BUG: unable to handle kernel NULL pointer dereference at 00000000000000d1
Call Trace:
? napi_gro_frags+0xa7/0x2c0
tun_get_user+0xb50/0xf20
tun_chr_write_iter+0x53/0x70
new_sync_write+0xff/0x160
vfs_write+0x191/0x1e0
__x64_sys_write+0x5e/0xd0
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I think there is a subtle race between sending a packet via tap and
attaching it:
CPU0: CPU1:
tun_chr_ioctl(TUNSETIFF)
tun_set_iff
tun_attach
rcu_assign_pointer(tfile->tun, tun);
tun_fops->write_iter()
tun_chr_write_iter
tun_napi_alloc_frags
napi_get_frags
napi->skb = napi_alloc_skb
tun_napi_init
netif_napi_add
napi->skb = NULL
napi->skb is NULL here
napi_gro_frags
napi_frags_skb
skb = napi->skb
skb_reset_mac_header(skb)
panic()
Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to
be the last thing we do in tun_attach(); this should guarantee that when we
call tun_get() we always get an initialized object.
v2 changes:
* remove extra napi_mutex locks/unlocks for napi operations
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 90e33d4594 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'dev' is non NULL when the addr_len check triggers so it must goto a label
that does the dev_put otherwise dev will have a leaked refcount.
This bug causes the ib_ipoib module to become unloadable when using
systemd-network as it triggers this check on InfiniBand links.
Fixes: 99137b7888 ("packet: validate address length")
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for
unconnected UDP sockets with [::1] _after_ cgroup BPF invocation,
from Andrey.
2) Follow-up fix to the speculation fix where we need to reject a
corner case for sanitation when ptr and scalars are mixed in the
same alu op. Also, some unrelated minor doc fixes, from Daniel.
3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup()
by not assuming fd of zero value to be the result of an error
case, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VLAN is deleted from a bridge port we should not change the PVID
unless the deleted VLAN is the PVID.
Fixes: fe9ccc785d ("mlxsw: spectrum_switchdev: Don't batch VLAN operations")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running the test on the Spectrum ASIC the generated packets are
counted on the ingress filter and injected back to the pipeline because
of the 'pass' action. The router block then drops the packets due to
checksum error, as the test generates packets with zero checksum.
When running the test on an emulator that is not as strict about
checksum errors the test fails since packets are counted twice. Once by
the emulated ASIC on its ingress filter and again by the kernel as the
emulator does not perform checksum validation and allows the packets to
be trapped by a matching host route.
Fix this by changing the action to 'drop', which will prevent the packet
from continuing further in the pipeline to the router block.
For veth pairs this change is essentially a NOP given packets are only
processed once (by the kernel).
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding / deleting VLANs to / from a bridge port, the bridge driver
first tries to propagate the information via switchdev and falls back to
the 8021q driver in case the underlying driver does not support
switchdev. This can result in a memory leak [1] when VXLAN and mlxsw
ports are enslaved to the bridge:
$ ip link set dev vxlan0 master br0
# No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev
# notification and the bridge driver adds the VLAN on 'vxlan0' via the
# 8021q driver
$ bridge vlan add vid 10 dev vxlan0 pvid untagged
# mlxsw port is enslaved to the bridge
$ ip link set dev swp1 master br0
# mlxsw processes the switchdev notification and the 8021q driver is
# skipped
$ bridge vlan del vid 10 dev vxlan0
This results in 'struct vlan_info' and 'struct vlan_vid_info' being
leaked, as they were allocated by the 8021q driver during VLAN addition,
but never freed as the 8021q driver was skipped during deletion.
Fix this by introducing a new VLAN private flag that indicates whether
the VLAN was added on the port by switchdev or the 8021q driver. If the
VLAN was added by the 8021q driver, then we make sure to delete it via
the 8021q driver as well.
[1]
unreferenced object 0xffff88822d20b1e8 (size 256):
comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s)
hex dump (first 32 bytes):
e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330
[<00000000e0178b02>] vlan_vid_add+0x661/0x920
[<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00
[<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90
[<000000003535392c>] br_vlan_info+0x132/0x410
[<00000000aedaa9dc>] br_afspec+0x75c/0x870
[<00000000f5716133>] br_setlink+0x3dc/0x6d0
[<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30
[<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80
[<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0
[<000000008be8d614>] rtnetlink_rcv+0x21/0x30
[<000000009ab2ca25>] netlink_unicast+0x52f/0x740
[<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50
[<000000005d1e2050>] sock_sendmsg+0xbe/0x120
[<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0
[<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270
unreferenced object 0xffff888227454308 (size 32):
comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s)
hex dump (first 32 bytes):
88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -....
81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330
[<0000000018050631>] vlan_vid_add+0x3e6/0x920
[<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00
[<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90
[<000000003535392c>] br_vlan_info+0x132/0x410
[<00000000aedaa9dc>] br_afspec+0x75c/0x870
[<00000000f5716133>] br_setlink+0x3dc/0x6d0
[<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30
[<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80
[<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0
[<000000008be8d614>] rtnetlink_rcv+0x21/0x30
[<000000009ab2ca25>] netlink_unicast+0x52f/0x740
[<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50
[<000000005d1e2050>] sock_sendmsg+0xbe/0x120
[<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0
[<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270
Fixes: d70e42b22d ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: bridge@lists.linux-foundation.org
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case for the issue fixed by previous commit. In case the
offloading of an unsupported VxLAN tunnel was triggered by adding the
mapped VLAN to a local port, then error should be returned to the user.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a VLAN on a port can trigger the offload of a VXLAN tunnel which
is already a member in the VLAN. In case the configuration of the VXLAN
is not supported, the driver would return -EOPNOTSUPP.
This is problematic since bridge code does not interpret this as error,
but rather that it should try to setup the VLAN using the 8021q driver
instead of switchdev.
Fixes: d70e42b22d ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers are not supposed to return errors in switchdev commit phase if
they returned OK in prepare phase. Otherwise, a WARNING is emitted.
However, when the offloading of a VXLAN tunnel is triggered by the
addition of a VLAN on a local port, it is not possible to guarantee that
the commit phase will succeed without doing a lot of work.
In these cases, the artificial division between prepare and commit phase
does not make sense, so simply do the work in the prepare phase.
Fixes: d70e42b22d ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in:
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined
reference to `vxlan_fdb_find_uc'
Add Kconfig dependency to enforce usable configurations.
Fixes: 1231e04f5b ("mlxsw: spectrum_switchdev: Add support for VxLAN encapsulation")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave()
is called and prevent from possible EMAD error.
Fixes: 0d65fc1304 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removal of the mlxsw driver on Spectrum-2 platforms hits an ASSERT_RTNL()
in Spectrum-2 ACL Bloom filter and in ERP removal paths. This happens
because the multicast router implementation in Spectrum-2 relies on ACLs.
Taking the RTNL lock upon driver removal is useless since the driver first
removes its ports and unregisters from notifiers so concurrent writes
cannot happen at that time. The assertions were originally put as a
reminder for future work involving ERP background optimization, but having
these assertions only during addition serves this purpose as well.
Therefore remove the ASSERT_RTNL() in both places related to ERP and Bloom
filter removal.
Fixes: cf7221a4f5 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert().
In case of C-TCAM HW insertion error, the opposite action should take
place.
Add error handling case in which the C-TCAM region entry is removed, by
calling cregion->ops->entry_remove().
Fixes: a0a777b940 ("mlxsw: spectrum_acl: Start using A-TCAM")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This soft dependency works around an issue where sometimes the genphy
driver is used instead of the dedicated PHY driver. The root cause of
the issue isn't clear yet. People reported the unloading/re-loading
module r8169 helps, and also configuring this soft dependency in
the modprobe config files. Important just seems to be that the
realtek module is loaded before r8169.
Once this has been applied preliminary fix 38af4b903210 ("net: phy:
add workaround for issue where PHY driver doesn't bind to the device")
will be removed.
Fixes: f1e911d5d0 ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been noticed that some phys do not have the registers
required by the previous implementation.
To fix this, instead of using phy_read, the required information
is extracted from the phy_device structure.
fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ioctl command is read/write (or just read, if the fact that user space
writes n_samples field is ignored).
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise it is impossible to use it for something else, as it will break
userspace that puts garbage there.
The same check should be done in other structures, but the fact that
data in reserved fields is ignored is already part of the kernel ABI.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for
unconnected UDP sockets with [::1] _after_ cgroup BPF invocation,
from Andrey.
2) Follow-up fix to the speculation fix where we need to reject a
corner case for sanitation when ptr and scalars are mixed in the
same alu op. Also, some unrelated minor doc fixes, from Daniel.
3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup()
by not assuming fd of zero value to be the result of an error
case, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Two trivial doc follow-ups to i) remove deprecated kern_version
mentioning in the design qa and ii) to mention stand-alone build
and license of libbpf. Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given this came up couple of times, add a note to libbpf's readme
about the semi-automated mirror for a stand-alone build which is
officially managed by BPF folks. While at it, also explicitly state
the libbpf license in the readme file.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update the bpf_design_QA.rst to also reflect recent changes in
6c4fc209fc ("bpf: remove useless version check for prog load").
Suggested-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We have some tests that assume create_and_get_cgroup returns -1 on error
which is incorrect (it returns 0 on error). Since fd might be zero in
general case, change create_and_get_cgroup to return -1 on error
and fix the users that assume 0 on error.
Fixes: f269099a7e ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper")
Fixes: 7d2c6cfc54 ("bpf: use --cgroup in test_suite if supplied")
v2:
- instead of fixing the uses that assume -1 on error, convert the users
that assume 0 on error (fd might be zero in general case)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This driver requires regmap or the compile fails:
drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’
const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
Add it to kconfig.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling DNAT'ed packets on a bridge device, the neighbour cache entry
from lookup was used without checking its state. It means that a cache entry
in the NUD_STALE state will be used directly instead of entering the NUD_DELAY
state to confirm the reachability of the neighbor.
This problem becomes worse after commit 2724680bce ("neigh: Keep neighbour
cache entries if number of them is small enough."), since all neighbour cache
entries in the NUD_STALE state will be kept in the neighbour table as long as
the number of cache entries does not exceed the value specified in gc_thresh1.
This commit validates the state of a neighbour cache entry before using
the entry.
Signed-off-by: JianJhen Chen <kchen@synology.com>
Reviewed-by: JinLin Chen <jlchen@synology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a memory leak in case genlmsg_put fails.
Fix this by freeing *args* before return.
Addresses-Coverity-ID: 1476406 ("Resource leak")
Fixes: 46273cf7e0 ("tipc: fix a missing check of genlmsg_put")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is unreadable enough without indenting mismatches
and unnecessary line breaks.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid log spam caused by trying to read counters from the chip whilst
it is in a PCI power-save state.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421
Fixes: 1ef7286e7f ("r8169: Dereference MMIO address immediately before use")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN
frame modification rule that makes the data length code a higher value than
the available CAN frame data size. In combination with a configured checksum
calculation where the result is stored relatively to the end of the data
(e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in
skb_shared_info) can be rewritten which finally can cause a system crash.
Michael Kubecek suggested to drop frames that have a DLC exceeding the
available space after the modification process and provided a patch that can
handle CAN FD frames too. Within this patch we also limit the length for the
checksum calculations to the maximum of Classic CAN data length (8).
CAN frames that are dropped by these additional checks are counted with the
CGW_DELETED counter which indicates misconfigurations in can-gw rules.
This fixes CVE-2019-3701.
Reported-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Reported-by: Marcus Meissner <meissner@suse.de>
Suggested-by: Michal Kubecek <mkubecek@suse.cz>
Tested-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
pci_{,un}map_sg are deprecated and replaced by dma_{,un}map_sg. This is
especially relevant since the rest of the driver uses the DMA API. Fix
the driver to use the replacement APIs.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch solves a crash at the time of mlx4 driver unload or system
shutdown. The crash occurs because dma_alloc_coherent() returns one
value in mlx4_alloc_icm_coherent(), but a different value is passed to
dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because
when allocated, that pointer is passed to sg_set_buf() to record it,
then when freed it is re-calculated by calling
lowmem_page_address(sg_page()) which returns a different value. Solve
this by recording the value that dma_alloc_coherent() returns, and
passing this to dma_free_coherent().
This patch is roughly equivalent to commit 378efe798e ("RDMA/hns: Get
rid of page operation after dma_alloc_coherent").
Based-on-code-from: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Follow-up fix to 979d63d50c ("bpf: prevent out of bounds speculation
on pointer arithmetic") in order to reject a corner case for sanitation
when ptr / scalars are mixed in the same alu op.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add couple of test_verifier tests to check sanitation of alu op insn
with pointer and scalar type coming from different paths. This also
includes BPF insns of the test reproducer provided by Jann Horn.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While 979d63d50c ("bpf: prevent out of bounds speculation on pointer
arithmetic") took care of rejecting alu op on pointer when e.g. pointer
came from two different map values with different map properties such as
value size, Jann reported that a case was not covered yet when a given
alu op is used in both "ptr_reg += reg" and "numeric_reg += reg" from
different branches where we would incorrectly try to sanitize based
on the pointer's limit. Catch this corner case and reject the program
instead.
Fixes: 979d63d50c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I realized the last patch calls dev_get_by_index_rcu in a branch not
holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock.
Fixes: ec90ad3349 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Ignatov says:
====================
The patch set fixes BSD'ism in sys_sendmsg to rewrite unspecified
destination IPv6 for unconnected UDP sockets in sys_sendmsg with [::1] in
case when either CONFIG_CGROUP_BPF is enabled or when sys_sendmsg BPF hook
sets destination IPv6 to [::].
Patch 1 is the fix and provides more details.
Patch 2 adds two test cases to verify the fix.
v1->v2:
* Fix compile error in patch 1.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to
rewrite destination IPv6 = [::] with [::1] (BSD'ism).
Two test cases are added:
1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program
doesn't touch it.
2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program
rewrites it with [::].
In both cases [::1] is used by sys_sendmsg code eventually and datagram
is sent successfully for unconnected UDP socket.
Example of relevant output:
Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS]
Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since 876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).
This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.
It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).
The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to c5ee066333 ("ipv6: Consider sk_bound_dev_if when binding a
socket to an address"), binding a socket to v4 mapped addresses needs to
consider if the socket is bound to a device.
This problem also exists from the beginning of git history.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new ability added to the driver to use mii_bus to handle MII related
ioctls is causing compile issues when the driver is compiled into the
kernel (i.e. not a module).
The problem was in selecting MDIO_DEVICE instead of the preferred PHYLIB
Kconfig option. The reason being that MDIO_DEVICE had a dependency on
PHYLIB and would be compiled as a module when PHYLIB was a module, no
matter whether ixgbe was compiled into the kernel.
CC: Dave Jones <davej@codemonkey.org.uk>
CC: Steve Douthit <stephend@silicom-usa.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot was able to crash one host with the following stack trace :
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8625 Comm: syz-executor4 Not tainted 4.20.0+ #8
RIP: 0010:dev_net include/linux/netdevice.h:2169 [inline]
RIP: 0010:icmp6_send+0x116/0x2d30 net/ipv6/icmp.c:426
icmpv6_send
smack_socket_sock_rcv_skb
security_sock_rcv_skb
sk_filter_trim_cap
__sk_receive_skb
dccp_v6_do_rcv
release_sock
This is because a RX packet found socket owned by user and
was stored into socket backlog. Before leaving RCU protected section,
skb->dev was cleared in __sk_receive_skb(). When socket backlog
was finally handled at release_sock() time, skb was fed to
smack_socket_sock_rcv_skb() then icmp6_send()
We could fix the bug in smack_socket_sock_rcv_skb(), or simply
make icmp6_send() more robust against such possibility.
In the future we might provide to icmp6_send() the net pointer
instead of infering it.
Fixes: d66a8acbda ("Smack: Inform peer that IPv6 traffic has been blocked")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ade446403b ("net: ipv4: do not handle duplicate fragments as
overlapping") changed IPv4 defragmentation so that duplicate fragments,
as well as _some_ fragments completely covered by previously delivered
fragments, do not lead to the whole frag queue being discarded. This
makes the existing ip_defrag selftest flaky.
This patch
* makes sure that negative IPv4 defrag tests generate truly overlapping
fragments that trigger defrag queue drops;
* tests that duplicate IPv4 fragments do not trigger defrag queue drops;
* makes a couple of minor tweaks to the test aimed at increasing its code
coverage and reduce flakiness.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds MTU default value to qmap network interface in
order to avoid "RTNETLINK answers: No buffer space available"
error when setting an ipv6 address.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns: Bugfixes for HNS driver
This patchset includes bugfixes for the HNS ethernet controller driver.
Every patch is independent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 308c6cafde ("net: hns: All ports can not work when insmod hns ko
after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net",
this method is effective, but in the branch of "net-next", it will cause
a WARNING when hns modules loaded, reference to commit 2b3e88ea65 ("net:
phy: improve phy state checking"):
[10.092168] ------------[ cut here ]------------
[10.092171] called from state READY
[10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854
phy_stop+0x90/0xb0
[10.092192] Modules linked in:
[10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-20181220 #1
[10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI
16.12 Release 05/15/2017
[10.092202] pstate: 60000005 (nZCv daif -PAN -UAO)
[10.092205] pc : phy_stop+0x90/0xb0
[10.092208] lr : phy_stop+0x90/0xb0
[10.092209] sp : ffff00001159ba90
[10.092212] x29: ffff00001159ba90 x28: 0000000000000007
[10.092215] x27: ffff000011180068 x26: ffff0000110a5620
[10.092218] x25: ffff0000113b6000 x24: ffff842f96dac000
[10.092221] x23: 0000000000000000 x22: 0000000000000000
[10.092223] x21: ffff841fb8425e18 x20: ffff801fb3a56438
[10.092226] x19: ffff801fb3a56000 x18: ffffffffffffffff
[10.092228] x17: 0000000000000000 x16: 0000000000000000
[10.092231] x15: ffff00001122d6c8 x14: ffff00009159b7b7
[10.092234] x13: ffff00001159b7c5 x12: ffff000011245000
[10.092236] x11: 0000000005f5e0ff x10: ffff00001159b750
[10.092239] x9 : 00000000ffffffd0 x8 : 0000000000000465
[10.092242] x7 : ffff0000112457f8 x6 : ffff0000113bd7ce
[10.092245] x5 : 0000000000000000 x4 : 0000000000000000
[10.092247] x3 : 00000000ffffffff x2 : ffff000011245828
[10.092250] x1 : 4b5860bd05871300 x0 : 0000000000000000
[10.092253] Call trace:
[10.092255] phy_stop+0x90/0xb0
[10.092260] hns_nic_init_phy+0xf8/0x110
[10.092262] hns_nic_try_get_ae+0x4c/0x3b0
[10.092264] hns_nic_dev_probe+0x1fc/0x480
[10.092268] platform_drv_probe+0x50/0xa0
[10.092271] really_probe+0x1f4/0x298
[10.092273] driver_probe_device+0x58/0x108
[10.092275] __driver_attach+0xdc/0xe0
[10.092278] bus_for_each_dev+0x74/0xc8
[10.092280] driver_attach+0x20/0x28
[10.092283] bus_add_driver+0x1b8/0x228
[10.092285] driver_register+0x60/0x110
[10.092288] __platform_driver_register+0x40/0x48
[10.092292] hns_nic_dev_driver_init+0x18/0x20
[10.092296] do_one_initcall+0x5c/0x180
[10.092299] kernel_init_freeable+0x198/0x240
[10.092303] kernel_init+0x10/0x108
[10.092306] ret_from_fork+0x10/0x18
[10.092308] ---[ end trace 1396dd0278e397eb ]---
This WARNING occurred because of calling phy_stop before phy_start.
The root cause of the problem in commit '308c6cafde01' is:
Reference to hns_nic_init_phy, the flag phydev->supported is changed after
phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is
loaded, so will not change Fiber Port power(Reference to marvell.c), which
is power on at default.
Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is
off when removing hns modules.
When hns modules installed again, the flag phydev->supported is default
value 0x6ff, so will not change Fiber Port power(now is off), causing mac
link not up problem.
So the solution is change phy flags before phy_connect_direct.
Fixes: 308c6cafde ("net: hns: All ports can not work when insmod hns ko after rmmod.")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver uses GPIO descriptors only, <linux/of_gpio.h>
is not used so drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio says:
====================
Fix two further potential unbounded recursions in GUE error handlers
Patch 1/2 takes care of preventing the issue fixed by commit 11789039da
("fou: Prevent unbounded recursion in GUE error handler") also with
UDP-Lite payloads -- I just realised this might happen from a syzbot
report.
Patch 2/2 fixes the issue for both UDP and UDP-Lite on IPv6, which I also
forgot to deal with in that same commit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
