The f_frsize maybe changed in the quota size is less than the defualt
4MB.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the quota is approaching we need to notify it to the MDS as
soon as possible, or the client could write to the directory more
than expected.
This will flush the dirty caps without delaying after each write,
though this couldn't prevent the real size of a directory exceed
the quota but could prevent it as soon as possible.
Link: https://tracker.ceph.com/issues/56180
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should be better to check pointer firstly, then assign it
to c->rules[]. Refine code a little bit.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the 'i_inline_version' is 1, that means the file is just new
created and there shouldn't have any inline data in it, we should
skip retrieving the inline data from MDS.
This also could help reduce possiblity of dead lock issue introduce
by the inline data and Fcr caps.
Gradually we will remove the inline feature from kclient after ceph's
scrub too have support to unline the inline data, currently this
could help reduce the teuthology test failures.
This is possiblly could also fix a bug that for some old clients if
they couldn't explictly uninline the inline data when writing, the
inline version will keep as 1 always. We may always reading non-exist
data from inline data.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For async create we will always try to choose the auth MDS of frag
the dentry belonged to of the parent directory to send the request
and ususally this works fine, but if the MDS migrated the directory
to another MDS before it could be handled the request will be
forwarded. And then the auth cap will be changed.
We need to update the auth cap in this case before the request is
forwarded.
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The 'old_size' is a __le64 type since birth, not sure why the
kclient incorrectly switched it to __le32. This change is okay
won't break anything because union will always allocate more memory
than the 'open' member needed.
Rename 'file_replication' to 'pool' as ceph did. Though this 'open'
struct may never be used in kclient in future, it's confusing when
going through the ceph code.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Willy requested that we change this back to warning on folio->private
being non-NULl. He's trying to kill off the PG_private flag, and so we'd
like to catch where it's non-NULL.
Add a VM_WARN_ON_FOLIO (since it doesn't exist yet) and change over to
using that instead of VM_BUG_ON_FOLIO along with testing the ->private
pointer.
[ xiubli: define VM_WARN_ON_FOLIO macro in case DEBUG_VM is disabled
reported by kernel test robot <lkp@intel.com> ]
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
"was_async" is a bit misleadingly named. It's supposed to indicate
whether it's safe to call blocking operations from the context you're
calling it from, but it sounds like it's asking whether this was done
via async operation. For ceph, this it's always called from kernel
thread context so it should be safe to set this to false.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There's no reason we need to lock the inode for write in order to handle
an llseek. I suspect this should have been dropped in 2013 when we
stopped doing vmtruncate in llseek.
With that gone, ceph_llseek is functionally equivalent to
generic_file_llseek, so just call that after getting the size.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The incorrect comment is misleading. Acutally the last members
in ceph_mds_caps strcut is a union for none export and export
bodies.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is
held and the function is expected to release it before returning. It
currently fails to do that in all cases which could lead to a deadlock.
Fixes: 6f05b30ea0 ("ceph: reset i_requested_max_size if file write is not wanted")
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The MDS tries to enforce a limit on the total key/values in extended
attributes. However, this limit is enforced only if doing a synchronous
operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
doesn't have a chance to enforce these limits.
This patch adds support for decoding the xattrs maximum size setting that is
distributed in the mdsmap. Then, when setting an xattr, the kernel client
will revert to do a synchronous operation if that maximum size is exceeded.
While there, fix a dout() that would trigger a printk warning:
[ 98.718078] ------------[ cut here ]------------
[ 98.719012] precision 65536 too large
[ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
...
Link: https://tracker.ceph.com/issues/55725
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
And for the 'Xs' caps for getxattr we will also choose the auth MDS,
because the MDS side code is buggy due to setxattr won't notify the
replica MDSes when the values changed and the replica MDS will return
the old values. Though we will fix it in MDS code, but this still
makes sense for old ceph.
Link: https://tracker.ceph.com/issues/55331
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the connection was accidently closed due to the socket issue or
something else the clients will try to open the opened sessions, the
MDSes will send the session open reply one more time if the clients
support the notify feature.
When the clients retry to open the sessions the s_seq will be 0 as
default, we need to update it anyway.
Link: https://tracker.ceph.com/issues/53911
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In async unlink case the kclient won't wait for the first reply
from MDS and just drop all the links and unhash the dentry and then
succeeds immediately.
For any new create/link/rename,etc requests followed by using the
same file names we must wait for the first reply of the inflight
unlink request, or the MDS possibly will fail these following
requests with -EEXIST if the inflight async unlink request was
delayed for some reasons.
And the worst case is that for the none async openc request it will
successfully open the file if the CDentry hasn't been unlinked yet,
but later the previous delayed async unlink request will remove the
CDenty. That means the just created file is possiblly deleted later
by accident.
We need to wait for the inflight async unlink requests to finish
when creating new files/directories by using the same file names.
Link: https://tracker.ceph.com/issues/55332
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Compare dentry name with case-exact name, return true if names
are same, or false.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This macro was added but never be used. And check the ceph code
there has another CEPHFS_FEATURES_MDS_REQUIRED but always be empty.
We should clean up all this related code, which make no sense but
introducing confusion.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Feature bits have to be encoded into the correct locations. This hasn't
been an issue so far because the only hole in the feature bits was in bit
10 (CEPHFS_FEATURE_RECLAIM_CLIENT), which is located in the 2nd byte. When
adding more bits that go beyond the this 2nd byte, the bug will show up.
[xiubli: remove incorrect comment for CEPHFS_FEATURES_CLIENT_SUPPORTED]
Fixes: 9ba1e22453 ("ceph: allocate the correct amount of extra bytes for the session features")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems just call fscrypt_set_context on new inodes, which
usually causes a setxattr. That's a bit late for ceph, which can send
along a full set of attributes with the create request.
Doing so allows it to avoid race windows that where the new inode could
be seen by other clients without the crypto context attached. It also
avoids the separate round trip to the server.
Refactor the fscrypt code a bit to allow us to create a new crypto
context, attach it to the inode, and write it to the buffer, but without
calling set_context on it. ceph can later use this to marshal the
context into the attributes we send along with the create request.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For ceph, we want to use our own scheme for handling filenames that are
are longer than NAME_MAX after encryption and Base64 encoding. This
allows us to have a consistent view of the encrypted filenames for
clients that don't support fscrypt and clients that do but that don't
have the key.
Currently, fs/crypto only supports encrypting filenames using
fscrypt_setup_filename, but that also handles encoding nokey names. Ceph
can't use that because it handles nokey names in a different way.
Export fscrypt_fname_encrypt. Rename fscrypt_fname_encrypted_size to
__fscrypt_fname_encrypted_size and add a new wrapper called
fscrypt_fname_encrypted_size that takes an inode argument rather than a
pointer to a fscrypt_policy union.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
inode_insert5 currently looks at I_CREATING to decide whether to insert
the inode into the sb list. This test is a bit ambiguous, as I_CREATING
state is not directly related to that list.
This test is also problematic for some upcoming ceph changes to add
fscrypt support. We need to be able to allocate an inode using new_inode
and insert it into the hash later iff we end up using it, and doing that
now means that we double add it and corrupt the list.
What we really want to know in this test is whether the inode is already
in its superblock list, and then add it if it isn't. Have it test for
list_empty instead and ensure that we always initialize the list by
doing it in inode_init_once. It's only ever removed from the list with
list_del_init, so that should be sufficient.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- Check the IBPB feature flag before enabling IBPB in firmware calls
because cloud vendors' fantasy when it comes to creating guest
configurations is unlimited
- Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV
doesn't need it anymore
- Remove dead CONFIG_* items
-----BEGIN PGP SIGNATURE-----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=fEYI
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Update the 'mitigations=' kernel param documentation
- Check the IBPB feature flag before enabling IBPB in firmware calls
because cloud vendors' fantasy when it comes to creating guest
configurations is unlimited
- Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV
doesn't need it anymore
- Remove dead CONFIG_* items
* tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed
x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available
Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV"
x86/configs: Update configs in x86_debug.config
-----BEGIN PGP SIGNATURE-----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=SBw2
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Avoid rwsem lockups in certain situations when handling the handoff
bit
* tag 'locking_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter
order to accomodate an HPE BIOS which sets only the device but not the
bank
- Two forgotten fixes to synopsys_edac when handling error interrupts
-----BEGIN PGP SIGNATURE-----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=G2Tm
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Relax the condition under which the DIMM label in ghes_edac is set in
order to accomodate an HPE BIOS which sets only the device but not
the bank
- Two forgotten fixes to synopsys_edac when handling error interrupts
* tag 'edac_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ghes: Set the DIMM label unconditionally
EDAC/synopsys: Re-enable the error interrupts on v3 hw
EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hw
Last set of ARM fixes for 5.19:
- fix for MAX_DMA_ADDRESS overflow
- fix for find_*_bit performing an out of bounds memory access
-----BEGIN PGP SIGNATURE-----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=7ieJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Last set of ARM fixes for 5.19:
- fix for MAX_DMA_ADDRESS overflow
- fix for find_*_bit performing an out of bounds memory access"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: findbit: fix overflowing offset
ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow
With commit d257cc8cb8 ("locking/rwsem: Make handoff bit handling more
consistent"), the writer that sets the handoff bit can be interrupted
out without clearing the bit if the wait queue isn't empty. This disables
reader and writer optimistic lock spinning and stealing.
Now if a non-first writer in the queue is somehow woken up or a new
waiter enters the slowpath, it can't acquire the lock. This is not the
case before commit d257cc8cb8 as the writer that set the handoff bit
will clear it when exiting out via the out_nolock path. This is less
efficient as the busy rwsem stays in an unlock state for a longer time.
In some cases, this new behavior may cause lockups as shown in [1] and
[2].
This patch allows a non-first writer to ignore the handoff bit if it
is not originally set or initiated by the first waiter. This patch is
shown to be effective in fixing the lockup problem reported in [1].
[1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/
[2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/
Fixes: d257cc8cb8 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuSoqQAKCRDdBJ7gKXxA
jhXLAP9LwWGqHPDTJEdJByCQY00DM5hmVT6qycAVjySkXTIGSwD/XpAS/kPuiaMW
Q+MmXG4F0DQFYyBhalA1AfyytgFUXAs=
=8KZO
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Two hotfixes, both cc:stable"
* tag 'mm-hotfixes-stable-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hmm: fault non-owner device private entries
page_alloc: fix invalid watermark check on a negative value
nouveau:
- page migration fix
simpledrm:
- fix mode_valid return value
-----BEGIN PGP SIGNATURE-----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=Cjm+
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Maxime had the dog^Wmailing list server eat his homework^Wmisc pull
request.
Two more small fixes, one in nouveau svm code and the other in
simpledrm.
nouveau:
- page migration fix
simpledrm:
- fix mode_valid return value"
* tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drm:
nouveau/svm: Fix to migrate all requested pages
drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()
migration in nouveau
-----BEGIN PGP SIGNATURE-----
iHUEABMIAB0WIQTXEe0+DlZaRlgM8LOIQ8rmN6G3ywUCYuOr0wAKCRCIQ8rmN6G3
yxDvAQCFEEW+ICI4ERsUUViWSksYUQ2vQxw5fcMULoVF3IiOSwD/eEFxxQkCcMyq
xsHi7DZhfpu2nukCm5HvvRRIczb2sF4=
=zth0
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2022-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix to fix simpledrm mode_valid return value, and one for page
migration in nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729094514.sfzhc3gqjgwgal62@penduick
Four fixes, three in drivers. The two biggest fixes are ufs and the
remaining driver and core fix are small and obvious (and the core fix
is low risk).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuQu2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQ+vAQCtzbtY
kY4Lg3jOVSgvXT220sCVnOoXJKHmORVWm7XXsAEAjVFLTVGhh/Voxlkhl/lxGnKV
DJQWSdq6MjoxK56z2a4=
=GGBX
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, three in drivers.
The two biggest fixes are ufs and the remaining driver and core fix
are small and obvious (and the core fix is low risk)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix a race condition related to device management
scsi: core: Fix warning in scsi_alloc_sgtables()
scsi: ufs: host: Hold reference returned by of_parse_phandle()
scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown
If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a
device private PTE is found, the hmm_range::dev_private_owner page is used
to determine if the device private page should not be faulted in.
However, if the device private page is not owned by the caller,
hmm_range_fault() returns an error instead of calling migrate_to_ram() to
fault in the page.
For example, if a page is migrated to GPU private memory and a RDMA fault
capable NIC tries to read the migrated page, without this patch it will
get an error. With this patch, the page will be migrated back to system
memory and the NIC will be able to read the data.
Link: https://lkml.kernel.org/r/20220727000837.4128709-2-rcampbell@nvidia.com
Link: https://lkml.kernel.org/r/20220725183615.4118795-2-rcampbell@nvidia.com
Fixes: 08ddddda66 ("mm/hmm: check the device private page owner in hmm_range_fault()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reported-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There was a report that a task is waiting at the
throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was
increasing.
This is a bug where zone_watermark_fast returns true even when the free
is very low. The commit f27ce0e140 ("page_alloc: consider highatomic
reserve in watermark fast") changed the watermark fast to consider
highatomic reserve. But it did not handle a negative value case which
can be happened when reserved_highatomic pageblock is bigger than the
actual free.
If watermark is considered as ok for the negative value, allocating
contexts for order-0 will consume all free pages without direct reclaim,
and finally free page may become depleted except highatomic free.
Then allocating contexts may fall into throttle_direct_reclaim. This
symptom may easily happen in a system where wmark min is low and other
reclaimers like kswapd does not make free pages quickly.
Handle the negative case by using MIN.
Link: https://lkml.kernel.org/r/20220725095212.25388-1-jaewon31.kim@samsung.com
Fixes: f27ce0e140 ("page_alloc: consider highatomic reserve in watermark fast")
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Reported-by: GyeongHwan Hong <gh21.hong@samsung.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix addresses for bss symbols, describing variables used in resolving data
access in tools such as 'perf c2c' and 'perf mem'.
- Skip symbols if SHF_ALLOC flag is not set, a technique used for
listing deprecated symbols, its addresses are zeros, so not useful.
- Remove undefined behavior from bpf_perf_object__next() when
dealing with an empty bpf_objects_list list.
- Make a ARM CoreSight disasm script work with both python2 and python3.
- Sync x86's cpufeatures header with with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYuQG9QAKCRCyPKLppCJ+
JxtPAP9KlHo6mrPNtjly6jLJ0VvbS2NoJAg8gY1oIJBx68jE2QD+KRAZ7g6XaUuo
4c0BGm41QFyCIrUCDHMJhGJGI6g7NwI=
=ktD4
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix addresses for bss symbols, describing variables used in resolving
data access in tools such as 'perf c2c' and 'perf mem'.
- Skip symbols if SHF_ALLOC flag is not set, a technique used for
listing deprecated symbols, its addresses are zeros, so not useful.
- Remove undefined behavior from bpf_perf_object__next() when dealing
with an empty bpf_objects_list list.
- Make a ARM CoreSight disasm script work with both python2 and
python3.
- Sync x86's cpufeatures header with with the kernel sources.
* tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Remove undefined behavior from bpf_perf_object__next()
perf symbol: Skip symbols if SHF_ALLOC flag is not set
perf symbol: Correct address for bss symbols
perf scripts python: Let script to be python2 compliant
tools headers cpufeatures: Sync with the kernel sources
Just one commit to suppress a spurious warning added during the 5.19 cycle.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYuQfNg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGdjFAQDAPPlHskr1oC6d2k2nqPNEzEpOq1LWLxRK/hR2
dddxsgD+KV0GMGb43W5Au2lbscze1WNM9jeanpofRoyV+l1gyQA=
=hlX7
-----END PGP SIGNATURE-----
Merge tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one commit to suppress a spurious warning added during the 5.19
cycle"
* tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Avoid a false warning in unbind_workers()
Make some false positive RCU splats resulting from a recent intel_idle
driver change go away (Waiman Long).
-----BEGIN PGP SIGNATURE-----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=tCE+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make some false positive RCU splats resulting from a recent intel_idle
driver change go away (Waiman Long)"
* tag 'pm-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Fix false positive RCU splats due to incorrect hardirqs state
Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible
fails and trigger the false warning.
Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs.
It is very easy to trigger the warning:
Set wq_unbound_cpumask to a small set of CPUs.
Offline all the CPUs of wq_unbound_cpumask.
Offline an extra CPU and trigger the warning.
Fixes: 10a5a651e3 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* A build fix for "make vdso_install" that avoids an issue trying to
install the compat VDSO.
-----BEGIN PGP SIGNATURE-----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=JmTV
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A build fix for 'make vdso_install' that avoids an issue trying to
install the compat VDSO"
* tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: compat: vdso: Fix vdso_install target
-----BEGIN PGP SIGNATURE-----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=rqgi
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix cache size calculation, stack protection attributes, ptrace's
fpr_set and "ROM Size" in boardinfo
- Some cleanups and improvements of assembly
- Some cleanups of unused code and useless code
* tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix wrong "ROM Size" of boardinfo
LoongArch: Fix missing fcsr in ptrace's fpr_set
LoongArch: Fix shared cache size calculation
LoongArch: Disable executable stack by default
LoongArch: Remove unused variables
LoongArch: Remove clock setting during cpu hotplug stage
LoongArch: Remove useless header compiler.h
LoongArch: Remove several syntactic sugar macros for branches
LoongArch: Re-tab the assembly files
LoongArch: Simplify "BGT foo, zero" with BGTZ
LoongArch: Simplify "BLT foo, zero" with BLTZ
LoongArch: Simplify "BEQ/BNE foo, zero" with BEQZ/BNEZ
LoongArch: Use the "move" pseudo-instruction where applicable
LoongArch: Use the "jr" pseudo-instruction where applicable
LoongArch: Use ABI names of registers where appropriate
- Re-enable the new amdgpu display engine for powerpc, as long as the compiler is
correctly configured.
- Disable stack variable initialisation in prom_init to fix GCC 12 allmodconfig.
Thanks to: Dan Horák, Sudip Mukherjee.
-----BEGIN PGP SIGNATURE-----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=u93i
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Re-enable the new amdgpu display engine for powerpc, as long as the
compiler is correctly configured.
- Disable stack variable initialisation in prom_init to fix GCC 12
allmodconfig.
Thanks to Dan Horák and Sudip Mukherjee.
* tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
drm/amdgpu: Re-enable DCN for 64-bit powerpc
powerpc/64s: Disable stack variable initialisation for prom_init
We can see the "ROM Size" is different in the following outputs:
[root@linux loongson]# cat /sys/firmware/loongson/boardinfo
BIOS Information
Vendor : Loongson
Version : vUDK2018-LoongArch-V2.0.pre-beta8
ROM Size : 63 KB
Release Date : 06/15/2022
Board Information
Manufacturer : Loongson
Board Name : Loongson-LS3A5000-7A1000-1w-A2101
Family : LOONGSON64
[root@linux loongson]# dmidecode | head -11
...
Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
Vendor: Loongson
Version: vUDK2018-LoongArch-V2.0.pre-beta8
Release Date: 06/15/2022
ROM Size: 4 MB
According to "BIOS Information (Type 0) structure" in the SMBIOS
Reference Specification [1], it shows 64K * (n+1) is the size of
the physical device containing the BIOS if the size is less than
16M.
Additionally, we can see the related code in dmidecode [2]:
u64 s = { .l = (code1 + 1) << 6 };
So the output of dmidecode is correct, the output of boardinfo
is wrong, fix it.
By the way, at present no need to consider the size is 16M or
greater on LoongArch, because it is usually 4M or 8M which is
enough to use.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
[2] https://git.savannah.nongnu.org/cgit/dmidecode.git/tree/dmidecode.c#n347
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In file ptrace.c, function fpr_set does not copy fcsr data from ubuf
to kbuf. That's the reason why fcsr cannot be modified by ptrace.
This patch fixs this problem and allows users using ptrace to modify
the fcsr.
Co-developed-by: Xu Li <lixu@loongson.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Current calculation of shared cache size is from the node (die) scope,
but we hope 'lscpu' to show the shared cache size of the whole package
for multi-die chips (e.g., Loongson-3C5000L, which contains 4 dies in
one package). So fix it by multiplying nodes_per_package.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Disable executable stack for LoongArch by default, as all modern
architectures do.
Reported-by: Andreas Schwab <schwab@suse.de>
Suggested-by: WANG Xuerui <git@xen0n.name>
Link: https://sourceware.org/pipermail/binutils/2022-July/121992.html
Tested-by: WANG Xuerui <git@xen0n.name>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There are some variables never used or referenced, this patch
removes these varaibles and make the code cleaner.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
