8990e73a
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 490ec7f7839bf7ee5e8710a34d1d1a78d54a49b6
In function acpi_hw_low_set_gpe(), cast enable_mask to u8 before
storing. The mask was read from a 32 bit register but is an 8 bit
value. Fixes Visual Studio compiler warning.
Link: https://github.com/acpica/acpica/commit/490ec7f7
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7926d5ca9452c87f866938dcea8f12e1efb58f89
There is an issue in acpi_install_gpe_handler() and acpi_remove_gpe_handler().
The code to obtain the GPE dispatcher type from the Handler->original_flags
is wrong:
if (((Handler->original_flags & ACPI_GPE_DISPATCH_METHOD) ||
(Handler->original_flags & ACPI_GPE_DISPATCH_NOTIFY)) &&
ACPI_GPE_DISPATCH_NOTIFY is 0x03 and ACPI_GPE_DISPATCH_METHOD is 0x02, thus
this statement is TRUE for the following dispatcher types:
0x01 (ACPI_GPE_DISPATCH_HANDLER): not expected
0x02 (ACPI_GPE_DISPATCH_METHOD): expected
0x03 (ACPI_GPE_DISPATCH_NOTIFY): expected
There is no functional issue due to this because Handler->original_flags is
only set in acpi_install_gpe_handler(), and an earlier checker has excluded
the ACPI_GPE_DISPATCH_HANDLER:
if ((gpe_event_info->Flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER)
{
Status = AE_ALREADY_EXISTS;
goto free_and_exit;
}
...
Handler->original_flags = (u8) (gpe_event_info->Flags &
(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK));
We need to clean this up before modifying the GPE dispatcher type values.
In order to prevent such issue from happening in the future, this patch
introduces ACPI_GPE_DISPATCH_TYPE() macro to be used to obtain the GPE
dispatcher types. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/7926d5ca
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 04f25acdd4f655ae33f83de789bb5f4b7790171c
This patch follows acpi_ev_fixed_event_detect(), which invokes
acpi_gbl_global_event_handler instead of invoking it in
acpi_ev_fixed_event_dispatch(), moves acpi_gbl_global_event_handler from
acpi_ev_gpe_dispatch() to acpi_ev_gpe_detect(). This makes further cleanups
around acpi_ev_gpe_dispatch() simpler. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/04f25acd
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b2b18bb38045404e253f10787b8a4ae6e94cdee6
This patch prevents acpi_remove_gpe_handler() from leaking the stale
gpe_event_info->Dispatch.Handler to the caller to avoid possible NULL pointer
references. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/b2b18bb3
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8e21180050270897499652e922c6a41b8eb388b6
Recent changes to acpi_ev_asynch_execute_gpe_method left Status
variable uninitialized before use. Initialize to AE_OK.
Link: https://github.com/acpica/acpica/commit/8e211800
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8823b44ff53859ab24ecfcfd3fba8cc56b17d223
Currently we rely on the logic that GPE blocks will never be deleted,
otherwise we can be broken by the race between acpi_ev_create_gpe_block(),
acpi_ev_delete_gpe_block() and acpi_ev_gpe_detect().
On the other hand, if we want to protect GPE block creation/deletion, we
need to use a different synchronization facility to protect the period
between acpi_ev_gpe_dispatch() and acpi_ev_asynch_enable_gpe(). Which leaves us
no choice but abandoning the ACPI_MTX_EVENTS used during this period.
This patch removes ACPI_MTX_EVENTS used during this period and the
acpi_ev_valid_gpe_event() to reflect current restriction. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/8823b44f
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ca10324788bc9bdaf47fa9e51145129c1299144d
This patch deletes a sanity check from acpi_ev_enable_gpe().
This kind of check is already done in
acpi_enable_gpe()/acpi_remove_gpe_handler()/acpi_update_all_gpes() before invoking
acpi_ev_enable_gpe():
1. acpi_enable_gpe(): same check (skip if DISPATCH_NONE) is now implemented.
2. acpi_remove_gpe_handler(): a more strict check (skip if !DISPATCH_HANDLER)
is implemented.
3. acpi_update_all_gpes(): a more strict check (skip if DISPATCH_NONE ||
DISPATCH_HANDLER || CAN_WAKE)
4. acpi_set_gpe(): since it is invoked by the OSPM driver where the GPE
handler is known to be available, such check isn't needed.
So we can simply remove this duplicated check from acpi_ev_enable_gpe().
Lv Zheng.
Link: https://github.com/acpica/acpica/commit/ca103247
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a back port result of the Linux commit:
Commit c50f13c672
Subject: ACPICA: Save current masks of enabled GPEs after enable register writes
Besides of the indent divergences, only a missing prototype added due to
the ACPICA internal coding style.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts
just at different offsets. To unify the parsing functions, OSPMs like Linux
need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can
extract the shared data.
This patch also synchronizes the structure changes to the Linux kernel.
The usages are searched by matching the following keywords:
1. acpi_resource_address
2. acpi_resource_extended_address
3. ACPI_RESOURCE_TYPE_ADDRESS
4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS
And we found and fixed the usages in the following files:
arch/ia64/kernel/acpi-ext.c
arch/ia64/pci/pci.c
arch/x86/pci/acpi.c
arch/x86/pci/mmconfig-shared.c
drivers/xen/xen-acpi-memhotplug.c
drivers/acpi/acpi_memhotplug.c
drivers/acpi/pci_root.c
drivers/acpi/resource.c
drivers/char/hpet.c
drivers/pnp/pnpacpi/rsparser.c
drivers/hv/vmbus_drv.c
Build tests are passed with defconfig/allnoconfig/allyesconfig and
defconfig+CONFIG_ACPI=n.
Original-by: Thomas Gleixner <tglx@linutronix.de>
Original-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA has implemented acpi_unload_parent_table() which can exactly replace
the acpi_get_id()/acpi_unload_table_id() implemented in Linux kernel. The
acpi_unload_parent_table() has been unit tested in ACPICA simulation
environment.
This patch can also help to reduce the source code differences between
Linux and ACPICA.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The QR_EC related code pieces have redundants, this patch merges them into
acpi_ec_query() which invokes acpi_ec_transaction() where EC mutex and the
global lock are already held. After doing so, query handler traversal still
need to be locked by EC mutex after invoking acpi_ec_transaction().
Note that EC event handling is sequential. We fetch one event from firmware
event queue and process it until 0x00 or error returned. So we don't need
to hold mutex for whole acpi_ec_clear() process to determine whether we
should continue to drain. And for the same reason, we don't need to hold
mutex for the whole procedure from the QR_EC transaction to the query
handler traversal.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes 2 issues related to the draining behavior. But it doesn't
implement the draining support, it only cleans up code so that further
draining support is possible.
The draining behavior is expected by some platforms (for example, Samsung)
where SCI_EVT is set only once for a set of events and might be cleared for
the very first QR_EC command issued after SCI_EVT is set. EC firmware on
such platforms will return 0x00 to indicate "no outstanding event". Thus
after seeing an SCI_EVT indication, EC driver need to fetch events until
0x00 returned (see acpi_ec_clear()).
Issue 1 - acpi_ec_submit_query():
It's reported on Samsung laptops that SCI_EVT isn't checked when the
transactions are advanced in ec_poll(), which leads to SCI_EVT triggering
source lost:
If no EC GPE IRQs are arrived after that, EC driver cannot detect this
event and handle it.
See comment 244/247 for kernel bugzilla 44161.
This patch fixes this issue by moving SCI_EVT checks into
advance_transaction(). So that SCI_EVT is checked each time we are going to
handle the EC firmware indications. And this check will happen for both IRQ
context and task context.
Since after doing that, SCI_EVT is also checked after completing a
transaction, ec_check_sci() and ec_check_sci_sync() can be removed.
Issue 2 - acpi_ec_complete_query():
We expect to clear EC_FLAGS_QUERY_PENDING to allow queuing another draining
QR_EC after writing a QR_EC command and before reading the event. After
reading the event, SCI_EVT might be cleared by the firmware, thus it may
not be possible to queue such a draining QR_EC at that time.
But putting the EC_FLAGS_QUERY_PENDING clearing code after
start_transaction() is wrong as there are chances that after
start_transaction(), QR_EC can fail to be sent. If this happens,
EC_FLAG_QUERY_PENDING will be cleared earlier. As a consequence, the
draining QR_EC will also be queued earlier than expected.
This patch also moves this code into advance_transaction() where QR_EC is
just sent (ACPI_EC_COMMAND_POLL flagged) to fix this issue.
Notes:
1. After introducing the 2 SCI_EVT related handlings into
advance_transaction(), a next QR_EC can be queued right after writing
the current QR_EC command and before reading the event. But this still
hasn't implemented the draining behavior as the draining support
requires:
If a previous returned event value isn't 0x00, a draining QR_EC need
to be issued even when SCI_EVT isn't set.
2. In this patch, acpi_os_execute() is also converted into a seperate work
item to avoid invoking kmalloc() in the atomic context. We can do this
because of the previous global lock fix.
3. Originally, EC_FLAGS_EVENT_PENDING is also used to avoid queuing up
multiple work items (created by acpi_os_execute()), this can be covered
by only using a single work item. But this patch still keeps this flag
as there are different usages in the driver initialization steps relying
on this flag.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Reported-by: Kieran Clancy <clancy.kieran@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently QR_EC is queued up on CPU 0 to be safe with SMM because there is
no global lock held for acpi_ec_gpe_query(). As we are about to move QR_EC
to a non CPU 0 bound work queue to avoid invoking kmalloc() in
advance_transaction(), we have to acquire global lock for the new QR_EC
work item to avoid regressions.
Known issue:
1. Global lock for acpi_ec_clear().
This is an existing issue that acpi_ec_clear() which invokes
acpi_ec_sync_query() also suffers from the same issue. But this patch's
target is only the code to invoke acpi_ec_sync_query() in a CPU 0 bound
work queue item, and the acpi_ec_clear() can be automatically fixed by
further patch that merges the redundant code, so it is left unchanged.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The returning value of acpi_os_execute() is erroneously handled as errno.
This patch corrects it by returning EBUSY to indicate the work queue item
creation failure.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds reference counting for query handlers in order to eliminate
kmalloc()/kfree() usage.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch moves transaction wakeup code into advance_transaction().
No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_tb_delete_namespace_by_owner() expects ACPI_MTX_INTERPRETER to be
taken. This fixes the following issue:
ACPI Error: Mutex [0x0] is not acquired, cannot release (20141107/utmutex-322)
Call Trace:
[<ffffffff81b0bd28>] dump_stack+0x4f/0x7b
[<ffffffff81546bfc>] acpi_ut_release_mutex+0x47/0x67
[<ffffffff81542cf1>] acpi_tb_delete_namespace_by_owner+0x57/0x8d
[<ffffffff81543ef1>] acpi_unload_table_id+0x3a/0x5e
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We've been sitting on our fixes branch for a while, so this batch is
unfortunately on the large side.
A lot of these are tweaks and fixes to device trees, fixing various bugs
around clocks, reg ranges, etc. There's also a few defconfig updates
(which are on the late side, no more of those).
All in all the diffstat is bigger than ideal at this time, but the nothing
in here seems particularly risky.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lJPi
-----END PGP SIGNATURE-----
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We've been sitting on our fixes branch for a while, so this batch is
unfortunately on the large side.
A lot of these are tweaks and fixes to device trees, fixing various
bugs around clocks, reg ranges, etc. There's also a few defconfig
updates (which are on the late side, no more of those).
All in all the diffstat is bigger than ideal at this time, but nothing
in here seems particularly risky"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
reset: sunxi: fix spinlock initialization
ARM: dts: disable CCI on exynos5420 based arndale-octa
drivers: bus: check cci device tree node status
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
ARM: nomadik: fix up leftover device tree pins
ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
ARM: at91/dt: sam9263: Add missing clocks to lcdc node
ARM: at91: sama5d3: dt: correct the sound route
ARM: at91/dt: sama5d4: fix the timer reg length
ARM: exynos_defconfig: Enable LM90 driver
ARM: exynos_defconfig: Enable options for display panel support
arm: dts: Use pmu_system_controller phandle for dp phy
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
...
dereference fix in the framework core code. The driver fixes vary from
fixing section mismatch warnings to preventing machines from hanging
(and preventing developers from crying).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=B+t3
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock driver fixes from Mike Turquette:
"Small number of fixes for clock drivers and a single null pointer
dereference fix in the framework core code.
The driver fixes vary from fixing section mismatch warnings to
preventing machines from hanging (and preventing developers from
crying)"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: fix possible null pointer dereference
Revert "clk: ppc-corenet: Fix Section mismatch warning"
clk: rockchip: fix deadlock possibility in cpuclk
clk: berlin: bg2q: remove non-exist "smemc" gate clock
clk: at91: keep slow clk enabled to prevent system hang
clk: rockchip: fix rk3288 cpuclk core dividers
clk: rockchip: fix rk3066 pll lock bit location
clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
This is one fix for a Multiqueue sleeping in invalid context problem and a
MAINTAINER file update for Qlogic.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJUusiiAAoJEDeqqVYsXL0MyrgH/iOi8ERmP0TJKZVEPeYacas6
YZeUw0ZsckpqgaE/PoRdkgGx6Slz4Nm2x+Dz1VEr1SWtGNIKLnAgHVP1S/Ee/4ws
0vVYd4VZ4OzT8FkjHRHeeeBj9EWSR0Zeh4eZu+eIilo9FOhJTHzy8R6vQxS9b3Hu
GzuVm2MaQHmYaAVVMnbitwj41pczLzDwDzmTBqcoh8ak8ynBiFBFgWxg+ZDyJtcZ
KRusp/nKJGuxoehHmgLI+Vor2jCrVpagyIbAqkHtn9OLZEtmaTkGrR42qlIedxZb
cUNDVysmrI8lRhkwiVD7+mT4A377MMlfjO0qFCUc+bkz1xTyyP2ABLT8IhmpO4w=
=5EBM
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is one fix for a Multiqueue sleeping in invalid context problem
and a MAINTAINER file update for Qlogic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ->queue_rq can't sleep
MAINTAINERS: Update maintainer list for qla4xxx
The commit 646cafc6 (clk: Change clk_ops->determine_rate to
return a clk_hw as the best parent) opens a possibility for
null pointer dereference, fix this.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
This reverts commit da788acb28.
That commit tried to fix the section mismatch warning by moving the
ppc_corenet_clk_driver struct to init section. This is definitely wrong
because the kernel would free the memories occupied by this struct
after boot while this driver is still registered in the driver core.
The kernel would panic when accessing this driver struct.
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Lockdep reported a possible deadlock between the cpuclk lock and for example
the i2c driver.
CPU0 CPU1
---- ----
lock(clk_lock);
local_irq_disable();
lock(&(&i2c->lock)->rlock);
lock(clk_lock);
<Interrupt>
lock(&(&i2c->lock)->rlock);
*** DEADLOCK ***
The generic clock-types of the core ccf already use spin_lock_irqsave when
touching clock registers, so do the same for the cpuclk.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: removed initialization of "flags"]
Pull dmaengine fixes from Vinod Koul:
"Two patches, the first by Andy to fix dw dmac runtime pm and second
one by me to fix the dmaengine headers in MAINTAINERS"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: balance PM runtime calls
MAINTAINERS: dmaengine: fix the header file for dmaengine
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also two PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools powerpc: Use dwfl_report_elf() instead of offline.
perf tools: Fix segfault for symbol annotation on TUI
perf test: Fix dwarf unwind using libunwind.
perf tools: Avoid build splat for syscall numbers with uclibc
perf tools: Elide strlcpy warning with uclibc
perf tools: Fix statfs.f_type data type mismatch build error with uclibc
tools: Remove bitops/hweight usage of bits in tools/perf
perf machine: Fix __machine__findnew_thread() error path
perf tools: Fix building error in x86_64 when dwarf unwind is on
perf probe: Propagate error code when write(2) failed
perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM
perf/rapl: Fix sysfs_show() initialization for RAPL PMU
User visible:
- Fix segfault when using both the map symtab viewer and annotation
in the TUI (Namhyung Kim).
Developer stuff:
- uClibc build fixes (Alexey Brodkin, Vineet Gupta).
- bitops/hweight were moved from tools/perf/ too tools/include, move
some leftovers (Arnaldo Carvalho de Melo)
- Fix dwarf unwind x86_64 build error (Namhyung Kim)
- Fix __machine__findnew_thread() error path (Namhyung Kim)
- Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim)
- Use dwfl_report_elf() instead of offline in powerpc bits to
properly handle non prelinked DSOs (Sukadev Bhattiprolu).
- Fix dwarf unwind using libunwind in 'perf test' (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUuYAMAAoJEBpxZoYYoA7146EH/3VkVgw1PS1DkdA8yn0kOj1T
Lus+VDwd6oKiDlPzIaQ7k40RqSnA6hreq6diiZdFpB1Z4eJUGgBK/mfnL40oWxod
OR6j44dmk8QaoPMN0Q4/A1Su5gEF7/Gz8ht5EXcbGYlJy+7mGajWq+uGbPYVlh2M
hhez88x4gchSGJlT3NPGXgMggKYhcElKgtfrrFmhLIPsN6UC5DEEA9+QRHKqI2iM
+8RRFU5BreUglYQ2DYheCl0nUKuiiYnvFdlFNQOi15txID/KgBpevDnxNXunH1eB
+/t60Qfz7/viuyKvZ0ZwYsVWixBXhta7x2g7EMv3111ccIJrZUM3gcK4b+hrMTE=
=moQI
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix segfault when using both the map symtab viewer and annotation
in the TUI (Namhyung Kim).
- uClibc build fixes (Alexey Brodkin, Vineet Gupta).
- bitops/hweight were moved from tools/perf/ too tools/include, move
some leftovers (Arnaldo Carvalho de Melo)
- Fix dwarf unwind x86_64 build error (Namhyung Kim)
- Fix __machine__findnew_thread() error path (Namhyung Kim)
- Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim)
- Use dwfl_report_elf() instead of offline in powerpc bits to
properly handle non prelinked DSOs (Sukadev Bhattiprolu).
- Fix dwarf unwind using libunwind in 'perf test' (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Call spin_lock_init() before the spinlocks are used, both in early init
and probe functions preventing a lockdep splat.
I have been observing lockdep complaining [1] during boot on my a80 optimus [2]
when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat,
and has been tested on a few other sunxi platforms without issue.
[1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html
[2] http://kernelci.org/boot/?a80-optimus
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Cc: <stable@vger.kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:
Renesas ARM Based SoC Fixes for v3.19
This pull request is based on the last round of SoC updates for v3.19,
Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as
renesas-soc3-for-v3.19, merged into your next/soc branch and included in
v3.19-rc1.
- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
Set .control_parent for all irqpin instances for sh73a0 SoC when booting
using legacy C.
- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
This fixes a long standing problem which has been present since
the sh73a0 SoC started using the INTC External IRQ pin driver.
The patch that introduced the problem is 341eb5465f ("ARM:
shmobile: INTC External IRQ pin driver on sh73a0") which was included
in v3.10.
* tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
The arndale-octa board was giving "imprecise external aborts" during
boot-up with MCPM enabled. CCI enablement of the boot cluster was found
to be the cause of these aborts (possibly because the secure f/w was not
allowing it). Hence, disable CCI for the arndale-octa board.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The arm-cci driver completes the probe sequence even if the cci node is
marked as disabled. Add a check in the driver to honour the cci status
in the device tree.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre:
First fixes batch for AT91 on 3.19:
- fix some DT entries
- correct clock entry for the at91sam9263 LCD
- add a phy_fixup for Eth1 on sama5d4
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
ARM: at91/dt: sam9263: Add missing clocks to lcdc node
ARM: at91: sama5d3: dt: correct the sound route
ARM: at91/dt: sama5d4: fix the timer reg length
Signed-off-by: Olof Johansson <olof@lixom.net>
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux
settings depending on the card state. This collides with a lot of assumptions.
It only works when using the internal card-detect mechanism and breaks
horribly when using either the normal card-detect via the slot-gpio function
or via any other pin. Also there is of course no link between the mmc and jtag
on the software-side, so the jtag clocks may very well be disabled when the
card is ejected and the soc switches back to the jtag pinmux.
Leaving the switching function enabled did result in mmc timeouts and rcu
stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases,
as we expect the devicetree to explicitly select either mmc or jtag pinmuxes
anyway.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: berlin: Fixes for v3.19 (round 1)" from Sebastian Hesselbarth:
Marvell Berlin fixes for v3.19 round 1:
- SDHCI DT fixes for BG2Q and BG2Q reference board
- BG2Q SM GPIO DT node relocation
* tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
Signed-off-by: Olof Johansson <olof@lixom.net>
We altered the device tree bindings for the Nomadik family of
pin controllers to be standard, this file was merged out-of-order
so we missed fixing this. Fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "omap fixes against v3.19-rc1" from Tony Lindgren:
Fixes for omaps mostly to deal with dra7 timer issues
and hypervisor mode. The other fixes are minor fixes for
various boards. The summary of the fixes is:
- Fix real-time counter rate typos for some frequencies
- Fix counter frequency drift for am572x
- Fix booting of secondary CPU in HYP mode
- Fix n900 board name for legacy user space
- Fix cpufreq in omap2plus_defconfig after Kconfig change
- Fix dra7 qspi partitions
And also, let's re-enable smc91x on some n900 boards that
we have sitting in a few test boot systems after the boot
loader dependencies got fixed.
* tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
ARM: OMAP2+: Fix n900 board name for legacy user space
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
ARM: dra7xx: Fix counter frequency drift for AM572x errata i856
ARM: omap5/dra7xx: Fix frequency typos
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: imx: fixes for 3.19" from Shawn Guo:
The i.MX fixes for 3.19:
- One fix for incorrect i.MX25 SPI1 clock assignment in device tree,
which causes system hang when accessing SPI1.
- Correct i.MX6SX QSPI parent clock configuration to fix a kernel Oops.
- Fix ULPI PHY reset modelling on imx51-babbage board to remove the
dependency on bootloader for USB3317 ULPI PHY reset.
- Correct video divider setting on i.MX6Q rev T0 1.0 to fix the issue
that HDMI is not working at high resolution on T0 1.0.
- One incremental fix for CODA960 VPU enabling in device tree to
correct interrupt order.
- LS1021A SCFG block works in BE mode, add device tree property
big-endian to make it right.
* tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: imx6sx: Set PLL2 as parent of QSPI clocks
ARM: dts: imx25: Fix the SPI1 clocks
ARM: clk-imx6q: fix video divider for rev T0 1.0
ARM: dts: imx6qdl: Fix CODA960 interrupt order
ARM: ls1021a: dtsi: add 'big-endian' property for scfg node
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: rockchip: dts fix for 3.19" from Heiko Stübner:
Increase drive-strength to sdmmc pins on rk3288-evb to fix
an issue with the fixed highspeed card detection.
* tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb
Signed-off-by: Olof Johansson <olof@lixom.net>
Avoid overflow possibility.
[ The overflow is purely theoretical, since this is used for memory
ranges that aren't even close to using the full 64 bits, but this is
the right thing to do regardless. - Linus ]
Signed-off-by: Louis Langholtz <lou_langholtz@me.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Anvin <hpa@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dwfl_report_offline() works only when libraries are prelinked.
Replace dwfl_report_offline() with dwfl_report_elf() so we correctly
extract debug info even from libraries that are not prelinked.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.
However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.
To reproduce the problem, please follow the steps below:
1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf tool fails to unwind user stack if the event raises in a shared
object. This patch improves tests/dwarf-unwind.c to demonstrate the
problem by utilizing commonly used glibc function "bsearch". If perf is
not statically linked, the testcase will try to unwind a mixed call
trace.
By debugging libunwind I found that there is a bug in unwind-libunwind:
it always passes 0 as segbase to libunwind, cause libunwind unable to
locate debug_frame entry fir first level ip address (I add some more
debugging output into libunwind to make things clear):
>_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4
>_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388
>_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc
>lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc)
...
>lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc)
>_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found
>put_rs_cache: unmasking signals/interrupts and releasing lock
>_Uarm_dwarf_step: returning -10
>_Uarm_step: dwarf_step()=-10
This patch passes map->start as segbase to dwarf_find_debug_frame(), so
di will be initialized correctly.
In addition, dso and executable are different when setting segbase. This
patch first check whether the elf is executable, and pass segbase only
for shared object.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers)
Also seen on ARM uClibc based tools
------- ARC build ---------->8-------------
CC util/evlist.o
In file included from
~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0,
from util/../perf-sys.h:10,
from util/../perf.h:15,
from util/event.h:7,
from util/event.c:3:
~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0:
warning: "__NR_fcntl64" redefined [enabled by default]
#define __NR_fcntl64 __NR3264_fcntl
^
In file included from
~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0,
from util/../perf-sys.h:6,
----------------->8-------------------
------- ARM build ---------->8-------------
CC FPIC plugin_scsi.o
In file included from util/../perf-sys.h:9:0,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0:
warning: "__NR_restart_syscall" redefined [enabled by default]
In file included from
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0,
from util/../perf-sys.h:6,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0:
note: this is the location of the previous definition
----------------->8-------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
