Today, PAGE_NONE is defined as a page not having _PAGE_USER.
In some circunstances, when the CPU supports it, it might be
better to be able to flag a page with NO ACCESS.
In a following patch, the 8xx will switch user access being flagged
in the PMD, therefore it will not be possible anymore to use
_PAGE_USER as a way to flag a page with no access.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit ac29c64089 ("powerpc/mm: Replace _PAGE_USER with
_PAGE_PRIVILEGED") introduced _PAGE_PRIVILEGED for BOOK3S/64
This patch generalises _PAGE_PRIVILEGED for all CPUs, allowing
to have either _PAGE_PRIVILEGED or _PAGE_USER or both.
PPC_8xx has a _PAGE_SHARED flag which is set for and only for
all non user pages. Lets rename it _PAGE_PRIVILEGED to remove
confusion as it has nothing to do with Linux shared pages.
On BookE, there's a _PAGE_BAP_SR which has to be set for kernel
pages: defining _PAGE_PRIVILEGED as _PAGE_BAP_SR will make
this generic
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_PAGE_WRITETHRU is only used in:
* AMIGA_Z2RAM block driver which is never activated on powerPC
* Video/FB driver which is for PPC_PMAC
Therefore, no need to spend time in 8xx TLB miss handlers for
handling it.
And by removing it, we free up bit 20 which then avoids having
to clear it on each TLB miss.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In TLB miss handlers, updating the perf counter is only useful
when performing a perf analysis. As it has a noticeable overhead,
let's only do it when needed.
In order to do so, the exit of the miss handlers will be patched
when starting/stopping 'perf': the first register restore
instruction of each exit point will be replaced by a jump to
the counting code.
Once this is done, CONFIG_PPC_8xx_PERF_EVENT becomes useless as
this feature doesn't add any overhead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXCEPTION_PROLOG_0 and EXCEPTION_EPILOG_0 were added some
time ago in order to regroup the two mtspr/mfspr to SCRATCH0 and
SCRATCH1 and the mfcr/mtcr in order to ease entry and exit of
function not using the full EXCEPTION_PROLOG.
Since then, the mfcr/mtcr has been taken out, hence just leaving
the two mtspr/mfspr in the macro.
In order to improve readability of the exception functions, we
remove those two macros and copy back the two mtspr/mfspr instead.
As r10 and r11 are used for SCRATCH0 and SCRATCH1, lets also use
r12 for SCRATCH2. It will also improve the readability/maintenance.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CPU6 ERRATA affects only MPC860 revisions prior to C.0. Manufacturing
of those revisiosn was stopped in 1999-2000.
Therefore, it has been almost 20 years since this ERRATA has been
fixed in the silicon.
This patch removes the workaround for that ERRATA.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE
muram"), rheap is not used anymore.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Certain HMI's such as malfunction error propagate through
all threads/core on the system. If a thread was offline
prior to us crashing the system and jumping to the kdump
kernel, bad things happen when it wakes up due to an HMI
in the kdump kernel.
There are several possible ways to solve this problem
1. Put the offline cores in a state such that they are
not woken up for machine check and HMI errors. This
does not work, since we might need to wake up offline
threads to handle TB errors
2. Ignore HMI errors, setup HMEER to mask HMI errors,
but this still leads the window open for any MCEs
and masking them for the duration of the dump might
be a concern
3. Wake up offline CPUs, as in send them to
crash_ipi_callback (not wake them up as in mark them
online as seen by the hotplug). kexec does a
wake_online_cpus() call, this patch does something
similar, but instead sends an IPI and forces them to
crash_ipi_callback()
This patch takes approach #3.
Care is taken to enable this only for powenv platforms
via crash_wake_offline (a global value set at setup
time). The crash code sends out IPI's to all CPU's
which then move to crash_ipi_callback and kexec_smp_wait().
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Our check was extra cautious, we've audited crash_send_ipi
and it sends an IPI only to online CPU's. Removal of this
check should have not functional impact on crash kdump.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of manually coding the loop with of_find_node_by_type(), let's
switch to the standard macro for iterating over nodes with given type.
Also fixed a couple of refcount leaks in the aforementioned loops.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch remove CONFIG_PPC_HTDUMP if not PPC_BOOK3S_64 to avoid
below compile failure on BOOK3S_32:
In file included from arch/powerpc/mm/dump_hashpagetable.c:27:0:
./arch/powerpc/include/asm/plpar_wrappers.h: In function 'get_cede_latency_hint':
./arch/powerpc/include/asm/plpar_wrappers.h:27:2: error: implicit declaration of function 'get_lppaca' [-Werror=implicit-function-declaration]
...
arch/powerpc/mm/dump_hashpagetable.c: At top level:
arch/powerpc/mm/dump_hashpagetable.c:69:13: error: 'SLB_VSID_B' undeclared here (not in a function)
...
arch/powerpc/mm/dump_hashpagetable.c:506:38: error: 'VMEMMAP_BASE' undeclared (first use in this function)
arch/powerpc/mm/dump_hashpagetable.c:506:35: error: assignment makes integer from pointer without a cast [-Werror]
Fixes: dd5ac03e09 ("powerpc/mm: Fix page table dump build on non-Book3S")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Trim change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add required bits to the architecture vector to enable support
of the ibm,dynamic-memory-v2 device tree property.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Power Hypervisor has introduced a new device tree format for
the property describing the dynamic reconfiguration LMBs for a system,
ibm,dynamic-memory-v2. This new format condenses the size of the
property, especially on large memory systems, by reporting sets
of LMBs that have the same properties (flags and associativity array
index).
This patch updates the powerpc/mm/drmem.c code to provide routines
that can parse the new device tree format during the walk_drmem_lmb*
routines used during boot, the creation of the LMB array, and updating
the device tree to create a new property in the proper format for
ibm,dynamic-memory-v2.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that the powerpc code parses dynamic reconfiguration memory
LMB information from the LMB array and not the device tree
directly we can move the of_drconf_cell struct to drmem.h where
it fits better.
In addition, the struct is renamed to of_drconf_cell_v1 in
anticipation of upcoming support for version 2 of the dynamic
reconfiguration property and the members are typed as __be*
values to reflect how they exist in the device tree.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the pseries memory hotplug code to use the newly added
dynamic reconfiguration LMB array. Doing this is required for the
upcoming support of version 2 of the dynamic reconfiguration
device tree property.
In addition, making this change cleans up the code that parses the
LMB information as we no longer need to worry about device tree
format. This allows us to discard one of the first steps on memory
hotplug where we make a working copy of the device tree property and
convert the entire property to cpu format. Instead we just use the
LMB array directly while holding the memory hotplug lock.
This patch also moves the updating of the device tree property to
powerpc/mm/drmem.c. This allows to the hotplug code to work without
needing to know the device tree format and provides a single
routine for updating the device tree property. This new routine
will handle determination of the proper device tree format and
generate a properly formatted device tree property.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update code in powerpc/numa.c to use the walk_drmem_lmbs()
routine instead of parsing the device tree directly. This is
in anticipation of introducing a new ibm,dynamic-memory-v2
property with a different format. This will allow the numa code
to use a single initialization routine per-LMB irregardless of
the device tree format.
Additionally, to support additional routines in numa.c that need
to look up LMB information, an late_init routine is added to drmem.c
to allocate the array of LMB information. This LMB array will provide
per-LMB information to separate the LMB data from the device tree
format.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently have code to parse the dynamic reconfiguration LMB
information from the ibm,dynamic-meory device tree property in
multiple locations; numa.c, prom.c, and pseries/hotplug-memory.c.
In anticipation of adding support for a version 2 of the
ibm,dynamic-memory property this patch aims to separate the device
tree information from the device tree format.
Doing this requires a two step process to avoid a possibly very large
bootmem allocation early in boot. During initial boot, new routines
are provided to walk the device tree property and make a call-back
for each LMB.
The second step (introduced in later patches) will allocate an
array of LMB information that can be used directly without needing
to know the DT format.
This approach provides the benefit of consolidating the device tree
property parsing to a single location and (eventually) providing
a common data structure for retrieving LMB information.
This patch introduces a routine to walk the ibm,dynamic-memory
property in the flattened device tree and updates the prom.c code
to use this to initialize memory.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the associativity arrays in of_drconf_to_nid_single when
deriving the nid for a LMB instead of having it passed in as a
parameter.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the device node for the usable memory property instead
of having it passed in as a parameter. This changes precedes an update
in which the calling routines for of_get_usable_memory() will not have
the device node pointer to pass in.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the device node for the associativity array property instead
of having it passed in as a parameter. This changes precedes an update
in which the calling routines for of_get_assoc_arrays() will not have
the device node pointer to pass in.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a test case of the error code reported when we take a SEGV on a
mapped but inaccessible area. We broke this recently.
Based on a test case from John Sperbeck <jsperbeck@google.com>.
Acked-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using _PAGE_USER access instead of _PAGE_PRESENT.
Also add pte_user check just to make sure we are not accessing kernel
mapping.
Even though there is code duplication, keeping the low level pte
accessors different for different platforms helps in code readability.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using RWX access instead of _PAGE_PRESENT. Also
add pte_user check just to make sure we are not accessing kernel
mapping.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No functional change in this patch. This update gup_hugepte to use the
helper. This will help later when we add memory keys.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The H_PAGE_F_SECOND,H_PAGE_F_GIX are not in the 64K main-PTE.
capture these changes in the dump pte report.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
replace redundant code in __hash_page_4K() and flush_hash_page()
with helper functions pte_get_hash_gslot() and pte_set_hidx()
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We need PTE bits 3 ,4, 5, 6 and 57 to support protection-keys,
because these are the bits we want to consolidate on across all
configuration to support protection keys.
Bit 3,4,5 and 6 are currently used on 4K-pte kernels. But bit 9
and 10 are available. Hence we use the two available bits and
free up bit 5 and 6. We will still not be able to free up bit 3
and 4. In the absence of any other free bits, we will have to
stay satisfied with what we have :-(. This means we will not
be able to support 32 protection keys, but only 8. The bit
numbers are big-endian as defined in the ISA3.0
This patch does the following change to 4K PTE.
H_PAGE_F_SECOND (S) which occupied bit 4 moves to bit 7.
H_PAGE_F_GIX (G,I,X) which occupied bit 5, 6 and 7 also moves
to bit 8,9, 10 respectively.
H_PAGE_HASHPTE (H) which occupied bit 8 moves to bit 4.
Before the patch, the 4k PTE format was as follows
0 1 2 3 4 5 6 7 8 9 10....................57.....63
: : : : : : : : : : : : :
v v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|S |G |I |X |H| | |x|x|................| |x|x|x|
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
After the patch, the 4k PTE format is as follows
0 1 2 3 4 5 6 7 8 9 10....................57.....63
: : : : : : : : : : : : :
v v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|H | | |S |G|I|X|x|x|................| |.|.|.|
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
The patch has no code changes; just swizzles around bits.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
0xf is considered invalid hidx value. It indicates absence of a backing
HPTE. A PTE is initialized to 0xf either
a) when it is new it is newly allocated to hold 4k-backing-HPTE
or
b) Any time it gets demoted to a 4k-backing-HPTE
This patch shifts the representation by one-modulo-0xf; i.e hidx 0 is
represented as 1, 1 as 2,... , and 0xf as 0. This convention lets us
initialize the secondary-part of the PTE to all zeroes. PTEs are anyway
zero'd when allocated. We do not have to zero them again; thus saving on
the initialization.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6
in the 64K backed HPTE pages. This along with the earlier
patch will entirely free up the four bits from 64K PTE.
The bit numbers are big-endian as defined in the ISA3.0
This patch does the following change to 64K PTE backed
by 64K HPTE.
H_PAGE_F_SECOND (S) which occupied bit 4 moves to the
second part of the pte to bit 60.
H_PAGE_F_GIX (G,I,X) which occupied bit 5, 6 and 7 also
moves to the second part of the pte to bit 61,
62, 63, 64 respectively
since bit 7 is now freed up, we move H_PAGE_BUSY (B) from
bit 9 to bit 7.
The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.
NOTE: None of the bits in the secondary PTE were not used
by 64k-HPTE backed PTE.
Before the patch, the 64K HPTE backed 64k PTE format was
as follows
0 1 2 3 4 5 6 7 8 9 10...........................63
: : : : : : : : : : : :
v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |S |G |I |X |x|B| |x|x|................|x|x|x|x| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | | | | | | | | | |..................| | | | | <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'
After the patch, the 64k HPTE backed 64k PTE format is
as follows
0 1 2 3 4 5 6 7 8 9 10...........................63
: : : : : : : : : : : :
v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| | | | |B |x| | |x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | | | | | | | | | |..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'
The above PTE changes is applicable to hugetlbpages aswell.
The patch does the following code changes:
a) moves the H_PAGE_F_SECOND and H_PAGE_F_GIX to 4k PTE
header since it is no more needed b the 64k PTEs.
b) abstracts out __real_pte() and __rpte_to_hidx() so the
caller need not know the bit location of the slot.
c) moves the slot bits to the secondary pte.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6,
in the 4K backed HPTE pages.These bits continue to be used
for 64K backed HPTE pages in this patch, but will be freed
up in the next patch. The bit numbers are big-endian as
defined in the ISA3.0
The patch does the following change to the 4k HTPE backed
64K PTE's format.
H_PAGE_BUSY moves from bit 3 to bit 9 (B bit in the figure
below)
V0 which occupied bit 4 is not used anymore.
V1 which occupied bit 5 is not used anymore.
V2 which occupied bit 6 is not used anymore.
V3 which occupied bit 7 is not used anymore.
Before the patch, the 4k backed 64k PTE format was as follows
0 1 2 3 4 5 6 7 8 9 10...........................63
: : : : : : : : : : : :
v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|V0|V1|V2|V3|x| | |x|x|................|x|x|x|x| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
|S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'
After the patch, the 4k backed 64k PTE format is as follows
0 1 2 3 4 5 6 7 8 9 10...........................63
: : : : : : : : : : : :
v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| | | | | |x|B| |x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
|S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'
the four bits S,G,I,X (one quadruplet per 4k HPTE) that
cache the hash-bucket slot value, is initialized to
1,1,1,1 indicating -- an invalid slot. If a HPTE gets
cached in a 1111 slot(i.e 7th slot of secondary hash
bucket), it is released immediately. In other words,
even though 1111 is a valid slot value in the hash
bucket, we consider it invalid and release the slot and
the HPTE. This gives us the opportunity to determine
the validity of S,G,I,X bits based on its contents and
not on any of the bits V0,V1,V2 or V3 in the primary PTE
When we release a HPTE cached in the 1111 slot
we also release a legitimate slot in the primary
hash bucket and unmap its corresponding HPTE. This
is to ensure that we do get a HPTE cached in a slot
of the primary hash bucket, the next time we retry.
Though treating 1111 slot as invalid, reduces the
number of available slots in the hash bucket and may
have an effect on the performance, the probabilty of
hitting a 1111 slot is extermely low.
Compared to the current scheme, the above scheme
reduces the number of false hash table updates
significantly and has the added advantage of releasing
four valuable PTE bits for other purpose.
NOTE:even though bits 3, 4, 5, 6, 7 are not used when
the 64K PTE is backed by 4k HPTE, they continue to be
used if the PTE gets backed by 64k HPTE. The next
patch will decouple that aswell, and truely release the
bits.
This idea was jointly developed by Paul Mackerras,
Aneesh, Michael Ellermen and myself.
4K PTE format remains unchanged currently.
The patch does the following code changes
a) PTE flags are split between 64k and 4k header files.
b) __hash_page_4K() is reimplemented to reflect the
above logic.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce pte_get_hash_gslot()() which returns the global slot number of
the HPTE in the global hash table.
This function will come in handy as we work towards re-arranging the PTE
bits in the later patches.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce pte_set_hidx().It sets the (H_PAGE_F_SECOND|H_PAGE_F_GIX) bits
at the appropriate location in the PTE of 4K PTE. For 64K PTE, it sets
the bits in the second part of the PTE. Though the implementation for
the former just needs the slot parameter, it does take some additional
parameters to keep the prototype consistent.
This function will be handy as we work towards re-arranging the bits in
the subsequent patches.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC 7 will take "r2" in clobber list as an error and it will get
following build errors for powerpc ptrace selftests even with -fno-pic
option:
ptrace-tm-vsx.c: In function ‘tm_vsx’:
ptrace-tm-vsx.c:42:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-vsx] Error 1
ptrace-tm-spd-vsx.c: In function ‘tm_spd_vsx’:
ptrace-tm-spd-vsx.c:55:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-spd-vsx] Error 1
ptrace-tm-spr.c: In function ‘tm_spr’:
ptrace-tm-spr.c:46:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
Fix the build error by removing "r2" from the clobber list. None of
these asm blocks actually clobber r2.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a pci_vf_drivers_autoprobe() interface. Setting autoprobe to false
on the PF prevents drivers from binding to VFs when they are enabled.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add calls for pseries platform to configure/deconfigure SR-IOV.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@us.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
SR-IOV can now be enabled for the powernv platform and pseries
platform. Therefore move the appropriate calls to machine dependent
code instead of relying on definition at compile time.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@us.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc64 gcc can generate code that offsets an address, to access
part of an object in memory. If the address is a -mcmodel=medium toc
pointer relative address then code like the following is possible.
addis r9,r2,var@toc@ha
ld r3,var@toc@l(r9)
ld r4,(var+8)@toc@l(r9)
This works fine so long as var is naturally aligned, *and* r2 is
sufficiently aligned. If not, there is a possibility that the offset
added to access var+8 wraps over a n*64k+32k boundary. Modules don't
have any guarantee that r2 is sufficiently aligned. Moreover, code
generated by older compilers generates a .toc section with 2**0
alignment, which can result in relocation failures at module load time
even without the wrap problem.
Thus, this patch links modules with an aligned .toc section (Makefile
and module.lds changes), and forces alignment for out of tree modules
or those without a .toc section (module_64.c changes).
Signed-off-by: Alan Modra <amodra@gmail.com>
[desnesn: updated patch to apply to powerpc-next kernel v4.15 ]
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com>
[mpe: Fix out-of-tree build, swap -256 for ~0xff, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When an interrupt is returning to a soft-disabled context (which can
happen for non-maskable interrupts or synchronous interrupts), it goes
through the motions of soft-disabling again, including calling
TRACE_DISABLE_INTS (i.e., trace_hardirqs_off()).
This is not necessary, because we must already be soft-disabled in the
interrupt context, it also may be causing crashes in the irq tracing
code to re-enter as an nmi. Replace it with a warning to ensure that
soft-interrupts are still disabled.
Fixes: 7c0482e3d0 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add irq error handlers for cmu, plb, opb, mcue, conf
with debug information output in case of problems.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
TVSENSE(temperature and voltage sensors) reset is blocked (clock gated)
by the POR default of the TVS sleep config bit. As a consequence,
TVSENSE will provide erratic sensor values, which may result in
spurious (parity) errors recorded in the CMU FIR and leading to
erroneous interrupt requests once the CMU interrupt is unmasked.
Purpose of this to set up CMU in working state in any cases even
in case of parity errors.
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* clear out any possible plb6 errors
* board interrupt handling setup within l2 reg set
* fsp2 parity error setup
All those points are needed for correct interrupt
handling on board level including error handling report.
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Match powerpc/64 and include .data.rel* input sections in the .data output
section explicitly.
This solves the warning:
powerpc-linux-gnu-ld: warning: orphan section `.data.rel.ro' from `arch/powerpc/kernel/head_44x.o' being placed in section `.data.rel.ro'.
Link: https://lists.01.org/pipermail/kbuild-all/2017-November/040010.html
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As far as I can tell CONFIG_CPM is the right symbol to use to
conditionally compile the cpm-serial.c code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only build the OPAL console code in when necessary. This looks like it
should use CONFIG_PPC_POWERNV, but because the opal-call.S code is
64-bit only, we must only build it when we're building the boot
wrapper 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The serial code in uartlite.c only matches if we find one of two
Xilinx (xlnx) nodes in the device tree, there's no need to build or
link the code on other platforms.
As far as I can tell CONFIG_XILINX_VIRTEX is the appropriate symbol to
use to conditionally compile the code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Print the function address associated with the restore_r2() error to
make it easier to debug the problem.
Also clarify the wording a bit.
Before:
module_64: patch_foo: Expect noop after relocate, got 3c820000
After:
module_64: patch_foo: Expected nop after call, got 7c630034 at netdev_has_upper_dev+0x54/0xb0 [patch_foo]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
[mpe: Change noop to nop, as that's the name of the instruction]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When attempting to load a livepatch module, I got the following error:
module_64: patch_module: Expect noop after relocate, got 3c820000
The error was triggered by the following code in
unregister_netdevice_queue():
14c: 00 00 00 48 b 14c <unregister_netdevice_queue+0x14c>
14c: R_PPC64_REL24 net_set_todo
150: 00 00 82 3c addis r4,r2,0
GCC didn't insert a nop after the branch to net_set_todo() because it's
a sibling call, so it never returns. The nop isn't needed after the
branch in that case.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Livepatch re-uses module loader function apply_relocate_add() to write
relocations, instead of managing them by arch-dependent
klp_write_module_reloc() function.
apply_relocate_add() doesn't understand livepatch symbols (marked with
SHN_LIVEPATCH symbol section index) and assumes them to be local
symbols by default for R_PPC64_REL24 relocation type. It fails with an
error, when trying to calculate offset with local_entry_offset():
module_64: kpatch_meminfo: REL24 -1152921504897399800 out of range!
Whereas livepatch symbols are essentially SHN_UNDEF, should be called
via stub used for global calls. This issue can be fixed by teaching
apply_relocate_add() to handle both SHN_UNDEF/SHN_LIVEPATCH symbols
via the same stub. This patch extends SHN_UNDEF code to handle
livepatch symbols too.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This message isn't terribly useful.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
