Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.
Fixes: 846aef1d7c ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from platform_device_id table.
Fixes: 9d8a7be88b ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815084923.756476-1-liuyuntao12@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AFE Control Register 0 to the volatile_register.
AFE_DAC_CON0 can be modified by both the SOF and ALSA drivers.
If this register is read and written in cache mode, the cached value
might not reflect the actual value when the register is modified by
another driver. It can cause playback or capture failures. Therefore,
it is necessary to add AFE_DAC_CON0 to the list of volatile registers.
Signed-off-by: YR Yang <yr.yang@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20240801084326.1472-1-yr.yang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device never comes online from a reset/shutdown state, because the
driver de-asserts reset GPIO when requesting it but then, at the end of
probe() through wcd937x_reset(), leaves it asserted.
Cc: stable@vger.kernel.org
Fixes: 9be3ec196d ("ASoC: codecs: wcd937x: add wcd937x codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114913.40022-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There was no active maintenance from Banajit Goswami - last email is
from 2019 - so make obvious that Qualcomm sound drivers are maintained
by only one person.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240730103511.21728-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Addition of 'dsp_intr_base' to ACP error register offsets points to
wrong register offsets in irq handler. Correct the acp error register
offsets. ACP error status register offset and acp error reason register
offset got changed from ACP6.0 onwards. Add 'acp_error_stat' and
'acp_sw0_i2s_err_reason' as descriptor fields in sof_amd_acp_desc
structure and update the values based on the ACP variant.
>From Rembrandt platform onwards, errors related to SW1 Soundwire manager
instance/I2S controller connected on P1 power tile is reported with
ACP_SW1_I2S_ERROR_REASON register. Add conditional check for the same.
Fixes: 96eb818510 ("ASoC: SOF: amd: add interrupt handling for SoundWire manager devices")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code modifies IRAM and DRAM size after sha dma start for
vangogh platform. The problem with this sequence is that it might cause
sha dma failure when firmware code binary size is greater than the default
IRAM size. To fix this issue, Move the iram-dram fence register sequence
prior to sha dma start.
Fixes: 094d11768f ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Dmitry Baryshkov <dmitry.baryshkov@linaro.org>:
While debugging broken audio issues on some of Qualcomm platforms I
stumbled upon the kernel not providing the actual error information.
It prints an error from the wsa_macro driver, but the actual issue is in
the VA macro driver. Add error message to point to the actual error
location.
va_macro 3370000.codec: Unknown VA Codec version, ID: 00 / 0f / 00
wsa_macro 3240000.codec: Unsupported Codec version (0)
Device tuning files made with early revision tooling may contain
configuration that can unmask IRQ signals that are owned by the host.
Adding a safe default to the regmap patch ensures that the hardware
matches the driver expectations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807142648.46932-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PREEMPT_RT enabled a spinlock_t becomes a sleeping lock.
This is usually not a problem with spinlocks used in IRQ context since
IRQ handlers get threaded. However, if IRQF_ONESHOT is set, the primary
handler won't be force-threaded and runs always in hardirq context. This is
a problem because spinlock_t requires a preemptible context on PREEMPT_RT.
In this particular instance, regmap mmio uses spinlock_t to protect the
register access and IRQF_ONESHOT is set on the IRQ. In this case, it is
actually better to do everything in threaded handler and it solves the
problem with PREEMPT_RT.
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/linux-amlogic/20240729131652.3012327-1-avkrasnov@salutedevices.com
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: b11d26660d ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240807162705.4024136-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that most kernel work on sound has moved over to the linux-sound
mailing list so should the Cirrus Logic audio parts.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807140140.421359-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9390/WCD9395 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9340/WCD9341 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9370/WCD9375 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We find that we need to set snd_jack_types to 0. If not,
there will be a probability of button detection errors
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240807025356.24904-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo Thinkpad E14 Gen 6 (model type 21M3)
needs a quirk entry for internal mic to work.
Signed-off-by: Krzysztof Stępniak <kfs.szk@gmail.com>
Link: https://patch.msgid.link/20240807001219.1147-1-kfs.szk@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Warn the users if the driver doesn't know the codec version. This helps
in debugging the issues with other codec not detecting the correct
version.
va_macro 3370000.codec: Unknown VA Codec version, ID: 00 / 0f / 00
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240803-codec-version-v1-2-bc29baa5e417@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing cases to lpass_macro_get_codec_version_string() to let it
print the correct codec version for 1.x codec platforms.
Fixes: 378918d591 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240803-codec-version-v1-1-bc29baa5e417@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
This pair of patches extend wm_adsp to add a callback that can be used
to control whether ALSA controls are added and then tweak cs35l56 to use
it to suppress controls made from firmware coefficients.
Use the late-read buffer in the CS35L56 SoundWire interface to
read OTP memory.
The OTP memory has a longer access latency than chip registers
and cannot guarantee to return the data value in the SoundWire
control response if the bus clock is >4.8 MHz. The Cirrus
SoundWire peripheral IP exposes the bridge-to-bus read buffer
and status bits. For a read from OTP the bridge status bits are
polled to wait for the OTP data to be loaded into the read buffer
and the data is then read from there.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e1830f66f6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Link: https://patch.msgid.link/20240805140839.26042-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent changes that started checking the codec version broke audio on
the Lenovo ThinkPad X13s:
wsa_macro 3240000.codec: Unsupported Codec version (0)
wsa_macro 3240000.codec: probe with driver wsa_macro failed with error -22
rx_macro 3200000.rxmacro: Unsupported Codec version (0)
rx_macro 3200000.rxmacro: probe with driver rx_macro failed with error -22
Add the missing codec version to the lookup table so that the codec
drivers probe successfully.
Note that I'm just assuming that this is a 2.0 codec based on the fact
that this device uses the older register layout.
Fixes: 378918d591 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Fixes: dbacef0589 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions")
Fixes: 727de4fbc5 ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240729131351.27886-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Call efi_rt_services_supported() to check that efi.get_variable exists
before calling it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1cad8725f2 ("ASoC: cs-amp-lib: Add helpers for factory calibration data")
Link: https://patch.msgid.link/20240805114222.15722-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A number of laptops have gone to market with old firmware versions that
export controls that have since been hidden, but we can't just install a
newer firmware because the firmware for each product is customized and
qualified by the OEM. The issue is that alsactl save and restore has no
idea what controls are good to persist which can lead to
misconfiguration.
There is no reason that the UCM or user should need to interact with any
of the ALSA controls for the firmware coefficients so they can be
removed entirely.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240805102721.30102-3-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The callback allows codec drivers to affect how firmware coefficients
are added as controls.
For example a codec driver may selectively add controls by choosing to
call wm_adsp_control_add() based on some filter logic.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240805102721.30102-2-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The microphone/speaker privacy shutter ALSA control handlers need to
call pm_runtime_resume, since the hardware needs to be powered up to
check the hardware state of the shutter. The IRQ handler for the
shutters also needs to notify the ALSA control to inform user-space
the shutters updated. However this leads to a mutex inversion,
between the sdw_dev_lock and the controls_rwsem.
To avoid this mutex inversion cache the kctl pointers before the IRQ
handler, which avoids the need to lookup the control and take the
controls_rwsem.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new helper functions snd_soc_component_get_kcontrol() and
snd_soc_component_get_kcontrol_locked() that returns a kcontrol
by name, but will factor in the components name_prefix, to handle
situations where multiple components are present with the same
controls.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Default firmware shipped in open source are not licensed for 3P
libraries, therefore topologies should not reference them.
If a OS wants to use 3P (that they have licensed) then they should use
the appropriate topology override mechanisms.
Fixes: 8a7d5d85ed ("ASoC: SOF: mediatek: mt8195: Add devicetree support to select topologies")
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Wojciech Macek <wmacek@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240731212153.921327-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
NAU8822 codec PLL parameters are not an information that the general
user should care about, this print is supposed to be used for debugging,
adjust the debug print priority accordingly.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20240731114828.61238-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There are some register difference for i.MX8 and i.MX9
REG_MICFIL_FIFO_CTRL definition is updated.
REG_MICFIL_FSYNC_CTRL, REG_MICFIL_VERID, REG_MICFIL_PARAM are added from
i.MX9.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Incorrect mask of Soundwire ports - one bit too long/big - was passed.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Not adding Cc-stable because I don't think the issue can lead to real
out-of-bounds read.
This patch addresses a regression in the ASoC STI drivers that was
introduced in Linux version 6.6.y. The issue originated from a series of
patches (see https://lore.kernel.org/all/87wmy5b0wt.wl-kuninori.morimoto.gx@renesas.com/)
that unintentionally omitted necessary probe functions for the player
and reader components.
Probe function in `sound/soc/sti/sti_uniperif.c:415` is being replaced
by another probe function located at `sound/soc/sti/sti_uniperif.c:453`,
which should instead be derived from the player and reader components.
This patch correctly reinserts the missing probe entries,
restoring the intended functionality.
Fixes: 9f625f5e6c ("ASoC: sti: merge DAI call back functions into ops")
Signed-off-by: Jerome Audu <jau@free.fr>
Link: https://patch.msgid.link/20240727-sti-audio-fix-v2-1-208bde546c3f@free.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WSA884X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA884X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA884X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: aa21a7d4f6 ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-6-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WSA883X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA883X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA883X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-5-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WSA881X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA881X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA881X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-4-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WCD939X_MAX_TX_SWR_PORTS (or WCD939X_MAX_RX_SWR_PORTS
for sink) number of ports and the array assigned to prop.src_dpn_prop
and prop.sink_dpn_prop has 0..WCD939X_MAX_TX_SWR_PORTS-1 elements. On
the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WCD939X_MAX_TX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-3-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WCD938X_MAX_SWR_PORTS number of ports and the array
assigned to prop.src_dpn_prop and prop.sink_dpn_prop has
0..WCD938X_MAX_SWR_PORTS-1 elements. On the other hand, GENMASK(high,
low) creates an inclusive mask between <high, low>, so we need the mask
from 0 up to WCD938X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-2-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WCD937X_MAX_TX_SWR_PORTS (or WCD937X_MAX_SWR_PORTS
for sink) number of ports and the array assigned to prop.src_dpn_prop
and prop.sink_dpn_prop has 0..WCD937X_MAX_TX_SWR_PORTS-1 elements. On
the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WCD937X_MAX_TX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: c99a515ff1 ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-1-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX9x platforms, the REG_MICFIL_FSYNC_CTRL, REG_MICFIL_VERID,
REG_MICFIL_PARAM are added, but they are not existed on i.MX8x
platforms.
Use the existed micfil->soc->use_verid to distinguish the access
permission for these platforms.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1721897694-6088-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the i.MX9x platforms, the mask of FIFO watermark
is 0x1F, on i.MX8x platforms, the mask of FIFO watermark
is 0X7. So use the mask 0x1F for all platforms to make them
compatible.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1721897694-6088-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts, which
is an error with the latest Clang
-----BEGIN PGP SIGNATURE-----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=HYew
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
